Ant question about copying dirs

HI all,
I want do copy a folder into another folder (incl. files!)
i have for example :
/app/foldera
and /app/destination/
and i want to copy folder a into destination so that it looks like this in the end:
/app/destination/foldera
I'm using ANT-151

its simply not posibble
the only option is
read each file in a folder subfolder...
adn write again ...
but is it worth whats the hell of time its going to take..
and will it be successfull...i doubt..
one can try
using runtime class called command process and pasing argument copy *.* from a b

Similar Messages

  • Follow-up on question about copying 10.4

    I only got one reply to my question about how to copy OS 10.4 from one internal drive to another and unfortunately, the response was cut short. Something about if I had another computer with Firewire, using it and that's as far as the response went. Yes, I have a  laptop and have Firewire, but still don't know how to use it to help.

    If you just wish to make a duplicate of one hard drive to another hard drive in the same G5, then do this:
    Clone using Restore Option of Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the second internal drive. Source means the internal startup drive.

  • Question About Copying Tracks From a CD Into iTunes

    Newbie here.
    I currenly have about 700 songs on my Ipod Touch. (I put them on there from several old CD's I have of Napster tunes which I obtained when Napster was, well, you know . . . let's just say I donwloaded these tunes a long, long time ago.)
    Anyway - so now I want to load a commercial CD onto my Ipod. "Spamalot," as a matter of fact. I put the CD into my computer, open up iTunes and press the magic button to import all of the tracks from the CD into iTunes. And it does it, very quickly, as a matter of fact.
    The only problem is that all of the songs on the CD (25 of them) are scattered throughout the 700 songs already in my library. I have to spend way too much time hunting them down and schlepping them into my newly created Spamalot playlist.
    Surely there is a better way to do this. I would think that I should be able to create a playlist and then load all of the songs from any CD directly into the playlist.
    How do you do that?

    What I would like to do is (1) create a playlist and then (2) copy or import tunes from a CD directly into the playlist I have just created.
    From what I am hearing, I don't think that can be done. From what I am hearing here, you must first import the tunes into your iTunes general music library and THEN move them into a playlist.
    no you can't do it directly, music must be imported into the library first, then copied into the playlist. i'm not sure why you would need to - sure it would save part of the work if you could do it all at the same time, but it's not exactly difficult to import, then create a playlist.
    you could create the playlist before you import and add the tracks in as they are importing, but that's not much easier than creating it afterwards.
    HOWEVER
    Have you considered my 'Smart Playlist' suggestion? I think this will do what you want. Smart Playlists update automatically to coincide with any relevant changes in the itunes library. If you create a Smart Playlist with the album title, as tracks that have that album title are imported into itunes, they will automatically go into the Smart Playlist.

  • Question about 'copy transactions'

    In the standard training book, there is a saying that 'When you copy transactions, the system produces a copy an ddisplays it for processing. When the copied transaction is saved, the document flow is not updated, that is, the copied transaction has no connection to the orginal transaction.'
    But how can I see the original transaction in the document flow?
    Regards,
    Anders

    Hi,
    The feature you are talking about here is known as Copy Control. You can get the whole reference of it from the following link
    http://help.sap.com/saphelp_crm60/helpdata/en/5b/e4f53911cac83ce10000000a114084/frameset.htm
    You will get the subsequent and preceding document which will be highlighted to show you the difference.
    Hope this helps.
    Thanks,
    Samantak.

  • InfoPath web forms from sharepoint 365 submission - question about copying senders on submit

    I have set up a few InfoPath web forms.  I tested including an email field when the submit is processed it will also send a copy to the email address entered in that field.  I am just seeing if there are any options available for the user to
    be able to open the file after the attachment is saved from the email if they don't have InfoPath on their machine? any way for them to save as a word doc, pdf etc?

    Hi,
    As I understand, you want to know the attachment sent with the InfoPath form email can be saved as other file types.
    The attachment sent with the InfoPath form email will stored as XML files.
    If there is no InfoPath installed, we can export the XML data to Excel, Access or PDF.
    The article is about importing and exporting form data and form templates for your reference:
    https://support.office.com/en-us/article/Introduction-to-importing-and-exporting-form-data-and-form-templates-a79500f9-0dea-423d-a66b-4d6231c0c5e4
    Best regards
    Sara Fan
    TechNet Community Support

  • Question about Copying an MSS iViews from Migrated Business Package

    I have copied the iViews from the MSS migrated content and placed in my own folder.  I then changed some of the properties on the copied iViews.  I assigned my copies to a role.  The problem is that the iViews, when ran in the portal, are still using the properties on the original iViews which I copied instead.  What have I missed?  Is there some settings I need to change after copying an iView?

    I recopied the iViews and they seemed to work correctly after that.  Portal iView copying is a bit buggy.

  • Question about "Copy To All" Feature in Color

    Is there anyway to undo the "copy to all" feature in the Primary In Room once its been clicked? On longer project it is particularly annoying to be almost done, and accidentally change all your grades with that button.

    "Undo" is a bit of a bone of contention. There should be one level of it available... but whether the "Copy To All" counts as one operation might be up for debate. For now, I'd consider it to be a showstopper. You might save some of your efforts with a "revert" command, or back up one auto-save.
    jPo

  • Question about source system copy for BW

    Dear all,
    I have a quick question about copying a source system for BW.
    We have two clients in the source ERP:
    100 Customizing
    200 Testing
    Our BW is only linked to client 200, so when we now delete client 200 and make a copy from 100 to 200, are we then still able to restore the source system connection so that our extraction will work, or will it fail, as in client 100 I have no BW related (except the cross-client-objects like datasource) information, that can be used for a possible restore of this connection.
    What is the procedure in this case?
    Thanks,
    Andreas

    Unfortunately, you will lose your source connection and need to create a new one in R/3.  You can use the same source system name in BW, but check the source system connection after the copy (SM59).  Also, I would "Restore" the source system (in BW, right-click on Source system in RSA1, and click "Restore") to insure the datasources get replicated from R/3 to BW.
    Depending on how much you want your BW and R/3 systems to be in synch, you will need to rebuild all your data providers (cubes/ODS's) from your R/3 system.  This means deleting all the data and running the initializations from scratch.  At the very least, you will need to rebuild the delta queues.
    Curious, if 100 is just for customizing, is there any data in it?  Are you just creating a new blank client 200?

  • Some questions about building  a plug in

    Hello,
    1.I'm trying to build a plug in ( for EM12c release 2 ) for my standalone java application - which exposes mbeans whom i want to collect some metrics with.
    It's been a while since i started to build it - and I asked quite a lot of quesions about it - because the documnets supplied with the EDK and
    the books ( ProgrammersGuide, ProgrammersReferece and the README file ) are not very clear to me ( I'm a newbie with EM in general .. )
    So far some of the questions got answered and were very halpfull with this long process. BUT, there are some questions that nobody answered yet.
    I'm quite "stuck" with it. I'm talking about the questions in : Re: A question about updating metadata files in plug in
    I have a deadline for this plug in ( which is very close ..) so this the reason I post this new message.
    I will appriciate any help about those questions .
    2. Regarding the above, ( hoping to have an answered soon ..) I'm trying another way to buils this plug in:
    In the README file there is this section( 3.6 : using MPCUI ) . I read the programmersReference ( chapter 8 ) and followed the instructions both in the README file and the ProgrammersReference .
    For a begining, I just wanted to modify a small thing in the example supplied ( Demo Host System ) just to get started with something .
    So i modify the file which contains the label ' Select member ... ' ( i don't remember the name of the file since the project is in my office , and I can't copy/paste ..- I think the the file icontians the name ' ConfirmationTarget .xml - it's one of the pages seen while adding a target ) .
    I i changed it , i build the project ( using FlexBuilder) but did not use ANT as it's says in the README - the eclipse IDE build this file automatically
    ( HostSystem.swf  in bin-debug dir as it says in the README ) . I copied this file to stage_dir/oms/metadata/mpcui .
    i build a new plug in ( i incremented the version of it ) - no errors, everty thing was fine .I also copied this file to the oms server ( it wasn't there before )
    and than run the commad ' emctl register oms ...' as it says in section 3.6 - and o got 'Success' eventually .
    Now, when i opened the EM console , hoping to see tge change i made ( again , it's just a change of the title of the step while adding the target , and adding another menuitem to the 3 item that were alreay there ( CPU, FS, etc ) .
    I believe wad i did is right- i mean changing in the right file and place ( there is no title like like this in any oter source file in the whole project )
    but still, I didn't see any change! it seems execatly as it was befoer the change ..
    Any idea?
    Thanks.

    Regarding your question #2. Please read my response here carefully as it covers a number of different issues.
    1. Ant is not required to build the SWF file in your plug-in. It is an OPTION. Section 8.27 describes the different development options using either Ant or FlexBuilder.
    2. You do NOT need to ever copy a SWF file to any location under the OMS runtime. You need to include it in the stage area and then either build an OPAR or use emctl to incrementally update the deployed plug-in. It has to either be deployed as part of the plug-in deployment or updated incrementally using emctl register oms metadata. Section 8.27.2.6 describes the specific steps to do this incremental update.
    Steps to update the SWF associated with demo_hostsample. These are covered in the README and in chapter 8.
    1. deploy the demo_hostsample plug-in as described in the README
    2. create an instance of the Host Sample target type through manually discovery (Add Targets->Add Non-Host Target Specifying Properties)
    3. using the demo_hostsample.zip project in Flex Builder, modify some part of the code, for example, modify the line containing label="Current Status" to label="My New Label"
    4. rebuild the SWF, to be sure you can to a Clean build of the demo_hostsample project
    5. ensure there is an updated copy of the HostSample.swf under demo_hostsample\mpcui\bin-debug (NOT bin-release, unless you Exported A Release Build)
    6. copy that updated HostSample.swf file to the location on the OMS machine where you unzipped and built the OPAR for the demo_hostsample plug-in
    7. cd to the stage/oms/metadata/mpcui directory and replace the current HostSample.swf with the one you just built (BE SURE ITS THE UPDATED FILE)
    8. execute the command "emctl register oms metadata -sysman_pwd sysman -pluginId oracle.sysman.ohs -service mpcui -file demo_hostsample_uimd_swf.xml (BE SURE TO USE THE CORRECT sysman_pwd)
    At this point you should be able to go to the homepage for the Host Sample target you created and see the changes.

  • Some questions about Muse

    First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
    The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
    It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html).  I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
    Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
    A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
    The hits from Facebook have sometimes very long links, eg.
    (http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident,  moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
    The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but  the text after export and moving cursor into it does not change color for some reason.
    I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
    The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
    The comments Disqus do not load, especially at horizontal layouts  (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
    YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
    Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
    On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
    This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
    Is it possible to make an option of  scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
    Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
    I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
    In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
    According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
    The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
    Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
    I’m using Adobe Muse 7.2 on OS X 10.9.1.
    and I'm sending Muse file to <[email protected]>

    Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
    Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
    Here is the link to the old forums- http://support.muse.adobe.com/muse

  • A lot of questions about my MacBook Air

    I am really new to re-using Apple computers.The last time I used an Apple computer was back in 1987 when the school and my family had Apple IIGS computers. I have been using PC's which reqiure Microsoft. I a lot of have questions (10 questions) about my MacBook Air and I hope you good people can and will help me.
    Product: MacBook Air
    Operating System: Mac OS X Version 10.7.4
    1) I Downloaded MacKeeper because I was fooled. I had a bad feeling just before I Downloaded it and I should have listened to my heart. However, I didn't buy it or fully Install it. It was like a test run and then they wanted me to pay almost $100 for it. Thankfully, I didn't because I read it is Malware. I spoke with an Apple Tech at Apple Care and he helped me get rid of it (or so we think). I don't see it anymore on my computer. I read it can slow down your computer. How can you tell if it's really off of the computer?
    2) When I open "Finder" and I see that there are people Sharing my computer with me. I went into AirDrop and it reads, "Other people can see your Mac as (my name) MacBook Air when their computer is nearby." I bought a HotSpot and while it's turned on and I selected it as my WI-FI connection I thought it would  get rid of these people, protect what I type, me, my items, computer, etc. But it didn't.  
    I didn't know that I have to buy a exteral CD and/or DVD Player in order to connect to the brand new Modem and Router in one by NetGear. I am so used to PCs and the CD/DVD Players being built inside.
    The people at Apple Store told me that there is an internal modem inside, but I don't know how to find it and what to do then.  Should I use a Firewall?, An AntiVirus, AntiMalware, AntiSpyware, etc. Apple Care tech told me I don't need to get an AntiVirus.
    3) Is there a new kind of Wireless Modem and Router that doesn't require a CD-ROM?
    4) When I travel or fly and I am not close to home I was told by Best Buy and Sprint that I had to buy a mobile HotSpot to use the computer (WI-FI) safely. As I typed, I have one. But it's pretty expensive and only gives me 1 hour and 15 minutes per day to Stream. What can I do to use this computer safely Online when I am out of range from a Modem and Router? What do people do when they travel on airplanes?  
    5) This compter won't let me use "Raid." I think you have to have a newer version. I hard about Raid on the radio from Leo (can't recall his last name) who's a Tech expert.
    6) Should I buy a ZipDrive? Apple Store Tech told me that I didn't need a ZipDrive. I just remember the episode of HBO's "Sex and The City" when Carrie looses everything because her copy crashed. Now, of course, I know that's a fictional show, but with PC's and Microsoft I have lost everything when it crashed, frooze up, etc. I know there's iClouds. I heard about Carbonite, but I have read the Pros and Cons about it. Mostly they are Cons about it. I just don't want to do anything wrong and mess up this computer.
    7) Should I buy a new Printer/Copier/Scanner because mine is an HP. It's not new, but it works. I even have a CD-ROM for Macs. What about the new product called, "Neat"?
    8) Is there a special product that I should buy to do Online Banking and/or other important stuff?
    9) I saw and read about iWork in the Apps Store and it sounds cool. I still have alot of friends and colleagues who still use Microsoft. Is iWork good to use? Should I Download it from the Apple Apps Store or can a buy it at Apple? Is there another Word Processing Program that is great and user friendly and will work with Macs and PCs?
    10) Should I Update the OS with OS X Mountian Lion Pro from the Apple Apps Store or buy it at Apple Store?
    In advance, I wish to thank you in this Apple Support Communites for your help.  Have a safe and happy holiday weekend!

    1) Here are instructions for removing MacKeeper. Since it mostly consists of manually looking for folders and specific files, if you follow the instructions you either fail to find what you are told to find (because your AppleCare guide gave you complete instructions which you followed) or you'll find some additional files that need to be replaced.
    2 & 3) I assume you are looking at the sidebar of a Finder window and seeing Shared and computers under it. Those are computers that you can potentionally share. To do so you'd need an account on their computer and a password. They are not sharing your computer.
    AirDrop allows you to create an adhoc network for filesharing and it only functions when you have selected the AirDop item in the SideBar. Actually doing that merely announces to computers in the same network node that your computer is available for a file to be sent to. Even then you have to explicitly allow the file to be downloaded to your computer. Similarly you'd be able to see other computers with AirDrop selected and be able to send them a file - which they'd have to accept.
    The only reason your NetGear Router comes with a CD is to install and run their 'easy' step by step configuration program. It can also be done manually with a browser. Read the manual to find the IP address you must enter to access the router's configuration menu. Apple's WiFi routers don't require a CD to install the software because the configuration software is already on your computer.
    I do have my firewall turned on. AntiVirus software isn't a bad idea - I use Sophos having tested it for a review for our local User Group and I found I liked it better than ClamAVx which is what I'd been using before. Both are free.
    4) I think you were scammed by Sprint and BestBuy. I use hotel, coffee shop, and restaurant WiFi spots and have for years. However, because they can be unsecured, I do not shop online or bank when I'm using them. I also use 1Password and don't reuse passwords so even if a sniffer should grab an account and password that's all it would get - one account.
    5) Raid doesn't really make sense with a MacBook Air - a RAID involves 2 or more disks being used as if they were one.
    6) Zip drive? No. External hard drive - yes. It isn't a question of if a computer's hard drive will malfunction, it is when. OWC has a nice selection of external drives and the Mac has a built in backup system called TimeMachine. Due to the way TimeMachine works, I've found that your TimeMachine drive should be at least twice as large - and preferably 3-4 times as large as the data you are backing up.
    7) if your printer works and it has Mountain Lion drivers, why replace it?
    8) Online banking is done with a browser - Use Safari or FireFox
    9) If trading files with Windows users is important Mac: Office is your best bet. If not, iWork, Mac:Office, or LibreOffice are all good possibilities.
    10) you can only buy Mt Lion via the App Store.

  • Two questions about Risk Management 2.0

    hi experts,
    Please find below two questions about Risk Management:
    -In SPRO, Risk Management>Create top node: after completing information and executing I have this error:
    Error in the ABAP Application Program
    The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
    because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "/ORM/SAPLORM_API_SERVICES " in
    include "/ORM/LORM_API_SERVICESU10 " in
    line 97:
    "Bei PERFORM bzw. CALL FUNCTION "GET_ORGUNIT_THRESHOLDS" ist der Aktual"
    "parameter "I_ORGUNIT_ID" zum Formalparameter "IV_ORGUNIT_ID" inkompati"
    "bel."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
    because it has
    come across a statement that unfortunately cannot be executed.
    Do you know where it could come from?
    -On the Portal>Risk Management
    when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Do we have to set up some customizing points before accessing these links?
    Thank you !
    Regards,
    Julien

    Hi Julien ,
    I have the same error what u described as :-
    -On the Portal>Risk Management
    when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Do we have to set up some customizing points before accessing these links?    "
    Are you able to solve this. Please let me know how to resolve this???
    Thanks
    Regards,
    Atul

  • Questions about Prompts -

    Hi,
    I have two questions about Prompt.
    1) We have a dashboard with multiple tabs - We have noticed the Prompt Values copy from one tab to another. User doesn't want this to happen. Every tab should have there own default. Is it possible that previous tab prompt value should not copy to another tab prompt.
    2) Is there a possible to have a prompt with Multi Select and Enterable field.
    Thanks,
    Poojak

    hi,
    Please see the answers below
    1)You can set the dashboard prompt scope to 'Page'.In this way it will affect reports present only on that page
    2)you can make a dashboard prompt 'Multiselect'.By default it will be drop down.If you go to your prompt there are options for these configuration.
    Thanks
    Sandeep

  • Legality questions about Home Sharing

    I have some legality questions about Apple's Home Sharing technology.
    As I understand it, you can share (that is, copy it from one computer to another) your music, movies, applications and other iTunes-managed files amongst five computers. The only 'trick' is that each computer must have an iTunes Store account and must be logged in in order for it to work.
    My question concerns the copying aspect and the legality of it. For content that was purchased through the iTunes Store I can see how Home Sharing can provide a limitation on content sharing, since all of the machines would need to be connected to Apple's servers in order for the validation process to happen. But what about content that was added to iTunes through other means, e.g., ripping my own CDs or converting my DVDs? These items can still be copied via Home Sharing and as there's no DRM on them there's no way they can be protected against "illegal" or "unauthorized" use.
    It was my understanding that if I gave a copy of a song to someone else, that's illegal. Apple's Home Sharing technology seems to facilitate this action. If I rip a CD or DVD into iTunes and someone copies it out, isn't that making an illegal copy? Can I be held liable for distribution of content?
    And how far does this extend? If I live in a house with four unrelated people, are they legally (?) allowed to copy music and media amongst each another? Is there a perceived or actual difference between using Home Sharing to copy a movie versus, say, using a USB flash drive? And what if one of them moves out? Am I legally obligated to go through that person's hard drive and remove content that they copied from me before they leave the building?
    Does Home Sharing somehow retroactively change the copyright application on a given CD or DVD? Most of my CDs and DVDs contain notices and warnings against distributing copies. Can these warnings now be ignored, or at least amended with "...unless you're using iTunes Home Sharing" at the ends of them?
    I am not trying to stir up a hornet's nest here. I'm only trying to better understand the legal issues surrounding Home Sharing and particularly how they relate to unprotected content. It seems very contradictory that the RIAA and MPAA would be fighting so hard against peer-to-peer services like BitTorrent and Gnutella while apparently allowing peer-to-peer services through iTunes Home Sharing.
    Furthermore, I also understand that the intention of this system was to allow families who are living together to have common access to all of the "household" music, but my issues aren't about this. I envision, for example, a college dorm building where there's several hundred people living together on the same network subnet, and all of them have Home Sharing enabled and everyone is copying thousands and thousands of songs to/from one another. Is this now legal?
    Any insights would be appreciated. Thanks.

    If I rip a CD or DVD into iTunes and someone copies it out, isn't that making an illegal copy?
    RIPping of commercial, encrypted DVDs (most of them) is illegal to begin with. Or rather, breaking the encryption on a DVD is illegal and in order to RIP the DVD, you must break the encryption. SO you have already "broken the law" by having a copy on your computer.
    Most of my CDs and DVDs contain notices and warnings against distributing copies.
    Most of your DVDs have a notice about even simply making a copy, not only distributing copies.
    Much of your post has been cussed and discussed by many, many people (lawyers, corporations, organizations, individuals, etc.) and no one has come (or likely ever will come) to a complete agreement.
    Generally, "sharing" in the same house hold amongst family members seems to be okay. Outside the same household/family is almost always not okay.
    I envision, for example, a college dorm building where there's several hundred people living together on the same network subnet, and all of them have Home Sharing enabled and everyone is copying thousands and thousands of songs to/from one another. Is this now legal?
    No.
    This is exactly what Napster was and why they were sued & shut down.
    I imagine Apple lawyers have done their homework as well as consulted with the labels to discuss these exact issues.
    And it's called "Home Sharing" to indicate that it is not "Dorm Sharing" or "Workplace Sharing", or even simply "Library Sharing"etc. even though it may be possible to use it in other places than the Home.
    Users on other computers need to know your iTunes ID and password to enable it Home Sharing. Likely this is how Apple got the lables to be okay with it.
    Are you gonna give (and get) dozens/hundreds/thousands/any other users your iTunesID & password?
    You can contact Apple Legal here -> http://www.apple.com/legal

  • Question about using multiple iPods on the same PC

    I've read the FAQs on this subject but I still have a couple of questions about multiple users with separate iPods using the same PC.
    I want to use my family's desktop (A new Gateway with Vista, if it matters) for my new iPod Classic, but my father already has an iTunes account on there for his iPod. I know I can create a new user account on the PC and move iTunes to a shared folder so that we can share music, but will this second account be able to purchase music from the iTunes store or am I going to have to switch between Windows User accounts to make purchases and then move new songs into my separate iTunes account via the shared folder? Will it be its own separate iTunes account (separate user name, separate credit card used, etc.) or will it just be a second library that's dependant on the first?
    I want to be able to have my own iTunes account, make my own purchases in it, and maybe occasionally share tv shows or something with my father.
    If this can't be done, would I be better off just creating new playlists for our two iPods from the same library, or creating a second library on my Father's account?
    Also, if I want to access things I've purchased from iTunes on this desktop in iTunes on my notebook, will I be able to?
    I hope that made sense.
    Sorry if these seem like silly questions. This will be my first iPod as I'm really excited about the 160gig and want to know if these things are possible.
    Thanks in advance for any help

    Hi, Wes.
    Congratulations on your new iPod Classic and Welcome to the Apple Discussions.
    For no particular reason, let's answer your last question first ...
    ... if I want to access things I've purchased from iTunes on this desktop in iTunes on my notebook, will I be able to?
    The iTunes Store operates on a one download per purchase policy so you will have to copy the purchases from one computer to the other and make sure that you authorize the laptop to play the songs.
    As to your first question ...
    ... will this second account be able to purchase music from the iTunes store or am I going to have to switch between Windows User accounts to make purchases ...
    Whatever XP User Account you are logged in to doesn't really matter. What's important is which Apple Account you sign in to ... yours or your Dad's or - if you had my Apple ID and password - The Mimico Kid's for that matter. You can sign in to any Apple Account on any XP User Account. Or any computer for that matter.
    Where the XP User Account comes into play is that it will determine where on your computer the purchases are downloaded. Files will be sent to the iTunes Music folder as specified in the iTunes Edit menu > Preferences > Advanced tab > General sub-tab. Default settings will have a different location for each User Account - C:\Documents and Settings\ user name \My Documents\My Music\iTunes - but if you've read this article in the Apple Knowledge Base, you will know you can change the location of the iTunes Music folder in each XP Account to a common location such as C:\Documents and Settings\All Users\Documents\My Music\iTunes.
    Post back if all this hasn't been as clear as mud and you need anything clarified.

Maybe you are looking for