Any issues in changing the name of the podcast?

Hi,
Our weekly science radio show/podcast, Are We Alone, is going to change names in mid-July.  We have concerns about whether this will disrupt downloads for people who are subscribed to the current show (eg, if they will need to resubscribe to the show again after the change), if there is a way to direct people from the old name to the new (if they heard about the show but don't know the new name), and how to put a "heads-up" notice on our current space in the iTunes Store.  I suspect for that, we just need to edit our current description field in the RSS xml, but I don't do that part of the process.
Any help or experience in doing a switch like this would be very helpful to us.
Thanks,
Barbara

The iTunes Store identifies the podcast by its feed URL and the number which it allocates to the podcast when it's accepted. If you change the title all that will happen is that the title will change - except that some podcast creation programs (iWeb for example) derive the feed URL from the title, so if you change the title it changes the URL of the feed and breaks the connection with iTunes. Bar that, you shouldn't have any problems.

Similar Messages

  • Are there any issues with changing IP address of an ACS v5.3 system after initial setup?

    I am migrating from ACS v4.2.1 to v5.3.  I want the final v5.3 system to assume the IP address of the original 4.2 machine so I don't have to change any configs on the network devices.
    Are there any issues with changing the v5.3 system IP address AFTER the initial setup?

    I tried it without a problem. I changed the ip address of the WLC many times.
    You have to make sure though that:
    1-) You change the switchport accordingly to the appropriate vlan if the new ip belongs to a subnet of a different vlan.
    2-) Make sure that all AAA clients configured to use the new IP address of the ACS servers.
    Here is the procedure how to change the ip of the interface (as per cisco doc):
    http://goo.gl/0BYqVT
    I changed also by normal ip address command and it works. but of course the server must be standalone before doing that step (i.e. no secondary ACSs registered to it and it is not registered to other ACSs in a distributoin).
    HTH
    Amjad

  • Any option to change the technical name of the info sources?

    Hi,
    Is there any option to change the technical name of the infor sources?

    Hi,
    You cannot change the technical name of infosource. You can go for Save as option and save it with different techincal name as required.
    Regards
    Akhan

  • Is there any function to change the width of froms'graphic ?

    Hi All,
    Is there any function to change the width of froms'graphic ?
    May be like set***property.
    Thanks,
    ke xiong

    Hi;
    For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Application Development in PL/SQL » Forms which you can get more quick response
    Regard
    Helios

  • Any way to change the order??

    I created a slide show with the 5.0 theme Portfolio, and in the midst of creating this the original page with the title and the portfolio on it only shows up after the slide show when I play it. Ive tried to just drag and drop it in front of the slide show but it wont work. Is there anything I can do other then start all over again?

    Is there any way to change the order of the items in the Files Inspector?
    Yes, but it must be done on a site-by-site basis.
    In the Site Definition dialog box, select File View Columns. You can control the position and display of columns there. The only one that can't be changed is Name.

  • HT4528 Is there any way to change the contact email?

    Is there any way to change the contact email? I had deleted my contact email without even a thought about my Apple ID. Any suggestions?
    <Re-Titled By Host>

    Without being able to login with the Apple ID credentials, it is not possible to change the recovery email address.  This is called security and prevents others from forcibly changing your Apple ID password and taking over the account.
    Options are either remember the security answers or fix access issues with the recovery email account.

  • Is there any way to change the label of my VO attributes

    hi ,
    Is there any way to change the label of my VO attributes so that it will have more logical presentation
    Thanks
    Musahib

    Hello Alex,
    I 've just checked my webbeans and the COLUMN_NAME_LABEL property is not use by the EditCurrentRecord, FindForm and RowsetBrowser webbeans.
    I had the following line to my custom EditCurrentRecord, FindForm and RowSetBrowser.
    So I can set Column display name ones for each webbeans.
    It's better than do it with different methods for each webbeans!!!!
    if((String)qView.getProperty(attrs[attrNo].getColumnName() + "_LABEL") != null)
    rField.setPromptText((String)qView.getProperty(attrs[attrNo].getColumnName() + "_LABEL"));
    In the ViewCurrentRecord something was done but with errors. Oracle Developers used getName() method instead of getColumnName()!!! So I rewrite it.
    if((String)qView.getProperty(attrs[attrNo].getName() + "_LABEL") != null)
    sHeader = (String)qView.getProperty(attrs[attrNo].getName() + "_LABEL");
    Hope this will help!
    Email if you need more.
    [email protected]
    Jean-Nokl

  • Is there any way to change the default AWR thresholds?

    Hi Gurus,
    Is there any way to change the default thresholds or attributes of AWR reports for a database?
    I have a requirement to change threshold for the SQL statements reported based on sharable memory.
    *"SQL ordered by Sharable Memory"*
    By defaults it reports statements only above 1Mb (I think it is in Bytes). So I can find only one statement being reported in this category or some times even nil.
    *"Only Statements with Sharable Memory greater than 1048576 are displayed"*
    It would be great help for me if you guys can help me out as we have issues related to memory often.
    Thanks and regards
    Satish

    U can do it using DBMS_WORKLOAD_REPOSITORY.MODIFY_SNAPSHOT_SETTINGS pararmeter
    DBMS_WORKLOAD_REPOSITORY.MODIFY_SNAPSHOT_SETTINGS(
    retention IN NUMBER DEFAULT NULL,
    interval IN NUMBER DEFAULT NULL,
    topnsql IN VARCHAR2,
    dbid IN NUMBER DEFAULT NULL);

  • Is there any way to change the PR in WO ?

    Dears, as per the example:
    The subject CRO was created for a value of 100 based on PR for the same value.
    This CRO was modified to 30 as contractor could not complete the job without modifying the PR and amount was paid.
    The balance amount (70) is still hanging in the system which is preventing us to issue another CRO to pay the other contractor.
    Is there any way to change the PR in WO so that this amount can be released?
    THANKS
    Paulo CH

    HI Paulo,
    When you created CRO at first place you had given the Gross Price as 100 in external data tab of your operation.
    This is open field which you can change to the actual price what ever you need and same will be reflected in your PR through Work flow.
    Regards,
    SS

  • Any way to change the order of the items in the Files Inspector? DW CS4

    Hi,
    I'm using Dreamweaver CS4 with my menus split virtically.
    Is there any way to change the order of the items in the Files Inspector?
    Specifially I'd like to have them in this order:
    | Local/Remote Files | Modified | Size | Type |
    The reason being that next to the 'Local Files' the 'Modified' column is most impotant for putting updated files/images, and in split vertical mode I have to scroll right to see the 'Modified' column.
    Is this a feature request?
    Rich

    Is there any way to change the order of the items in the Files Inspector?
    Yes, but it must be done on a site-by-site basis.
    In the Site Definition dialog box, select File View Columns. You can control the position and display of columns there. The only one that can't be changed is Name.

  • Is there any way to change the default font for outgoing text-messages, in "Messages"? (OSX 10.10)

    Is there any way to change the default font for outgoing text-messages, in "Messages"?
    I can change it for one conversation, but then it resets to the default, tiny font.
    The preferences menu only lets me change the conversation font.
    (OSX 10.10)

    Hi,
    As you may remember there used to be a Messages pane to the Preferences where the Font and colour of the Balloons or background and the Font text colour could be changed.
    And there was a Format Menu for character, word and Sentence changes in the current IM or iMessage.
    Those have gone in Yosemite's version of Messages (Despite it retaining the designation of Messages 8 the same as Mavericks' version).
    All that can be done now is set the size of the font and this has been moved to the General Section of the Preferences.
    The Yosemite version has also been fixed to using the Balloons style of send and receiving any type of messages as well.
    Changing the Font would involved editing the Balloon.transcript file.
    10:34 pm      Saturday; December 13, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • I just installed Photoshop and want to use it as the external editor.  I also have PS Elements on the computer and the only external editor I can get iPhoto to recognize is PSE.  Any help in changing the external editor to PS would be appreciated!

    I just installed Photoshop and want to use it as the external editor in iPhoto.  I also have PS Elements on the computer and the only external editor I can get iPhoto to recognize is PSE.  Any help in changing the external editor to PS would be appreciated!

    Welcome. I am using Photoshop CS5 and this works fine for me. Possibly Adobe has changed this in CS6. Hopefully, LarryHN will have further suggestions. Best.

  • Is there any way to change the security on multiple pdfs without having to open each pdf in acrobat ?

    Hi all
    Is there any way to change the security on multiple pdfs without having to open each pdf in acrobat ?

    Hi Gilad
    Thanks for the reply
    I'm not sure how to create an action I have Acrobat Pro 8.
    My company would love if I could make it as a batch file or some exe so that each file doesn't have to be opened in Acrobat

  • Is there any function to change the width of forms'graphic ?

    Hi All,
    Is there any function to change the width of forms'graphic ?
    May be like set***property.
    Thanks,
    ke xiong

    No. Graphics cannot be handled at runtime.
    Francois

  • Is there any program to change the color of requests

    Hi,
    I want to know is there any program to change the traffic color of requests.
    It is showing wait time until 'next months' date'.
    The option to change time out is greyed out in the Infopackage schedueler.
    Please sugegst anything.

    In RSMO Settings -> incorrect waiting time for request -> Change the time
    Regards,
    B

Maybe you are looking for

  • Setup Wizard does not exist on my 8700v... where is it hidden?!

    I have bought a second hand BB, previously on vodafone, currently on O2.  The getting started guide assumes I can find the setup wizard instantly.  Not only does it not appear automatically it is not in settings or any other place I have looked.  The

  • Ipod nano blue screen of death

    Hi, I'm having real problems with my ipods/itunes, running Windows Vista. I have an ipod classic and a nano and the problem is slightly different for each.  On the nano, halfway through sync, itunes crashes and I get BSOD. On the classic, I can sync

  • Photoshop Elements won't install on Windows 8

    First & foremost, I'm incredibly irritated that my Photoshop Elements 6 won't install on my new Windows 8 laptop. (I did the right thing: uninstalled from the old laptop before wiping the drive to get it ready for resale.)  And now, instead of gettin

  • Cursor for loop problem

    Hi to all! I have this sample data: CREATE TABLE person(id NUMBER PRIMARY KEY,                     first_name VARCHAR2(30),                     father_id NUMBER REFERENCES person(id),                     mother_id NUMBER REFERENCES person(id)); INSER

  • IMAP migration HostGator to Exchange online

    The email migration tutorial provided by Microsoft provides detailed instructions for using a mail administrator account in the CSV upload file to avoid having to reset user passwords during an email migration, however it does not work when migrating