Any keyboard touch makes system crash

Hello,
As soon as I hit any key of the keybord the system crash!
I can only use the guest session without any keybord problem.
Please help...
Retina 15 mid 2012 working

Try starting in Safe Mode and see if the problem still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)
If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+).

Similar Messages

Mc inside of urxvt makes system crash

have tried for like 10 times now. Whenever i start mc inside of a urxvt terminal my system crashes. Not even SysRQ is responding.
Fun thing: if i start it inside of screen it works. It also works just fine in xterm.
Any idea what might cause this?

Good grief. I've never used urxvt at all, but my best guess is a graphics problem. Maybe try disabling compositing if you have it turned on, and temporarily switch to the VESA video driver if this is appropriate? Or maybe urxvt has some display options that would help.

Newly installed Lightroom 4.1 64bit makes system crash when I try to run it.

How do I prevent Lightroom from causing my system to crash?

Moving this discussion to the Photoshop Lightroom forum.
PhilipWeiner do you receive a specific error message? Which operating system are you using? Have you tried installing the Photoshop Lightroom 4.4 update?

Ipod Touch makes windows crash~help please

Hey,
I am having some serious trouble with my iTouch. Everytime I connect the ipod to the computer with the USB, my screen immediately turns blue and says things like, "windows has encountered and error and must be shut down" and "STOP:0X0000007E". The last time it happened, I switched USB cords, and it worked. This time none of my 4 USB cords could help.
Please help. I just want to charge/sync my ipod touch.

Hi,
Does your PC have software for a Logitech QuickCam/Webcam, Lexmark scanners, or a built-in media card reader?
If it does try uninstalling the software from Control Panel, then testing again, as described here: http://support.apple.com/kb/TS1502
If the issue is no longer present, download updated driver software from the maker of the accessory.
-Jason

System crashes overnight

I have a mid 2009 iMac running OS X 10.10.3.   The behavior I will describe predates this OS, though, and goes back to OS X 10.9 at least.
The system is in my office. The system regularly crashes when left inactive overnight. It is set not to sleep, but to start the screen saver and to require authentication to get out of the screen saver. When I return, I can enter my password, but then the system becomes unresponsive. Alternatively, if I try to reach it by ssh or screen sharing, it is unresponsive.    I have to restart by powering down and powering up again.   I do not any message about a system crash, and submitting a report to apple.
Where can I find the relevant diagnostics to trace this problem?

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.
When you post the log extract or the crash report, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

System crashes when i use any input field after installing Maverick

Hello all.
I have a 2010 macbook air, and have just installed Maverick OS.
Now every time i go to any input field to type in a web address or apple id, the system crashes
and re-boots. Tried to alter keyboard properties nothing works.
I presume i will have to do a factory re-set, because i can not load any updates because I am asked
for apple ID, which i cant enter because computer crashes... Oh right i mentioned that already ;)
Help advice welcome!
Rgds from frustrated in Sweden!!!!

There was an issue similar to this that was resolved with DAQmx 9.3 update. If you haven't done so already, update the driver to 9.3 and try again. If not, try opening an example (like, say, Hardware I/O->DAQmx->Analog Meas->Voltage->Cont Acq&Graph Voltage-Int Clk-Analog Start.vi), and try running that standard example. If the example works and you still have difficulty with your application, could you post information about your project and what navigational steps you take to make the error occur? Try also opening the VI inside and outside of a project (this would diagnose a symptom of the issue resolved by DAQmx 9.3).
- Regards,
Beutlich

Non-Apple Keyboard: any way to control system audio volume?

I have a non-Apple Keyboard on my new Mini Lion 7.2.1
Is there any way to control system audio volume via the keyboard ?

Well. I can do this. But just because, on my Apple keyboard, there are the keys that do the job. There's a key to mute, and the keys to adjust low and high the sound. But keyboard shortcuts, I don't think exist. The aren't in keyboard shortcut in Keyboard panel, within System Preferences. The bottom line is that isn't a menu item in Finder for lower sound and higher sound. The only option would be an AppleScript that you save as an applet within Scripts menu (activated in Finder via Script Editor) and you invoke with a shortcut... Well, you can do it, if you open the script Set Output Volume in UI Elements Script folder within Scripts folder. Try it out!

I have a problem with Apple store when installing large application: The system crashes. Any suggestion?

I have a problem with Apple store when installing large application (example xCode): The system crashes.
It begun with 10.8 usualy with few tries it work but with 4.6 no succes.
Any suggestion?

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Is there any way to make my iPod Touch 4G to run faster? When I bought it, it was turbocharged! But now it seems to get a bit slower... Thanks in advance for any help

Is there any way to make my iPod Touch 4G to run faster? When I bought it, it was turbocharged! But now it seems to get a bit slower... Thanks in advance for any help

Periodically delete all apps from the recently-used bar (double clickHome button) and power off and then back on the iPod. With iOS 5, the iPod uses more memory (do not confuse with storage) and periodically you have to reclaim memory for use.

System crash when trying to connect IPod touch (blue screen)

Hello all!
All of a sudden, my computer running on Windows XP doesn't recognize my iPod touch anymore. Changing the USB-Port and re-installing iTunes did not help. The actualization of the driver resulted in the system to recognize the iPod for a couple of seconds, but then the system crashed and a blue screen appeared, which made it necessary to restart the system. I had the same thing four times today now and have absoultely no idea what else I could do. Can anyone help?
Thank you in advance!
Message was edited by: globi_lu

I too just had my itouch completely crash. I was attempting to sync and a pop up asked about updating my itouch. I agreed. Only to get the frozen apple screen with the download bar. Now I can't even reset my itouch or get my computer to recognize my itouch. PLEASE HELP!!

I just had to reformat my pc after a massive system crash and luckly my ipod toch had all my music and vids my home pc had from my itunes account is there any way to put my stuff bac on my new system

i had to reformat my PC after a massive system crash and luckly all my itunes songs and vids were on my itouch is there anyway to restore my info one my newly wiped clean pc

If you backed up the iPod before restoring it then restore from that backup. See the restore topic of:
iOS: How to back up
Also, if yoo have that backup you can extract the photos by:
Recover iPhone, iPad or iPod photos from backups with Picturescue
If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer

HELP: iPhone 6 Keyboard/Touch Screen Not Working

Hello.
I recently acquired to an iPhone 6, which has been working properly for the last two weeks. Today, my keyboard/touch screen stopped working properly. When I am typing in iMessage, or trying to compose an email, enter a URL, or anything else that requires my touch keyboard, my "123" button that switches to numbers, punctuation, and special characters does not open. I updated my software to iOS 8.3., which switched to a new and "improved" emoji keyboard, but I did this after my keyboard had already become unresponsive. If I click on the emjoi keyboard icon to switch over, the "ABC" button to swtich back to QWERTY is unresponsive. This is REALLY frustrating! The phone is two weeks old, and I cannot use to for a huge chunk of functionality.
It's not a dead spot on the touch screen. When I am not trying to access the keyboard, that little bottom left corner works fine to open/use my Phone app.
I really don't want to reset my phone. Any other ideas?
I made a Genius Bar appointment for next Wednesday 4/15, but that seems like an eternity from now.
Please help!

To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the Touch Screen . If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support

[VIA] Via K7-266 Pro2 - System crashes if use more than 512 MB of memory

Cannot use more than 512 MB of memory or system crashes. After running without a problem for over 2 years with 1 GB of memory installed, system started intermittent crashing, generally after 5 to 30 minutes of use. I worked with the system manufacturer's tech support and they determined that it must be a motherboard problem. I am hoping to find another fix rather than replacing motherboard. System details:
MB: Via K7-266 Pro2 (MS 6380)
OS: MS Windows XP Update 1
Bios: V3.6
I've used Norton Systemworks and Norton Anti-Virus to keep system clean, and SpyBot and Adaware to clean adware
During troubleshooting, we found that it will run with 512 MB of memory without problems, but not with the 1 GB I had installed. My memory was 2 x 256 MB installed with the machine and 512 MB I purchased from Crucial and installed. Computer ran over 2 years with all memory installed without a problem. After the problem started and during troubleshooting, we found that any combination of 512 MB worked fine (either the 2 x 256 MB or the one 500MB chip), apparently in any arrangement of slots. But as soon as I went to higher memory, I was subject intermittent crashes.
Could not ID the source of the crash. It sometimes happened when I was working with a single program open (various programs from IE to Excel to playing at GameSpy), had multiple programs open in background, or even when computer was sitting idle with only the startup programs active.
During troubleshooting we also did a complete re-install of Windows XP, updated the bios to V3.6, and checked bios settings, but the problems persists.
What else could be the problem?

I am beginning to suspect a PSU problem. I neglected to mention in my first post that when the system crashes, it does not freeze but has intermittent reboots.
I ran the memtest86+ test first on the two old sticks of memory then on just the one new 512 MB stick; both passed the test. I also used the Prime95 stress test on both sets, and both ran without incident.
I used PC Alert to report CPU and case temperatures during the stress test. The results maxed at 54 and 41 degrees respectively during the first stress test and 46 amd 39 degrees during the second test (I think part of the difference was due to a lower ambient, room temperature during the second test.) The voltages reported during both tests were similar and were: Vcore1: 1.71v; Vcore2: 1.26v; +5v: 4.76v; 3.3v: 3.31v; +12v: 11.60v; and -12v: 12.60v. I am not sure if that information is meaningful, PCAlert showed all measurements as within the required range.
I periodically have cleaned the dust out of my computer, so I don't think that is the problem.
I used 2 power calculators with major differences in the reported status of the system. The test from pcpowercooling reported minimum and maximum requirements for my system (with the full 1 GB of memory installed) of 300w and 510w. The alternate I found at jscustompcs (from a recent article about power supplies at Extreme Tech) reported a minimuum of 256w (no maximum is calculated with their tool. The two tools had significant differences for memory, CPU, and PCI cards. Off particular relevance to my problem was the difference in memory requirements; Pcpowercooling calculated memory requirements at 8w per 128MGB while jcustompcs used 12.5 per stick, resulting in different totals of 64w vs. 21w. Which is right?
One item that makes me think it is not the PSU, however, is that the problem would occur with the 1 GB of memory while the system was idle, thus I was not using any of the hardware devices. However, I never experienced the problem while using a device (e.g. DVD, CDRW, or tape drive) - either with 500MB or 1GB of memory.
My power unit is a Power Man #FSP 300-60BTV with 300w output, including +3.3v: 28amps; +5v: 30.0 amps; +12v: 15 amps; +5vsb: 20amps; -5v: 0.3amps; -12v: 0.8amps. It also notes max output of +3.3v and +5v of 200amps.
My system also includes a Leadtek nVidia Geforce 3 Ti400 graphics card, DVD, CDRW, HP 14 GB tape drive, 1 case fan, and 4 PCI cards (modem, network, USB2.0, and Audigy 1). The USB card is connected only to a bus in my Dell monitor and I have not used other USB devices.
Any thoughts or suggestions? Do I need to replace the PSU?

I would like to uninstall or otherwise safely remove any applications that make my MB Pro run slowly.

I would like to uninstall or otherwise safely remove any applications that make my MB Pro run slowly. I will have to keep a few apps such as CrossWeb and Veraport due to having to use secure banking and government websites in Korea. I also need the LogMeIn app to access a server in the USA, but I realise that some people recommend getting rid of it.
I tried but apparently have been unsuccessful in removing a McAfee VirusScan application completely. I can still see some files in the HD Library. Any ideas here on how to safely uninstall/remove?
Also any suggestions on how to get rid of my incompatible virtualbox? I think it's 4.0.4.
Also, if you see anything else I should uninstall/remove from the EtreCheck below, by all means please make suggestions.
Thanks so much for your help, suggestions, and advice!
Hardware Information:
    MacBook Pro (15-inch, Mid 2010)
    MacBook Pro - model: MacBookPro6,2
    1 2.53 GHz Intel Core i5 CPU: 2 cores
    4 GB RAM
Video Information:
    Intel HD Graphics - VRAM: 288 MB
    NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software:
    OS X 10.9.2 (13C1021) - Uptime: 0 days 1:55:49
Disk Information:
    ST9500325ASG disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted>: 209.7 MB
        Macintosh HD (disk0s2) / [Startup]: 499.25 GB (295.55 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
    MATSHITADVD-R   UJ-898
USB Information:
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. Built-in iSight
    Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Gatekeeper:
    Anywhere
Kernel Extensions:
    [not loaded]    com.cisco.cscotun (1.0) Support
    [kext loaded]    com.logmein.hamachi (1.0) Support
    [kext loaded]    org.virtualbox.kext.VBoxDrv (4.0.4) Support
    [not loaded]    org.virtualbox.kext.VBoxNetAdp (4.0.4) Support
    [not loaded]    org.virtualbox.kext.VBoxNetFlt (4.0.4) Support
    [kext loaded]    org.virtualbox.kext.VBoxUSB (4.0.4) Support
Startup Items:
    KeyAccess: Path: /Library/StartupItems/KeyAccess
    VirtualBox: Path: /Library/StartupItems/VirtualBox
Launch Daemons:
    [failed]    com.adobe.fpsaud.plist Support
    [loaded]    com.adobe.SwitchBoard.plist Support
    [running]    com.cisco.anyconnect.vpnagentd.plist Support
    [loaded]    com.google.keystone.daemon.plist Support
    [running]    com.logmein.hamachi.plist Support
    [running]    com.sassafras.KeyAccess.plist Support
    [loaded]    com.tunnelbear.mac.tbeard.plist Support
Launch Agents:
    [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.cisco.anyconnect.gui.plist Support
    [loaded]    com.google.keystone.agent.plist Support
    [running]    com.logmein.hamachimb.plist Support
    [loaded]    com.sassafras.KeyAccess.plist Support
User Launch Agents:
    [loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [running]    com.spotify.webhelper.plist Support
    [not loaded]    org.virtualbox.vboxwebsrv.plist Support
User Login Items:
    GrowlHelperApp
    GrowlHelperApp
    iTunesHelper
    SuperDrive Update 2.1
    Google Drive
    Dropbox
    DaumLiveAgent
    KeyAccess
Internet Plug-ins:
    npCrossWebPlugin: Version: 1.0 - SDK 10.5 Support
    o1dbrowserplugin: Version: 5.3.1.18536 Support
    Google Earth Web Plug-in: Version: 6.1 Support
    Default Browser: Version: 537 - SDK 10.9
    Flip4Mac WMV Plugin: Version: 2.4.1.4 Support
    OfficeLiveBrowserPlugin: Version: 12.3.6 Support
    RealPlayer Plugin: Version: (null) Support
    AdobePDFViewerNPAPI: Version: 10.1.10 Support
    FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
    DivXBrowserPlugin: Version: 2.0 Support
    Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
    Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
    iPhotoPhotocast: Version: 7.0
    googletalkbrowserplugin: Version: 5.3.1.18536 Support
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewer: Version: 10.1.10 Support
    Veraport: Version: 1.1.0.2 - SDK 10.7 Support
    JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
    DivX Support
    Flash Player Support
    Flip4Mac WMV Support
    Growl Support
    KeyAccess Support
    Symantec\nQuickMenu Support
Time Machine:
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        Macintosh HD: Disk size: 464.96 GB Disk used: 189.71 GB
    Destinations:
        Data [Network] (Last used)
        Total size: 2
        Total number of backups: 30
        Oldest backup: 2012-08-12 07:49:57 +0000
        Last backup: 2014-05-05 04:48:48 +0000
        Size of backup disk: Excellent
            Backup size 2 > (Disk size 464.96 GB X 3)
    Time Machine details may not be accurate.
    All volumes being backed up may not be listed.
Top Processes by CPU:
         3%    WindowServer
         0%    fontd
         0%    PluginProcess
         0%    Google Drive
         0%    com.apple.WebKit.Networking
Top Processes by Memory:
    188 MB    com.apple.IconServicesAgent
    143 MB    Finder
    143 MB    mds_stores
    102 MB    Safari
    98 MB    WindowServer
Virtual Memory Information:
    53 MB    Free RAM
    1.55 GB    Active RAM
    1.50 GB    Inactive RAM
    787 MB    Wired RAM
    537 MB    Page-ins
    316 KB    Page-outs

You have so much junk, and I doubt that you know how to uninstall it.
It's up to you what you do, I know what I would do (but then I wouldn't stuff my Mac with junk in the first place)
Good luck.

Stuttering video/audio and system crashes?

For the better part of this year, I've had a terrible time with video and audio stuttering on my MacBook (Sept. 2007; 2.16GHz, 4MB RAM). This was especially noticeable when watching streaming Netflix videos, and it didn't seem to matter if I was using Safari or Firefox. Clearing the browser cache has little to no impact.
The problem appears to have worsened since I upgraded to Snow Leopard about two months ago. (I'd previously been using OS 10.4.11; I now have 10.6.7). This same problem now impacting YouTube and QuickTime, even when I'm viewing files on my hard drive (approx. 27 GB free on a 120 GB drive), so I doubt that my internet connection is to blame. This happens whether I'm on WiFi or on an Ethernet connection -- also, my Ethernet randomly decides to stop working, but that's (probably) a separate issue.
(Also since my OS upgrade, I'm suddenly having battery issues as well.)
The problem is sometimes so bad that the entire system crashes, and I'm forced to do a cold/hard reboot of my MacBook. This has happened twice within the past 24 hours. Mostly, I can watch a few seconds or sometimes several minutes of video before the video and audio start sticking and stuttering again -- so pretty much any video capability is nearly worthless to me at this point.
Here's the Panic Report from my latest system crash this morning... I don't know how to read Panic Reports, so I'm hoping someone might spot something that I can fix to address this issue?
Interval Since Last Panic Report: 69709 sec
Panics Since Last Report:          1
Anonymous UUID:                    0FEDE34F-A36E-41ED-B143-B31AFF61812B
Wed Jun 8 09:59:42 2011
panic(cpu 0 caller 0x28f17d): "pmap_flush_tlbs() timeout: " "cpu(s) failing to respond to interrupts, pmap=0x5fd71d0 cpus_to_respond=0x2"@/SourceCache/xnu/xnu-1504.9.37/osfmk/i386/pmap.c:3561
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x420fbb28 : 0x21b510 (0x5d9514 0x420fbb5c 0x223978 0x0)
0x420fbb78 : 0x28f17d (0x597130 0x5fd71d0 0x2 0x73bd000)
0x420fbbe8 : 0x2939ff (0x5fd71d0 0x1760a000 0x0 0x41f42221)
0x420fbd78 : 0x254f7c (0x5fd71d0 0x1760a000 0x0 0xbddb8)
0x420fbde8 : 0x257f97 (0x416911c 0x5fd71d0 0x1760a000 0x0)
0x420fbf38 : 0x2aa430 (0x78dc148 0x1760a000 0x0 0x3)
0x420fbfc8 : 0x2a081a (0x762d0a0 0x0 0x10 0x5341064)
BSD process name corresponding to current thread: plugin-container
Mac OS version:
10J869
Kernel version:
Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
System model name: MacBook2,1 (Mac-F4208CAA)
System uptime in nanoseconds: 35391390659717
unloaded kexts:
com.apple.driver.CSRHIDTransitionDriver          2.4.0f1 (addr 0x42077000, size 0x12288) - last unloaded 24672258926767
loaded kexts:
com.google.driver.Gild          1.0.0 - last loaded 24609888691244
com.apple.driver.AudioAUUC          1.54
com.apple.driver.AppleUpstreamUserClient          3.5.4
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleIntelGMA950          6.2.6
com.apple.driver.AppleMCCSControl          1.0.17
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AppleHDA          1.9.9f12
com.apple.driver.AppleIntelIntegratedFramebuffer          6.2.6
com.apple.driver.SMCMotionSensor          3.0.0d4
com.apple.iokit.AppleYukon2          3.2.1b1
com.apple.driver.AppleIntelMeromProfile          19
com.apple.driver.AirPort.Atheros21          424.14.5
com.apple.driver.ACPI_SMC_PlatformPlugin          4.5.0d5
com.apple.driver.AppleLPC          1.4.12
com.apple.driver.AppleBacklight          170.0.34
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AppleIRController          303.8
com.apple.driver.AppleUSBTrackpad          200.3.2
com.apple.driver.AppleUSBTCKeyEventDriver          200.3.2
com.apple.driver.AppleUSBTCKeyboard          200.3.2
com.apple.iokit.SCSITaskUserClient          2.6.5
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleFWOHCI          4.7.1
com.apple.BootCache          31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.iokit.IOAHCIBlockStorage          1.6.3
com.apple.driver.AppleUSBHub          4.1.7
com.apple.driver.AppleAHCIPort          2.1.5
com.apple.driver.AppleUSBEHCI          4.1.8
com.apple.driver.AppleUSBUHCI          4.1.5
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleSmartBatteryManager          160.0.0
com.apple.driver.AppleACPIButtons          1.3.5
com.apple.driver.AppleSMBIOS          1.6
com.apple.driver.AppleACPIEC          1.3.5
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          105.13.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.11
com.apple.driver.AppleIntelCPUPowerManagement          105.13.0
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.0f1
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.driver.DspFuncLib          1.9.9f12
com.apple.iokit.IOAudioFamily          1.8.0fc1
com.apple.kext.OSvKernDSPLib          1.3
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.AppleProfileFamily          41
com.apple.driver.AppleHDAController          1.9.9f12
com.apple.iokit.IOHDAFamily          1.9.9f12
com.apple.iokit.IO80211Family          314.1.1
com.apple.iokit.IONetworkingFamily          1.10
com.apple.driver.AppleSMC          3.1.0d3
com.apple.driver.IOPlatformPluginFamily          4.5.0d5
com.apple.iokit.IONDRVSupport          2.2
com.apple.iokit.IOGraphicsFamily          2.2
com.apple.driver.CSRUSBBluetoothHCIController          2.4.0f1
com.apple.driver.AppleUSBBluetoothHCIController          2.4.0f1
com.apple.iokit.IOBluetoothFamily          2.4.0f1
com.apple.iokit.IOUSBHIDDriver          4.1.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.5
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6
com.apple.driver.AppleUSBMergeNub          4.1.8
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOATAPIProtocolTransport          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.5
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.driver.XsanFilter          402.1
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOUSBUserClient          4.1.5
com.apple.iokit.IOAHCIFamily          2.0.4
com.apple.iokit.IOUSBFamily          4.1.8
com.apple.iokit.IOHIDFamily          1.6.5
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.TMSafetyNet          6
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          289
com.apple.iokit.IOStorageFamily          1.6.2
com.apple.driver.AppleACPIPlatform          1.3.5
com.apple.iokit.IOPCIFamily          2.6
com.apple.iokit.IOACPIFamily          1.3.0
Model: MacBook2,1, BootROM MB21.00A5.B07, 2 processors, Intel Core 2 Duo, 2.16 GHz, 4 GB, SMC 1.17f0
Graphics: Intel GMA 950, GMA 950, Built-In, spdisplays_integrated_vram
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x87), Atheros 5416: 2.1.14.5
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHW2120BH, 111.79 GB
Parallel ATA Device: MATSHITADVD-R   UJ-857E
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x1d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x5d200000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x7d100000

Definitely not. I've got a 2007 MacBook, and even with the extended warranty that coverage expired a year ago.
If you're concnered about cost, you could always call and ask. In my experience, the people at the Genius Bar (and Apple Store in general) are happy to provide assistance free of charge. If you have to replace a part, system, etc. you'll certainly need to cover that, but they should talk to you about costs and get your consent before doing any work on your machine.

Any keyboard touch makes system crash

Similar Messages

Maybe you are looking for