Any Pointers on how to get object list values and component values in iw32

Hi,
I have a requirement where whenever a user enters a creates(iw31) or changes(iw32) an order then we have to validate the materials entered by the user before saving the order.We have en interface structure for the transaction 'CAUFVD'.Which gives us the values of functional location and equipment entered under the Reference object.But we need to validate all the object list functional locations and also Order components enetered by the user.Can any one tell me how to get the values of all these fields entered by the user?
And also I need to query Equipment Bill of Material.What does this equipment BOM refers to .Is it the equipments under Object list or something else.
Please Help.
Thanks

Hi Anu
There is a user exit that gets trigerred when you try to save a work order . The exit is 'EXIT_SAPLCOIH_009' . This exit has the structure CAUFVD_IMP which will give you all the order header values entered by the user.
User exit 'EXIT_SAPLCOBT_001' will give all the values entered by the user including order components. Also check the package CO amd see if there is any other function group suiting your requirement.
hope this helps you.
cheers
shivika

Similar Messages

I recently used the migration assistant and now my music has not transferred and it wont play, any ideas on how to get all my music and films to actually work?

Hello,
I recently used the migration assistant on my old macbook air to transfer my data to my new macbook pro, yet it seems that my music and Films have not fully transferred over. i have used macs for a while now and haven't had any problems before, yet now itunes has the names of my music and films yet it can't locate the original file. any ideas on how to get this fixed? i don't want to buy all my music and films again.
Help?!
Thanks

Did the original files actually transfer? They would be in Music>iTunes>iTunes Music. You may just need to rebuild the library if the files are in that folder.
Clinton

How to Get the min,max and original values in a single query

Hi,
I have a task where in i have to the min , max and the original values of a data set .
I have the data like below and i want the target as well as mentioned below
SOURCE
DATASOURCE
INTEGRATIONID
SLOT_DATE
SLOT1
SLOT2
SLOT3
SLOT4
SLOT5
SLOT6
SLOT7
SLOT8
SLOT9
SLOT10
1
101
201111
100
100
200
100
100
100
300
300
300
300
1
101
2011112
200
200
200
200
100
100
100
100
200
300
TARGET
DATASOURCE
INTEGRATIONID
SLOT_DATE
SLOT_VALUE
SLOT MIN
SLOT_MAX
SLOT NUMBER
1
101
201111
100
1
2
SLOT1
1
101
201111
100
1
2
SLOT2
1
101
201111
200
3
3
SLOT3
1
101
201111
100
4
6
SLOT4
1
101
201111
100
4
6
SLOT5
1
101
201111
100
4
6
SLOT6
1
101
201111
300
7
10
SLOT7
1
101
201111
300
7
10
SLOT8
1
101
201111
300
7
10
SLOT9
1
101
201111
300
7
10
SLOT10
1
101
2011112
200
1
4
SLOT1
1
101
2011112
200
1
4
SLOT2
1
101
2011112
200
1
4
SLOT3
1
101
2011112
200
1
4
SLOT4
1
101
2011112
100
5
8
SLOT5
1
101
2011112
100
5
8
SLOT6
1
101
2011112
100
5
8
SLOT7
1
101
2011112
100
5
8
SLOT8
1
101
2011112
200
9
9
SLOT9
1
101
2011112
300
10
10
SLOT10
e
so basically i would first denormalize the data using the pivot column and then use min and max to get the slot_start and slot_end.
But then i
can get the min and max ... but not the orignal values as well.
Any thoughts would be appreciated.
Thanks

If you want to end up with one row per slot per datasource etc, and you want the min and max slots that have the same value as the current slot, then you probably need to be using analytic functions, like:
with t as
(SELECT 1 datasource,101    INTEGRATIONID, 201111     slotdate, 100    SLOT1, 100        SLOT2,    200    slot3, 100    slot4, 100    slot5, 100    slot6, 300    slot7, 300    slot8, 300    slot9, 300 slot10 FROM DUAL union all
SELECT 1,    101,    2011112,    200,    200,    200,    200,    100,    100,    100,    100,    200,    300 FROM DUAL),
UNPIVOTED AS
(SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,1 SLOT,SLOT1 SLOT_VALUE
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,2 SLOT,SLOT2
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,3 SLOT,SLOT3
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,4 SLOT,SLOT4
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,5 SLOT,SLOT5
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,6 SLOT,SLOT6
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,7 SLOT,SLOT7
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,8 SLOT,SLOT8
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,9 SLOT,SLOT9
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,10 SLOT,SLOT10
FROM T)
select DATASOURCE,INTEGRATIONID,SLOTDATE,slot,slot_value,min(slot) OVER (partition by datasource,integrationid,slotdate,rn) minslot,
    max(slot) OVER (partition by datasource,integrationid,slotdate,rn) maxslot
FROM
select DATASOURCE,INTEGRATIONID,SLOTDATE,max(rn) over (partition by datasource,integrationid,slotdate order by slot) rn,slot,slot_value
FROM
    (SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,slot,slot_value,
          case when row_number() over (partition by datasource,integrationid,slotdate order by slot) = 1 or
          lag(slot_value) over (partition by datasource,integrationid,slotdate order by slot) <> slot_value
              then row_number() over (partition by datasource,integrationid,slotdate order by slot)
              ELSE null
              END rn
    from unpivoted
order by DATASOURCE,INTEGRATIONID,SLOTDATE,slot

How to get back deleted photos and contacts???

First time to sync iphone 4 to computer and I have accidently deleted all my photos and contacts! All the photos from my computer are now in albums on my iphone. Any help in how to get back deleted photos and contacts would be greatly appreciated.
Thanks,
Sandra

Hi Allan,
Thanks for the reply. I restored from backup but now all photos from computer are gone, plus messages since yesterday etc.!

How to get a list of schemas that contain objects

Hello,
Kindly check on how to get a list of schema that contain objects.
Regards,
Tarman.

Here is the oracle version info and it run under HP-UX.
Oracle9i Enterprise Edition Release 9.2.0.5.0 - 64bit Production
With the Partitioning and Real Application Clusters options
JServer Release 9.2.0.5.0 - Production
I have problem when run the query,
SQL> select owner, count(object_name) from dba_objects where owner is not in ('S
YS','SYSTEM','SYSMAN');
select owner, count(object_name) from dba_objects where owner is not in ('SYS','
SYSTEM','SYSMAN')
ERROR at line 1:
ORA-00908: missing NULL keyword
Thanks.

Trying to convert Pages to Word doc, but keep getting this error message: TypeError: Object doesn't support property or method 'invalidate' JavaScript console contains more details. Any ideas on how to get past this?

Trying to convert Pages to Word doc, but keep getting this error message: TypeError: Object doesn't support property or method 'invalidate' JavaScript console contains more details. Any ideas on how to get past this?

Right. If you are using delegated privs and sudo, make sure that sudo is configured to pass on the PERL5LIB and ORACLE_HOME environment variables at least.

Any pointers on how ERP Sales order are searched in Agent Inbox

Hi,
I have a requirement where i need to trigger an activity/workflow in CRM for orders that are created through ERP Salesorder functionality. In the workflow list, we need to give the order description and provide an hyperlink to the order number. on selection of order number, it should display the ERP sales order. To achive this in workflow, i am trying to understand the as-is standard functionality which is available in Agent Inbox search on ERP sales order.This search is getting the ERP orders and on selecting the order it is opening the ERO sales order page. I tried debugging the method GET_MAINCATAEGORY available in the component iccmp_inbox and in the view Inboxsearch.But couldnt really able to crack the logic how it is retrieving the ERP sales order from inbox search. Any pointers on how this is achieved will be of great help.
Thanks,
Udaya

Hi Udaya,
Calling a Customer Specific R/3 Transaciton was quite easy in CRM 4.0 / 5.0 in the PC-UI Framework using Object Links. You can do that all by customizing and creating a custom method for a BOR Object in Transaction SWO1.
I think I've used CRM_ORDER_MAINTAIN to update the Document Flow. The subsequent activities where created by BAPI_ACTIVITYCRM_CREATEMULTI. I've wrapped all that standard functions in a RFC enabled function module.
It would be possible to provide also a link in the E-Mail to the Manager but the client is using a Citrix environment to provide access to the Portal. But Outlook runs locally. So we decided to use the standard Portal iView to display the Alerts. When you fill the Alert Container with the elements OBJKEY_GUID, OBJKEY_BOR_OBJECT_TYPE, OBJKEY_CRM_OBJECT_TYPE, OBJKEY_METHOD and OBJKEY_LOGICAL_SYSTEM using the Function Module SWC_ELEMENT_SET that provides a direct link to the specific document too.
Best regards
Gregor

I have an old ipod and want to know how to get everything off it and into my iTunes library. My old computer died and the original library was lost, so don't have any of the content saved anywhere else.

I have an old ipod (it's the very thin oblong one in purple, the one before the one that does video) and want to know how to get everything off it and into my iTunes library. My old computer died and the original library was lost, so don't have any of the content saved anywhere else. I now have an iPhone 5S and listen to music on that, so want to be able to listen to things from the old ipod too.
Can anyone help please?
Thanks very much
Jane

Apple normally does not get involved in handling lost objects like this. Since a real name is not installed it will be much more difficult.
You can try contacting Apple support at the US number, assume you are US going to BWI from the listing: http://support.apple.com/kb/HE57 and explain the situation and see if they offer any suggestions.

How to Get a list of pending deferred tasks

Hi all
there is a bunch of unfinished threads here asking how to get a list/report of deferred tasks that are associated with user objects and scheduled for future execution.
I need this list and I can't find out how to get it anyway.
I don't care if it's a SJSIM report, a database query or a SJSIM log mining exercise.
Does anyone know how to do this?
My org has just gone live with SJSIM and I want to report on the number of legacy resource accounts that have had deferred tasks created against them for future disabling/deletion (our consultants added this workflow based on rules with an email warning, a disabling deferred task set for 2 weeks from now and a deleting deferred task for 6 months after that). Hopefully I can say "look, 5,000 legacy accounts are going to be cleaned up!
Thanks in advance

You can do it with a custom workflow, something like this:
     <Activity>
        <Action id='0' class='com.waveset.session.WorkflowServices'>
          <Argument name='op' value='queryObjectNames'/>
          <Argument name='type' value='User'/>
          <Argument name='attributes'>
             <list>
                    <new class='com.waveset.object.AttributeCondition'>
                       <s>deferredTaskDate</s>
                       <s>isPresent</s>
                    </new>
              </list>
           </Argument>
        <Action id='1' process='Check User'>
          <Iterate for='currentUser' in='queryResult'/>
          <Argument name='accountId' value='$(currentUser)'/>
        </Action>
     </Activity>And:
       <WFProcess name='Check User'>
         <Variable name='accountId' input='true'/>
         <Activity id='0' name='start'>
           <Transition to='Check User'/>
         </Activity>
         <Activity id='1' name='Check User' hidden='true'>
           <Action id='1' name='Get User View' application='com.waveset.session.WorkflowServices'>
             <Argument name='op' value='getView'/>
             <Argument name='type' value='User'/>
             <Argument name='id' value='$(accountId)'/>
             <Argument name='authorized' value='true'/>
           </Action>
           <Transition to='Got One'>
               <notnull>
                       <ref>view.accounts[Lighthouse].properties.tasks[Legacy Cleanup].date<ref>
                </notnull>
             </Transition>
             <Transition to='end'/>
          </Activity>
          <Activity id='2 name='Got One'>
             <ActionResult name='users' type='message' overwrite='false'>
                <ref>accountId</ref>
              </ActionResult>
          </Action>
          <Transition to='end'/>
        </Activity>
     </WFProcess>This just gives a rough idea of how it can be done. It might be best to bring your consultants back in to implement this.
Edited by: PaulHilchey on Feb 25, 2009 10:35 AM

How to get the list of users who has access for list of tcodes.

How to get the list of users who has access for list of tcodes.

Go to transaction SUIM, this has a number of reports for users/authorisations
open the Where used>Autorization Values>In Users
and double click to execute
in authorisation object, enter S_TCODE
then press the "Enter Values" button
It will offer entry boxes to put the transaction code you are interesed in.
Then execute and the list of users with access to this transaciton code will be returned.

How to get a list of user who is shared with particular workbook

Hi everyone,
I have duplicated a workbook and made some changes on the new one. Now I'd like to share the new one with the same list of user as the old one.
The number of user is great, more than 500.
I would like to know any SQL that let me get a list of user who have been shared with the old one, such that I won't miss anyone of them.

Hi,
I would like to know any SQL that let me get a list of user who have been shared with the old one, such that I won't miss anyone of them.Refer to these documents.
Note: 293021.1 - How to Find Out the Sharing Information for Discoverer workbooks From the Database
Note: 375777.1 - How To See Which Discoverer Workbooks Are Owned And Shared By An Existing Or Dropped Database User
Thanks,
Hussein

HT201272 Hi guys...I have just got a new computer and want to get my library back up and running on it. However I seem to be missing some of my iTunes music purchases. Any ideas on how to get them back? They show up on my ipad but not my actual itunes acc

Hi guys...I have just got a new computer and want to get my library back up and running on it. However I seem to be missing some of my iTunes music purchases. Any ideas on how to get them back? They show up on my ipad but not my actual itunes account.

Hello there, Capricious13.
There are great pointers in the following Knowledge Base article. Depending on where you see the content and where you want to get it to, this should guide you to putting it in the right place:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

How to get the list of active devices in current wifi network?

Hi All,
I am going to a start a new Network based app. So please any one give me an idea on the below question.
How to get the list of active devices in current wifi network?

Nope I want the log-in user to retrieve its Group where he is belong. I have this following code
strUsername = Request.getParameter("username").toLowerCase().trim()+"@dev.test.com.ph";
strPassword = Request.getParameter("password").toLowerCase().trim();
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, INITCTX);
env.put(Context.PROVIDER_URL, MY_HOST);
env.put(Context.SECURITY_AUTHENTICATION, "simple");
env.put(Context.SECURITY_PRINCIPAL,strUsername);
env.put(Context.SECURITY_CREDENTIALS, strPassword);
// enable tracing
env.put("com.sun.naming.ldap.trace.ber", System.err);
// Create the initial context
DirContext initCtx = new InitialDirContext(env);
// Get the target context
DirContext targetCtx = (DirContext)initCtx.lookup("");
SearchControls constraints = new SearchControls();
constraints.setSearchScope(SearchControls.SUBTREE_SCOPE);
// Perform the search on the target context
NamingEnumeration enum = targetCtx.search("","(userPrincipalName="+strUsername+")",constraints);
javax.naming.directory.Attributes attrs;
NameClassPair item;
String[] attrIds = new String[]{"MemberOf"};
// For each answer found, get its "Groups" attribute
// If relative, resolve it relative to the target context
// If not relative, resolve it relative to the initial context
while (enum.hasMore()) {
item = (NameClassPair)enum.next();
Out.println(item);
attrs = targetCtx.getAttributes(item.getName(), attrIds);
Out.println(attrs + "<br>");
initCtx.close();
It returns all this string :
{memberof=memberOf: CN=CMCanadaRD,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=iMngrCanadaRW,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=Domain Users,CN=Users,DC=dev,DC=test,DC=com,DC=ph, CN=Backup Operators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph, CN=Administrators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph}
How can i retrieve the Group named CMCanadaRW and CMCanadaRD on the Attribute?
Thanks

How to get the list of Used Quotations & Non Used Quotations

Hi MM Gurus,
How to get the list of Used Quotations & Non Used Quotations.
i am not talking about Open quotation ,closed quotation..
if once i created PO through quotation it should be used quotation. i not created PO through quotation
it s should be Non used quotation. how to get this list through when we create PO through ME21N
document over view. is there any opetion in Dynamic selection or somthing ..???
Thanks in Advance..
Anthyodaya.

ok.

How to get the list of Quotations...???

Hi MM Gurus,
How to get the list of Used Quotations & Non Used Quotations.
i am not talking about Open quotation ,closed quotation..
if once i created PO through quotation it should be used quotation. i not created PO through quotation
it s should be Non used quotation. how to get this list through when we create PO through ME21N
document over view. is there any opetion in Dynamic selection or somthing ..???
Thanks in Advance..
Anthyodaya.

Hi Shailesh,
Thanks for the mail...
but the problem is different. ...i wanted a list of used quotations and not used quotations saparate list.
because we have same vendor for same material different price .
so when we create PO we should use Quotation only one time.
poen RFQ and closed RFQ is different .i means RFQ not at maintained in ME47. not at received the price from vendor or not at enterd the price. ... so that is different..
if the non used quotation will display in ME21N document overview it should be very usefull...
Thanks in advance.
Anthyodaya.

Any Pointers on how to get object list values and component values in iw32

Similar Messages

Maybe you are looking for