Any problem between mainstage 2.2.2 an yosemite?

Some have had problems with mainstage 2.2.2 and yosemite ?.
I'm afraid to update

I have made an ssd upgrade on my macbook pro and new install of yosemite,
MainStage 2 opens but I couldn't download the additional content.
MainStage 2 is 32 bit, and I think they updated some loops and instruments.

Similar Messages

Do any of you experience Im having with my ipad? I can't make a comment in Facebook for older posts and I can't open numerous comments from old posts of my friends. but everything works perfectly when I use laptop. is there problem between apple and FB?

do any of you experience Im having with my ipad? I can't make a comment in Facebook for older posts and I can't open numerous comments from old posts of my friends. but everything works perfectly when I use my laptop(non-apple). is there problem between apple and FB?

Facebook apparently has their site coded poorly for tablets with touch screens. Try using the Facebook app. It is not perfect either but it is better than view in a browser lately.

HT1296 I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?

I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?

It could be that the existing wire in your appartment is not clean enough to provision DSL only. When combined with the phone possibly it has a higher line voltage and worked before. Now that the line is to be provisioned without phone service it may be giving them trouble that did not show before they came out and ran the new line test. So a new jack dedecated for your DSL line may require a new wire be run to your appartment. Also the account for internet only used to require direct billing to a credit card or something else. This was a number of years ago. Most accounts are linked to a phone number, and without a voice number it adds to the confusion.
If you are getting the voice and everything turned on as before, then I am at a loss for words.

Wireless Communication problem between HP Photosmart C309g and Linksys E2500 router

Hello,
I used C309g connected to DLink Dl-624 router (wireless connection) and everything was working correctly. Now I changed the router to Linksys E2500 (dual band router) and I've got strange problem I cannot fix.
The printer connects to router, obtaint IP address and network report does not indicates any problem. Also HP Print & Scan Doctor does not report any problem.
But when I try to print from my laptop, the pint start and is quickly broken, and I've got the message that printer is diconnected. The printer stops. When I leave it for a coupl of minutes, the printing starts and after few lines stops again with the same message on the laptop.
When I return to DLink router, everything works correctly.
I tried with 4 different laptops, with different operating systems, and i've gor the same issue. But the laptops communicates well, the network does not break..
I enforced router to use IP reserved number for the printer, used the same IP range and number for my network and printer on Linksys and DLink, does not help. I've turn off firewall on the router - does not help. I've change the channel range for 2.4 GHz network to 20MHz only - does not help.
What would be the problem with it? Is there something related to dual-band? Any idea?

Well, I did not install the printer drivers from cd, I did it from the Hp webpage. Looking for the potential problems I reinstall the drivers and it did not helped. I also turn off the firewall router application and it also did not help.
I suspect I have the printer firmware up to date e.g my version is WHM1FN0931BR.
I've made some test with router settings: switch from automatic WPS configuration to manual and tried network mode as wireless b only (default was mixed). This makes the communication between router and printer continuous (no breaks), I could normally scan documents directly to network drive, but could not print at all: the printing option on my laptop pops up, and looks like document was sent to nowhere.. printer did not start to print at all. But other network devices starts to experience connection breaks and performance issues. When I returned to mixed mode, the communication between network devices returns to normal operation, but not with the printer - where I experiences original problems.
My network is quite complex - 4 laptops and 2 TV sets communicates (wireless or LAN 100mbit cable ) via cental router with NAS server (with DLNA) and internet (DSL cable modem). Router also works as DHCP server, where any server type devises (e.g my printer) has reserved IP addresses (based on MAC number). No matter if I try to print from wireless or via LAN cable laptop, no matter what OS is on laptop. I have even tried to connect the printer via LAN (forcing DHCP to give the LAN pronter the same IP as was previously for wireless ), and stil the same: communication is broked and the print starts and suddenly stops.., then starts angain after few minutes - and stops (the same problem as wireless). So I do not understand what the hell is going on. Rest of my network works perfect .. except this printer.. Any other idea, what coul be the issue?

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content?

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content? I want to buy an album that I cannot get hold of in Korea, but it is available in the US iTunes store. However since most of my apps are downloaded from the Korean store I'll need to switch back in order to update them. Does anyone know if there are any issues in doing this. I'd rather find out before I spend money, change my store setting back to Korea, and then get told I can't listen to the music because I bought it from the US store and my iTunes is set to the Korean store.
Cheers.

You canot easily change your country settings. The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store. You are also restricted to waiting 90 days between country changes.
E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE

How to solve sync problem between Outlook calendar and iPhone when reminder is set to _some_ non-standard values?

Hi,
I am having a sync problem between my iPhone/iPad and Outlook calendar events (Outlook 2010).
Here is the description of the problem:
1. In Outlook - please create a new event/appointment (e.g. "Test").
2. Reminder is set by default to 15 minutes. You can change it by using a dropdown menu - please select: "0,5 days".
3. Click on "0,5 days" and change it manually to "14,5 days".
4. Click on "Save & Close".
5. (Do not snooze or dismiss the reminder.)
6. Sync with your iPhone/iPad.
7. Open this new event on iPhone/iPad - you can see that alert is set to "15 minutes before" instead to a correct value that was set in Outlook.
The same problem can be seen if you set the reminder to e.g. "3 weeks" (standard value is "2 weeks").
However, it is interesting that non-standard values like "1,5 days" (and all other until "13,5 days") are synced without any problem.
Does anyone have a solution how to solve this problem (different than the trivial solution of not using those strange values)?
Thanks!

Thanks to another post (https://discussions.apple.com/message/17501071#17501071) I reset the sync history, here is what to do:
Launch iTunes.
Before you hook up your iPhone to the PC and iTunes do this: Go to iTunes Edit menu > Preferences… > select the iPhone > click the Reset Synch History button > click OK.
Connect the iPhone to the PC and let iTunes recognize it.
In the top right corner is the iPhone icon, click on the left side of the iPhone icon > the iPhone menu launches.
In the menu along the top click on Info > make your selections > click Sync button > it gives you a dialog at the top with the steps it’s going through during the sync.
In the top left of the iTunes app > click Exit.

Any problems/issues upgrading from iPhoto 6.0.6 to iPhoto 8?

Hello, I am about to purchase iLife 08 and upgrade iPhoto 6 to iPhoto 8. Does anyone know of any problems in doing this, pitfalls to watch out for, etc.? Thanks, PP

pokerpal
No issues but there are changes.
Have you your photos organised in Rolls in v6? If so, make sure that each roll has a name other than the default one. So make sure your Roll 123 is named Spring 06 or whatever, otherwise the rolls will be split into Events. The primary difference between Events and Rolls is that Events are based on the date the pics were taken, rolls on the dates the pic were imported.
You can rename rolls using the Info Pane (wee 'i', lower left) the name and date fields are editable.
If you've no interest in Rolls, then ignore the above.
Other than that make a back up, of course. Then update iLife and simply launch iPhoto. It will ask is it okay to upgrade the library. Say yes and off you go.
With iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Unix Style Package File. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. Before you panic:
There are many, many ways to access your files in iPhoto:
For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

Is there any difference between 10g and 11g M Views?

Hi,
I need to give a demo on and working examples of materialized views. The requirement is this: Master tables are in a 10g R2 DB, MV is in a 11g.
I just create a DB Link in 11g to point to the 10g DB and then create the MV in 11g.
Will there be any problems creating a 11g MV using 10 Master tables?
My question is are there any significant differences between 10g and 11g MViews??
Thanks & Regards,
Channa.

You have to be careful about your versions. 10g could be 10.1 or 10.2 11g could be 11.1 or 11.2
I wouldn't have an 11.2 database with a database link against a 10.1 database.
In fact, even with 10.2, I would try to ensure that I have a "high patchset" (10.2.0.4 or 10.2.0.5) although, in theory, 10.2.0.1 should also work.
See Oracle Support article
Client / Server / Interoperability Support Between Different Oracle Versions [ID 207303.1]
Hemant K Chitale

M-Audio M-Track problem with Mainstage 3.0.2

I recently purchased an M-Audio M-Track and wanted to use this to input guitar tracks into Mainstage 3. However, when I try, it does not recognize any inputs. The M-Track is working fine, because I can use it without any issue with Mainstage 2 and it also works fine with Ignite. I have seen other entries in the forum for with the same issue for the Fast Track. For the Fast Track, it appears that the problem was fixed with new drivers. However, there are no drivers for the M-Track. Has anyone been successful in getting 3.0.2 to recognize inputs for the M-Track?

Hello, crosbygs.
Thank you for visiting Apple Support Communities.
Here are a couple resources I would recommend going through for this issue.
MainStage 3: MIDI devices overview
http://support.apple.com/kb/PH13519
MainStage 3: Audio preferences
http://support.apple.com/kb/PH13675
Cheers,
Jason H.

Is there any relation between feilds " reason, code, code group , sub pro

is there any relation between " reason , code , code group , subject profile'
Actually i have make "reason" feild has default value ..
i have to do by RFC .
Cany any body plz reply from where i have to pick this reason feild and set reason feild has default value has " not started "
thanks,
aravind.

Hi,
Subject profiles are used in different areas like
Service
Complaint
Activity reason(Used in all documents like sales,service order)
There is a relationship between Codes, Code groups, code group profiles, Catologs, Subject profiles.
Do not confuse 'Reason' with 'Code' or 'Subject'(Not subject profile), all are same. In different contexts you call them with different names.
1. In IMG while creating codes you use the name "Code".
2. While entering details about activity in any business transaction you call it as a "Reason"
3. While entering the defect of the problem in Service or complaint doc. you use the name "Subject"
In all above cases it is equivalent to name "CODE' which you define in IMG.
Now coming to relationship of above mentioned entities, in any business transaction type customization you can select "business activity" as additional business transaction category. At the customizing header level of this bus. tran. category you are allowed to enter a "Subject profile" which controls your "Reason" field in the business transaction.
In a similar way for service or complaint order you are allowed to enter a "Subject profile" for entering "Subject" in respective transactions.
Each subject profile is assigned to Subject profile category like Service, Complaint, Activity reason etc.,
1. First define catalogs
2. For each catalog define code groups and codes( Code, subject, reason mentioned earler)
3. Create 'Code group profile' for each catalog and assign assign 'code groups' that are relevant for coreesponding catalog to 'code group profile'
4. Now finally create a "Subject profile" which is the combination of "Catalog and code group profile"
I think this would clarify your doubt.
Coming to default value in this reason field, the standard system will not support this. You sholud use some Badi to get this.
Reward points if it helps.
Murali

Is There any Relation Between PCD and SSO

Hi,
Is there any relation between PCD and SSO, why because if i am try to connect from portal to R/3 in the user mapping i got one error i.e some pcd error.
pls tell me how to rectify that.
Regards,
Jagadish Babu Kanikanti.

Hi Jagadish
The PCD is only a central persistance for storing Portal objects. There is no such relation between PCD and SSO that could create a problem. You can however check for the PCD error in this manner.
1. In the system administration role, choose System Administration -> Support. The Support Desk appears.
2. Select the area Portal Content Directory.
3. Click on PCD Configuration in the test and configuration tools. The next screen shows all the parameter values currently maintained for the PCD.
4. To reload the configuration, choose Reload.
Hope that helped.
Best Regards
Priya

Color problems between Lr5 and other software

I can not see where to make adjustments to get the same tones between Lr and my other software: Photoshop, Irfanview, Windows Viewer ...
My test conditions:
My monitor is calibrated
... - Export Lr Jpeg quality 85% and also tests 16bit TIFF (sRGB, Adobe rgb and prophoto)
... - When exporting, I checked the "add to catalog" to view the same image in Lr.
Conclusion: Other software gives almost the same tones (some small differences due to the chosen color space) and Lr gives a much warmer picture (Raw or treated Jgeg reimported in the catalog). Will it have a preference of Lr to settle?
Note: the direct opening of RAW file in Photoshop with Camera Raw (same engine as Lr) without special settings, also gives a duller color different image, that directly Lr.
What is the solution?

In general, any difference between Lightroom and other color managed software is indicative of a corrupt monitor profile. No idea about Irfanview, but Lightroom, Photoshop and Windows Photo Viewer should all display identically.
What they all do is convert from the source/document color space to the target color space, which for display is your monitor profile. The result should be identical - that is in fact the whole point of color management. But since the source space may be different the actual conversion itself may also be different. So one conversion may go bad but not others.
A difference between Library and Develop will have the same explanation (different source spaces; Library is Adobe RGB while Develop is linear ProPhoto).
It also happens that different applications react differently to a bad monitor profile. It may work in one application and fail in others.
Any software that is not color managed will simply display in the native monitor color space, which can be anything under the sun, so you can just ignore and disregard that. It won't be accurate anyway.
So the solution is to have a valid and healthy monitor profile. Then everything color managed will display identically (save for gamut differences, but in practice that only applies if you have a wide gamut monitor. With a standard monitor any source space will have equal or larger gamut than the monitor).
Some calibration software has been known to not follow specifications strictly at all times, so check for updated software. Or the profile can simply have become corrupt. It happens. A way to test this is to set sRGB as default monitor profile in the OS - or Adobe RGB if you have a wide gamut monitor - and see if the problem clears.

Compatibily problems between flash media live encoder 3 and fms version 2 ?

hello
i am trying to setup a stream for a live event we plan
for this we want to use our "flash media server v. 2.04" and
to encode the video the
"flash media live encoder 3"
but im really shocked about the poor quality - actually its
not working
the video is freezing for a while an then playing back very
fast and then freezing again
and the audio is stuttering
i tried propably all kinds of combinations of the settings
without any success
very often the encoding session is being stopped and started
again with the following
error message:
Fri Mar 13 2009 05:02:22 : Audio Encoding Started
Fri Mar 13 2009 05:02:22 : Video Encoding Started
Fri Mar 13 2009 05:03:09 : Unexpected error encountered in
encoding process.
Fri Mar 13 2009 05:03:10 : Audio Encoding Stopped
Fri Mar 13 2009 05:03:10 : Video Encoding Stopped
Fri Mar 13 2009 05:03:10 : Session Stopped
Fri Mar 13 2009 05:03:10 : Session Started
Fri Mar 13 2009 05:03:10 : Audio Encoding Started
Fri Mar 13 2009 05:03:11 : Video Encoding Started
and the media server says:
Sending error message: Method not found (FCUnpublish).
Sending error message: Method not found (releaseStream).
sometimes it restarts only the audio encoding
the machine for the streamingserver (windows version) is
realy strong an has a very fast
internet connection
the encoding machine is a 2.2ghz macbook pro with windows xp
and 6000 dsl connection
with the low bandwidth factory setting of the flash media
live encoder the cpu usage is
about 16%
for the videoinput i want use a canopus ADVC-110 firewire
capturedevice
but i also tried the apple isight usb 2.0 laptop-camera and a
logitech quickcam express
usb 1.0 webcam
all with negative results
two colleques encountered the same problems on their machines
but when i upstream the video with an standart flash client
the videostream runs stable
without any problems
so i guess the problem is the flash media live encoder
is there a compatibily problem between the server version and
the encoder version ?
thanks in advance for any hints

Hi,
FMS 2.04 version doesn't support H.264 and AAC/HEAAC. So, you
can only use Vp6, Mp3 and Nellymoser codecs in FMLE for streaming
to this server.
You are getting "Unexpected error" message within 50 sec of
your encoding session. This error occurs when either of the video
or audio device doesn't function properly. As you have mentioned
that various video devices gave negative results, try to use a
different audio device or uncheck the 'audio' device option and
encode only video.
Exactly what was the nature of the negative results for
different video devices? Was it the same "unexpected error"
problem? Please share the steps, device and encoder settings also.
When you observe video freezing and audio stuttering problem
while playback, reload the flash player and let me know if you
still see the same problem.

Any problems with migrating In Design files from Mac to PC?

My wife is a commercial artist, and we are considering getting CS4 here at home on our PC. She has a Mac at work. Are there any problems with switching files between the Mac and the PC so she can get some work done on the same files at both the office and at home?
Thanks!

One recurring problem I have is the different types of the Symbol font. Mac InDesign insists on adding (TT) -- "Symbol (TT)" -- to 'Windows' documents, and vice versa. I think the root of the problem is Symbol on Windows is an OTF font, whereas on the Mac it's still a 'regular' TTF. My Mac compadres tell me it's not easy to transfer the Windows font to the Mac -- its own version apparently being rooted deep inside the system.
However, it's not a big issue, as we by default encapsulate Symbol with a character style. So when ID alerts us, all we have to do is redefine this style, be it on Windows or on Mac. Fortunately I've never seen text reflowing because of this (knocks on plywood desk).

I am using Quicken 2007 (16.1.4) and had no problems before upgrading to OS 10.10 Yosemite. When attempting to download security updates from my financial institutions (UBS and Fidelity), I get the following error OL-290. Any fixes?

I am using Quicken 2007 (16.1.4) and had no problems before upgrading to OS 10.10 Yosemite. When attempting to download security updates from my financial institutions (UBS and Fidelity), I get the following error: Quicken could not connect to the server. Please try again later. [OL-290] I understand this is because of a mismatch between SSL certificates at the financial institutions and Apple's SSL certificate included with OS 10.10 Yosemite. Any fixes to this issue?

I have the same problem but Q for Mac 2015 does not meet my needs. Is there a fix for this problem?

Any problem between mainstage 2.2.2 an yosemite?

Similar Messages

Maybe you are looking for