Any standard BAPI available to get the project manager name or id

Hi all,
Any standard BAPI available to get the project manager name or id  for the particular  employee working on that project.
Regards,
Surjith

I dont know abt any BAPI but this FM do the same so can be copy to RFC enabled and use the same.
HRCM_GET_ORGUNITS_FOR_MANAGER
Regards,
Amit
Reward all helpful replies.

Similar Messages

  • Is there any standard BAPI available to vendor , customer and G/L ?

    Hi all,
    any standard BAPI available to vendor , customer and G/L? I found BAPI_CUSTOMER_CREATE and BAPI_VENDOR_CREATE but when i traying to execute , then control directly taking to XD01 and XK01 initial screen's .i need to create vendor and customer master data using BAPI(data will come from legacy system).
    Other than these , is there any standard  BAPI available .Pl tell me
    Regard's,
    Pratap.

    Hello Pratap
    For customer the following BAPI is available:
    BAPI_CUSTOMER_CREATEFROMDATA1
    "This fm uses a reference customer as template for the new customer.
    " Using this BAPI you cannot create a new customer from scratch
    Regards
      Uwe

  • Is there any standard Adhoc query to get the Previous employers list

    Hi Experts,
    Is there any standard Sap Adhoc query available to get the details of Previous empoyers list.
    Please advice me to get the list of employees with their previous employers..
    Thank you very much.
    Regards,
    Vishnu.

    Hi Vishnu,
    U could go as per wat Suhasini has said. But if u want the end user to view this report time and again, then u need to create a query.
    The steps are as follows:
    1) T-code: SQVI
    2) Qucik View: give some name here and then click on "Create"
    3) You will get a "Create Quick View" screen.
    4) Goto "Datasource" and select "Logical Database" from the drop down
    5) Then goto "Tableview" and enter "PNCPE" and click on enter.
    6) A screen pops up and click on the Infotypes u would want to extract the data from and press enter.
    7) Now, u would get the following screen "Qucik Viewer: Initial screen". Here u can see coulple of tabs.
    8) Goto the tab "List selcted field" and select watever fileds u want in the output screen and then press "Execute".
    Hope this would solve ur issue.
    Thanks

  • Are there any standard BAPIs available to load Vendor and Park invoices?

    Hi Gurus,
    do we have standard BAPI;s available to load "Vendor" master data and to "Park Vendor Invoices"? Please advise,
    1) I wanted to load vendors from the flat file, with input fields and it is a mass update.?
    2) I wanted to park the documents around 100 or so at one time, not posting?
    Any suggesttions on the Bapis available?
    Thanks
    Surya

    Ravi,
    Thanks for your suggestions. But BAPI_VENDOR_CREATE doesnt have any input fields, am not sure how it is used???  And also, I am sepcifically looking for BAPI;s LSMW will do but looking for more of a web service kind of service with BAPI. I am looking for a service which reads fields from input file and store in LFA1 table.
    Also regarding the second BAPI, i read in some threads that we need PO number to park it, but my invoices have only reference from the old system, not PO number, does this matter??
    Thanks
    Surya

  • Is there any Standard BAPI's to update the table BP021?

    Hi,
    I am developing an inbound program to update the Business Partner Master(BP021) table. I need to update the field 'Staff_Count' in that table.
    Is there any BAPI's available to update the BP021 table? Thanks in advance for your help..
    Poornima

    Hi,
    Some FM's are available.
    Please refer these FM's
    FS_API_BP021_CHANGE            Change Fiscal Year Information
    FS_API_BP021_GET                    Read Fiscal Year Information
    FTB_BUPA_BP021_GET
    FTBP_READ_BP021
    FSBP_READ_BP021
    Regards,
    Jyothi CH.

  • Is there any standard report available to view the loan payments for the FY

    Hi Experts...
    Is there any standard report to view the loan payments taken by the employees in a paticular financial year.
    We are entering the details of loans through 0045 and through a subtype.
    When im using tcode pcoo_m99_cwtr...
    thet are showing up details with out employee number.
    How we cn get the details of amount recoverd/deducted from employee salary of a particular employee in the financial year.
    Regards,
    VSai.

    hi
    check the std transaction:-
    pc00_m40_lon1  (this is for india specific)
    Regards
    sameer

  • Is there any java api available to get the process identifier ?

    Hai,
    I am in need to get the process identifier of a running process.
    Is there any API available or any shell script which can be used in exec command
    to get it.
    Thanks in Advance.
    Kavitha M.

    Hint: Don't use the exec command! This would spawn off a new shell with a different PID. You might want to look at JNI (Java Native Interface) to attach a piece of C code to your Java application that can find out the PID.

  • Is there any Fm or Bapi available to see the direct reportees of a manager

    Is there any Fm or Bapi available to see the direct reportees of a manager
    i have the managers id could i get the employees under that manager
    is there any SAp fm for the same

    Like Aditya, I have not seen such a function module. However, there is a standard evaluation path which may be suitable for your purpose. It is called BOSSORG and will give you all the employees under a manager.
    Use it with function module RH_GET_STRUCTURE or RH_STRUC_GET. The latter lets you specify parameters directly, while the former takes them in container form. None of them are released for customer use unfortunately, but I haven't found a corresponding function module that is released.

  • Is there any standard BAPI to update the standard transaction GS03 ?

    Is there any standard BAPI to update the standard transaction GS03 ?
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
    Edited by: Thomas Zloch on Jun 16, 2011 2:02 PM

    hi,
    I think this link will help you to find that.
    list of all bapis:
    http://www.planetsap.com/LIST_ALL_BAPIs.htm

  • BAPI for Creation of the Project in ECC using Standard Templates

    Hi,
    I want BAPI for Creation of the Project in ECC using project id and project standard template ID
    and BAPI for Updating of project and WBS element  using  project id and WBS element ID

    One idea is to write a wrapper FM that is remote enabled and internally call BBP_PD_CTR_CREATE for your own use.

  • Is there any standard SAP table which stores the license number assigned to a delivery item

    Hi Experts,
    This is in relation to license number assigned to a delivery item under ‘Export License Log’. Our scenario is for delivery of type NLCC created for an inter-company stock transport order. (i.e.not a sales order case where the license may get copied from sales order to delivery through copy control)
    As we understand, for legal control – relevant scenarios, export license for each item shall be determined afresh every time the delivery is accessed. (Depending on legal regulation, grouping, destination country, export control class, delivery partners vis-à-vis license master customer assignments etc.)
    To print the license text on one of the delivery output types, we want to access the license number for each item. (determined under export license log)
    Our question is:  is there any standard SAP table which stores the license number assigned to a delivery item?
    We have checked some of the license tables (T606*, VAEX, EMXX etc.) but couldn’t get any specific table storing delivery-item-specific license data.
    Helpful answers Text Removed
    Regards,
    Jagan
    Message was edited by: G Lakshmipathi
    Dont add such text in your post

    Hi Lakshmipathi,
    The export control log can be accessed by going to delivery Extras-> Export license log
    We need a table that stores the determined license for each item in a delivery document ( as shown in the below screenshot)
    Regards,
    Jagan

  • I have been exporting lightroom webgaleries to my iweb site without any problem.  Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - thoughts?

    i have been exporting lightroom web galleries to my iweb site without any problem.  Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - and the move to the sites folder on my idisk fails..... thoughts?

    Try this community: MobileMe on my Mac: MobileMe: Apple Support Communities.
    And you can continue to use iWeb for some time to come. The following will explain:
    It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
    On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
    Features No Longer Available Once MobileMe is Discontinued:
    ◼ Password protection
    ◼ Blog and photo comments
    ◼ Blog search
    ◼ Hit counter
    ◼ MobileMe Gallery
    All of these features can be replaced with 3rd party options.
    I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken.  If I published directly from iWeb to the FPT server those two features continued to work correctly.
    There's another problem and that's with iWeb's popup slideshows.  Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
    Click to view full size
    However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone.  How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
    In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
    HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD.

  • (1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elem

    (1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elements 12. In older version the menu would stay on the screen.
    (2) In pan and zoom how can start zoom on a photo in the original picture and zoom in and the next picture zoom out and the next photo pan from right to left and the next photo pan left to right.
    Thanks
    Sam

    TidyCup
    What computer operating system is your Premiere Elements 12 running on? If you have not already, be sure to update 12 to 12.1, using an opened project's Help Menu/Update.
    But to the immediate questions, assuming Windows 7, 8, or 8.1 64 bit....
    1. No, it is what it is. But, are you applying the same transition each time? If so, then highlight/select all the clips involved (all at one time), then Timeline Menu/Apply Default Transition will do just that for the highlighted/selected clips.
    To highlight/select more than one clip at a time, hold down the Shift key of the computer main keyboard and then click on each clip that you want in the group selection
    or
    with your mouse cursor draw a rectangle around the clips that you want to select
    2. Are you using the Premiere Elements 12/12.1 Expert workspace Pan and Zoom Tool? Or the pan or zoom presets under fx Effects/Presets/? With those you can do pan or zoom, not pan and zoom.
    Or, are you in the Elements Organizer 12 Slideshow Editor using the pan and zoom effect there? Or, are you using keyframing the Motion Scale property for zoom and the Motion Position property for pan?
    Are you asking about photos with landscape or portrait orientation?
    The pan and zoom tool does one photo at a time.
    Have you read the Adobe documentation on the Pan and Zoom Tool?
    http://help.adobe.com/en_US/premiereelements/using/WSeffff8bffc802084-494411db12fd35452dd- 8000.html
    Please review and clarify and then we can get into greater details on this.
    Thanks.
    ATR

  • Any standard BAPI for CHARM_CREATE

    Hello Experts,
    I have a scenario wherein the change request has to be created in SOLMAN from an external application. So, I would like to know if there are any standard BAPIs / interfaces for creating a change request in SOLMAN .
    Any pointers in this regard will be highly appreciated.
    Best regards..

    Hi,
    Please check this function module.
    SOCM_CHANGE_REQUEST_CREATE
    This will solve your problem feel free to revert back.
    --Ragu

  • Any standard SMARTFORMS available for purchase order, sales order, invoice

    Hi,
    Any standard SMARTFORMS available for purchase order, sales order, invoice ?
    RR.

    Hi Rama,
    Goto NACE tcode-> choose the application u want( like billing for invoice, PO)->output type->output type->processing routineon left side
    Here u will find the standard program name and smartform .
    Hope it helps.
    Regards,
    Sonika

Maybe you are looking for