BAPI for Creation of the Project in ECC using Standard Templates
Hi,
I want BAPI for Creation of the Project in ECC using project id and project standard template ID
and BAPI for Updating of project and WBS element using project id and WBS element ID
One idea is to write a wrapper FM that is remote enabled and internally call BBP_PD_CTR_CREATE for your own use.
Similar Messages
-
BAPI for Creation of inspection lot
I have two scenario:-
1.Can any body help to find BAPI for creation of Inspection lot for the material under PO envisaged for PDI.
2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
My objective is to creation inspection lot without assigning Inspection type of Z01SI01 or Z01SI02 and so on in the material code under a respective Plant 1004 or 1005 0r 1006 so on.
In my Z Development for creation of inspection lot BDC is run for QA01 as this code created inspection lot on when material code has inspection type Z01SI01 i.e. location of source inspection and vendr code particular classification under 010 vendor class inspection type Z01SI01. System search both the inspection type for both material and vendor then create inspection lot in QALS table by assiging inspection matching inspection on the lot.
I want to get rid of assignment of inspection on the materilal. If any BAPI or FM is avalable for creation of inspection without assigning inspection type on material code. I want to create inspection lot in which Inpsection type assignment can be done based on vendor class only.
YPB2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
I am very sure that this is not possible.You can not create inspection lot without inspection lot origin or inspection type.
Regards
Sujit -
BAPI for creation of subcontract PO
Hi all,
Currently iam doing a BAPI for creation of subcontract Purchase Order using the BAPI_PO_CREATE1. But in this BAPI iam unable to find the table for entering Components.
Regards,
Sun.Hi,
I wil give you how to fill the components of PO items, it is a sample code;
*zPoHeader
if kna1-kunnr eq 'BOR020'.
zpoheader-comp_code = '0040'.
endif.
if kna1-kunnr eq 'BOR040'.
zpoheader-comp_code = '0048'.
endif.
zpoheader-doc_type = 'ZSA'.
zpoheader-doc_date = mkpf-budat.
zpoheader-vendor = 'BOR050'. "şimdilik
zpoheader-pmnttrms = 'Z030'.
zpoheader-purch_org = '1100'.
zpoheader-pur_group = '101'. "malzeme ÜZERINDEKI marc-ekgrp
zpoheader-currency = zsaleshead-waers.
zpoheader-item_intvl = 10.
zpoheaderx-comp_code = 'X'.
zpoheaderx-doc_type = 'X'.
zpoheaderx-vendor = 'X'.
zpoheaderx-purch_org = 'X'.
zpoheaderx-pur_group = 'X'.
zpoheaderx-currency = 'X'.
zpoheaderx-doc_date = 'X'.
zpoheaderx-pmnttrms = 'X'.
zpoheaderx-item_intvl = 'X'.
*zPoitem
loop at i_posnr.
lv_ebelp = lv_ebelp + 10.
zpoitem-po_item = lv_ebelp.
zpoitem-material = i_posnr-matnr.
if kna1-kunnr eq 'BOR020'.
zpoitem-plant = '0040'.
zpoitem-stge_loc = '4001'.
endif.
if kna1-kunnr eq 'BOR040'.
zpoitem-plant = '0048'.
zpoitem-stge_loc = '4801'.
endif.
zpoitem-quantity = i_posnr-menge.
zpoitem-po_unit = i_posnr-meins.
zpoitem-net_price = i_posnr-bfiyat.
zpoitem-price_unit = 1.
zpoitem-tax_code = 'V0'.
zpoitemx-po_item = lv_ebelp.
zpoitemx-po_itemx = 'X'.
zpoitemx-material = 'X'.
zpoitemx-plant = 'X'.
zpoitemx-stge_loc = 'X'.
zpoitemx-quantity = 'X'.
zpoitemx-po_unit = 'X'.
zpoitemx-net_price = 'X'.
zpoitemx-price_unit = 'X'.
zpoitemx-tax_code = 'X'.
append: zpoitem, zpoitemx.
clear : zpoitem, zpoitemx.
endloop.
call function 'BAPI_PO_CREATE1'
exporting
poheader = zpoheader
poheaderx = zpoheaderx
tables
return = zreturn3
poitem = zpoitem
poitemx = zpoitemx.
Send me your results,
Kenan. -
BAPI for return/supplement the funds for both overall and fiscal year.
I have a development requirement for following and I am new to Investment ,management and Project
Systems functionality.
Your help will be appreciated
The new transaction will use the upload data to create returns and/or supplements to Marketing budgets. The following is what the transaction will do per request:
Verify funds are available to shift. The program will do this by creating an error log for items that do not meet this criteria. The program will process all line items that have available funds (IM52).
Q pls let me know what BAPi/FM to use to verify whether funds are vailable or not
Return the funds for both overall and fiscal year (IM52).
Q Pls tell me BAPI for same
Supplement the funds for bother overall and fiscal year (IM52).
Q BAPI for same
Deactivate the availability control for the WBSEs affected (CJBW).
Q How to do that and BAPI/FM for same
Activate the availability control for the WBSEs affected (CJBV).
Q How to do that and BAPI/FM for same
Add appropriate text from the data in the upload spreadsheet (this may be a concatenation of data from the columns in the upload) (IM52).
Not clear what user is trying to say
The transaction needs to be able to handle whole dollars as well as numbers that might include up to two decimals: e.g. .01 (IM52).I am answering my own question since i completed the above development by using the FM KBPV_POST_DATA .
It will post to all the BP tables and is tested successfully. -
Bapi for creation of a contract against services.
Hi.
i just want to know the correct bapi for creation of contracts against services..here i was tried with BAPI_CONTRACT_CREATE but the documentation says that it is not supported for exxternal or internal services.
so iam not sure if this bapi is the one for contract creation for services.
any way i was tried to test this function module but i havent got Contract created.
wil be waiting for an excellent answer.
bye.
reegards.
seetaram.Hi Ram,
Try the function module
BAPI_CONTRACT_CREATEFROMDATA.
Once you create the contract, update the technical objects for the contracts
using two function modules called one after another.
IWOL_WV_ADD_OBJECTS
IWOL_WV_POST_OBJECT_LIST
Regards,
Chandra Sekhar -
BAPI for Creation of Maintenance Plan (TCode - IP01)
Hello
Kindly help me with the BAPI for Creation of Maintenance Plan (TCode - IP01)
Thanks and Regards
AvishekHi
Check Tcode: IBIP. and LSMW method and below link it may be helpful.
[link|Re: LSMW for uploading equipment.]
Thanks,
Asit Purbey. -
Any standard BAPI available to get the project manager name or id
Hi all,
Any standard BAPI available to get the project manager name or id for the particular employee working on that project.
Regards,
SurjithI dont know abt any BAPI but this FM do the same so can be copy to RFC enabled and use the same.
HRCM_GET_ORGUNITS_FOR_MANAGER
Regards,
Amit
Reward all helpful replies. -
I keep getting this message from Imovie:
Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)Bartirn,
I called Apple under my Mac support contract. They were completely unfamiliar with the error you and I were encountering. Updating to 10.8.5 didn't help.
I'm stopping my TimeCapsule while I perform these tasks, but I don't know yet if I have a consistent work-around.
B -
In iMovie I am getting this message...Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. File already open with write permission.
How do I resolve this?Hi
Most often it helps by - Turning Off the TimeMachine application - during work in iMovie.
Yours Bengt W -
this error occurs. Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured. (Project is too Long)
I know this isn't true, as it is only 1:39:31. I have a mac with 160mb and 160 gb available. Could this be the problem? If so how can I remove some things to make room? Thanks!!By exporting to the right format a movie of an hour and forty minutes could potentially use up 160 GB, exactly what format are you exporting to. additionally I'm not clear what you mean when you say your mac has 160 MB and 160 GB available.
-
Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP
Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
Trash the Preference file:
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
• Mac OS - most probably X.7 or more
• iMovie version - more than iM'11 v. 9.0.4
Action taken
• Finalizing project - I never do as I never understood the gain to do so
• Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set
•I only use PAL (25fps)
Yours Bengt W -
BAPI for DELETION of the Purchase Requisation entry from DB?
Hi Experts,
1) Pls. let me know that, Wht is the good BAPI for DELETEion of the Purchase Requisation entry from the Data Base.
The tx code is ME52N(BAPI_REQUISITION_CHANGE, BAPI_PR_CHANGE)
2) pls. also let me know the INPUT PARAMETERS for the suggested BAPI
thanq
Edited by: Srinivas on May 7, 2008 12:20 AMYou can use this BAPI to delete PR line item.
BAPI_REQUISITION_CHANGE
BAPI_REQUISITION_DELETE
Chk this for sample.
work flow object type for purchase requisition -
Get the project name to use in a procedure?
How to get the project name to use in a procedure?
example <% = odiRef.getOption ("COMPATIBLE")%> - but the project name or your id?
in ODI 11.
thanks
Edited by: user ODI Dev on 01/12/2010 16:42I also need solution for this issue.
I want to set ODI variable value in Jython script, this method described there: How to assign value for a ODI variable from Jython Script
I need to update snp_var_data table. For more flexible solution i need to know project name where variable declared, because variable name in snm_var_data consist of two part <PROJECT_NAME>.<VAR_NAME>. Also this name convention don't changed after import scenarios from dev to execution repository
Edited by: 822130 on 19.12.2010 4:31 -
HT204266 Can I pay for purchases in the UK App store using Paypal?
Can I pay for purchases in the UK App store using Paypal?
Accepted form of payment
http://support.apple.com/kb/HT5552 -
BAPI for creation of material documents/movements
Hi Everebody:
I need some help regarding to bapis for the creation of mateial documents and/or movements. I have been trying to implement bapi BAPI_GOODSMVT_CREATE, but this bapi does not have (import) the posting time in document, which is very important for my porpuse.
So, I would appretiate a lot any information anybody could give about any bapi I could use to create material documents or material movements but incluidng the posting time in document (field MKPF-OIB_BLTIME).
RegardsYou can check MB_CREATE_GOODS_MOVEMENT which has mkpf as inporting parameter.
Maybe you are looking for
-
3 iphones on the same iTunes account receiving each other's calls
I have 3 iPhones on the same iTunes account and they were receiving each other's texts. I adjusted the numbers to send and receive under messages in settings, but now they are receiving each other's calls. Which settings do I need to go to? Thank y
-
Restore Web TV items after hard reset
Hi, I did a hard reset of my N8. Now my CNN, Nat. Geo. Web TV links are gone. They are also not in the Ovi Store. How to get them back ?
-
Making "Go to a Page View" the Default Link Action
Up until recently, it was quick and easy for me to add a "Go to a Page View" link to PDFs in Acrobat Pro. I highlighted the text I wanted to link, right-clicked on it, and then selected Create Link from the pop-up menu. At that point, the Create Link
-
How are session timeouts handled
Hi, Can anyone tell me how session timeouts are handled by the Servlet Engine. What is the exact role of the SessionInvalidator class. Are sessions correctly timed out by iAS, because I get strange behaviour in handling session timeouts in my applica
-
My iMac computer screen is blurred by black and white lines.
My iMac G5 screen is blurred by black and white horizontal lines and tiny rectangles. This occured after I woke it up from sleeping. Everything else seems to be working fine, but is impossible to see what I'm doing. Any ideas on how to fix this?