Any suggesstions on how to manage 100+ indicator and containers

I have an app I have been rewriting in an effort to ease life cycle support  ( I won't mention it was one of my first apps and my code looks like spaghetti)
I have two areas I could use some advice on
1.  There are so many buttons that the event structure drop down list becomes quite long and becomes a pain to use.  What are some good ways to overcome this?  I thought of using multiple Que / Producer loops  or multiple event structures in the same while loop but was afraid that could lead to a race condition.
2.  Where is the best place to hold ALL the controls?  Inside a while loop or outside the while loop in a stacked frame to keep them in goups
without taking up a lot of screen space?
Thanks
Tim C.
1:30 Seconds ARRRGHHH!!!! I want my popcorn NOW! Isn't there anything faster than a microwave!

I would also advise considering subpanels or pop-up VIs. This will allow you to move code into subVIs and simplify the main VI.
With regard to your question about multiple loops with event structures, there's no real problem with that, as long as you:
Don't handle the same event in more than one loop.
Don't wire event registration refnums to more than one loop.
Don't have a race conditions caused by having multiple events fire close to each other.
Use filter events without understanding how they are handled. 
Probably some others.
The main problem with this is that you create a potential for race conditions and that figuring out which event should go in which loop might be tricky.
Tim C. wrote:
Is there any other benifits to keeping the control insid ethe event?
As you mentioned, latched controls are a good reason. A latched boolean unlatches when the terminal is read in the diagram. This is a good reason to place the boolean in the event case, because that code is guaranteed to execute when the control changes value and will thus unlatch it. Your double events comes from using latch until released. If you want the event to only occur when releasing the control (which is a standard UI behavior for Windows, at least), just leave it at the default latch when released.
Try to take over the world!

Similar Messages

  • How to manage multiple ipads and iphones on the same computer

    Any advice on how to manage multiple iphones (iPhone 4S, iPhone 4 & iPhone 3G) along with an iPad & iPad 2 on the same computer?
    Thank you

    The article that AnaMusic references assumes that you sync automatically I believe. Turn off auto sync and select whatever you want to put on each device. As Philly said, it really is a snap. I have never synced automatically and I never selected iTunes to start up when my iDevices are connected. I want the control over all of that.
    Launch iTunes on your computer and go to Edit>Preferences>Devices>Prevent iPods, iPhones, and iPads from syncing automatically. Check that box and then quit iTunes.
    Connect your iPad to your computer, launch iTunes, click on your iPads name on left sidebar under the devices heading and then click on the summary tab in the iTunes window on the right. Select - Sync only checked songs and videos. If you really want to "live dangerously" - uncheck Open iTunes when this iPad is connected. Now you can control what you sync and when iTunes starts up. iTunes will not start up when you connect the iPad and it will not sync anything on its own.
    Go into each tab in iTunes, Info, Music, Apps, .... All of them - check what you want to sync in each section. After you have made all of your selections (and you have checked all of the headings - Sync Music, Sync Apps and so on) click on Apply in the lower right corner on iTunes and the sync will take place.
    Do this with each iDevice and iTunes will remember what you selected for each device the last time that you synced. You can make changes to this configuration any time that you want for each device and if you do just remember to click on Apply in the lower right corner of iTunes in order to apply the changes.

  • I am working in Numbers and can't seem to change the generic value assigned to the legend.  Any advice on how to select the legend and save new values?

    I am working in Numbers and can't seem to change the generic value assigned to the legend.  Any advice on how to select the legend and save new values?

    Ntenich,
    If your table has a Header and your Legend text is in the header, it will be picked up by the table.
    Jerry

  • I downloads the latest iTunes software update and it properly installed.  But,  I cannot close the window showing it was completed and the blue completion bar is full but cannot cancel or close it either.  Any ideas on how to clear that out and close the

    I downloaded the latest iTunes software update and it properly installed.  But,  I cannot close the update window showing it was completed and the blue completion bar is full but cannot cancel or close it either.  Any ideas on how to clear that out and close the window.  Tried to quit on both the big window and the software update title in the menu bar.  No luck.

    Tried that by shutting down via the power button only as the normal shutdown was nixed by the open window issue.  It did not help.  Found a very similar question in the discussions and it recommended "Force Quit".  That worked and the update works normal and the window is gone.  Thanks!

  • One of my kids changed my password, and now i can't access my mail accounts. Any ideas on how to override the password and set up a new one?

    one of my kids changed my password, and now i can't access my mail accounts. Any ideas on how to override the password and set up a new one?

    A mail account password or you login password?
    Which OS by the way?

  • How to manage Music Videos and Podcasts of my iPod manually in iTune?

    Can anyone tell me how to manage Music Videos and Podcasts of my iPod manually in iTune? Because I can't see the Music Videos and the Podcast section in iTune under Device when my iPod is connected to my computer. Thanks

    iTunes doesn't have a separate *Music Videos* section. In iTunes these are just part of the main Music library. To manually drag a music video to yout iPod drag it onto the iPod or a compatible playlist. To remove, look for it in Music on the iPod and delete.
    I think podcasts only work properly when placed on the iPod via the sync tabs. If you manually drag and drop then the files may get treated as general audio & video files.
    tt2

  • How to manage Active directory and tools to manage Active Directory

    How to manage Active directory and which tools we use?

    You can use Microsoft Active Directory management tools:
    http://technet.microsoft.com/en-us/library/aa998508(EXCHG.65).aspx
    http://technet.microsoft.com/en-us/library/aa998508(EXCHG.65).aspx
    erview of Server Message Block signing
    http://support.microsoft.com/kb/887429/en-us
    Remote Server Administration Tools for Windows 7:
    http://www.microsoft.com/downloads/details.aspx?FamilyID=7d2f6ad7-656b-4313-a005-4e344e43997d&displaylang=en
    AD Admin Center:
    http://technet.microsoft.com/en-us/library/dd560651(WS.10).aspx
    http://technet.microsoft.com/en-us/library/dd560652(WS.10).aspx
    Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+ Houston, TX http://blogs.sivarajan.com/ http://publications.sivarajan.com/ This posting is provided "AS IS" with no warranties, and confers no rights.

  • How to manage marketing events and keep trask of subscribers ?

    Hi all,
    I'm working on CRM request for proposals in France and I have more and more often one business requirement coming from the customers.
    They often asks to generates outbound campaigns for event that they organize. It could be Sales event, Marketing events, Training sessions etc... ?
    So, for that, they are doing target groups, generating outbound campaigns and have to manage customer feedback and booking if customer accepts. For some customers, it could also generates one billing flow once the customer has booked his participation.
    Do you have any idea on how to handle that in SAP CRM as much easy as possible, how to easily follow-up registrations and use reports on that ?
    Do you know if part of this process could be managed thru RDS ?
    Many thanks in advance for those who could help me.
    Best Regards.
    Stephane BENETEAU

    Hi Stephane,
    It looks like you are looking for more information on Campaign Automation.
    Please see these links. I am sure u will get lot of helpful information.
    http://help.sap.com/saphelp_crm70/helpdata/en/45/ff8980cbb709eee10000000a1553f6/content.htm
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20283126-36ca-2d10-6983-92ed18d36644?quicklink=index&overridelayout=true
    Also Campaings come under CRM Marketing. So you will get more focused information in the Marketing Forum.
    SAP CRM: Marketing
    rgrds,
    Randhir

  • How to manage one wsp and dll for multiple clients in farm environment

    1. There is a product which is developed using C sharp , jquery,CSS and sharepoint object models which have been packaged into .wsp file. Whenever we introduce new functionality to the product we used to branch the
    previous code as a version , say Version 1.0 and new functionality of the product will in another solution. This is how we are managing the code in TFS as versions. Each newer version will have new functionalities. We do not give latest functionality for all
    the clients. Each client is having its own version of functionality. Technically in order to access the functionality, the wsp solution should be present in the solution repository which is available in SharePoint central administrator site. This solution
    will be deployed on the client’s site. We are following the above process in SharePoint standalone installation where we used to purchase dedicated server per client and installed sql, SharePoint foundation 2010 as standalone installation and adding the client
    related version of the code to the solution repository. Later host on the site which is created for that client purpose. This process is same for all the clients where we purchase individual server for each client .
        Now we want to host our product in farm environment of sharepoint foundation 2010 where we are going to try 3 level architecture. 
    • SQL Server-In this sever we are going to install sql server 2008R2 standard edition. Which should serve the database service for all the web applications/sitecollections which we are going to create in Web front end server.
    • Application server- In this server we are going to install the sharepoint as farm and will install search server express for serving search functionality for our product
    • Web front end server- In this server we are going to add this server to Sharepoint farm which we have created in application server. Here we are going to create web applications and site collections for all the clients.
    In this scenario how to manage multiple versions of same wsp solution?
    Another major issue w.r.t the architecture of the product and new approach for client deployment as follow.We have CSS, jquery files for serving the functionality.These files have been mapped to 14 hive folder.If any changes we do one of the jquery file or
    css file which is meant for latest version and not for old version, then how to manage this new functionality for that particular css or jquery file in 14 hive folder, since there is only one 14 hive folder. What is the best practice to make this happen? Another
    thing is, how to manage dll files for individual client?

    It sounds like you have a farm scoped solution at work. In that case you can only have a single instance of it per farm, you'd have to branch each version so they appear to be seperate solutions entirely (thus ruining your clients upgrade process).
    Bluntly i don't think a single farm can manage all your user environments.

  • How to manage user account and management through AMS

    Hi all,
    I’m in the process of designing a new mobile app that requires user registration, login and password reset. Basically all the standard user self service activities that public apps provide. Imagine Instagram for example.
    We’re already looking at Azure Mobile Services and Facebook, Live, etc. authentication. But I’m a bit unclear on how to best handle manual user registrations. How would you best handle a user who decides that they want to register
    without their social account?
    User table in the custom application DB with user name, password, etc. and custom user management pages for registration, login, password reset
    Azure Active Directory and OAuth same as with facebook, etc. Then build custom user management pages for registration, login, password reset, etc.
    Some other Azure service that I don't know about?
    Something else?
    I noticed there is already another related question here:
    https://social.msdn.microsoft.com/Forums/azure/en-US/ca5527f6-1130-4ebb-b335-2d4d6eda7734/create-new-account-and-reset-password-options-on-aad-signin-page?forum=azuremobile
    The 2 important aims for this app are to require minimal maintenance and support overhead and high security at the same time.
    Thanks,
    Kia

    I am not saying that, but with your question it looks like you want a custom auth.
    Did you saw these article:
    Register your apps to use an Azure Active Directory Account login
    Authenticate your app with Active Directory Authentication Library Single Sign-On
    Sara Silva - Microsoft Visual C# MVP
    My blog |
    My Windows 8 Store Apps Samples |
    More Samples
    Follow me in Twitter @saramgsilva
    My Windows 8 Store Apps:
    Female Pill |
    Galinho (Tic tac Toe) |
    24 |
    My Snake
    My Windows Phone Apps

  • How to manage 2 iPods and 2 libraries with same laptop?

    I have one Windows laptop. I have an iPod and an iTunes library. I store my iTunes tunes/movies/podcasts on an exernal hard drive because there isn't enough space on my laptop. I want to purchase a second iPod for my son and manage his iTunes library in the same way - same laptop, same external hard drive.
    I created a separate library and quickly got confused. Is it possible to have two separate libraries for two separate iPods but use the same laptop and external hard drive? IF possible, how should I do this?

    Click here for options.
    (34261)

  • How to manage rdf schema and instance data in multiple tables?

    Hi,
    I need to store the rdf schema in one table and rdf instance data in another table.
    1. How I can do this?
    2. How to configure the joseki-config.ttl to work for multiple models? Some example will help me to understand the solution.
    3. Is there any possibility to create a single model for multiple tables?
    Please let me know.
    Regards
    Siddu

    Hi,
    For schema data, you can create a model TBOX using Jena Adapter (behind the scenes, application table TBOX_TPL will be created).
    For instance data, you can create a model ABOX using Jena Adapter (behind the scenes, application table ABOX_TPL will be created)
    Data loading can be done in multiple ways. Please see the following document for details.
    http://download.oracle.com/docs/cd/E18283_01/appdev.112/e11828/sem_jena.htm
    Your joseki configuration can be something like
    oracle:defaultModel [ oracle:firstModel "ABOX"; oracle:modelName "TBOX"; oracle:rulebaseName "OWLPRIME"; oracle:useVM "TRUE" ] .
    Hope it helps,
    Zhe

  • Hi i forgot my sercurity questions and apple sent me the answers on a email that doesnt work any more so how can i change that and send it to another email

    i dont know my sercurity questions and apple sent me the ansers to a email that no longer works so how can i change it to the right wmail and get my answers.

    How to reset your Apple ID security questions.
    Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
    Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
    Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'.  This will generate an automated e-mail that will allow you to reset your security questions.
    If that doesn't work, or  there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
    Next, go to https://getsupport.apple.com
    (If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
    Choose 'More Products & Services', then 'Apple ID'.
    A new page will open.
    Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
    Click the blue 'Continue' button.
    Select the contact option that suits your needs best.
    Make sure to tell Apple Support to include an alternate email address for the iForgot email, other than your inactive one.  Then, log into appleid.apple.com, and change your primary and rescue email addresses to ones that you can actually access.

  • HT5624 I have an expired email account linked to icloud and don't know the password and can't reset the password due to not receiving emails anymore with the email account. Any ideas on how to retrieve the songs and data?

    I have an icloud account linked to an email address that is no longer in service.  I do not have the password for the account and am trying to retrieve the songs and data from the cloud to use on new apple device.  Any way to get a new password, able to open the expired account, without having that email account active?

    Hi there clarethasimmons,
    You may find the information in the article below helpful.
    Apple ID: Changing your Apple ID
    http://support.apple.com/kb/ht5621
    -Griff W.

  • After the most recent firefox update I can no longer copy and paste. the fuinction only works in Windows and I HATE usign it. Any suggestions on how to restore the copy and paste function while using Mozilla?

    I have been unable to use the copy and past command while using mozilla. the fucntion does work in windows IE, but I don't want to use windows. How do I restore or fix this function? I varies, works some days and not others.

    See http://kb.mozillazine.org/Clipboard_not_working
    Try to use the keyboard if the buttons on the web page aren't working.
    * Copy: Ctrl+C or Ctrl+Insert
    * Paste: Ctrl+V or Shift+Insert
    * Cut: Ctrl+X or Shift+Delete

Maybe you are looking for