Any way to create a simple report selection menu for end user?

Hello. We purchased two full versions of Crystal Reports 2008, version 12.3.1.684. One copy is for me, where I create reports and the second copy is for an end user who runs them. I would like to create a basic menu so when he starts his copy of Crystal Reports it will open with this simple report menu. Is there a way to do this?

I would suggest you invest in small viewer tools for your user. The viewers can house the reports you create and your user can view them without accidently affecting the design structure of your report. With some viewers, you can even customize the report menu. You can begin with this website:
[http://www.kenhamady.com/bookmarks.html]
I hope this helps,
Regards,
Zack H.

Similar Messages

Is there any way to edit the standard Firefox context menu for displayed Web pages?

Is there any way to edit the standard Firefox context menu for displayed Web pages? I frequently want to save a picture appearing on a page. Sometimes I "slip" and hit "Send Image" when I want "Save Image As", and have to sit and wait for a default send-mail page to come up, then close it, fiddling with its "are you sure" dialogs. This is a painful way to handle a slip-up. I basically NEVER want to e-mail an element directly from a page. Is there any way I can just delete "Send Image" from the context menu?

You can remove entries in the context menu with code in the userChrome.css file
*http://kb.mozillazine.org/userChrome.css
Some IDs are listed in this MozillaZine Knowledge Base article:
*http://kb.mozillazine.org/Chrome_element_names_and_IDs
To find the ID of others you will have to use the DOM Inspector.
* https://support.mozilla.org/kb/DOM+Inspector
* https://developer.mozilla.org/En/DOM_Inspector
* https://developer.mozilla.org/en/Introduction_to_DOM_Inspector
* DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/

Automated reporting on dataloads for end-users

Dear forumers,
we are on BI 70
we are looking for a way to provide our endusers with a report/query, whichs shows the status of dataloads in each cube.
On forums I have found some tips on using the table RSREQDONE. Based on requests in this table, one should be able to provide a list with the number of records, start/stop times. When you create an infoSetQuery on this, it can give you some data.
But we load based on Process Chains, and we want to show the success or failure of each process chain, and show the date/time when this was completed. And we use DTP's for some of our loads, so no InfoPackages overall.
BTW: the technical status in a query on a multiProvider is not very helpfull, as this only shows the oldest data load from all underlying infoproviders; when one is a History cube which is updated once in the past, no usefull data here shown...
has someone looked into this as well? does someone have some tips, advice pointers for getting such a end-user usable query on data status?
-Jaap

You can build a query based on cube 0TCT_MC12. This will give you a status per process chain:
green yellow or red.
So in the query you put the process chain, date & the status.

Catalogs and Selected Sets for end user

Hi
When we enter a code in Char. Attribute catalog or a selected set code, the system requires transport request. How can my end user maintain, catalogs and selected sets after go live?

See following steps. You will need BASIS people to set this up. Also check OSS notes as they have some notes on this.
FF
How to make updates to Quality Catalogs not require a transport.
1. In IMG, find the configuration line for the object (EDIT CATALOGS) and just u201Chighlightu201D the object: (like Quality Management> Quality Planning> Basic Data> Catalog> "EDIT CATALOGS"
2. From the EDIT menu, select u201CDisplay IMG Activityu201D.
3. Select the Maint. Objects Tab, then double-click on one of the u201Ccustomizing objectsu201D (in this case V_QPGR_CL).
4. On the resulting screen, make sure the u201Ccurrent settingsu201D check box is checked.
5. Do the same for the other customizing objects listed (in this case V_QPAM_CL).

Is there any way to create BHO.dll (Browser Helper Object) for Mozilla. I have created done this with IE7. I like to migrate this to Mozilla. Please suggest me

I have done a project to capture URL details and based on the data I need to do business process. I have implemented this project in Interner explorer using BHO (Browser Helper Object). I need to migrate this project to Mozilla. Please suggest me.

Firefox doesn't use BHO like IE.
For Firefox (and Google Chrome) you will have to create extensions to add extra features.
*https://developer.mozilla.org/en/Extensions
*https://developer.mozilla.org/en/Building_an_Extension

Is there any way to create discussion board using JSP

Hi! i'm doing a project using jsp is there any way to create a simple discussion board like the one here? can anyone who knows pls forward some links that teaches me how to do it step by step. Thanks for your help and have a nice day :)

From the UK! -- PC Plus, August 2000 Issue:
How to build a JSP Message Board
http://www.pcplus.co.uk/media/pcplus/pdf/166/pcplus.166.progworld.java.pdf
You'll get a nice 2-page pdf file, taken directly from the magazine
--Dave

Is there any way of creating typing shortcuts on iPad Air iOS8? For example typing "wcybl" results in "will call you back later".

IIs there any way of creating typing shortcuts on iPad. For example, "wcybl" when typed could result in "will call you back later"

Follow Japib's directions then enter the shortcut like in the screenshot. Be sure to tap save.

Is there any way to create fields reports users can enter data into?

I am using Crystal XI to develop reports for my company and have not received any formal training on it. I'm learning it fairly well through the help files.
One of the reports I need to create summarizes our scrap, rework, and additional incurred expenses for our monthly quality reports. Most of the information is stored in the main program used by all employees, a very small amount of it is not. I have created sub-reports for each of the different types of costs that are tracked in the system.
Is there any way to create an area on the report that our QA people can use to enter the items not tracked in the main system? I am imagining that it would be through another sub-report of some kind, but do not know how to create the fields needed.
Thank you very much for any assistance you can provide, even if it is to tell me "You can't do that, ma'am..." At least then I would know and wouldn't beat my head against the desk trying to figure out how to do it.

Is defining parameter prompts in the Crystal Report and displaying it in the report a possible workaround?
If you define parameter prompts, then Crystal will query the user before running the report - so this would be problematic if the user needs to reference data in the report to enter appropriate values (one possibility then is to use interactive parameters feature available in CR 2008).
Sincerely,
Ted Ueda

Is there any way to create a style sheet in APEX?

Hi experts,
I am in I am in Oracle Enterprise Manager 11g 11.2.0.1.0.
Is there any way to create a style sheet in APEX any version?
I want to create a style sheet and use APEX report column link to it.
Thanks.
Cow

Well, if that is the case, then you'll need to do some PL/SQL programming to write a package to create all of that for you, then execute the package when the 'link' column is clicked.
After your package is written, change the attributes on your link column to be a URL instead of page in your application and call it like:
javascript:{MypopUp2('http://your.server.name/print/owner.package_name.sub_procedure?key=#COL01#',800,600);}
On my system, I created a new DAD and user just for this one purpose, to read an select the information in my report, generate the HTML to display the data, etc. without leaving a loophole someone could exploit to get direct data manipulation access. My report though is a form-type report of all the data from about 40 tables for that one 'master' record, with css formatting included. I'm not directly generating a css file based upon data within the database, but simply adding the css formatting into the HTML file my package generates.
Does this help your problem?
Bill Ferguson

Is there any way to create a transcript document of the audio within a course?

I have a course that someone else created that contains audio and would like to know if there is any way to create a "storyboard" of the audio so the SMEs can edit it instead of sending an EXE file for review or having to recreate the transcrip from scratch.

I generally just have the transcript for my voiceover audio in the Slide Notes field for each slide, and then output my project to a Word document handout, making sure to select the option for slide objects and slide notes. That creates a PPT-like handout that is easy to email to approvers. They can see the transcript notes underneath each slide graphic.

Is there a way to create SQL Dev reports with validated binds?

Is there a way to create SQL Dev reports with validated binds similar to the way user defined extensions can have <prompts> with a <value> that is a SQL statement returning a list of possible values?
This sure would make select appropriate values for binds in reports easier and less error prone.

Maybe a forum search on "Windows registry" would turn up some useful things. You're not the first to ask this. You might save yourself and everyone else some time if you'd simply do that.

Is there any way to create 3D PDF file without having the model tree ?

Is there any way to create 3D PDF file without having the model tree ?
3D communication is good but sometime we don't want the receiver to be able to study every components in model.
or any way to make the receiver cannot use model tree and measurement tool ????
Thank you very much

You can remove the assembly tree by doing a roundtrip in 3D Toolkit, here's how:
- start Acrobat 3D
- drag & drop a CAD file
- click on 3D Annot to activate
- right-click on 3D
- select 'Edit in 3D Toolkit'
- 3D Toolkit launches
- click in 'Scene Tree' panel
- right-click on top assembly name
- select 'Tools->Collapse Hierarchy'
- select 'File->Save'
- select 'File->Exit'

Is there any way to create a file compatible with Premiere Pro

Is there any way to create a file in Premiere elements that is compatible with Premiere Pro and that can be used in Premiere Pro

Consternation
The important information that I do not see mentioned nor offered by you.
1.What version of Premiere Elements are you using and on what computer operating system it is running? What version of Premiere Pro do you want to use?
The Premiere Pro Import Supported Formats seem to indicate that it will accept the Premiere Elements project.prel (project file) on Windows Only.
Adobe Premiere Pro Help | Supported file formats
This may or may not be possible depending on damaged projects or outdated elements.
2. If you want to export your Premiere Elements Timeline to a file saved to the computer hard drive and subsequently import that into your Premiere Pro version, that "should" work. You would go to the Premiere Elements Publish+Share/Computer/ and make a selection based on what the Premiere Pro Import Supported file formats are and what you need. I can help you with that. But, details first.
But, just a "beware"...when you get to Premiere Elements 11 or 12 (if that is the version involved) Publish+Share/Computer/ there are several categories, but all you see is Adobe Flash Video, MPEG, and AVCHD. The rest of the list that includes AVI and QuickTime which both need to be scrolled to all of the time to see them, not just sometimes, with the thin scroll bar to the right of the list of choices. You can export files
with AVI file extension, under Publish+Share/Computer/AVI
with MOV file extension, under Publish + Share/Computer/QuickTime
And, if you do not have QuickTime installed on your computer with Premiere Elements, you are not going to have presets for the QuickTime export.
Remember, there is more to an export than just its file extension. Know your other export properties as well.
In many cases, you can customize the export settings to suit your requirements.
Problems will exist if you are trying to go from Premiere Elements Windows to Premiere Pro Mac or vice versa.
I would be glad for the opportunity to help you with this issue, but details are needed.
Looking forward to your follow up.
Thanks.
ATR

Is there any way to create backing bean, After page gets created?

Hi
Any one can please answer to my quick question !!!
Is there any way to create the backing bean ,after a jsf page gets created using ADF ..?
When i first time created the jsf jppx page i unchecked the option to generate backing bean, but later some time I would like to have backing bean for the newly created page. so is there any way to create backing bean ...?
Thanks in Advance

Have your page in the visual design mode then go to the Design->Page Properties menu and you'll be able to select auto-bind on the second tab.

Is there any way to create a HTTP_AAE Receiver without a path in NW PO 7.31

Hi ,
Does anyone know how to create a HTTP_AAE Receiver without a path??
We are in a phase of migrating Interfaces from PI 7.1 to PO 7.31(Java Only).
For one of the Interface in PI 7.1 there is a RFC Destination for vendor communication through HTTPS connectivity :
TargetHost: IP Address
Post: value
Path Prefix: Blank
During migration requirment is to keep the Path field BLANK of the Communication Channel,however since PO has mandatory path field a "/" is been provided, because of which data post fails.
PI: https://IP:9443
PO: https://IP:9443/ (Since Path Prefix is mandatory)
As per my understanding The data is supposted to be posted directly to the IP (https://IP:9443) however it is getting posted to (https://IP:9443/) where the service is not available. For Reference attached relevant screenshots.
Is there any way to create a HTTP_AAE Receiver without a path. Need ardent support and suggestions
regarding this.
Regards
Riju

Hi,
For Service auto- PO from PR, you need to activate Automatic Purchase order creation for Service requisitions in ML91 t.code.
Note:
For material :automatic PO creation from PR, follow the steps.
1) Material Master purchasing view tick automatic PO check box
2) Vendor Master purchasing view tick automatic PO check box.
3) Maintain Source list for Vendor & Material.(ME01)
4) Maintain Purchase Info Record.(ME11)
5) Create a Purchase Requisition.(ME51)
6) Use T.Code: ME59 & execute for PR for vendor, you will be able to create automatic PO.
During creation of PR , select check box of Source Determination in the 1st screen of ME51
Ensure that Purchase Info Record should be there.
If you have more than one vendor then fixes only one vendor in source list.
Regards,
Biju K

Any way to create a simple report selection menu for end user?

Similar Messages

Maybe you are looking for