Any ways to roll over to a different log file when the current log file big
How to roll over a log file when it reaches maximum to a different log file?
any ways of doing this??????
More info in the new owners....
http://www.oracle.com/technology/pub/articles/hunter_logging.html
And more!!!!! here to build a configuration file with filehandler properly setted to an specified size
http://www.linuxtopia.org/online_books/programming_books/thinking_in_java/TIJ317_021.htm
Similar Messages
-
Is there any way to switch between using two different phones?
I know when phones have SIM cards (like with ATT), you can use two different phones by simply moving the SIM card from one phone to the other and ATT is none the wiser.
Is there any way to do that sort of thing with Verizon?
I currently have an iPhone 5 but would like to start playing around with Android (I'm a gadget nut). So, assuming I find an unlocked Android phone, is there any way to bounce back and forth between using different phones (obviously only one at a time)?Michael_F wrote:
So, the SIM card contains all the info necessary for the new phone to ring when called, etc?
yes, assuming the phones use the same size SIM card (otherwise, you'll need an adapter or a new SIM card; the cards are free at your local Corporate Verizon store).
4G SIM Information | Verizon Wireless -
Any way to pass Multiple Values for a single Label in the Parameter?
I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter.
PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
QUESTION:
Any way to pass Multiple Values for a single Label in the Parameter?
I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
it correct.
I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
Note: We are using Report Builder 3.0Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
Try creating either a function or stored procedure using the code below (compliments to
http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string:
CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
BEGIN
DECLARE @SeparatorPosition INT
DECLARE @ArrayValue VARCHAR(1000)
SET @Array = @Array + @Separator
WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
BEGIN
SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
END
RETURN
END
Once created you can do things like this:
SELECT * FROM Parse('John,Bill,David,Thomas', ',')
SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
This is what your SQL query would probably look like:
SELECT OperationID, OperationName FROM dbo.Operations
WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value. -
Is there any way to an index that can be used to include the "OR condition "?
Hello I have some questions.
The test was conducted in the following procedure .
create table test
c1 varchar2(10),
c2 varchar2(10),
primary key(c1)
create index test_idx1 on test(c2);
Command> explain select * from test where c1 = 'AAAAAAAAAA' or c2 = 'AAAAAAAAAA';
Query Optimizer Plan:
STEP: 1
LEVEL: 1
OPERATION: RowLkRangeScan
TBLNAME: TEST
IXNAME: TEST
INDEXED CONDITION: <NULL>
NOT INDEXED: TEST.C2 = 'AAAAAAAAAA' OR TEST.C1 = 'AAAAAAAAAA'
Command>
Command> explain select * from test where c1 = 'AAAAAAAAAA' and c2 = 'AAAAAAAAAA'
Query Optimizer Plan:
STEP: 1
LEVEL: 1
OPERATION: RowLkRangeScan
TBLNAME: TEST
IXNAME: TEST
INDEXED CONDITION: TEST.C1 = 'AAAAAAAAAA'
NOT INDEXED: TEST.C2 = 'AAAAAAAAAA'
Command>
By including the "OR condition " in this test does not use the index.
Is there any way to an index that can be used to include the "OR condition "?
Thanks.
GooGyum.A database cannot in general use indexes in this way for an 'or' involving two different columns. However, for this specific example one can easily rewrite the query using 'UNION' to use the relevant indexes while still giving the same (correct) result:
Command> explain select * from test t1 where t1.c1 = 'AAAAAAAAAA' union select * from test t2 where t2.c2 = 'AAAAAAAAAA';
Query Optimizer Plan:
STEP: 1
LEVEL: 1
OPERATION: RowLkRangeScan
TBLNAME: TEST
IXNAME: TEST
INDEXED CONDITION: T1.C1 = 'AAAAAAAAAA'
NOT INDEXED: <NULL>
STEP: 2
LEVEL: 2
OPERATION: RowLkRangeScan
TBLNAME: TEST
IXNAME: TEST_IDX2
INDEXED CONDITION: T2.C2 = 'AAAAAAAAAA'
NOT INDEXED: <NULL>
STEP: 3
LEVEL: 1
OPERATION: OrderBy
TBLNAME: <NULL>
IXNAME: <NULL>
INDEXED CONDITION: <NULL>
NOT INDEXED: <NULL>
STEP: 4
LEVEL: 2
OPERATION: UnionMergeSort
TBLNAME: <NULL>
IXNAME: <NULL>
INDEXED CONDITION: <NULL>
NOT INDEXED: <NULL>
Maybe you can apply a similar trick? If you know there is no possibility of duplicate rows then you can further optimise this (in terms of performance) by using UNION ALL.
Chris -
In addition to the FormsCentral subscription charge ($152.87 including tax) I was billed about the same time for $15.93. I can't find any way to get in touch with anyone from Adobe. The phone number I'm supposed to call is cut off on my invoice. Can someone respond ASAP? Thanks
I have forwarded your request to the support team that should be able to resolve this issue for you quickly. Expect to hear from them shortly.
Andrew -
Is there any way we can set default value for a Date Attribute to current date in Master Data Services.
I as well wants to know that is there any posibility to show Calendar control while input data into respective date attributes.
Thanks.Hi Anagha,
So far i havent found any way to set todays date by default from MMI, but i guess this flow should work as workaroud
1. Add buisness rule which can set a default value when Date = NULL/Blank
2.get the entity table ,use -select EntityTable from mdm.tblEntity where Name = '<enter entity name>'
3.Go to that table and add a after update trigger like
if uda_<entityid>_<attributeid(Date attribute)> = default value
update uda_<entityid>_<attributeid(Date attribute)> =getdate() where id = <LastUpdatedRow>
I will check on this too from my side.
By the way AFAIK i dont think so calendar control integration is possible . -
I accidently cleared the push notifications on my i pad and now i want to see them back.is there any way to see them,because i have to see all the application what the notifications was for.it takes a lot of time.i am isking this to save my time in future
I found one other way to do it. I just deleted them all out of my iTunes library. Now I can re-import them from Window's My Music file with the original artists' names intact.
Thanks for your help, Matt! -
Is there any way for my phone NOT to be on silent on the lock screen?
Is there any way for my phone NOT to be on silent on the lock screen?
Make sure the Mute switch isn't enabled. If you see orange, it's in silent mode.
-
I use firefox - Is there any way to make it so my internet browser only remembers the MAIN site? -- EG: Only Youtube.co.uk instead of Youtube.co.uk/VIDEO ect.ect. WHISPER PLEASE
Is this to reduce the clutter of suggestions on the address bar, or for some other reason?
You can change the address bar drop-down so it only suggest bookmarked sites instead of everything in your history. This article describes how to make that change: [[Awesome Bar - Find your bookmarks, history and tabs when you type in the address bar]] (see the section "How can I control what results the location bar shows me?").
Am I on the right track?
(I'm avoiding the really hard question of how to selectively cull your history. I can't think of a way to do that.) -
Is there any way to sync my lotus notes calendar and contacts with the calendar and contacts on my MacBook Pro?
You would need to have enabled iCloud on your MBP. Your question indicated you did not.
Its serial number is useful for establishing ownership should the MBP be recovered. File a police report. -
Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ -
Hi! I need help, today I connected my mac Book Air to a tv for a presentation and as soon as I conected it the image on my screen went bigger. And I cant find the way to put it back as it was before. The Images are too big! heelp
Morning DeeHutton,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Best of luck,
Mario -
While working in Firefox is there a way to open a new window with one site when the home setting on Firefox has multiple websites?
I guess I'm not explaining myself fully. I have a home page designation in firefox preferences that starts firefox up with 5 sites. that pretty fills up my screen with tabs.
At some point I want to initiate another WINDOW in firefox (NOT a tab). I would like to be able to open up a window that ONLY has ONE tab, or as if there were only one site designated as the home page. This gives me a workspace that has my most useful sites available in tabs in one window, and also another WINDOW that I can move around in and even create more tabs without messing up my primary set of TABS (in my primary window). I see how this might not be doable without doing what I do now, which is open up a new window, and then close tabs until the new window just has one tab for me to work from. -
I loaded microsoft office on my mac airbook. I have no problem accessing it from my user. When the other log on user is clicked the software icons are not avauilable. How do I have any user on my airbook have access ? . i.e. my wife
Greetings Niel
I was able to copy down the Word, Excel and PowerPoint icons and access "however" when I exit out of the guest user it deletes them from the tool tray at the bottom.... I need them to stay there not have to copy them down..
Can you still assist? -
Any way to roll back to 10.9.0 from 10.9.1?
the 10.9.1 and restart is prompting for all sorts for keychain passwords (some of which I evidently don't remember). Is there any way to get out of this Groundhog Day loop? Restarting just starts the prompting process (and beachball) all over again. And the dialog box can't be closed/minimized. Any help appreciated.
Perhaps this will help you:
Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com.
Maybe you are looking for
-
Help to improve the performance of a procedure.
Hello everybody, First to introduce myself. My name is Ivan and I recently started learning SQL and PL/SQL. So don't go hard on me. :) Now let's jump to the problem. What we have there is a table (big one, but we'll need only a few fields) with some
-
Anybody know an HD video camera whose format IS recognised by the iPad 3 using iMovie?
-
Change screen resolution message when trying to start media manager
I use a UMPC (Samsung Q1UP) that only has a screen resoluion opion of 1024 x 600 as it is a 7" landscape mobile computer. When I start up the blackberry software, and then try to launch Media Manager etc., it gives me an error message to change the s
-
Hi, Since I have Leopard my screen-resolution always resize after my pc is coming back from the screensaver or hibernate-mode. Also when I afterwards go to the screen properties my default screen-resolution (1440x900) is not listed and I have to dete
-
Illustrator CC - Path Length Stats
Does anyone know if there is an alternative to the Path Length and Path Area plug-ins for Adobe Illustrator from Telegraphics? I used these plug-ins in older versions of Illustrator. They're extremely useful in sign design. I could get statistics lik