Anybody can give some example about XA programming?

 

Yu Li,
This is not the correct forum for XA questions, however, search on 'XA' across the otn site and you will find some examples.
regards,
David

Similar Messages

  • Anybody can give me an example about net procedure & gross procedure??

    dear SAP consultant,
    are there anybody can give an example about transaction with net procedure or gross procedure for tax calculation..
    so far this is my mind set..
    net procedure transaction
    revenue    1000
    discount       50
    tax              100
    gross procedure
    revenue     1000
    discount        50
    tax              950
    which one is true??or both of them totaly wrong??
    need your help
    Warm regard,
    Land Lord

    Hi,
    Gross tax on sales/ purchases
    In this procedure, the system posts taxes to the expenditure or revenue account assignment. The lines for sales/purchase tax are distributed proportionally to the FM account assignment elements (for example, commitment item, funds center and fund) of other relevant lines.                                                           
    ·        Separate tax on sales/purchases
    In this procedure, the system posts the taxes in Funds Management to a separate commitment item. The lines for sales/purchase tax are distributed proportionally to the FM account assignment elements (for example, funds center and fund) of the relevant lines. The tax commitment item is derived, for example, from the tax account.
    ·        Net tax on sales/purchases
    The tax is updated to a separate commitment item as it is in the separate tax update, provided that the tax account is assigned to a statistical commitment item with financial transaction 30. Otherwise, no update is carried out.
    Thaks
    Prasada

  • Does anybody can give me a simple example about the labview programme calling dll ?

      Does anybody can give me a simple example about the labview programme calling dll ?And the dll is also writed  by using labview .I just want to study  the process of the labview programme calling dll file.Thank you!

    Hi,
    Please click on "Find Examples" in the "Getting Started Window"
     A window named "NI Example Finder" will pop up.
     In this go to "Search" tab
    Type "DLLs"
    You will see a lot of examples. 
    If you're online, you'll see user examples too...

  • What is IMPORT/EXORT statements ?please give some example code?

    What is IMPORT/EXORT statements ?please give some example code?

    EXPORT :-To read data objects from an ABAP program into ABAP memory, use the following statement:
    Syntax
    EXPORT <f1> [FROM <g 1>] <f 2> [FROM <g 2>] ... TO MEMORY ID <key>.
    This statement stores the data objects specified in the list as a cluster in memory. If you do not use the option FROM <f i >, the data object <f i > is saved under its own name. If you use the FROM <g i > option, the data objet <g i > is saved under the name <f i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
    The EXPORT statement always completely overwrites the contents of any existing data cluster with the same name <key>.
    IMPORT :-To read data objects from ABAP memory into an ABAP program, use the following statement:
    Syntax
    IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
    This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
    You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
    they are used to save and reterive data in ABAP memory.
    here is an example to clear about them.
    <b>REPORT ZWA_TEST2 .
    data: it_bkpf type table of bkpf with header line.
    SELECT * FROM bkpf into table it_bkpf.
    EXPORT it_bkpf TO MEMORY ID 'MID'.
    refresh it_bkpf.
    IMPORT it_bkpf FROM MEMORY ID 'MID'.
    LOOP AT It_bkpf.
    write:/ it_bkpf-belnr.
    ENDLOOP.</b>
    Reward points if it is useful.......

  • Pls give some info about userexit

    hi everyone,
    i never did work on userexit before. Could you give some info about how to create userexit and some knowledge related to that. Any suggestion is appreciated.
    Best Regards,
    Julian

    User exits (Function module exits) are exits developed by SAP.
    The exit is implementerd as a call to a functionmodule.
    The code for the function module is writeen by the developer.
    You are not writing the code directly in the function module, but in the include that is implemented in the function module.
    The naming standard of function modules for functionmodule exits is:
    EXIT_<program name><3 digit suffix>
    The call to a functionmodule exit is implemented as:
    CALL CUSTOMER.-FUNCTION <3 digit suffix>
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    CUSTOMER EXITS-> t-code CMOD.
    As of Release 4.6A SAP provides a new enhancement technique, the Business Add-Ins.
    Among others, this enhancement technique has the advantage of
    being based on a multi-level system landscape (SAP, country versions, IS solutions, partner,
    customer, and so on)
    instead of a two-level landscape (SAP, customer) as with the customer exits.
    You can create definitions and implementations of business add-ins at any level of the system landscape.
    You can use below code to find out user exits associated with particular transaction.
    *& Report  ZUSEREXIT                                                   *
    *& Finding the user-exits of a SAP transaction code                    *
    *& Enter the transaction code in which you are looking for the         *
    *& user-exit and it will list you the list of user-exits in the        *
    *& transaction code. Also a drill down is possible which will help you *
    *& to branch to SMOD.                                                  *
    REPORT zuserexit NO STANDARD PAGE HEADING.
    TABLES : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
    TABLES : tstct.
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
    IF sy-subrc EQ 0.
      SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
                       AND object = 'PROG'
                       AND obj_name = tstc-pgmna.
      MOVE : tadir-devclass TO v_devclass.
      IF sy-subrc NE 0.
        SELECT SINGLE * FROM trdir WHERE name = tstc-pgmna.
        IF trdir-subc EQ 'F'.
          SELECT SINGLE * FROM tfdir WHERE pname = tstc-pgmna.
          SELECT SINGLE * FROM enlfdir WHERE funcname = tfdir-funcname.
          SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
                                      AND object = 'FUGR'
                                    AND obj_name EQ enlfdir-area.
          MOVE : tadir-devclass TO v_devclass.
        ENDIF.
      ENDIF.
      SELECT * FROM tadir INTO TABLE jtab
                    WHERE pgmid = 'R3TR'
                     AND object = 'SMOD'
                   AND devclass = v_devclass.
      SELECT SINGLE * FROM tstct WHERE sprsl EQ sy-langu
                                  AND  tcode EQ p_tcode.
      FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
      WRITE:/(19) 'Transaction Code - ',
           20(20) p_tcode,
           45(50) tstct-ttext.
      SKIP.
      IF NOT jtab[] IS INITIAL.
        WRITE:/(95) sy-uline.
        FORMAT COLOR COL_HEADING INTENSIFIED ON.
        WRITE:/1 sy-vline,
               2 'Exit Name',
              21 sy-vline ,
              22 'Description',
              95 sy-vline.
        WRITE:/(95) sy-uline.
        LOOP AT jtab.
          SELECT SINGLE * FROM modsapt
                 WHERE sprsl = sy-langu AND
                        name = jtab-obj_name.
          FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WRITE:/1 sy-vline,
                 2 jtab-obj_name HOTSPOT ON,
                21 sy-vline ,
                22 modsapt-modtext,
                95 sy-vline.
        ENDLOOP.
        WRITE:/(95) sy-uline.
        DESCRIBE TABLE jtab.
        SKIP.
        FORMAT COLOR COL_TOTAL INTENSIFIED ON.
        WRITE:/ 'No of Exits:' , sy-tfill.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(95) 'No User Exit exists'.
      ENDIF.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
    AT LINE-SELECTION.
      GET CURSOR FIELD field1.
      CHECK field1(4) EQ 'JTAB'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST   SCREEN.
    *---End of Program.
    I hope it gives some basic idea.
    Best Regards,
    Vibha
    *Please mark all the helpful answers

  • Find some examples about pthread by objective-c

    hello,
    Now I am studying pthread. But I can't find some examples about pthread by objective-c. The example is pass to bulid and run. Example is twoThread which can communicate each other. I will still find. If you know some useful infomation,would you support some?
    Thank you very much!

    Hi qzxin-
    Several examples of DAQ programming install with Measurement Studio for Visual Studio .NET. DAQmx examples can be found in this folder of your hard drive: C:\Program Files\National Instruments\MeasurementStudioVS2003\VCNET\Examples\DAQmx . For analog measurements, the syntax for adding multiple physical channels to the operation is "DexX/ai0:n" where X is the device number and n is the last channel in the list.
    Can you let us know more about which DAQ device and which version of Measurement Studio you're using? It would make it easier to suggest an example.
    Thanks,
    Tom W
    National Instruments

  • Give some examples of sd tickets

    give some examples of sd tickets, how these are solved?????/

    Check these few ones
    1. Account Assignment of Customer / material not maintained in Customer / Material Master (If maintained in combination in VKOA).
    Solution:
    Option 1 (Standard solution):
    step 1: Cancel Billing Document --> Reverse PGI --> cancel Delivery --> Cancel Sales Order
    step 2: Maintain Customer master / Material Master correctly.
    step 3: Recreate sales Order --> Delivery --> PGI --> Invoicing.
    Option 2:
    Force the Account Assignment Group of Customer / Material through Debug in change mode of Billing document, which will release Billing Document to Accounting.
    2. Account Key not maintained in Pricing Procedure:
    Impact: This may create accounting document, but if condition type, which are to be posted to account, but do not have account key maintained in pricing procedure, it will not be post the relevant condition type to G/L account.
    3. Billing Document not being released to accounting --
    In Material Master, there is some link between Profit Centre & MRP Type. If one of it is not maintained, erratically few documents get stuck while releasing Billing Document to accounting. Few of course get posted.
    Solution1: Cancel Billing Document --> Reverse PGI --> Cancel Delivery --> Block the sales Order & Create new sales Cycle all over again after rectifying Material master.
    Solution 2: (Temporary Solution) In Debug mode in Billing, force the Profit Center in Billing Document with the help of Abaper. But ensure Material master is rectified.
    From FI Side, you require to check that all the G/L account has been maintained through T.Code: FS00. G/L account being Master data has to be created in each client to upload through LSMW / SCATT / BDC.
    In Billing Document in change mode (in the first screen where we enter Billing Document number), on the top most left hand corner, take a dropdown on Billing Document & select Release to accounting. Here you can get the under mentioned possible message:
    1. G/L account not found
    2. Cost Element not maintained for G/L account.
    In both the above cases, FI consultant requires to take corrective action.

  • Anybody can give me hand

    Big headache bother me 3 days, I run the function from SQL
    2005 even just take 0.1s, but when I try to call the function from
    the CF scripts, it loops forever, the server host CF 6.1MX, anybody
    can give me a hint how to solve it?

    Hmm, I'm not sure what to tell you than. The best you can do
    is enable as much debug/logging as possible, and start sniffing
    around on both the CF server and the DB server to identify the
    source of the problem.
    You may need to temporarily add some break points in your
    query, or in the UDF itself to try and narrow down the source of
    the problem.
    Unfortunately this is one of those things that is going to be
    difficult for anyone to remotely diagnose with the little tidbit of
    information that you provided.
    Best of luck with it, and feel free to come back and reply
    again if you think you've discovered some additional info that
    could help point us to the root cause of the issue.

  • Can anybody can give me an apple ID and Password for free app. only. Pleaseee

    Can anybody can give me an apple ID and Password for free app. only. Pleaseee

    http://support.apple.com/kb/ht2534
    Create an Apple ID as above.

  • HT201442 I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

    I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

    Error 3194:
    This device isn't eligible for the requested build
    It means that Apple has stopped signing the version of iOS that you have, try downloading the latest iOS version, then try Restore again.

  • Can give me examples and explantions on Using COPY and NOCOPY in pl-sql

    Can give me examples and explantions on Using COPY and NOCOPY in pl-sql

    If you use COPY then parameter is copied into procedure/function internal
    spae, so You can't modify parameter.
    If you use NOCOPY then parameter is not copied into procedure/function
    internal spae, so You can modify parameter.NOCOPY modifier serves the same purpose as "copy by value" and "copy by reference" concept (like in C++).
    Then you NOCOPY parameter you pass it's pointer in memory but not pass it's value into the stack.
    You can modify the value of this parameter in both cases. The essential difference is for NOCOPY not only the pointer copies much faster then the object itself but the semantic of exception processing is voilated because when the exception raises Oracle can't restore the initial state of parameter (because all changes where made using the memory pointer but not usual stack copie of parameter):
    SQL> create or replace package my_pkg
      2  is
      3   type t is table of number index by binary_integer;
      4   t1 t;
      5   procedure no_copy (a in out nocopy t);
      6   procedure with_copy(a in out t);
      7  end;
      8  /
    Package created.
    SQL> create or replace package body my_pkg
      2  is
      3 
      4   my_exc exception;
      5 
      6   procedure no_copy (a in out nocopy t)
      7   is
      8   begin
      9    for j in 1..10 loop
    10     a(j) := 1;
    11    end loop;
    12    raise my_exc;
    13   end;
    14 
    15   procedure with_copy (a in out t)
    16   is
    17   begin
    18    for j in 1..10 loop
    19     a(j) := 1;
    20    end loop;
    21    raise my_exc;
    22   end;
    23  
    24  end;
    25  /
    Package body created.
    SQL> declare
      2    t1 my_pkg.t;
      3  begin
      4    dbms_output.put_line('Count before ' || t1.count);
      5    begin
      6      my_pkg.no_copy(t1);
      7    exception
      8      when others then
      9        null;
    10    end;
    11    dbms_output.put_line('Count after ' || t1.count);
    12  end;
    13  /
    Count before 0
    Count after 10
    PL/SQL procedure successfully completed.
    SQL> declare
      2    t1 my_pkg.t;
      3  begin
      4    dbms_output.put_line('Count before ' || t1.count);
      5    begin
      6      my_pkg.with_copy(t1);
      7    exception
      8      when others then
      9        null;
    10    end;
    11    dbms_output.put_line('Count after ' || t1.count);
    12  end;
    13  /
    Count before 0
    Count after 0
    PL/SQL procedure successfully completed.Rgds.

  • 4.give some  examples of collaborations from the Collaboration Launch Pad.

    give some  examples of collaborations from the Collaboration Launch Pad.

    Answered my own question:
    Here it is:
    1. Logon to portal as Administrator
    2. Navigate to Content Administrator -> Portal Content
    3. Open the tree 'Portal Content'
    4. Open the tree 'Content Provided by SAP'
    5. Open the tree 'End User Content'
    6. Open the tree 'Standard Portal user'
    7. Open the Object 'Default Framework Page'
    8. Open the Properties of 'Tool Area'
    9. Select the 'Property Category' as 'Select all'
    10. Set the property 'Enable Collaboration Launch Pad' to "Yes"
    11. Set the property 'Enable Real-Time Collaboration' to "Yes"
    12 Restart the portal (If you are not getting Collaboration Launch Pad).

  • Give some example of sap sd tickets

    Dear Sir,
                 pls give some examples of sap sd tickets & also explain how to solve ticket issues..
    With Regards
    Prasanta

    hi,
    pl check this link where i have recently posted one ticket :
    [ticket|Re: urgent...................hi alll tickets]
    and try to make a search in this forum, you might get more.
    regards
    sadhu kishore

  • Give some idea about sql tracer

    hi ,
    guru.
    please give some idea about exactly what is the use of sql tracer.
    thank u.
    subha

    Hi,
    Worth to click below links,
    http://help.sap.com/saphelp_erp2005/helpdata/en/d1/801f89454211d189710000e8322d00/content.htm
    Re: Runtime Analysis vs SQL Trace
    http://www.sapbrain.com/TOOLS/SQLTRACE/SQL_TRACE.html
    Urgent : How to do the SQL trace analysis
    http://www.sapdevelopment.co.uk/perform/perform_sqltrace.htm
    Regards,
    Suresh

  • What is process in oracle give some examples

    what is process in oracle give some examples

    The tem "process" has multiple meaning in Oracle but most likely you probably are referring to the Oracle background process used to perform the work for an Oracle session.  These are in fact OS processes spawed by Oracle using fork on UNIX/Linux and would be task thread on Windows.  You can find infomraion on these proceses via the v$process view.  You join v$process to v$session to see the front and backend processes for a connection to Oracle.
    The Concpts manual describes Oracle process Architecture:
    http://docs.oracle.com/cd/E11882_01/server.112/e40540/process.htm#CNCPT008
    HTH -- Mark D Powell --

Maybe you are looking for