Anybody had used Microsoft NLB to LoadBalance LDAP traffic?

Hi all.
I got some lines from a Microsoft spoker and he says that the NLB (Microsoft Network Load Balancing Manager) could balance LDAP traffic.
I'm trying to find a way to do this without a hardware load balancer.
Anybody has any experience on this field?
Thanks.

Paolo,
I really thought you were using the IGMP option because of your statement:
"2) Other hosts in the same VLAN do not receive any broadcast related to this cluster (multicast is working)"
Without the IGMP option, NLB uses a locally administered Multicast MAC address with the format 03:BF:<IP-Address-of-the-Cluster>. Thus this is not an IANA-assingend multicast MAC address (01-00-5E), IGMP snopping cannot avoid the flooding of those frames throughout the entire VLAN, which is the only way a switch can handle such frames. The recommendation for avoiding/containing this flooding is the configuration of static MAC entries for the multicast Cluster MAC (binding it exclusively to the required ports). Those static entries then also will be listed in the "show mac address-table" output.
With the IGMP option, you can make use of IGMP snooping in order to avoid the flooding, so static MAC entries are not required in this case and the multicast cluster MAC can be learned dynamically by IGMP snooping. It should then be listed in the "show mac address-table multicast" output.
HTH
Rolf

Similar Messages

Using Microsoft Network Load Balancing for Livecycle ES 2/2.5 with JBoss clustering?

Hi,
Has anyone tried using Microsoft NLB for Livecycle with JBoss clustering and get it working? Able to login to livecycle's admin ui page with the NLB IP
My enviroment:
- 2 jboss application server (different IP address)
- Horizontal clustered
- LC ES2 installed on both servers
For those who setup successfully, hope you can share your experience.
Thank you.

Thanks!
Just a few more questions...hehehe
In the document: Configuring LiveCycle ES2 Application Server Clusters Using JBoss.
Page 35 item 3.4. Have you had to configure the Caching Locators? If yes, where did you put them, in only one machine or in all of the nodes?
On page 29, iten 2.7 (Testing the JBoss Application Server cluster) says that for testing we can run the command specifying the server, in my case is:
run.bat -c lc_sqlserver_cl -b <ipAddress>
But in the Appendix C: Configuring JBoss as a Windows Service, it says: call run.bat -c all -b <ipAddress>
So when should I start JBoss with "lc_sqlserver_cl" or "all" ?

Microsoft NLB and Cisco 4500 VSS

Hi,
I have a pair of Cisco 4507 switches in VSS mode. An server (10.4.1.166) using Microsoft NLB MAC address (03bf.0a04.01a6) is connected to VSS Node 1 on port Gi1/6/43. The following is configured on the switch.
arp 10.4.1.166 03bf.0a04.01a6 ARPA
mac address-table static 03bf.0a04.01a6 vlan 31 interface Gi1/6/43
The second command appears differently in running-config but looks good in mac-address-table:
# show running-config | inc mac address
mac address-table static 03bf.0a04.01a6 vlan 31 interface Gi6/43
# show mac address static | inc 01a6
31 03bf.0a04.01a6 static Gi1/6/43
Now, from a PC I can ping the VIP address 10.4.1.166 when connected to VSS Node 1 or any other switch connecting to VSS Node1. If the PC attachment is to VSS Node 2 directly or indirectly, then the ping times out. Doing the same for all the rest of servers not using Microsoft NLB but connected to Node 1 only, is successful from anywhere.
Why is the traffic not traversing the the VSL link i.e. PC -> VSS Node 2 -> VSL -> VSS Node1 -> Server.
Thanks,
Rick.

Thanks Reza, Please find the output of the commands below. The VSS switch looks to be good and working for all other services.
#show switch virtualExecuting the command on VSS member switch role = VSS Active, id = 1Switch mode : Virtual SwitchVirtual switch domain number : 1Local switch number : 1Local switch operational role: Virtual Switch ActivePeer switch number : 2Peer switch operational role : Virtual Switch StandbyExecuting the command on VSS member switch role = VSS Standby, id = 2Switch mode : Virtual SwitchVirtual switch domain number : 1Local switch number : 2Local switch operational role: Virtual Switch StandbyPeer switch number : 1Peer switch operational role : Virtual Switch Active# show switch virtual redundancyExecuting the command on VSS member switch role = VSS Active, id = 1 My Switch Id = 1 Peer Switch Id = 2 Last switchover reason = none Configured Redundancy Mode = Stateful Switchover Operating Redundancy Mode = Stateful SwitchoverSwitch 1 Slot 3 Processor Information :----------------------------------------------- Current Software state = ACTIVE Image Version = Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 15.1(2)SG, RELEASE SOFTWARE (fc3)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2012 by Cisco Systems, Inc.Compiled Wed 05-Dec-12 04:38 by prod_rel_team BOOT = bootflash:cat4500e-universalk9.SPA.03.04.00.SG.151-2.SG.bin,1; Configuration register = 0x102 Fabric State = ACTIVE Control Plane State = ACTIVESwitch 2 Slot 3 Processor Information :----------------------------------------------- Current Software state = STANDBY HOT (switchover target) Image Version = Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 15.1(2)SG, RELEASE SOFTWARE (fc3)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2012 by Cisco Systems, Inc.Compiled Wed 05-Dec-12 04:38 by pro BOOT = bootflash:cat4500e-universalk9.SPA.03.04.00.SG.151-2.SG.bin,1; Configuration register = 0x102 Fabric State = ACTIVE Control Plane State = STANDBYExecuting the command on VSS member switch role = VSS Standby, id = 2show virtual switch redundancy is not supported on the standbySKR_4507_01#show switch virtual link port-channelExecuting the command on VSS member switch role = VSS Active, id = 1Flags: D - down P - bundled in port-channel I - stand-alone s - suspended H - Hot-standby (LACP only) R - Layer3 S - Layer2 U - in use N - not in use, no aggregation f - failed to allocate aggregator M - not in use, no aggregation due to minimum links not met m - not in use, port not aggregated due to minimum links not met u - unsuitable for bundling d - default port w - waiting to be aggregatedGroup Port-channel Protocol Ports------+-------------+-----------+-------------------15 Po15(SU) - Te1/3/1(P) Te1/4/1(P)16 Po16(SU) - Te2/3/1(P) Te2/4/1(P)Executing the command on VSS member switch role = VSS Standby, id = 2Flags: D - down P - bundled in port-channel I - stand-alone s - suspended H - Hot-standby (LACP only) R - Layer3 S - Layer2 U - in use N - not in use, no aggregation f - failed to allocate aggregator M - not in use, no aggregation due to minimum links not met m - not in use, port not aggregated due to minimum links not met u - unsuitable for bundling d - default port w - waiting to be aggregatedGroup Port-channel Protocol Ports------+-------------+-----------+-------------------15 Po15(SU) - Te1/3/1(P) Te1/4/1(P)16 Po16(SU) - Te2/3/1(P) Te2/4/1(P)#show run int gi1/6/43interface GigabitEthernet1/6/43 switchport access vlan 31 switchport mode access spanning-tree portfast spanning-tree guard root
Regards,
Rick.

'authentication failed' using Microsoft ADSI version LDAP server

Hi All,
Now days i am facing some problem in authentication (i am using microsoft ADSI version LDAP Server) but am not able to authenticate the LDAP users.
I have configured my LDAP server in the same manner as u mentioned in this blog.
when I am trying to authenticate the user from the RPD itself i m gettig the following error:
“authentication failed” (actually i forgot the exact message but it mean is same as i referred here)
though i am able authenticate the bind user ( which i used to configure the LDAP Server)
Please help me in this as i already wasted a lot of time in doing R&D to make it work..
I have an urgent requirement to do the same..
Your help will highly appreciated…
thanks in advance
PS: I have checked the 'ADSI' box in advance tab:

Hi,
Please have a look at the below link:
Unknown certificate error when testing LDAP SSL connection
Not sure whether it will help you. But have a look at it.
Regards,
Jithin

HT201250 HAD MY MICROSOFT OFFICE 2011 loose a bunch of its add ons and plugins when i used a mac keeper software how do i get it back

HAD MY MICROSOFT OFFICE 2011 loose a bunch of its add ons and plugins when i used a mac keeper software how do i get it back

MacKeeper, being poorly written, acts like highly invasive malware* that can de-stablize your operating system. It is also unethically marketed and a rip-off, offering nothing that is not available for free.. Positive reviews of it are known to have been paid for by the developers, Zeobit.
Further opinion on it and how to uninstall MacKeeper malware:
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
Do NOT download or use the ‘MacKeeper uninstaller’ from the Zeobit site, as this will cause even more damage to your operating system.
This is also worth reading:
http://www.reedcorner.net/news.php/?p=245
Equally phoney is iAntivirus:
http://www.reedcorner.net/news.php/?p=341
* The expression ‘malware’ is a general term used by computer professionals to mean a variety of forms of hostile, intrusive, or annoying software.

Problem accessing informix ODBC 32 bit System DSN using Microsoft Query external data sources in Microsoft Excel 2010

Hi all...
I'm hoping if anybody could help me. I'm using Microsoft Excel 2010 + Windows 7 Professional 64 bit. I've installed the informix client sdk for odbc drivers to create odbc 32 bit connection. Before this, i had successfully installed in
another Windows 7 Professional 64 bit PC the informix client drivers and configured the odbc connection for it. During that time, i can access the 32 bit ODBC using the microsoft query from the Microsoft Excel 2007. But now...in the new PC, even though i had
successfully installed the informix client and manage to configure the 32 bit ODBC for it, my Microsoft Excel 2010 can't call/recognise the 32 bit ODBC connection as if the Microsoft Excel 2010 only called the 64 bit ODBC. Is it in Microsoft excel 2007
it is possible to recognise the 32 bit ODBC but the Microsoft Excel 2010 can't? Is there any solution if my Microsoft Excel 2010 still want to use the 32 bit ODBC connection.

Hi,
Excel 2007 has only 32-bit since 64-bit applications for Office are available only for Office 2010. Thus, you can use
32 bit ODBC between Microsoft Excel 2007 & Windows 7 Professional 64 bit. Now, you are using Microsoft Excel 2010 64 bit & Windows 7 Professional 64 bit, thus, you must install the 64 bit ODBC drive. If you still need to use 32
bit odbc drive, please use 32 bit Excel 2010. Here is the detailed steps:
http://datasummit.co.za/how-to-install-an-informix-odbc-driver-on-windows-7-for-ms-office-2010
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Nokia Photos - Is anybody still using it?

More and more people think Ovi Suite has lost its focus - to become the main software to manage a Nokia phone. I do not know what went wrong with it - perhaps the need to create a software that is simple to configure/use, comparing to Nokia PC Suite, but it's clear to me, this is not what Ovi Suite is...
Although, I admit that using Nokia software was not always so frustrating: I do remember how I felt when I first used Nokia Lifeblog - later it became Nokia Photos. I had paid in order to use it when it came out - still, I have no remorse for it - because the idea of managing your phone content over a timeline was amazing! When Nokia Lifeblog was replaced with Nokia Photos, for a moment I thought that's it; I would not be able to manage my phone's content anymore. Nevertheless, the misleading name, had nothing to do with what the software was offering...
Today, a friend suggested to see KIN.com - I was amazed with KIN Studio - a Nokia Lifeblog/Nokia Photo replica in Silverlight, that is offered for Windows Mobile powered phones. It looks like that Microsoft found the "phone content over timeline" idea more interesting, and they are investing on it - Nokia that originally come up with the idea is done with it, as Nokia Photos is an "archived" application!
Is anybody still using Nokia Photos? Does anyone think that the "phone content over timeline" idea should be something Nokia should be invest on, and this would be the idea to use for a software like Ovi Suite?
Regards,
George J.

Hey George,
I like the concept but, like everything else Nokia does, its just poor execution. They started Lifeblog, ok cool. Then came Photos; ok same concept. Now they've completely ditched Photos and gone to Ovi suite. They dont get the fact that people want to archive there data, not just switch to the latest gimmick. At least offer an effective way to smoothly transfer data. Argh!! so frustrating!
I have my earlier data on Lifeblog and my latest data on Photos (thank god I didn't merge the two). Photos wont open anymore And Nokia is pathetically useless in the matter. There market share worldwide will diminish pretty soon, thanks to Google and Apple
Here's the post with my issue:
/t5/PC-and-Mac-Software/Nokia-Photos-wont-open-load-help-Event-Details-posted/td-p/811905

Firefox 3.6.6 Not Displaying Gmail Contacts & Calendar and at least 1 other website correctly after using Microsoft Windows Easy Transfer

== Issue
==
I have another kind of problem with Firefox
== Description
==
In migrating from an XP PC to a new Win 7 PC, I downloaded Firefox to the new PC and it worked fine - got my Gmail contacts, calendar, etc. Later I used Micros Soft's Windows Easy Transfer to move data, profiles, etc to the new PC. Then could log onto Gmail but it would not show Contacts or Calendar. I then uninstalled Firefox and reinstalled it - nohelp, then I did a system to Restore to before I did the Windows Easy Transfer - no help, then I manually moved my Firefox Profile from the XP machine - no help. BTW at least one other website does not display correctly: http://www.hollandamerica.com/main/Main.action. NOTE - through all this Internet Explorer has shown these sites correctly.
== This happened
==
Every time Firefox opened
== Used Microsoft Windows Easy Transfer
==
== Troubleshooting information
==
Troubleshooting Information
This page contains technical information that might be useful when you're
trying to solve a problem. If you are looking for answers to common questions
about Firefox, check out our support web site.
Copy all to clipboard
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Flashblock 1.5.13 true {3d7eb24f-2740-49df-8937-200b1cc08f8a}
Google Notebook 1.0.0.22 false [email protected]
Microsoft .NET Framework Assistant 1.2.1 true {20a82645-c095-46ed-80e3-08825760534b}
PDF Download 3.0.0.1 false {37E4D8EA-8BDA-4831-8EA1-89053939A250}
Java Console 6.0.20 true
McAfee SiteAdvisor 3.0 true
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar 0
browser.history_expire_days 20
browser.history_expire_days.mirror 20
browser.places.importBookmarksHTML false
browser.places.importDefaults false
browser.places.leftPaneFolderId -1
browser.places.migratePostDataAnnotations false
browser.places.smartBookmarksVersion 2
browser.places.updateRecentTagsUri false
browser.startup.homepage https://mail.google.com/mail/?shva=1#contacts
browser.startup.homepage_override.mstone rv:1.9.2.3
browser.tabs.loadInBackground false
dom.disable_window_move_resize true
dom.event.contextmenu.enabled false
extensions.lastAppVersion 3.6.3
general.useragent.extra.microsoftdotnet ( .NET CLR 3.5.30729)
network.cookie.lifetimePolicy 1
network.cookie.prefsMigrated true
network.image.imageBehavior 0
places.last_vacuum 1273287748
print.print_printer HP Photosmart C7100 series
print.printer_HP_OfficeJet_Pro_1170Cse.print_bgcolor false
print.printer_HP_OfficeJet_Pro_1170Cse.print_bgimages false
print.printer_HP_OfficeJet_Pro_1170Cse.print_command
print.printer_HP_OfficeJet_Pro_1170Cse.print_downloadfonts false
print.printer_HP_OfficeJet_Pro_1170Cse.print_evenpages true
print.printer_HP_OfficeJet_Pro_1170Cse.print_footercenter
print.printer_HP_OfficeJet_Pro_1170Cse.print_footerleft &PT
print.printer_HP_OfficeJet_Pro_1170Cse.print_footerright &D
print.printer_HP_OfficeJet_Pro_1170Cse.print_headercenter
print.printer_HP_OfficeJet_Pro_1170Cse.print_headerleft &T
print.printer_HP_OfficeJet_Pro_1170Cse.print_headerright &U
print.printer_HP_OfficeJet_Pro_1170Cse.print_in_color true
print.printer_HP_OfficeJet_Pro_1170Cse.print_margin_bottom 0.3
print.printer_HP_OfficeJet_Pro_1170Cse.print_margin_left 0.5
print.printer_HP_OfficeJet_Pro_1170Cse.print_margin_right 0.3
print.printer_HP_OfficeJet_Pro_1170Cse.print_margin_top 0.3
print.printer_HP_OfficeJet_Pro_1170Cse.print_oddpages true
print.printer_HP_OfficeJet_Pro_1170Cse.print_orientation 0
print.printer_HP_OfficeJet_Pro_1170Cse.print_pagedelay 500
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_data 1
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_height 11.00
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_size 1634485807
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_size_type 0
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_size_unit 0
print.printer_HP_OfficeJet_Pro_1170Cse.print_paper_width 8.50
print.printer_HP_OfficeJet_Pro_1170Cse.print_printer HP OfficeJet Pro 1170Cse
print.printer_HP_OfficeJet_Pro_1170Cse.print_reversed false
print.printer_HP_OfficeJet_Pro_1170Cse.print_scaling 1.00
print.printer_HP_OfficeJet_Pro_1170Cse.print_shrink_to_fit true
print.printer_HP_OfficeJet_Pro_1170Cse.print_to_file false
print.printer_HP_Photosmart_C7100_series.print_bgcolor false
print.printer_HP_Photosmart_C7100_series.print_bgimages false
print.printer_HP_Photosmart_C7100_series.print_command
print.printer_HP_Photosmart_C7100_series.print_downloadfonts false
print.printer_HP_Photosmart_C7100_series.print_edge_bottom 0
print.printer_HP_Photosmart_C7100_series.print_edge_left 0
print.printer_HP_Photosmart_C7100_series.print_edge_right 0
print.printer_HP_Photosmart_C7100_series.print_edge_top 0
print.printer_HP_Photosmart_C7100_series.print_evenpages true
print.printer_HP_Photosmart_C7100_series.print_footercenter
print.printer_HP_Photosmart_C7100_series.print_footerleft &PT
print.printer_HP_Photosmart_C7100_series.print_footerright &D
print.printer_HP_Photosmart_C7100_series.print_headercenter
print.printer_HP_Photosmart_C7100_series.print_headerleft &T
print.printer_HP_Photosmart_C7100_series.print_headerright &U
print.printer_HP_Photosmart_C7100_series.print_in_color true
print.printer_HP_Photosmart_C7100_series.print_margin_bottom 0.300000011920929
print.printer_HP_Photosmart_C7100_series.print_margin_left 0.5
print.printer_HP_Photosmart_C7100_series.print_margin_right 0.300000011920929
print.printer_HP_Photosmart_C7100_series.print_margin_top 0.300000011920929
print.printer_HP_Photosmart_C7100_series.print_oddpages true
print.printer_HP_Photosmart_C7100_series.print_orientation 0
print.printer_HP_Photosmart_C7100_series.print_pagedelay 500
print.printer_HP_Photosmart_C7100_series.print_paper_data 1
print.printer_HP_Photosmart_C7100_series.print_paper_height 11.00
print.printer_HP_Photosmart_C7100_series.print_paper_size 1634485807
print.printer_HP_Photosmart_C7100_series.print_paper_size_type 0
print.printer_HP_Photosmart_C7100_series.print_paper_size_unit 0
print.printer_HP_Photosmart_C7100_series.print_paper_width 8.50
print.printer_HP_Photosmart_C7100_series.print_reversed false
print.printer_HP_Photosmart_C7100_series.print_scaling 0.80
print.printer_HP_Photosmart_C7100_series.print_shrink_to_fit false
print.printer_HP_Photosmart_C7100_series.print_to_file false
print.printer_HP_Photosmart_C7100_series.print_unwriteable_margin_bottom 0
print.printer_HP_Photosmart_C7100_series.print_unwriteable_margin_left 0
print.printer_HP_Photosmart_C7100_series.print_unwriteable_margin_right 0
print.printer_HP_Photosmart_C7100_series.print_unwriteable_margin_top 0
print.printer_hp_psc_1200_series.print_bgcolor false
print.printer_hp_psc_1200_series.print_bgimages false
print.printer_hp_psc_1200_series.print_command
print.printer_hp_psc_1200_series.print_downloadfonts false
print.printer_hp_psc_1200_series.print_evenpages true
print.printer_hp_psc_1200_series.print_footercenter
print.printer_hp_psc_1200_series.print_footerleft &PT
print.printer_hp_psc_1200_series.print_footerright &D
print.printer_hp_psc_1200_series.print_headercenter
print.printer_hp_psc_1200_series.print_headerleft &T
print.printer_hp_psc_1200_series.print_headerright &U
print.printer_hp_psc_1200_series.print_in_color true
print.printer_hp_psc_1200_series.print_margin_bottom 0.3
print.printer_hp_psc_1200_series.print_margin_left 0.5
print.printer_hp_psc_1200_series.print_margin_right 0.3
print.printer_hp_psc_1200_series.print_margin_top 0.3
print.printer_hp_psc_1200_series.print_oddpages true
print.printer_hp_psc_1200_series.print_orientation 0
print.printer_hp_psc_1200_series.print_pagedelay 500
print.printer_hp_psc_1200_series.print_paper_data 1
print.printer_hp_psc_1200_series.print_paper_height 11.00
print.printer_hp_psc_1200_series.print_paper_size 1634485807
print.printer_hp_psc_1200_series.print_paper_size_type 0
print.printer_hp_psc_1200_series.print_paper_size_unit 0
print.printer_hp_psc_1200_series.print_paper_width 8.50
print.printer_hp_psc_1200_series.print_reversed false
print.printer_hp_psc_1200_series.print_scaling 1.00
print.printer_hp_psc_1200_series.print_shrink_to_fit true
print.printer_hp_psc_1200_series.print_to_file false
privacy.clearOnShutdown.cookies false
privacy.clearOnShutdown.downloads false
privacy.clearOnShutdown.formdata false
privacy.clearOnShutdown.history false
privacy.clearOnShutdown.passwords true
privacy.cpd.cookies false
privacy.cpd.downloads false
privacy.cpd.formdata false
privacy.cpd.history false
privacy.item.downloads false
privacy.item.formdata false
privacy.item.history false
privacy.item.passwords true
privacy.sanitize.migrateFx3Prefs true
privacy.sanitize.promptOnSanitize false
privacy.sanitize.sanitizeOnShutdown true
security.warn_viewing_mixed false
== Firefox version
==
3.6.3
== Operating system
==
Windows 7
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 ( .NET CLR 3.5.30729)
== Plugins installed
==
*-Default Plug-in
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*Shockwave Flash 10.0 r45
*McAfee Virtual Technician plugin for Mozilla (Gecko Version: 1.8b1)
*3.0.50106.0
*NPWLPG
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Adobe PDF Plug-In For Firefox and Netscape

Oops - for some reason, this problem now seems to have gone away. May have had something to do with Flash. I'll keep my fingers crossed.

Paying bills online... can't complete the payment using email via TDS, but it worked when I used Microsoft Outlook as my email client???

to pay a bill via email, I download the pdf sent to me and am prompted to enter a security code. Everything works on the form, but the adobe does not allow me to select the year 2014 to complete the payment... using my TDS email. I had been using Microsoft Outlook for my email in the past and the download worked perfectly. my utility company told me to upgrade to Adobe 7... my Adobe version is XI

fwiw - sorta sounds like an email program problem.
Be well...

Connectivity between SQL Serevr 2008 and SAP BW using Microsoft Connector 1.0

Hi ALL
         I am trying to connect to SSIS 2008 to SAP BW using Microsoft Connector 1.0.
Following are stepes I performed.
1. Created RFC on SAP BW Server.
2. Created Prcess Chain in SAP BW.
3. Created SSIS Package using SAP BI Source. Here I set Execution Mode : P Trigger   Process Chain.
The process chain is executing fine on SAP BW Server, But it is unable to send back a
notification to SSIS package. And here my SSIS package failed.
I am getting following error message :
[SAP BI Source] Information: Process Start Process, variant Start Variant for MSBI has status Completed (instance D8Z84GJ2RLV7WCI2IYK5CZ1R3)
[SAP BI Source] Error: An internal exception occurred.
Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException:
An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
Before this error I am getting following messages are :
[SAP BI Source] Information: Process Data Transfer Process, variant Z09_O101 -> Z09_H101 has status Active (instance DTPR_D8Z84GJ2RLVZKYTTUHZRFEG0V)
[SAP BI Source] Information: The component is waiting for a notification.
Is there any way to test the both the way connections? I mean SAP BW -- SSIS &                SSIS --- SAPBW.
Can any one please explain me entire connectivity architecture between SSIS and SAP BW using Microsoft Connector 1.0. (I mean how these RFC are working and how SSIS is pulling the data from SAP BW)

I am having the same problem. We actually loaded data a few times but now it does not work. It is amazing that we cannot find help for this problem. Has anyone been successful using the BI connector 1.1 to load data to a BI system using SSIS. I think
this had to do with either a DLL problem on the machine running SSIS or the Service Pack level of the BI system. I cannot find any documentation showing versions. I have looked through the documentation that was written back in 2008 but can't seem to
get it to work.
Sorry we are trying to push data (BW Destination) to BI it looks like you are trying to get data from BI.

Can I use Microsoft SQL Server Management Studio version 11.0 to write SQL queries for "SQL Server Compact 4.0 Local Database"

Hi, Can I use Microsoft SQL Server Management Studio version 11.0 to write SQL queries for "SQL Server Compact 4.0 Local Database" ?
When I use Connect Object Explorer, the "Connect to Server" dialog box which pops up has only 4 selections in the Server Type Drop Down List. They are Database Engine, Analysis Services, Reporting Services & Integration Services. I have read
somewhere that there should be a compact database option. but I do not see it.
What I would like to do is use free form SQL Queries against the tables in "SQL Server Compact 4.0 Local Database" .
Once I have validated these queries, then I will use them in my Visual Studio 2012 C#, ASP.NET application. I created the Local Database using Visual Studio 2012 for use by my application.
Thank you for your help..
diana4

Hello,
With SSMS 2005 we have had the Option to work with SQL CE database files, but not with higher Version of SSMS.
You can use the free SQL CE Toolbax instead; see
http://sqlcetoolbox.codeplex.com/
Olaf Helper
[ Blog] [ Xing] [ MVP]

I use Microsoft Office Professional Plus 2010, when clicking a link in Outlook I always get a General Failure box stating 'The system cannot find the file specified' yet it still goes to the specified page. Any ideas on how to resolve this

I use Microsoft Office Professional Plus 2010, when clicking a link in Outlook I always get a box stating
General Failure. The URL was "http:// etc etc".The system cannot find the file specified.
Yet it still goes to the specified page. Any ideas on how to resolve this

I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks.

I had a Microsoft tech access my computer remotely to resolve issues with my hotmail acct. There were files that needed to be deleted and he also changed some settings. Later, when I tried to open InDesign I received the following error: AMT Subsystem

I had a Microsoft tech access my computer remotely to resolve issues with my hotmail acct. There were files that needed to be deleted and he also changed some settings.
Later, when I tried to open InDesign I received the following error:
AMT Subsystem Failure
The licensing subsystem has failed catastrophically. You must reinstall or call customer support.
I rebooted the computer and tried again:
Licensing for this product has stopped working.
You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help.
I can access Acrobat and MS Office programs, it's just the CS3 programs that I can't access. Can I uninstall and then reinstall CS3 without an access (un-lock) code?

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Enterprise DNS servers are not responding when using Windows NLB with Direct Access 2012

Hi
We have installed Direct Access 2012 as one server installation:
- Two network cards. First one in DMZ and second one in internal network
- Two consecutive IP addresses configured in DMZ because of Teredo
- PKI because of Win7 Clients IPSec
- Our corporate network is native IPv4 so we use DNS64/NAT64 and DA-server is configured as DNS
- DA-servers are VMWare virtual machines
One server installation works fine and now we want to use Windows NLB as load balancing. NLB installation goes fine too,
but problem is DNS. If we still try to use DA-server as DNS there comes error message below
None of the enterprise DNS servers 2002:xxxx:xxxx:3333::1 used by DirectAccess clients for name resolution are responding. This might affect DirectAccess client connectivity to corporate resources.
When trying to configure DNS using Infrastructure access setup, DNS cannot be validated when using DA-servers DIP or cluster VIP. Only domain local DNS looks to be ok but those have no IPv6 addressess. So how DNS should be configured when using multicast
NLB?
Tried to remove name suffix then adding again => Detect DNS server => DA-server IPv6 address found => validate => The specified DNS server is not responding...
Then tried to ping detected address => General failure
NLB clusters are configured as multicast and static ARPs are configured too. Both clusters can be connected from those subnets as they should be.
Any clues how to fix this?
~ Jukka ~

Hi,
Your question falls into the paid support category which requires a more in-depth level of support. Please visit the below link to see the various
paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Using MicroSoft. XMLHttp in jsp or java

Hi,
Can anybody tell me is it good to use
MicroSoft. XMLHttp in jsp and java programs for connectint to remote url and sending xml data..(in java script fucntions)
regards,

By default, JSTL variables are kept in servlet
attributes. Default is to store it in the page
context. You can make it request/session/application
scope as required by an attribute of the set tag.Hi there,
Can anyone advise how to access JSP variables in JSTL?
Can it be done as the same method through request/session/application scope?
Thnks...

Anybody had used Microsoft NLB to LoadBalance LDAP traffic?

Similar Messages

Maybe you are looking for