Anybody know the maximum channel, concurrent connection limit
Anybody know the maximum channel that can be set and the maximum concurrent connection that listener can support for WebSphere 6.0 Solaris.
One more question, please correct if I'm wrong; in order to set above value, I have to modify qm.ini as below:
TCP:
Port=1414
KeepAlive=YES
ListenerBacklog=800 --------> for maximum concurrent connection that listener supports
Channels:
MaxChannels=1000 ----------> for maximum channel for QManager
MaxActiveChannels=1000
Every suggestions would be appreciated.
Not really sure what you mean by "half-closing" and the question you're asking. Can you clarify?
Similar Messages
-
Macbook Air failed wifi connection - Does anybody know the solution?
Macbook Air has been connecting to Wi-Fi network without issue for almost 2 years.
Haven't been able to find a solution to 'failed Wi-Fi connection' so far.
Wi-Fi is turned on but is not connected to a network.
Wi-Fi Settings Failed.
Have tried trashing:
Library/Preferences/SystemConfiguration/com.apple.network.eapolclient.configurat ion.plist
Library/Preferences/SystemConfiguration/com.apple.network.identification.plist
Networkintefaces.plist
And restart, but no change.
Mac OS X Version 10.7.5
1.6GHz Intel Core i5
Does anybody know the solution?Had restarted the router a few times to no avail.
Checked out the vendor's website, but wasn't able to find anything of use, -it was limited options wise.
Nothing in the OS X recommendations for Wi-Fi settings jumped out me.
I wasn't able to experiment with the band/channel settings.
I ended up buying a USB/Ethernet adaptor so I could at least have access to the net (5 days ago), -which didn't change the Wi-Fi issue...
However, after a couple of days without use, I've woken the machine and noticed the Wi-Fi signal at full strength. The network is detected and connected!
Problem solved ...But how? -
Revision: 21154
Revision: 21154
Author: [email protected]
Date: 2011-04-27 07:16:48 -0700 (Wed, 27 Apr 2011)
Log Message:
Made sure the long-polling channel uses the new unlimited persistent connection limit as well when there's no known user agent.
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/endpoints/BasePollingHTTPEndpoint.javaRemember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
-
Is it possible to know the maximum db output of a pair of headphones based on your laptop volume
Hello all, I just joined the forum on advice from r/audioengineering. I asked this question over there and they thought you would be better to answer.
My question is fairly straightforward (may not be simple).
Is there a way to know the maximum db output of a pair of headphones (such as SONY MDR 7506) at a set system output on a macbook pro (for example 4 bars)?
Ideally I would like to know that the headphones cannot exceed a level (say 75db) no matter what I throw at it. Then I can set the volume level of the mac, and stop worrying about headphone volume for ear damage.
I produce music on my laptop for hours on end and the volume of the sound can vary widely quickly when different effects and sounds are introduced.
I know there are headphones that limit the db output, but the limit is too high (usually 95 or 100 db) from what I have seen.
Thank you for your help (if possible)This is a difficult question to answer with any exactness as it depends on a number of factors. Program, test phones sensitivity/resistance...meter response/calibration...etc...
I just did a quick measurement on a pair of 7506's using a phonic tool with program (classic rock) at ear cup, unweighted. with program approx. -5 bars on the "volume display" was approx. 75db
With pink noise approx -6 bars about a 75db average (you can subdivide each bar by 4 using shift+option)
Max w/pink noise 88db.
This was all sourced from iTunes with the volume on iTunes all the way up.
Keep in mind this was quick and dirty, but may give you an idea. As I mentioned before there are a ton of variables involved, and this was done quickly.
Hope this helps you some.
I should have also mentioned that this is db SPL, and I had the mic in between the cups to iso it from some ambient noise. I don't know if all the machines are alike in output and gain structure. -
The maximum report processing jobs limit configured has been reached -Error
I have Created a common page that has a CrystalReportViewerControl (name of this page is ShowReport.aspx). The report name and database name that required for the report is being passed in a querystring. The database connection info is being pulled from the web.config file. All of the reports that I am dealing with have dynamic parameters and the Crystal Prompt page is automatically being created by the crystal viewer for these. Everything in my application is working fine except that when I try to access any report for the 76th. time I get the following error "The maximum report processing jobs limit configured by your system administrator has been reached."
I have already researched this error and am aware that the PrintJobLimit can be modifed to increase this limit or can be set to -1 if we need to allow unlimited connections. However doing this is not an option due to the degradation of server performance.
The other option that I have tried is to make sure I close and dispose of the report document object on the Page_unload or the page_SavedStateComplete() however on doing so even the session variable that I am using to store the originally created reportdocument is loosing all of the values it requires to display the report. The session variable is still available i.e. it is still of type report document but it has no values for any of the properties like FileName, database etc , basically for all of those properties it show an error "Invalid File Path" when viewed in debug mode.
I have already tried several approaches but with no luck. Every single time I close the originally created ReportDocument object I loose all the required values in the Session
I am using Crystal Report XI R2 , .Net 2.0 and ASP.net
Following is the code: (Any help will be highly appreciated) Thanks:
Option Strict On
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Imports System.Data.SqlClient
Imports System.IO
Partial Class _ShowReport
Inherits System.Web.UI.Page
Private FechReport As ReportDocument
Dim strSelectedDatabase As String
Dim strReportsFolderPath As String =
System.Configuration.ConfigurationManager.AppSettings("ReportsFolderPath").ToString()
Dim strReportFileName As String
Dim strReportFullPath As String
Dim iInsertedLogId As Integer 'This variable is used to store the inserted log id for the executed report.
Dim strConnString As String = System.Configuration.ConfigurationManager.AppSettings("ConnString").ToString()
Dim strServerName As String = System.Configuration.ConfigurationManager.AppSettings("CR_ServerName").ToString()
Dim strUserName As String = System.Configuration.ConfigurationManager.AppSettings("CR_UserName").ToString()
Dim strPassword As String = System.Configuration.ConfigurationManager.AppSettings("CR_Password").ToString()
Protected Sub Page_OnSaveStateComplete(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.SaveStateComplete
If IsPostBack Then
If iInsertedLogId > 0 Then
UpdateReportLog_ReportServedTime(iInsertedLogId)
If Not FechReport Is Nothing Then
FechReport.Close()
End If
End If
End If
End Sub
Sub Page_Unload(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Unload
If Not FechReport Is Nothing Then
'FechReport.Close()
'FechReport.Dispose()
'GC.Collect()
End If
End Sub
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim sRptFileName As String
If Request.QueryString("database") "" Then
strSelectedDatabase = Request.QueryString("database")
Else
Response.Write("A Valid Database has not been supplied to this page")
Response.End()
End If
If Request.QueryString("ReportFileName") "" Then
strReportFileName = Request.QueryString("ReportFileName")
strReportFullPath = strReportsFolderPath & strReportFileName
Else
Response.Write("A Valid Report has not been supplied to this page")
Response.End()
End If
sRptFileName = strReportFullPath
If Not IsPostBack Then
FechReport = New ReportDocument
If Not FechReport Is Nothing Then
ShowReport(sRptFileName)
End If
Else
If (Session("oReportDocument") Is Nothing) Then
FechReport = New ReportDocument
ShowReport(sRptFileName)
Else
'FechReport = New ReportDocument
'FechReport = CType(Session("oReportDocument"), ReportDocument)
myCrystalReportViewer.ReportSource = Session("oReportDocument")
'myCrystalReportViewer.ReportSource = FechReport
End If
End If
End Sub
Public Function ShowReport(ByVal strReportFileName As String) As Boolean
Dim blNoErrors As Boolean = True
Dim crDatabase As Database
Dim crTables As Tables
Dim crTable As Table
Dim crTableLogOnInfo As TableLogOnInfo
Dim crConnectionInfo As ConnectionInfo
FechReport.FileName = strReportFileName
myCrystalReportViewer.ReportSource = FechReport
crConnectionInfo = New ConnectionInfo()
With crConnectionInfo
.ServerName = strServerName
.DatabaseName = strSelectedDatabase
.UserID = strUserName
.Password = strPassword
End With
Try
crDatabase = FechReport.Database
crTables = crDatabase.Tables
For Each crTable In crTables
crTableLogOnInfo = crTable.LogOnInfo
crTableLogOnInfo.ConnectionInfo = crConnectionInfo
crTable.ApplyLogOnInfo(crTableLogOnInfo)
Next
Catch ex As Exception
Response.Write(ex.Message & ControlChars.NewLine & ex.InnerException.ToString & ControlChars.NewLine)
Exit Function
End Try
Session("oReportDocument") = FechReport
'FechReport.Close()
'FechReport.Dispose()
'GC.Collect()
Return blNoErrors
End Function
End ClassI have looked into Caching the report document as well. However, as you mentioned in the post it, it will only be usefull when the DB and the report parameters remain the same which is not the case in our application. We have multiple identical databases and hundreds of reports. Our users have the option of using a combination of any database and any reports, each report having numerous parameters.
Since one user can only access one report at a time. i do have cleanup code that removes the session variable used to store the reportdocument object in the page that is initially used to call the ShowReport.aspx page.
I understand now that the CR.net SDK is only good for light reporting only. Unfortunately when we started development based on all of the articles that I gathered, I didn't anticipate running to issues like this. But I guess that's the nature of the business :-). And hence there are people like you who go out of the way to answer these difficult questions.
Regards, -
Receive connector 'Connector Name' rejected an incoming connection from IP address "IP of our load balancer". The maximum number of connections per source ('20') for this connector has been reached by this source IP address.
I understand that I can up the limit - however, I'm wondering if there is a way to up the limit for ONE specific IP (our load balancer)
TAGIt does not look like you can up the limit for a specific IP but you might be able to create a separate receive connector for that IP address (and then change the limit).
That is just a thought. Others may have more input on why you may or may not want to do that in practice.
What SMTP traffic would not be coming from the load balancer?
Is the objective to *not* allow some other (possibly malicious) source from creating excessive connections to the server?
Otherwise, this is a good discussion about the different parameters that must be considered if you do decide to adjust the values (changing one may not suffice):
http://letsexchange.blogspot.com/2012/04/receive-connector-rejected-incoming.html
Nuno Mota's blog (MVP)
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
The maximum report processing jobs limit configured by your system administ
I have Created a common page that has a CrystalReportViewerControl (name of this page is ShowReport.aspx). The report name and database name that required for the report is being passed in a querystring. The database connection info is being pulled from the web.config file. All of the reports that I am dealing with have dynamic parameters and the Crystal Prompt page is automatically being created by the crystal viewer for these. Everything in my application is working fine except that when I try to access any report for the 76th. time I get the following error "The maximum report processing jobs limit configured by your system administrator has been reached."
I have already researched this error and am aware that the PrintJobLimit can be modifed to increase this limit or can be set to -1 if we need to allow unlimited connections. However doing this is not an option due to the degradation of server performance.
The other option that I have tried is to make sure I close and dispose of the report document object on the Page_unload or the page_SavedStateComplete() however on doing so even the session variable that I am using to store the originally created reportdocument is loosing all of the values it requires to display the report. The session variable is still available i.e. it is still of type report document but it has no values for any of the properties like FileName, database etc , basically for all of those properties it show an error "Invalid File Path" when viewed in debug mode.
I have already tried several approaches but with no luck. Every single time I close the originally created ReportDocument object I loose all the required values in the Session
I am using Crystal Report XI R2 , .Net 2.0 and ASP.net
Following is the code: (Any help will be highly appreciated) Thanks:
Option Strict On
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Imports System.Data.SqlClient
Imports System.IO
Partial Class _ShowReport
Inherits System.Web.UI.Page
Private FechReport As ReportDocument
Dim strSelectedDatabase As String
Dim strReportsFolderPath As String =
System.Configuration.ConfigurationManager.AppSettings("ReportsFolderPath").ToString()
Dim strReportFileName As String
Dim strReportFullPath As String
Dim iInsertedLogId As Integer 'This variable is used to store the inserted log id for the executed report.
Dim strConnString As String = System.Configuration.ConfigurationManager.AppSettings("ConnString").ToString()
Dim strServerName As String = System.Configuration.ConfigurationManager.AppSettings("CR_ServerName").ToString()
Dim strUserName As String = System.Configuration.ConfigurationManager.AppSettings("CR_UserName").ToString()
Dim strPassword As String = System.Configuration.ConfigurationManager.AppSettings("CR_Password").ToString()
Protected Sub Page_OnSaveStateComplete(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.SaveStateComplete
If IsPostBack Then
If iInsertedLogId > 0 Then
UpdateReportLog_ReportServedTime(iInsertedLogId)
If Not FechReport Is Nothing Then
FechReport.Close()
End If
End If
End If
End Sub
Sub Page_Unload(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Unload
If Not FechReport Is Nothing Then
'FechReport.Close()
'FechReport.Dispose()
'GC.Collect()
End If
End Sub
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim sRptFileName As String
If Request.QueryString("database") <> "" Then
strSelectedDatabase = Request.QueryString("database")
Else
Response.Write("A Valid Database has not been supplied to this page")
Response.End()
End If
If Request.QueryString("ReportFileName") <> "" Then
strReportFileName = Request.QueryString("ReportFileName")
strReportFullPath = strReportsFolderPath & strReportFileName
Else
Response.Write("A Valid Report has not been supplied to this page")
Response.End()
End If
sRptFileName = strReportFullPath
If Not IsPostBack Then
FechReport = New ReportDocument
If Not FechReport Is Nothing Then
ShowReport(sRptFileName)
End If
Else
If (Session("oReportDocument") Is Nothing) Then
FechReport = New ReportDocument
ShowReport(sRptFileName)
Else
'FechReport = New ReportDocument
'FechReport = CType(Session("oReportDocument"), ReportDocument)
myCrystalReportViewer.ReportSource = Session("oReportDocument")
'myCrystalReportViewer.ReportSource = FechReport
End If
End If
End Sub
Public Function ShowReport(ByVal strReportFileName As String) As Boolean
Dim blNoErrors As Boolean = True
Dim crDatabase As Database
Dim crTables As Tables
Dim crTable As Table
Dim crTableLogOnInfo As TableLogOnInfo
Dim crConnectionInfo As ConnectionInfo
FechReport.FileName = strReportFileName
myCrystalReportViewer.ReportSource = FechReport
crConnectionInfo = New ConnectionInfo()
With crConnectionInfo
.ServerName = strServerName
.DatabaseName = strSelectedDatabase
.UserID = strUserName
.Password = strPassword
End With
Try
crDatabase = FechReport.Database
crTables = crDatabase.Tables
For Each crTable In crTables
crTableLogOnInfo = crTable.LogOnInfo
crTableLogOnInfo.ConnectionInfo = crConnectionInfo
crTable.ApplyLogOnInfo(crTableLogOnInfo)
Next
Catch ex As Exception
Response.Write(ex.Message & ControlChars.NewLine & ex.InnerException.ToString & ControlChars.NewLine)
Exit Function
End Try
Session("oReportDocument") = FechReport
'FechReport.Close()
'FechReport.Dispose()
'GC.Collect()
Return blNoErrors
End Function
End Classplease post your question in the Business Onjects SDK Application Development Forums.
-
We have started receiving load report failed error again in one of our production servers. This problem occurred some months ago and on that time we found that in the code reportdocument.close method was not called so we added into the code and set the print job limit to 400 and problem went away for couple of months but now it has started again.
Load report failed.
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
at AppSuite.WebApp.CrystalViewer.LoadReport(Boolean bRefresh)
at AppSuite.WebApp.CrystalViewer.Page_Load(Object sender, EventArgs e)
at System.Web.UI.Control.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
The maximum report processing jobs limit configured by your system administrator has been reached.
at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
This is our code
Private m_oReportDocument As New ReportDocument
Private ReadOnly Property ReportId() As Integer
Get
Return Integer.Parse(Me.Request.QueryString("r"))
End Get
End Property
Private Property CacheKey() As String
Get
Dim sCacheKey As String = Me.Request.QueryString("ck")
If sCacheKey Is Nothing OrElse sCacheKey.Length = 0 Then
sCacheKey = CStr(Me.ViewState("CacheKey"))
End If
Return sCacheKey
End Get
Set(ByVal Value As String)
Me.ViewState("CacheKey") = Value
End Set
End Property
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
If Not Me.IsPostBack Then
LoadReport()
End If
End Sub
Private Sub btnPDF_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnPDF.Click
'Redirect to the PDF Viewer passing it the ReportId and CacheKey
Me.Response.Redirect(String.Format(ReportHelper.PDFViewerURL, Me.ReportId, Me.CacheKey))
End Sub
Private Sub btnRTF_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRTF.Click
'Redirect to the RTF Viewer passing it the ReportId and CacheKey
Me.Response.Redirect(String.Format(ReportHelper.RTFViewerURL, Me.ReportId, Me.CacheKey))
End Sub
Private Sub btnExcel_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExcel.Click
'Redirect to the Excel Viewer passing it the ReportId and CacheKey
Me.Response.Redirect(String.Format(ReportHelper.ExcelViewerURL, Me.ReportId, Me.CacheKey))
End Sub
Private Sub crvMain_Navigate(ByVal source As Object, ByVal e As CrystalDecisions.Web.NavigateEventArgs) Handles crvMain.Navigate
LoadReport()
End Sub
Private Sub crvMain_Search(ByVal source As Object, ByVal e As CrystalDecisions.Web.SearchEventArgs) Handles crvMain.Search
LoadReport()
End Sub
Private Sub crvMain_ViewZoom(ByVal source As Object, ByVal e As CrystalDecisions.Web.ZoomEventArgs) Handles crvMain.ViewZoom
LoadReport()
End Sub
Private Sub crvMain_Drill(ByVal source As Object, ByVal e As CrystalDecisions.Web.DrillEventArgs) Handles crvMain.Drill
LoadReport()
End Sub
Private Sub crvMain_DrillDownSubreport(ByVal source As Object, ByVal e As CrystalDecisions.Web.DrillSubreportEventArgs) Handles crvMain.DrillDownSubreport
LoadReport()
End Sub
Private Sub crvMain_ReportRefresh(ByVal source As Object, ByVal e As CrystalDecisions.Web.ViewerEventArgs) Handles crvMain.ReportRefresh
LoadReport(True)
End Sub
Private Sub LoadReport()
LoadReport(False)
End Sub
Private Sub LoadReport(ByVal bRefresh As Boolean)
If Common.CouldBeMultiDB(User.Identity.Name) AndAlso TypedSession.OverrideCompany.Length > 0 Then
Common.Settings.OverrideCompany = TypedSession.OverrideCompany
End If
'Get the report data
Dim dtReport As DataTable = ReportHelper.GetReportData(Me.CacheKey, bRefresh)
'If there is data to display bind it to the Crystal Viewer
If dtReport.Rows.Count > 0 Then
With m_oReportDocument
.Load(ReportHelper.GetReportPath(Me.ReportId))
.SetDataSource(dtReport)
.PrintOptions.PaperSize = Common.Settings.CrystalPaperSize
End With
crvMain.ReportSource = m_oReportDocument
Else
'Hide the controls and display a message if there is no data
crvMain.Visible = False
btnPDF.Visible = False
btnExcel.Visible = False
lblNoResults.Visible = True
End If
End Sub
Protected Sub Page_Unload(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Unload
m_oReportDocument.Close()
m_oReportDocument.Dispose()
End Sub
Can any one tell if we are doing anything wrong in our code. We don't use sub reports any more however we do use paging and some of our reports have 200+ pages. Also is it possible to find out print job limit and concurrent users by writing some code.
ThanksI suspect it's not the code - after all it worked(?). It is much more likely that, it is the load. Remember that the report engine can only handle three concurrent requests at any one time. Also, remember that you can run out of print jobs real fast as subreports also count as print job. E.g.; say someone added a report that has 4 subreports in the detail section, the report runs a 100 records, you will be at 401 print jobs and thus over the limit. You can keep increasing the print job limit, but that means you are loading the server and eventually you will bring it down too...
It may be time to consider, web farms or Report Application Server to scale up(?).
Getting to the latest SP is never a bad idea either.
And have a look at the scalability suggestions in this doc:
Crystal Reports 2008 Component Engine Scalability
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
The maximum report processing jobs limit configured reach
Getting error "The maximum report processing jobs limit configured by your system administrator has been reached."
after running a number of reports.
The problem clears up when I issue an IISreset.
Environment
- Windows 2008 Server.
- 3 x ASP .Net application using CR.Net developed using VS2005.
- Installed full version of Crystal Reports 2008.
I also have a full version of Crystal Reports 2008 installed on my developemnt system along with VS 2005.
I don't understand this error. The load on the server for running reports is extremely low. When I talked to Business Objects about the configuration he did not see any issues.
What do I need to do to resolve this issue without having to spend a ton of money?
Is there something I can do in code to reslove this issue?
The other question I have is CR.NET from I gathered reading other posts is limited to 3 concurrent licenses. Can this be increased? If so, who do I contact to purchase addtional licenses?
Regards
PaulMake sure you are closing and disposing of the report objects as you get done with them:
Dim report as New ReportDocument
Protected Sub Page_load()
End Sub
Private Page_Unload()
report.close()
report.dispose()
GC.Collect
End Sub
//C# (on form open):
private void WebForm1_Init(object sender, System.EventArgs e)
if (boReportDocument != null)
boReportDocument.Close();
boReportDocument.Dispose();
GC.Collect();
// C# on form close
private void Page_Unload(object sender, EventArgs e)
if (boReportDocument != null)
{ boReportDocument.Close();
boReportDocument.Dispose();
GC.Collect();
If you don't do the above, you either run out of licenses or memory.
The other question I have is CR.NET from I gathered reading other posts is limited to 3 concurrent licenses. Can this be increased?
No, this can not be increased. However, you can upgrade to the CR Server which you can bump up to 20 concurrent licenses and 5 user licenses. The following may be of help:
https://boc.sdn.sap.com/node/972
Ludek -
Does anybody know the error code 11 while updating to ios 4.3.3.? thx
does anybody know the error code 11 while updating to ios 4.3.3. on an ipad1? thx
but my hard drive is still lot of spaces...still keep on trying to update...
-
Is there anybody know the meaning of Condition control in pricing?
Hi everybody,
When I create a sales order in CRM,and the system will call IPC for pricing calculation,
Object "pricingcondition" is one of the parameters,in which there is a field named "m_control",it's condition control.
As far as I know,it has some potential values,such as "A","B",and "C".Is there anybody knows the meanning of them?
Thanks.
Edited by: Jerry cui on May 20, 2010 8:20 AMhi,
This field Indicates whether the prices or values in a condition are fixed or whether they have been changed and, if so, in what way. For example the indicator shows, for example, if the prices generated by a condition have been changed manually during processing.
A Adjust for quantity variance
B Free
C Changed manually
D Fixed
E Condition value and basis fixed
F Condition value fixed (billed items)
G Condition basis fixed
H Condition value fixed (cost price)
This field is same as the R/3 field KONV-KSTEU.
Thanks and Regards
shanto aloor -
Does anybody know the exact date when iOS 6 will be released?
Does anybody know the exact date when iOS 6 will be released? I know it will be coming out in the Fall, but I was wondering if anybody knew the exact date.
no one but apple knows for sure, and I'm willing to bet at this point in time all they have is a target date (if the software package was done it'd be released)
Bear in mind also, the first 48-72 hours after the software's release it's often quite challenging to get the update or it takes a lot of time because you're one of millions that are trying to get on the servers. So release date and available/accessible date can be separated by a bit. -
Is there anybody knows the designed logic in report RHAUTUPD_NEW?
Hi, expertes,we met a problem has somthing with SAP standard report RHAUTUPD_NEW,
is there anybody knows the designed auhtorization profile delete/add logic?
Thanks in advance.
Jerry.I don't understand the problem. Please post the complete screenshot. And possibly the outline view.
-
The maximum report processing jobs limit configured by your system ...
Hi,
I'm a developer with WXP, VS2003 and CR2008, Framework 1.1.
I have a message from my server (W2003): "The maximum report processing jobs limit configured by your system administrator has been reached":
What's the matter?
The server has installed redistributable of CR2008.
Thanks.I solved it in Page Unload, doin' this:
private void printReports_Unload(object sender, System.EventArgs e)
CrystalReportViewer1.Dispose();
CrystalReportViewer1 = null;
if((reportDocument1 != null) && (reportDocument1.IsLoaded))
reportDocument1.Close();
reportDocument1.Dispose();
Then, I stressed webapp with WAPT 4.0, and everything works perfect.
Do you advise me to change too keyreg?
Thanks.
Edited by: Santiago Magaña on Nov 3, 2008 9:47 AM -
My final cut studio keeps giving me this error out of memory message when ever i try to render a piece of footage and its closing unexpected. Does anybody know the reason?
I had this problem about 2 months ago and, as others have suggested in this thread, eventually traed it backed to some stills I had scanned and brought into the project. Accidentally I had changed the scanner settings, with the result that a couple of skills were well beyond 1980 x 1020 pixels. I resampled the stills and everything was fine again. Hope this might help.
Maybe you are looking for
-
how do you add text to images in Aperture?
-
Hi there, I'd like someone reply with help. I have an application running in a server and it goes fine. It is entirely in one .EAR, containing libraries and EJBs. Externally I have my DataSource, stated in an .XML file. Now, I'd like to include the D
-
Can I download Microsoft office home and student 2007 on my mac mini
Can I download microsft office home and student 2007 on my Mac mini
-
Multiple Catalogs in B2B scenario - Is it possible?
We have a customer business requirements to create virtual catalogs for channel partners. What I mean by virtual catalog is that a specific channel partner gets to see only a list specific products. In other words create custom catalog for each chann
-
Compiling .java files during program execution.
I have a program that read events in from a file and creates custom Event objects (which extend Thread) from this information, and then later the events are activated depending on the timing information that was provided in the file. Everything works