Anychart: Bug when using chart template and Javascript

Hi all,
When I create a chart using custom xml and a template -
<templates path="#IMAGE_PREFIX#Chart_templates/my_chart_template.xml"/>If I call toggle a series using some javascript:
 var chart = getChart(); // function created by the chart embedding javascript to capture a reference to the chart object
 chart.showSeries('population_average', $('input[is_series_toggle="true"]').is(':checked'));
 chart.refresh();The series is toggled correctly but the chart is refreshed without applying the chart template, so it looks ugly.
Anychart claim this is an Apex specific issue because Apex uses a special build of Anychart? Anyone else encountered this problem and have a workaround. Or any other suggestions would be welcome.

Hello Sara,
The behavior you are describing is a long time known issue. It is a bug that should have been resolved by now, but for some reason was not. Maybe it’s because none of the default (built-in) page templates is using images with TABs.
The workaround is to create your own img tag in the appropriate page template section, using the #TAB_NAME# substitution string. The principle is to name your corresponding images like current_#TAB_NAME#.gif and non_current_#TAB_NAME#.gif, where the #TAB_NAME# part in the file name is replaced with the actual tab name. So, for a TAB called EMP, you’ll have two image files by the names current_EMP.gif and non_current_EMP.gif.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Similar Messages

Page designer show small view when using page template and cannot be run

Dear Experts,
I need to make some page templates.
I have build 2 simple page templates, let say template0 & template1 which template1 using template0.
It show no any problem until I close my Jdeveloper & reopen it.
When I reopen template1, it show so small in designer (Jdeveloper window).
Is there any wrong?
I have build another template, just 1 template.
When I used it at the first time, no any strange behavior occur.
After ... (I don't exactly when), it give me the same view in my designer.
Then I force to use my first tempate (template1 which used template0 inside), I cannot run my application at all.
After wait several minutes, I found error log in my log messages.
*#### Server Instance DefaultServer could not be started: Server Instance was terminated.*
Above the message, I found another error messages:
*Jun 7, 2009 5:40:19 PM ComponentMetadataHandler _error*
WARNING: error parsing component tag in file: null/tag:xmlContent/id:dte_160d74a
org.xml.sax.SAXParseException: <Line 69, Column 7>: XML-20100: (Fatal Error) Expected 'EOF'.
* at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)*
Is there anyone that can help me to find out why this error occured?
Should I raise this problem to metalink or just can post it in this forum?
Many thanks for your supporting...
N.B: Below I attach my template0 (AHM000.jspx) and template1 (AHM001.jspx)
Best regards,
Dominic Chandra
AHM000.jspx
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:c="http://java.sun.com/jsp/jstl/core">
<c:set var="ahmwebtemplateBundleAHM000"
value="#{adfBundle['com.ahm.lib.view.template.AHMWebTemplateBundle']}"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<af:pageTemplateDef var="attrs">
<af:panelSplitter orientation="vertical" splitterPosition="60">
<f:facet name="first">
<af:decorativeBox theme="dark" topHeight="0px">
<f:facet name="center">
<af:panelHeader text="#{attrs.pageTitle}">
<f:facet name="context"/>
<f:facet name="menuBar"/>
<f:facet name="toolbar"/>
<f:facet name="legend">
<af:panelGroupLayout>
<af:outputText value="#{attrs.pageName}"/>
<af:outputText value="#{sessionScope.userState.userName}"/>
<f:facet name="separator">
<af:spacer width="10" height="10"/>
</f:facet>
</af:panelGroupLayout>
</f:facet>
<f:facet name="info">
<af:statusIndicator/>
</f:facet>
</af:panelHeader>
</f:facet>
<f:facet name="top"/>
</af:decorativeBox>
</f:facet>
<f:facet name="second">
<af:panelSplitter orientation="vertical" positionedFromEnd="true"
splitterPosition="20">
<f:facet name="first">
<af:decorativeBox theme="light" topHeight="0px">
<f:facet name="center">
<af:facetRef facetName="mainArea"/>
</f:facet>
<f:facet name="top"/>
</af:decorativeBox>
</f:facet>
<f:facet name="second">
<af:panelGroupLayout inlineStyle="text-align:right;">
<af:outputText value="#{ahmwebtemplateBundleAHM000.VERSION} #{attrs.appVersion}"
inlineStyle="color:Navy;"/>
<af:outputText value="© 2009 PT Astra Honda Motor"
inlineStyle="color:Navy; font-weight:bold;"/>
<f:facet name="separator">
<af:spacer width="10" height="10"/>
</f:facet>
</af:panelGroupLayout>
</f:facet>
</af:panelSplitter>
</f:facet>
</af:panelSplitter>
<af:xmlContent>
<component xmlns="http://xmlns.oracle.com/adf/faces/rich/component">
<display-name>AHM000</display-name>
<facet>
<description>Main Area</description>
<facet-name>mainArea</facet-name>
</facet>
<attribute>
<attribute-name>pageTitle</attribute-name>
<attribute-class>java.lang.String</attribute-class>
<default-value>Page Title</default-value>
<required>true</required>
</attribute>
<attribute>
<attribute-name>
pageName
</attribute-name>
<attribute-class>
java.lang.String
</attribute-class>
<default-value>
ahmxxyyynnnznn
</default-value>
<required>
true
</required>
</attribute>
<attribute>
<attribute-name>
appVersion
</attribute-name>
<attribute-class>
java.lang.String
</attribute-class>
<default-value>
1.0.0
</default-value>
</attribute>
</component>
</af:xmlContent>
</af:pageTemplateDef>
</jsp:root>
AHM001.jspx
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:c="http://java.sun.com/jsp/jstl/core">
<c:set var="ahmwebtemplateBundleAHM001"
value="#{adfBundle['com.ahm.lib.view.template.AHMWebTemplateBundle']}"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<af:pageTemplateDef var="attrs">
<af:pageTemplate viewId="/template/AHM000.jspx">
<f:facet name="mainArea">
<af:panelSplitter splitterPosition="#{attrs.searchAreaPosition}">
<f:facet name="first">
<af:facetRef facetName="searchArea"/>
</f:facet>
<f:facet name="second">
<af:panelSplitter positionedFromEnd="true"
splitterPosition="#{attrs.infoAreaPosition}">
<f:facet name="first">
<af:facetRef facetName="mainArea"/>
</f:facet>
<f:facet name="second">
<af:facetRef facetName="infoArea"/>
</f:facet>
</af:panelSplitter>
</f:facet>
</af:panelSplitter>
</f:facet>
<f:attribute name="pageTitle"
value="#{attrs.pageTitle}"/>
<f:attribute name="pageName" value="#{attrs.pageName}"/>
<f:attribute name="appVersion" value="#{attrs.appVersion}"/>
</af:pageTemplate>
<af:xmlContent>
<component xmlns="http://xmlns.oracle.com/adf/faces/rich/component">
<display-name>AHM001</display-name>
<facet>
<description>Search Area</description>
<facet-name>searchArea</facet-name>
</facet>
<facet>
<description>Main Area</description>
<facet-name>mainArea</facet-name>
</facet>
<facet>
<description>Info Area</description>
<facet-name>infoArea</facet-name>
</facet>
<attribute>
<attribute-name>pageTitle</attribute-name>
<attribute-class>java.lang.String</attribute-class>
<default-value>Page Title</default-value>
<required>true</required>
</attribute>
<attribute>
<attribute-name>
pageName
</attribute-name>
<attribute-class>
java.lang.String
</attribute-class>
<default-value>
ahmxxyyynnnznn
</default-value>
<required>
true
</required>
</attribute>
<attribute>
<attribute-name>
appVersion
</attribute-name>
<attribute-class>
java.lang.String
</attribute-class>
<default-value>
1.0.0
</default-value>
</attribute>
<attribute>
<attribute-name>
searchAreaPosition
</attribute-name>
<attribute-class>
java.lang.Integer
</attribute-class>
<default-value>
200
</default-value>
</attribute>
<attribute>
<attribute-name>
infoAreaPosition
</attribute-name>
<attribute-class>
java.lang.Integer
</attribute-class>
<default-value>
200
</default-value>
</attribute>
</component>
<af:decorativeBox>
<f:facet name="center"/>
<f:facet name="top"/>
</af:decorativeBox>
</af:xmlContent>
</af:pageTemplateDef>
</jsp:root>

Hi...
Thanks for asking....
As I put in my post before, I include template0 in my template1, as seen in template1 (AHM001):
<af:pageTemplateDef var="attrs">
*<af:pageTemplate viewId="/template/AHM000.jspx">*
I use AHM000 inside AHM001. I use this approach to build many template based on one basic design.
Actually, I don't think the problem is in page template usage because as I submitted paralel to Metalink, I've already not called template0 in template1 but I copy template0's contents to template1.
Unfortunately, page designer show small view and below error messages still occured.
*Jun 7, 2009 10:25:20 PM ComponentMetadataHandler _error*
WARNING: error parsing component tag in file: /AhmTestTemplate-ViewController1-context-root/template/AHM001.jspx/tag:xmlContent/id:null
org.xml.sax.SAXParseException: <Line 115, Column 51>: XML-20100: (Fatal Error) Expected 'EOF'.
Fortunately my application can be run already altough the error message still logged.
Many thanks,
Dominic C.

Hi, We have an application built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1. When we try to download a file(.pvw file) in that application safari throws "Download failed" error. Please suggest what needs to be done.

Hi,
We have an application built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1.
When a file url is clicked instead of asking for Save or Open or Cancel options, the file gets opened on IPad by default.
Is this default behaviour which cannot be changed or can it be configured to ask user preference?
When we try to download a file(.pvw file -> a model file) in the above application, safari throws "Download failed" error.
Please suggest what needs to be done.
Regards,
Pramod

Safari on an iPad in general does not allow downloading of files. That's a safety precaution in the iOS SDK to keep unauthorized content off of iOS devices. Safari will open from the web site file types that it can handle, but direct downloading isn't normal behavior, and I don't believe the behavior can be changed, though you can try asking in the developer forum, either here or the one to which you have access as a member of Apple's iOS developer program.
Regards.

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5
Using Motion 5.0.6 and Final Cut Pro X 10.0.7 on New iMac (December 2012) Mountain Lion,
Intel Core i7 quad-core a 3,4GHz, Turbo Boost fino a 3,9GHz
32GB di SDRAM DDR3 a 1600MHz - 4 x 8GB
Fusion Drive da 3TB
NVIDIA GeForce GTX 680MX 2GB GDDR5
During the rendering of complex FCPX mac crashes and I have to force a restart.
I also happens when I try to export movies with Motion 5.
Does anyone have the same problem with my new iMac?

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

How do I create a master page when using Project7 templates?

Hi,
I am using P7 templates to easily create a nice website. However, I would like to create for example the main menu only once and have it re-used on every page or at least every page I want to. I think this is a called a masterpage (?) where you can tag parts to be re-used on other pages.
Can somebody please tell me where I can find support, examples, tutorials on this? Or can somebody tell me how to do this in a P7 template?
Thanks in advance!!
Robert (Netherlands)

You want to save your project page as a DW Template from which your other site pages will be spawned. Or, you want to use Server-Side Includes (SSIs).
Guidance on when to use DW Templates and SSIs -
http://www.adobe.com/devnet/dreamweaver/articles/ssi_lbi_template.html
More on DWTemplates -
http://forums.adobe.com/message/2032104#2032104
More on SSI -
http://forums.adobe.com/message/2112460#2112460
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

Panel contents overlap when using borderSkin style and layout=absolute

This problem has been reported on several occasions
(http://bugs.adobe.com/jira/browse/SDK-14806)
and there are several articles that talk about this:
http://dougmccune.com/blog/2008/01/17/followup-about-flex-panel-bug/
http://dougmccune.com/blog/2008/01/12/calling-********-on-a-resolved-flex-bug/
I´m not an expert but think I found a fix/workaround for this.
frameworks\projects\framework\src\mx\containers\Panel.as
Must to be changed in the viewMetrics() method.
Line:
973- if (FlexVersion.compatibilityVersion < FlexVersion.VERSION_3_0) 974- {
Replace by:
if ((FlexVersion.compatibilityVersion < FlexVersion.VERSION_3_0) || (getQualifiedClassName(border) != "mx.skins.halo::PanelSkin") || (getStyle("borderStyle") != "default") ) {

Hi Andres, I haven't tried to verify your fix, but would you be willing to fill out a contributor agreement and submit an official patch? Matt On 4/25/08 12:34 PM, "Andres Serral" <[email protected]> wrote: A new discussion was started by Andres Serral in Developers -- Panel contents overlap when using borderSkin style and layout=absolute This problem has been reported on several occasions (http://bugs.adobe.com/jira/browse/SDK-14806) and there are several articles that talk about this: http://dougmccune.com/blog/2008/01/17/followup-about-flex-panel-bug/ http://dougmccune.com/blog/2008/01/12/calling-********-on-a-resolved-flex-bug/ I´m not an expert but think I found a fix/workaround for this. frameworks\projects\framework\src\mx\containers\Panel.as Must to be changed in the viewMetrics() method. Line: 973- if (FlexVersion.compatibilityVersion < FlexVersion.VERSION_3_0) 974- { Replace by: if ((FlexVersion.compatibilityVersion < FlexVersion.VERSION_3_0) || (getQualifiedClassName(border) != "mx.skins.halo::PanelSkin") || (getStyle("borderStyle") != "default") ) { ________________________________ View/reply at Panel contents overlap when using borderSkin style and layout=absolute <a href=http://www.adobeforums.com/webx?13@@.59b51731><a href=http://www.adobeforums.com/webx?13@@.59b51731> Replies by email are OK. Use the unsubscribe <a href=http://www.adobeforums.com/webx?280@@.59b51731!folder=.3c060fa3><a href=http://www.adobeforums.com/webx?280@@.59b51731!folder=.3c060fa3> form to cancel your email subscription.

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

<http://www.thexlab.com/faqs/sbbod.html>

After I installed the recent Apple security patch, I can no longer save PDFs when using Safari. And Firefox no longer can open website PDFs. Any suggestions?

After I installed the recent Apple security patch, I can no longer save PDFs when using Safari. And Firefox no longer can open website PDFs. Any suggestions?

Dansyacht wrote:
If the previous Safari suggestion doesn't work try the following:
In Finder, go to Macintosh HD/Library/Internet Plug-ins and move AdobePDFViewerNPAPI.plugin to the Disabled Plug-ins Folder. Restart Safari. If this works you may just want to delete that FUBAR plug-in.
Thanks. This was the solution for me.
Message was edited by: tvdowntown

In Firefox 3.6.10 I was able to go forward and backwards between pages without the page defaulting to the top of the page. Is there any way to prevent the page from automatically moving to the top when using the forwards and back buttons in Firefox Four?

I like to be able to navigate backwards and forwards without having to scroll down and find where I was previously. In Firefox Four, when using the forwards and back buttons, the page will automatically return to the top of the page. Is there any way to change this setting in Firefox Four to prevent it from doing that?

Thanks for the response. No Time Machine, but I probably have a backup from a few months ago on an external hard drive. :/ I guess it'd have useful history, but not if it overwrote the last 3 months or so of Awesome Bar, that might not be so great.

Performance issues when using Smart View and Excel 2010

Hello, we are experiencing very slow retrieval times when using Smart View and Excel 2010. Currently on v.11.1.3.00 and moved over from Excel 2003 in the last quarter. The same spreadsheets in 2010 (recreated) are running much slower than they used to in 2003 and I was wondering if anyone else out there has experienced similar problems?
It looks like there is some background caching going on as when you copy and paste the contents into a new file and retrieve it is better.....initially. The size of the files are generally less than 2mb and there aren't an expecially large number of subcubes requested so I am at a loss to explain or alleviate the issues.
Any advice / tips on how to optimise the performance would be greatly appreciated.
Thanks,
Nick

Hi Nick,
Office 2010 (32 bit) only is supported.
Also check these documents:
Refresh in Smart View 11.1.2.1 is Slow with MS Office 2010. (Doc ID 1362557.1)
Smart View Refresh Returns Zeros (Doc ID 758892.1)
Internet Explorer (IE7, IE8 and IE9) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
Thank you,
Charles Babu J
Edited by: CJX on Nov 15, 2011 12:21 PM

"Could not complete scan" error when using Windows Fax and Scan

"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
Motorbike

You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Where are my designs stored when using Adobe CC and can i access them if i cancel ?

where are my designs stored when using Adobe CC and can i access them if i cancel ?

This is answered in the CC FAQ: http://www.adobe.com/products/creativecloud/faq.html

HT204291 When using my iPad and playing videos, I only hear the sound. Why will it not show the video?

When using my iPad and playing videos, I only hear the sound. Why will it not show the video? My iPad 2 and iPhone 5 work no issues.

Hi sheilafrommannford,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the links to see more details and screenshots.
Using AirPlay
http://support.apple.com/kb/HT4437
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Cheers,
Judy

If i dont use the display when using the GPS and only listen to the voice instructions can that also makes the iphone overheat even if you dont use the display

because when i use the gps app in my iphone 4s in the car my iphone gets overheat so
if i dont use the display when using the GPS and only listen to the voice instructions can that also makes the iphone overheat even if you dont use the display
will that help?

When you use your GPS does your iPhone get hot enough to shutdown? The reason I ask is that I have run my GPS app with the screen brightness set to near max connected to power for hours. My iPhone got hot, but didn't shutdown.

Cannot download aperture when using trial version and all photo work will be lost if delete trial version

App Store will not download aperture when using trial version and all 30 days of photo work will be lost if delete trial version to be able to purchase Aperture download version??? any ideas?

Your Aperture library is not deleted when you delete Aperture from the Applications folder. Neither are your settings BTW.
Do make certain your library is backed up!

Anychart: Bug when using chart template and Javascript

Similar Messages

Maybe you are looking for