AnyConnect VPN Warning Message
Hi
I have setup AnyConnect VPN and all works fine apart from the warning messages appearing about the server being Untrusted.
I am not too good with certificates so any help will be much appreciated. When I open anyconnect client and click connect, the warning appears then so I click continue anyway to carry on. Then after entering username//password the warning appears a second time and again i click continue and carry on.
We had a wildcard certificate so I installed in on the asa in the CA certificates section, Now the 2nd warning has gone but the first one still appears.
Any ideas???
Thanks
You can simply accept the self-signed certificate the first time you are presented with that message and direct AnyConnect to always trust such certificates.
If you don't want to do that, you need to make your clients automatically trust this certificate from your ASA. You can do that several ways. You mentioned using a 3rd party vendor - that ends up being the method of using a vendor in the trusted root Certificate Authority (CA) list. If you don't use one of the 3rd party ones, you will need to push out the trust via some software deployment method - e.g. a GPO for Windows clients in a managed AD setup or via pre-deploying with yet another 3rd party tool like LANdesk.
If you don't have an internal CA or AD-managed infrastructure for your clients then just telling users to click "always trust" is the path of least resistance (although the least secure).
Similar Messages
-
I had an issue with my Cisco Anyconnect VPN not working, so uninstalled it. I've tried a new install and now I get the message "There is a newer version of the AnyConnect client installed" and it won't tell me install it at all. I've gone through various recommendations on the site included this :-
Go to "Regedit" and search for "Deterministic Networks" and delete it.
HKEY_LOCAL_MACHINE \SOFTWARE\Deterministic Networks
Search with the following keywords in the registry, under "Uninstall" or "Components" folders and delete any related entries.
Vpnapi
Vpngui
Cisco
CVPND
CVPNDRA
Ipsecdialer
Source: https://supportforums.cisco.com/message/3728011#3728011
But I've still got the same problem, and just cant find anything to help !Disable Internet Connection Sharing (ICS) and then try You can disable ICS in two ways:
Per Adapter:
Click the Start button.
Click on Control Panel.
Click on View Network Status and Tasks
Click on Change adapter settings
Right-click the shared connection and choose Properties
Click the Sharing tab
Clear the Allow other network users to connect through this computer's Internet connection checkbox
Click OK
System Wide:
Click the Start button (Windows' orb)
Type: services.msc and press ENTER
Double-Click on Internet Connection Sharing (ICS)
Change Startup Type to Disabled
Reboot the computer
You can now try reinstalling the WiscVPN client again -
Really Need Some Help with CME 8.6 using IOS as Firewall and Anyconnect VPN on Phones
Hello,
I have a 2911 Router with IOS Security and Voice enabled and we are using CME 8.6. I am using a built-in Anyconnect VPN on 3 phones that are for remote users and thus I needed to enable security zones on the router which works because the remote phones will boot up, get their phone configs and I am able to call those remote phones from an outside line.
The issue I am having is that when I try to dial a remote phone connected via the VPN through port g0/0 from and internal office phone, i.e., NOT involving the PSTN then there is no audio. It's as if no audio is going back and forth. When I take off the security zones from the virtual-template interface and the g0/0 interface then the audio works great and I can reach the phone from internal as I am supposed to.
Could someone take a peek at my security config and see why audio would not be traveling through the VPN when I have my security zones turned on?
clock timezone PST -8 0
clock summer-time PST recurring
network-clock-participate wic 0
network-clock-select 1 T1 0/0/0
no ipv6 cef
ip source-route
ip cef
ip dhcp excluded-address 192.168.8.1 192.168.8.19
ip dhcp pool owhvoip
network 192.168.8.0 255.255.248.0
default-router 192.168.8.1
option 150 ip 192.168.8.1
lease 30
multilink bundle-name authenticated
isdn switch-type primary-ni
crypto pki server cme_root
database level complete
grant auto
lifetime certificate 7305
lifetime ca-certificate 7305
crypto pki token default removal timeout 0
crypto pki trustpoint cme_root
enrollment url http://192.168.8.1:80
revocation-check none
rsakeypair cme_root
crypto pki trustpoint cme_cert
enrollment url http://192.168.8.1:80
revocation-check none
crypto pki trustpoint TP-self-signed-2736782807
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2736782807
revocation-check none
rsakeypair TP-self-signed-2736782807
voice-card 0
dspfarm
dsp services dspfarm
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
vpn-group 1
vpn-gateway 1 https://66.111.111.111/SSLVPNphone
vpn-trustpoint 1 trustpoint cme_cert leaf
vpn-profile 1
host-id-check disable
voice class codec 1
codec preference 1 g711ulaw
voice class custom-cptone jointone
dualtone conference
frequency 600 900
cadence 300 150 300 100 300 50
voice class custom-cptone leavetone
dualtone conference
frequency 400 800
cadence 400 50 200 50 200 50
voice translation-rule 1
rule 1 /9400/ /502/
rule 2 /9405/ /215/
rule 3 /9410/ /500/
voice translation-rule 2
rule 1 /.*/ /541999999/
voice translation-rule 100
rule 1 /^9/ // type any unknown plan any isdn
voice translation-profile Inbound_Calls_To_CUE
translate called 1
voice translation-profile InternationalType
translate called 100
voice translation-profile Local-CLID
translate calling 2
license udi pid CISCO2911/K9 sn FTX1641AHX3
hw-module pvdm 0/0
hw-module pvdm 0/1
hw-module sm 1
username routeradmin password 7 091649040910450B41
username cmeadmin privilege 15 password 7 03104803040E375F5E4D5D51
redundancy
controller T1 0/0/0
cablelength long 0db
pri-group timeslots 1-12,24
class-map type inspect match-any sslvpn
match protocol tcp
match protocol udp
match protocol icmp
class-map type inspect match-all router-access
match access-group name router-access
policy-map type inspect firewall-policy
class type inspect sslvpn
inspect
class class-default
drop
policy-map type inspect outside-to-router-policy
class type inspect router-access
inspect
class class-default
drop
zone security trusted
zone security internet
zone-pair security trusted-to-internet source trusted destination internet
service-policy type inspect firewall-policy
zone-pair security untrusted-to-trusted source internet destination trusted
service-policy type inspect outside-to-router-policy
interface Loopback0
ip address 192.168.17.1 255.255.248.0
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description Internet
ip address dhcp
no ip redirects
no ip proxy-arp
zone-member security internet
duplex auto
speed auto
interface GigabitEthernet0/1
ip address 192.168.8.1 255.255.248.0
duplex auto
speed auto
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
no cdp enable
interface Integrated-Service-Engine1/0
ip unnumbered Loopback0
service-module ip address 192.168.17.2 255.255.248.0
!Application: CUE Running on NME
service-module ip default-gateway 192.168.17.1
no keepalive
interface Virtual-Template1
ip unnumbered GigabitEthernet0/0
zone-member security trusted
ip local pool SSLVPNPhone_pool 192.168.9.1 192.168.9.5
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:/cme-gui-8.6.0
ip route 192.168.17.2 255.255.255.255 Integrated-Service-Engine1/0
ip access-list extended router-access
permit tcp any host 66.111.111.111 eq 443
tftp-server flash:apps31.9-3-1ES26.sbn
control-plane
voice-port 0/0/0:23
voice-port 0/3/0
voice-port 0/3/1
mgcp profile default
sccp local GigabitEthernet0/1
sccp ccm 192.168.8.1 identifier 1 priority 1 version 7.0
sccp
sccp ccm group 1
bind interface GigabitEthernet0/1
associate ccm 1 priority 1
associate profile 1 register CME-CONF
dspfarm profile 1 conference
codec g729br8
codec g729r8
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum sessions 4
associate application SCCP
dial-peer voice 500 voip
destination-pattern 5..
session protocol sipv2
session target ipv4:192.168.17.2
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 10 pots
description Incoming Calls To AA
translation-profile incoming Inbound_Calls_To_CUE
incoming called-number .
port 0/0/0:23
dial-peer voice 20 pots
description local 10 digit dialing
translation-profile outgoing Local-CLID
destination-pattern 9[2-9].........
incoming called-number .
port 0/0/0:23
forward-digits 10
dial-peer voice 30 pots
description long distance dialing
translation-profile outgoing Local-CLID
destination-pattern 91..........
incoming called-number .
port 0/0/0:23
forward-digits 11
dial-peer voice 40 pots
description 911
destination-pattern 911
port 0/0/0:23
forward-digits all
dial-peer voice 45 pots
description 9911
destination-pattern 9911
port 0/0/0:23
forward-digits 3
dial-peer voice 50 pots
description international dialing
translation-profile outgoing InternationalType
destination-pattern 9T
incoming called-number .
port 0/0/0:23
dial-peer voice 650 pots
huntstop
destination-pattern 650
fax rate disable
port 0/3/0
gatekeeper
shutdown
telephony-service
protocol mode ipv4
sdspfarm units 5
sdspfarm tag 1 CME-CONF
conference hardware
moh-file-buffer 90
no auto-reg-ephone
authentication credential cmeadmin tshbavsp$$4
max-ephones 50
max-dn 200
ip source-address 192.168.8.1 port 2000
service dnis dir-lookup
timeouts transfer-recall 30
system message Oregon's Wild Harvest
url services http://192.168.17.2/voiceview/common/login.do
url authentication http://192.168.8.1/CCMCIP/authenticate.asp
cnf-file location flash:
cnf-file perphone
load 7931 SCCP31.9-3-1SR4-1S.loads
load 7936 cmterm_7936.3-3-21-0.bin
load 7942 SCCP42.9-3-1SR4-1S.loads
load 7962 SCCP42.9-4-2-1S.loads
time-zone 5
time-format 24
voicemail 500
max-conferences 8 gain -6
call-park system application
call-forward pattern .T
moh moh.wav
web admin system name cmeadmin secret 5 $1$60ro$u.0r/cno/OD2JmtvPq4w9.
dn-webedit
transfer-digit-collect orig-call
transfer-system full-consult
transfer-pattern .T
fac standard
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-template 1
softkeys connected Hold Park Confrn Trnsfer Endcall ConfList TrnsfVM
button-layout 7931 2
ephone-template 2
softkeys idle Dnd Gpickup Pickup Mobility
softkeys connected Hold Park Confrn Mobility Trnsfer TrnsfVM
button-layout 7931 2
ephone-dn 1 dual-line
number 200
label Lisa
name Lisa Ziomkowsky
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 2 dual-line
number 201
label Dylan
name Dylan Elmer
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 3 dual-line
number 202
label Kimberly
name Kimberly Krueger
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 4 dual-line
number 203
label Randy
name Randy Buresh
mobility
snr calling-number local
snr 915035042317 delay 5 timeout 15 cfwd-noan 500
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 5 dual-line
number 204
label Mark
name Mark McBride
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 6 dual-line
number 205
label Susan
name Susan Sundin
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 7 dual-line
number 206
label Rebecca
name Rebecca Vaught
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 8 dual-line
number 207
label Ronnda
name Ronnda Daniels
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 9 dual-line
number 208
label Matthew
name Matthew Creswell
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 10 dual-line
number 209
label Nate
name Nate Couture
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 11 dual-line
number 210
label Sarah
name Sarah Smith
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 12 dual-line
number 211
label Janis
name Janis McFerren
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 13 dual-line
number 212
label Val
name Val McBride
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 14 dual-line
number 213
label Shorty
name Arlene Haugen
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 15 dual-line
number 214
label Ruta
name Ruta Wells
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 16 dual-line
number 215
label 5415489405
name OWH Sales
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 17 dual-line
number 216
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 18 dual-line
number 217
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 19 dual-line
number 218
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 20 dual-line
number 219
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 21 dual-line
number 220
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 22 dual-line
number 221
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 23 dual-line
number 222
label Pam
name Pam Buresh
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 24 dual-line
number 223
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 25 dual-line
number 224
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 26 dual-line
number 225
label Elaine
name Elaine Mahan
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 27 octo-line
number 250
label Shipping
name Shipping
ephone-dn 28 dual-line
number 251
label Eli
name Eli Nourse
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 29 dual-line
number 252
ephone-dn 30 dual-line
number 253
ephone-dn 31 octo-line
number 100
label Customer Service
name Customer Service
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 32 octo-line
number 101
label Sales
name Sales
call-forward busy 214
call-forward noan 214 timeout 12
ephone-dn 33 dual-line
number 260
label Conference Room
name Conference Room
call-forward busy 100
call-forward noan 100 timeout 12
ephone-dn 100
number 300
park-slot timeout 20 limit 2 recall
description Park Slot For All Company
ephone-dn 101
number 301
park-slot timeout 20 limit 2 recall
description Park Slot for All Company
ephone-dn 102
number 302
park-slot timeout 20 limit 2 recall
description Park Slot for All Company
ephone-dn 103
number 700
name All Company Paging
paging ip 239.1.1.10 port 2000
ephone-dn 104
number 8000...
mwi on
ephone-dn 105
number 8001...
mwi off
ephone-dn 106 octo-line
number A00
description ad-hoc conferencing
conference ad-hoc
ephone-dn 107 octo-line
number A01
description ad-hoc conferencing
conference ad-hoc
ephone-dn 108 octo-line
number A02
description ad-hoc conferencing
conference ad-hoc
ephone 1
device-security-mode none
mac-address 001F.CA34.88AE
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:2 2:31
ephone 2
device-security-mode none
mac-address 001F.CA34.8A03
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:12
ephone 3
device-security-mode none
mac-address 001F.CA34.898B
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
ephone 4
device-security-mode none
mac-address 001F.CA34.893F
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
ephone 5
device-security-mode none
mac-address 001F.CA34.8A71
ephone-template 1
max-calls-per-button 2
username "susan"
paging-dn 103
type 7931
button 1:6
ephone 6
device-security-mode none
mac-address 001F.CA34.8871
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:7 2:31 3:32
ephone 7
device-security-mode none
mac-address 001F.CA34.8998
ephone-template 1
max-calls-per-button 2
username "matthew"
paging-dn 103
type 7931
button 1:9
ephone 8
device-security-mode none
mac-address 001F.CA36.8787
ephone-template 1
max-calls-per-button 2
username "nate"
paging-dn 103
type 7931
button 1:10
ephone 9
device-security-mode none
mac-address 001F.CA34.8805
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:5
ephone 10
device-security-mode none
mac-address 001F.CA34.880C
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:14
ephone 11
device-security-mode none
mac-address 001F.CA34.8935
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:3
ephone 12
device-security-mode none
mac-address 001F.CA34.8995
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:8 2:31
ephone 13
device-security-mode none
mac-address 0021.5504.1796
ephone-template 2
max-calls-per-button 2
paging-dn 103
type 7931
button 1:4
ephone 14
device-security-mode none
mac-address 001F.CA34.88F7
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:23
ephone 15
device-security-mode none
mac-address 001F.CA34.8894
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:26
ephone 16
device-security-mode none
mac-address 001F.CA34.8869
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:28 2:27
ephone 17
device-security-mode none
mac-address 001F.CA34.885F
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:11
ephone 18
device-security-mode none
mac-address 001F.CA34.893C
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:27
ephone 19
device-security-mode none
mac-address 001F.CA34.8873
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:27
ephone 20
device-security-mode none
mac-address A456.3040.B7DD
paging-dn 103
type 7942
vpn-group 1
vpn-profile 1
button 1:13
ephone 21
device-security-mode none
mac-address A456.30BA.5474
paging-dn 103
type 7942
vpn-group 1
vpn-profile 1
button 1:15 2:16 3:32
ephone 22
device-security-mode none
mac-address A456.3040.B72E
paging-dn 103
type 7942
vpn-group 1
vpn-profile 1
button 1:1
ephone 23
device-security-mode none
mac-address 00E0.75F3.D1D9
paging-dn 103
type 7936
button 1:33
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
transport input all
scheduler allocate 20000 1000
ntp master
ntp update-calendar
ntp server 216.228.192.69
webvpn gateway sslvpn_gw
ip address 66.111.111.111 port 443
ssl encryption 3des-sha1 aes-sha1
ssl trustpoint cme_cert
inservice
webvpn context sslvpn_context
ssl encryption 3des-sha1 aes-sha1
ssl authenticate verify all
policy group SSLVPNphone
functions svc-enabled
hide-url-bar
svc address-pool "SSLVPNPhone_pool" netmask 255.255.248.0
svc default-domain "bendbroadband.com"
virtual-template 1
default-group-policy SSLVPNphone
gateway sslvpn_gw domain SSLVPNphone
authentication certificate
ca trustpoint cme_root
inservice
endI think your ACL could be the culprit.
ip access-list extended router-access
permit tcp any host 66.111.111.111 eq 443
Would you be able to change the entry to permit ip any any (just for testing purpose) and then test to see if the calls function properly. If they work fine then we know that we need to open som ports there.
Please remember to select a correct answer and rate helpful posts -
I've got a user running:
AnyConnect 3.1.01065
on
Windows 7 64bit.
Several weeks ago she started encountering the following error:
-after logging into Windows and launching the AnyConnect client, she enters her username and password and successfully authenticates.
-the connection is not established and she's presented with the following message: "Failed to install AnyConnect VPN Profile because of file move error. A VPN connection cannot be established."
After doing some troubleshooting, inlcuding uninstalling/reinstalling the anyconnect client, it seems the culprit is the following file:
C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\<filename>.xml. When the problem occurs (which is not regularly, sometimes it occurs daily, sometimes just once a week) examining that file indicates it has no security or permissions set. Quitting the AnyConnect software, modifying the file so that the user has full control of it, then relaunching AnyConnect fixes the problem (until it happens again). Uninstalling, and making sure to move C:\ProgramData\Cisco to the trash, then reinstalling did not seem to help.
The closest match in these forums is the following thread, https://supportforums.cisco.com/message/3760446 - though no clear resolution was given.
Has anyone else encountered this, and been able to fix it?
Thanks much.Just FYI, it seems at least in this case, purging all the previous system restore points seems to have resolved this issue...
-
AnyConnect VPN with Windows 8.1
Has anyone else had issues with the anyconnect vpn client on windows 8.1? I cannot get it to work for the life of me. It will connect and find the gateway, prompt for password, then ask about certificate, the status on the client itself quickly changes to updating software, then blows up and with the failure to connect message...
Any ideas?What I can tell you is that I have Windows 7 64bits and anyconnect works fine. ver 3.1.03103.
If you feel like share the address for the gateway and I will tell you if it ask for autentication. I don't really think the address is critical information.
It's your call. -
Cisco AnyConnect VPN app on iPhone 4s won't connect
I have successfully installed the Cisco AnyConnect VPN app on my iPad Air and can connect to my target VPN. But the same app on my iPhone 4s won't work. When I try to connect I get this message: "Connect using Cisco AnyConnect App at least once before using any other App." I'm not trying to use another app, in fact I closed all other apps. I'm using the same settings as the Air. I tried with wi-fi, turned wi-fi off, location services on and off, etc. I'm on Verizon.
Has anyone got this to work on an iPhone?
ThanksAlthough I agree that this is really a question for Cisco, finding/receiving an official answer there may take a while.
This app worked fine for me until I upgraded today - June 19, 2014 - the date of the release of Version 3.0.09430. After upgrade, I get the same message. The update note says "Apple IOS Connect On Demand Considerations - To ensure proper establish of Connect On Demand VPN tunnels after updating AnyConnect, users must manually start the Any Connect app and establish a connection. If this is not done, upon the next iOS system attempt to establish a VPN tunnel, the error message 'The VPN Connection requires an application to start up' will display."
But I too have tried various interpretations of that, and still get the error above quoted by azmilt.
It appears that either:
- the upgrade is faulty
- the version itself is faulty
- the directions for a proper upgrade need clarification
So if anyone has upgraded to this version, and made it work, I think that providing a procedure would help the community. -
Disable warning message of firewall optionnal
hi ,
i have configured firewall setting ,on concentrator vpn for optionnal and this setting give a warning message one connected on the client vpn ,
i want to disable this warning fro users .
is it possible ?
thank for your help
best regardsthat error is comming for ur Config, So u cannt Skip that message from BAPI returns, try to change CostCenter or Docuent Type.
regards
Prabhu -
Problem using SunRay with Cisco AnyConnect VPN Client
I am using Cisco AnyConnect VPN Client Version 2.5.3046
I have a PC and a SunRay connected to my router. I use VPN to connect my SunRay and my PC to my work computer. My PC works fine, I am able to connect to the internet and also run cisco VPN to connect to my work computer. But when I try to use my SunRay, I get a window on the screen with the message:
VPN IKE Phase 1 agg I msg1This window keeps moving around on the screen. I am not able to connect my SunRay through VPN to my work computer. Any idea what could be wrong and how I can fix this?2.2 is definitely better.
On one PC, I'm fine. On another -- very similar -- it tells me it can't start the VPN even after uninstalling and re-installing and everything else I can think of, with plenty of re-boots inbetween.
Aaaaarrrrrrggggggghhhh. -
I am getting a warning message when i am trying to create a host-named sitecollection.
Hi guys,
I am trying to create a host-named site collection. I have created the root site collection. After that i have tried to create customer root site. I have doing this process with the guidance of this link.
http://technet.microsoft.com/en-us/library/cc424952.aspx#section2a
When i tried to create a customer root site. I am getting a warning message
" WARNING: The port specified for the new host header site does not match any known bindings in the specified Web
Application. The new site will not be accessible if the Web Application is not extended to an IIS Web Site serving
this port."
I couldn't when this warning message comes. I tried to bind the server with webapplication which is created for host-named site collection. No use.
Can anyone help me to solve. And i wanna know why this error message comes!!!
Thanks in advance
Rajendran.First, you shouldn't create a host named site collection on a Web app that has host header named. Doing that implements host names at two different levels and will not work reliably. Second I'm not sure what you mean when you say you didn't
use the FQDN but used just the domain name. A Full url will always be either an FQDN or a shorter Netbios name. If you use a Netbios name it simply assumes the local AD domain of the workstation to create an FQDN as the url There is no way
to use just the domain name. For example, Contoso.com is the domain name. Server.contoso.com or WEbsite.contoso.com are FQDNs. YOu can also use a shorter version that is just server or website, but when those resolve in TCP/IP they would
still resolve using server.contoso.com or website.contoso.com if the workstation where your browser is was in the contoso.com domain. What is the URL for your root site and your host named site?
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
Hi Experts,
In ALV report i am getting warning like
" Field string LS_HEADER is not referenced statically"
Actually i declared this field as "DATA: ls_header TYPE slis_listheader.".
How to correct this warning message.
Thanks in advance.
Thanks,
Madhu.Dear Madhu,
You are not using LS_HEADER statically that you have defined in the program. You will get a warning message since you have defined a field that you have not referenced statically.
Are you using this field dynamically? You can delete/comment the code if you are not using it statically and dynamically.
Moved the thread ABAP forum. Post your queries in relevant forums to get efficient answers.
Regards,
Naveen -
Warning message in BW Report through Portal
Friends,
I really need your help to remove the waring message.
For the purpose of changing the description on the Selection screen from Cost Cetnters (Authorised Values) to Funds Centers I had changed the ZCCTRATI variable description to Funds Centers
Issue:
When we open the old report we see the following information message.
" Value if variable ZCCTRAT1 is automatically converted
I did go to TC RSRT as of Dinesh,Vijay advice ,Just want to know that what message i need to Click .because i could nt find the relevant message
Can u help me how to remove this ?Hi Manohar,
Edit to add: Here I assume you have a Web Application Designer (WAD) report.
You can suppress system and warning messages in WAD. Try this and see if it helps.
- Go to your WAD report
- In the top part of the properties window there is a drop down box. Open this box and select the top level entry there. This should be the name of your report.
- Click Web Item
- Check the following two checkboxes: "Do not Display System Messages" and "Do not Display Warnings".
Hope this helps,
Regards,
Petter
Message was edited by: M Petter -
Error message into warning message KO450
Hi,
There are unsettle RA value in project PAD-9114. Because of this unsettle RA value in the project we are not able to close the project and receiving error message like below:
1.There is still WIP for wbs
2.Balance of wbs is not zero.
There is still WIP for WBS PAD-9114
Message no. KO450
Diagnosis
The WIP for WBS PAD-9114 has not been cleared.
System Response
WBS PAD-9114 cannot be deleted.
Procedure
Calculate the WIP for WBS PAD-9114 so that it can be cleared. Then settle WBS PAD-9114, including the cleared WIP in the settlement.
How to change above error message into warning message so that it will allow us to close the project.
With regards,
V.krishnamoorthyHi,
Thanks for your answer. But still i am receiving the same error
There is still WIP for WBS PAD-9114
Message no. KO450
Diagnosis
The WIP for WBS PAD-9114 has not been cleared.
System Response
WBS PAD-9114 cannot be deleted.
Procedure
Calculate the WIP for WBS PAD-9114 so that it can be cleared. Then settle WBS PAD-9114, including the cleared WIP in the settlement.
With regards,
V.krishnamoorthy -
Standard warning messages in Vendor Request Form
Hi All,
Please let us know, how are the standard warning messages in Vendor Request Form while creation/search are displayed.
For example, I am getting an soft warning message text, at vendor creation which says "Some of the records were not found; for more information, check the log".
Here we don't have any log traces to be checked for, and we have verified the back end record resultset count which is same, irrelevant of the warning message being shown.
These messages are displayed only at two places:
1) The search navigation page, where all the searched record results are displayed and we continue further for creation of vendor workflow.
2) When the workflow of vendor creation is completed, along with the "Workflow has been completed" success message, this warning message is also shown.
I want to know, from where these messages are being populated and how to suppress these messages.
Kindly suggest.
Thanks in advance!
Message was edited by: Oxana Noa ZubarevHi All,
Attaching the screen shot for refernce:
After we click on "continue with create/edit" button, after few details have been entered, the work flow completes.
There are we are getting these error message as highlighted above.
Let me know if any info from my end would help in getting the root cause.
Thanks in advance. -
Jabber for IPhone/IPad and Anyconnect VPN
I have just setup Jabber for iPhone and iPad in a CUCM 8.6/Presence 8.6 enviornment. Works great when on my wireless network at work.
The problem I have is that it doesn't work with Anyconnect VPN. Running 8.4 code and can access the CUPS website from the iPhone/iPad when on vpn. It just will not connect the Jabber clients. I have attached the logs for review.
There is only one difference in our wireless connectivity and VPN connectivity that I can think of at this point. Could it be my DHCP configuration not offering option 150 for tftp on the VPN? I am using a local pool on the ASA but it doesn't offer option 150 for tftp.It's been a while so I don't recall exactly what I did. That said: I want to say that I connected it via the wireless network to let it pull down it's configuration and after it pulled down the initial configuration I was good to go on VPN.
-
While running Firefox, I got a prompt saying their was an update. I did that, but then got another message saying that it was recommended I update firefox to 4.0. I downloaded it, but never received a prompt to drag the image into my applications folder. I also never saw an image of firefox 4.0 on my desktop. Firefox 4.0 was in my downloads folder but got the above warning message when I clicked on it. I tried downloading it again, but the same thing happened. Now what? It appears that Firefox is still running, although I haven't yet tried to go to another website.
Try:
*http://thexlab.com/faqs/resetlaunchservices.html
* http://guides.macrumors.com/Repairing_Permissions
Maybe you are looking for
-
What is the best way to handle specific requirements for loading?
Hello Experts, There are many many loadings to be done for companies and time combinations. For this, I logically think of process chains. However, there are many time conditions to start the loadings pertaining to company calendar. Ideally, I would
-
How to open google search in new tab?
In Leopard you could hit Command and Return, and the search would open in a new tab, this however doesn't work with Snow Leopard. What shortcut can I use to open my google search with a new tab, rather than over the existing page. Thank you.
-
IPhoto-Photoshop question...
I'm making an 8.5 x 11 book in iPhoto, but I want to customize my 8.5 x 11 pages. What size should I make my layout pages in photoshop? Should I make them 8.5 x 11 or does it need a bleed?
-
i am able to put videos on my ipod but there is no sound when i listen to them!!! help please!!!
-
UCCX 7 to UCCX 8 Upgrade Questions
Dear All I have three questions regarding upgrade from UCCX 7 to UCCX 8: 1-Can I upgrade from UCCX 7 single node to UCCX 8 HA? The Document said that I have to Run PUT Tool while both UCCX 7 servers are running but in my case i have only on UCCX 7 Se