Anyone able to run SOAP over SSL with Weblogic 5.1 and without purchasing third party tools??? If so, how???

Anyone able to run SOAP over SSL with Weblogic 5.1??? If so, how??? And
without purchasing third party tools??? Thanks.
-Freddie

Similar Messages

How write rmi-iiop over ssl with weblogic server 6.1 - No server found

//New
Hello,
I have written an appication like this:
- An EJB server running on Weblogic server 6.1
(named: BankServerHome)
-A java client calling the BankServer.
Platform: windows 2000 - jdk1.3
Now I want to secure the communication with SSL protocol.
I have done this:
-generate a key peer with weblogic service named certificate.
-send the CSR to a CA and place the answer into the weblogic
server certificate directory.
-update path for ServerCertificateChainFileName,
ServerCertificateFileName, ServerKeyFileName into config.xml.
-launch weblogicServer
 -> server certificate is recognized
 -> listening port 7001 and 7002.
(-stop weblogicServer!)
At now, all is all right, errors come hereafter:
Then I follow the guideline "Programming weblogic Security" (version of 30/07/2001).
"To use RMI over IIOP over SSL with a Java client, do the following:
2. Extend the java.rmi.server.RMISocketFactory class to handle SSL socket
connections. Be sure to specify the port on which WebLogic Server listens for
SSL connections. For an example of a class that extends the
java.rmi.server.RMISocketFactory class, see Listing 4-22.
3. Run the ejbc compiler with the -d option.
4. Add your extension of the java.rmi.server.RMISocketFactory class to the
CLASSPATH of the Java client.
5. Use the following command options when starting the Java client:
-xbootclasspath/a:%CLASSPATH%
-Dorg.omg.CORBA.ORBSocketFactoryClass=implementation of java.rmi.server.RMISocketFactory
-Dssl.certs=directory location of digital certificate for Java client
-Dssl.key=directory location of private key for Java client"
At step 3. I found into documentation that -d is linked to a directory name.
When I run ejbc with this option -d I have the message:
"ERROR: You must specify an output directory or jar with the -d option to weblogic.ejbc."
% So what option can I use to run ejbc for secure usage?
At step 5. Whatever I write for -Dorg.omg.CORBA.ORBSocketFactoryClass,
this pointed class is not instanciated.
Then I can not create a socket with my client.
The folowing exception is raised:
javax.naming.CommunicationException [Root exception is java.net.ConnectException:
No server found at T3S://localhost:7002]
So, my questions are:
% Why -Dorg.omg.CORBA.ORBSocketFactoryClass must be known by the client and not
the server?
My java client part, managing connection is:
-------------------BEGIN OF CONNECTION MANAGER-------------------
Properties env = new Properties ();
// Shouldn't have to do this, but for now you must
if ( factory.equals ("weblogic.jndi.WLInitialContextFactory") ) {
env.put ("java.naming.provider.url", "t3s://localhost:7002");
InitialContext context = new InitialContext (env);
BankSessionServerHome bssh = (BankServerHome) context.lookup("BankServerHome");
BankServer = bssh.create();
-------------------END OF CONNECTION MANAGER-------------------
I have also try
env.put ("java.naming.provider.url", "corbaloc:iiop://localhost:7002");
but it throws the following error
javax.naming.InvalidNameException: url does not conatin !!!
% What is the code for the java client allowing connection with the ejb?
% And better, can I have a sample example for rmi-iiop over ssl?
(...wlserver6.1\samples\examples\iiop\ejb\stateless\rmiclient\client.java do not
speak ssl!)
Any help will be appreciate from you...
Best Regards.
Oliver

"oliver" <[email protected]> writes:
The SSL support is poorly doc'd right now. We have fixed this and
updated the way you do things in SP2. Please either wait for SP2 or
contact support.
andy
I have written an appication like this:
- An EJB server running on Weblogic server 6.1
(named: BankServerHome)
-A java client calling the BankServer.
Platform: windows 2000 - jdk1.3
Now I want to secure the communication with SSL protocol.
I have done this:
-generate a key peer with weblogic service named certificate.
-send the CSR to a CA and place the answer into the weblogic
server certificate directory.
-update path for ServerCertificateChainFileName,
ServerCertificateFileName, ServerKeyFileName into config.xml.
-launch weblogicServer
 -> server certificate is recognized
 -> listening port 7001 and 7002.
(-stop weblogicServer!)
At now, all is all right, errors come hereafter:
Then I follow the guideline "Programming weblogic Security" (version of 30/07/2001).
"To use RMI over IIOP over SSL with a Java client, do the following:
2. Extend the java.rmi.server.RMISocketFactory class to handle SSL socket
connections. Be sure to specify the port on which WebLogic Server listens for
SSL connections. For an example of a class that extends the
java.rmi.server.RMISocketFactory class, see Listing 4-22.
3. Run the ejbc compiler with the -d option.
4. Add your extension of the java.rmi.server.RMISocketFactory class to the
CLASSPATH of the Java client.
5. Use the following command options when starting the Java client:
-xbootclasspath/a:%CLASSPATH%
-Dorg.omg.CORBA.ORBSocketFactoryClass=implementation of java.rmi.server.RMISocketFactory
-Dssl.certs=directory location of digital certificate for Java client
-Dssl.key=directory location of private key for Java client"
At step 3. I found into documentation that -d is linked to a directory name.
When I run ejbc with this option -d I have the message:
"ERROR: You must specify an output directory or jar with the -d option to weblogic.ejbc."
% So what option can I use to run ejbc for secure usage?
At step 5. Whatever I write for -Dorg.omg.CORBA.ORBSocketFactoryClass,
this pointed class is not instanciated.
Then I can not create a socket with my client.
The folowing exception is raised:
javax.naming.CommunicationException [Root exception is java.net.ConnectException:
No server found at T3S://localhost:7002]
So, my questions are:
% Why -Dorg.omg.CORBA.ORBSocketFactoryClass must be known by the client and not
the server?
My java client part, managing connection is:
-------------------BEGIN OF CONNECTION MANAGER-------------------
Properties env = new Properties ();
// Shouldn't have to do this, but for now you must
if ( factory.equals ("weblogic.jndi.WLInitialContextFactory") ) {
env.put ("java.naming.provider.url", "t3s://localhost:7002");
InitialContext context = new InitialContext (env);
BankSessionServerHome bssh = (BankServerHome) context.lookup("BankServerHome");
BankServer = bssh.create();
-------------------END OF CONNECTION MANAGER-------------------
I have also try
env.put ("java.naming.provider.url", "corbaloc:iiop://localhost:7002");
but it throws the following error
javax.naming.InvalidNameException: url does not conatin !!!
% What is the code for the java client allowing connection with the ejb?
% And better, can I have a sample example for rmi-iiop over ssl?
(...wlserver6.1\samples\examples\iiop\ejb\stateless\rmiclient\client.java do not
speak ssl!)
Any help will be appreciate from you...
Best Regards.
Oliver

How write rmi-iiop over ssl with weblogic server 6.1?

Hello,
I have written an appication like this:
- An EJB server running on Weblogic server 6.1
(named: BankServerHome)
-A java client calling the BankServer.
Platform: windows 2000 - jdk1.4
Now I want to secure the communication with SSL protocol.
I have done this:
-generate a key peer with weblogic service named certificate.
-send the CSR to a CA and place the answer into the weblogic
server certificate directory.
-update path for ServerCertificateChainFileName,
ServerCertificateFileName, ServerKeyFileName into config.xml.
-launch weblogicServer
 -> server certificate is recognized
 -> listening port 7001 and 7002.
(-stop weblogicServer!)
At now, all is all right, errors come hereafter:
Then I follow the guideline "Programming weblogic Security" (version of 30/07/2001).
"To use RMI over IIOP over SSL with a Java client, do the following:
2. Extend the java.rmi.server.RMISocketFactory class to handle SSL socket
connections. Be sure to specify the port on which WebLogic Server listens for
SSL connections. For an example of a class that extends the
java.rmi.server.RMISocketFactory class, see Listing 4-22.
3. Run the ejbc compiler with the -d option.
4. Add your extension of the java.rmi.server.RMISocketFactory class to the
CLASSPATH of the Java client.
5. Use the following command options when starting the Java client:
-xbootclasspath/a:%CLASSPATH%
-Dorg.omg.CORBA.ORBSocketFactoryClass=implementation of java.rmi.server.RMISocketFactory
-Dssl.certs=directory location of digital certificate for Java client
-Dssl.key=directory location of private key for Java client"
At step 3. I found into documentation that -d is linked to a directory name.
When I run ejbc with this option -d I have the message:
"ERROR: You must specify an output directory or jar with the -d option to weblogic.ejbc."
% So what option can I use to run ejbc for secure usage?
At step 5. Whatever I write for -Dorg.omg.CORBA.ORBSocketFactoryClass,
this pointed class is not instanciated.
Then I can not create a socket with my client.
The folowing exception is raised:
javax.naming.CommunicationException [Root exception is java.net.ConnectException:
No server found at T3S://localhost:7002]
So, my questions are:
% Why -Dorg.omg.CORBA.ORBSocketFactoryClass must be known by the client and not
the server?
My java client part, managing connection is:
-------------------BEGIN OF CONNECTION MANAGER-------------------
Properties env = new Properties ();
// Shouldn't have to do this, but for now you must
if ( factory.equals ("weblogic.jndi.WLInitialContextFactory") ) {
env.put ("java.naming.provider.url", "t3s://localhost:7002");
} else {
env.put ("java.naming.provider.url", "rmi://localhost:7002");
InitialContext context = new InitialContext (env);
BankSessionServerHome bssh = (BankServerHome) context.lookup("BankServerHome");
BankServer = bssh.create();
-------------------END OF CONNECTION MANAGER-------------------
% What is the code for the java client allowing connection with the ejb?
% And better, can I have a sample example for rmi-iiop over ssl?
(...wlserver6.1\samples\examples\iiop\ejb\stateless\rmiclient\client.java do not
speak ssl!)
Any help will be appreciate from you...
Best Regards.
Oliver

"oliver" <[email protected]> writes:
First off 1.4 isn't supported as yet. That is probably part of the problem.
You also must use a corba URL from the client in order for this to work for instance:
If you are using WLInitialContextFactory:
corbaloc:iiop:localhost:7001/NameService
If you are using CNCtxFactory:
iiop://localhost:7001
Using rmi: is the wrong thing to do - that will use jrmp or t3.
However, I suggest that you raise a call with support since there is
some other trickiness with getting SSL working. We hope to have this
much improved in SP2.
andy
Hello,
I have written an appication like this:
- An EJB server running on Weblogic server 6.1
(named: BankServerHome)
-A java client calling the BankServer.
Platform: windows 2000 - jdk1.4
Now I want to secure the communication with SSL protocol.
I have done this:
-generate a key peer with weblogic service named certificate.
-send the CSR to a CA and place the answer into the weblogic
server certificate directory.
-update path for ServerCertificateChainFileName,
ServerCertificateFileName, ServerKeyFileName into config.xml.
-launch weblogicServer
 -> server certificate is recognized
 -> listening port 7001 and 7002.
(-stop weblogicServer!)
At now, all is all right, errors come hereafter:
Then I follow the guideline "Programming weblogic Security" (version of 30/07/2001).
"To use RMI over IIOP over SSL with a Java client, do the following:
2. Extend the java.rmi.server.RMISocketFactory class to handle SSL socket
connections. Be sure to specify the port on which WebLogic Server listens for
SSL connections. For an example of a class that extends the
java.rmi.server.RMISocketFactory class, see Listing 4-22.
3. Run the ejbc compiler with the -d option.
4. Add your extension of the java.rmi.server.RMISocketFactory class to the
CLASSPATH of the Java client.
5. Use the following command options when starting the Java client:
-xbootclasspath/a:%CLASSPATH%
-Dorg.omg.CORBA.ORBSocketFactoryClass=implementation of java.rmi.server.RMISocketFactory
-Dssl.certs=directory location of digital certificate for Java client
-Dssl.key=directory location of private key for Java client"
At step 3. I found into documentation that -d is linked to a directory name.
When I run ejbc with this option -d I have the message:
"ERROR: You must specify an output directory or jar with the -d option to weblogic.ejbc."
% So what option can I use to run ejbc for secure usage?
At step 5. Whatever I write for -Dorg.omg.CORBA.ORBSocketFactoryClass,
this pointed class is not instanciated.
Then I can not create a socket with my client.
The folowing exception is raised:
javax.naming.CommunicationException [Root exception is java.net.ConnectException:
No server found at T3S://localhost:7002]
So, my questions are:
% Why -Dorg.omg.CORBA.ORBSocketFactoryClass must be known by the client and not
the server?
My java client part, managing connection is:
-------------------BEGIN OF CONNECTION MANAGER-------------------
Properties env = new Properties ();
// Shouldn't have to do this, but for now you must
if ( factory.equals ("weblogic.jndi.WLInitialContextFactory") ) {
env.put ("java.naming.provider.url", "t3s://localhost:7002");
} else {
env.put ("java.naming.provider.url", "rmi://localhost:7002");
InitialContext context = new InitialContext (env);
BankSessionServerHome bssh = (BankServerHome) context.lookup("BankServerHome");
BankServer = bssh.create();
-------------------END OF CONNECTION MANAGER-------------------
% What is the code for the java client allowing connection with the ejb?
% And better, can I have a sample example for rmi-iiop over ssl?
(...wlserver6.1\samples\examples\iiop\ejb\stateless\rmiclient\client.java do not
speak ssl!)
Any help will be appreciate from you...
Best Regards.
Oliver

Is there a way to have MSOffice-Mac on my MacBook Air sync wirelessly (and non-manually) with iWork on my iPhone without a third-party app?

I purchased a MacBook Air after hearing that it can sync wirelessly with all iOS devices. I then purchased the iWork office for my college courses and found out that the school requires online students like me to use Microsoft Office for Mac. An Apple phone rep explained that this software syncs in read-only mode with the iPhone. Is there really no way - besides third party software like Dropbox, Windows Live SkyDrive, or Docs To Go - for me to sync my homework between iWork on my iPhone and MS Office my new MacBook?

Go through this article: How to back up your data and set up as a new device or do this:
Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
About backups and what's saved:http://support.apple.com/kb/HT1766
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519

Tutorial - How to triple boot OSX, Linux and Windows 8.1 with a shared Data Partition without any third party Win / OSX softwares

This is not a question, but rather a personal guide that has proved to be running successfully.
I would like to thank numerous sources, including Christopher Murphy's suggestions at:
Re: Repairing Boot Camp after creating new partition
Before proceeding, there are certain concepts needs to know:
Why Boot Camp does NOT allow further partitioning of drives after Windows has installed?
Answer: Because the way Apple configures the Mac to be recognized as non UEFI capable system on Windows.
Quote from Christopher Murphy based on the above line:
However, Windows on Macs right now use CSM-BIOS mode in Mac firmware that presents BIOS to Windows rather than EFI. Windows thinks it's on a BIOS computer, and therefore mandates the use of MBR for boot disks, rather than GPT. So that's why we have this hybrid MBR+GPT approach on Mac with Windows on it. You inherit the limitations of MBR, which is four primary partitions.
So what does it means?
It means that OSX + EFI + Recovery HD + Boot Camp partition = 4 primary partitions and thus any attempt to modify the disk will render booting issues of either system.
For more info on GPT (GUID Partition Table disks VS Master Boot Record or MBR in short, you may visit: http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx)
So, how to overcome it?
The general guideline is to install ALL GPT ready OS first then create a Data partition, before installing Windows (Which is again, NOT supported GPT due to EFI configuration by Apple where end-users are not able to modify it).
Interestingly, since Mac Pro 2013 Late supports only Windows 8 and above, thus it is not known if this CSM-BIOS applies to it or not.
Do take note that GPT disks in Windows can only be booted when the system meets the 2 requirements:
http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx#gpt_faq_win7_boot
1) Windows x64 version (Which is a must for newer Macs. If you cannot go to Boot Camp 5, then you need Windows 7 x86 or 32bit version)
2) UEFI system. However, Windows sees all Macs (With the possibility of Mac Pro 2013 Late is an exception. To be determined) as BIOS, or rather NON-UEFI system.
In short, booting on GPT disks is not possible for Mac in Windows.
Summary,
It is tested that a combination of the following will not work:
- OSX + Windows + Linux
- Windows + OSX + Linux
- Windows + Linux + OSX
Usually it can create the system un-bootable or OSX refused to install due to the system does not recognize such partitions and / or Disk Utility refused to format a free space. An example screen-shot is provided below:
The error message is shown as
Title: "Failed to erase volume" Message: "Failed to wipe volume, as an error occurred: MediaKit has reported that the device does not have enough free space to execute the requested operations."
The second thing is about the preparations we need.
1) 1X Windows 7 or 8 DVD or USB thumbdrive
1A) If you uses a DVD to install, you will need another thumbdrive to load the BootCamp drivers for Windows as well as may requires an external DVD drive for newer Macs
2) 1X Linux DVD of your choice. Personally I choose Fedora 20.
So ready? Let's go.
1. Using Disk Utility, shrink the OSX's partition size to what is needed. For me, I give OSX 150GB. Do NOT create any new partition.
Disk Utility should see something like below whereby only OSX partition is left with desired disk space. The remaining space are to be unused disk space for the moment.
Note: Click on the top most item that should start with the size of your HDD / SSD. Then clicked on "Partition" and specify the desired OSX size. Hit "Apply" after that.
2: Download Boot Camp drivers only via Boot Camp Assistant. The USB thumbdrive shall be used later after Linux's installation.
Boot Camp Assistant should see this:
I have only selected "Download latest Windows Support Files from Apple"
3. Insert Linux DVD, reboot Mac into EFI mode (The left most first "EFI mode").
Note 1: Before rebooting, please plugged in an Ethernet adapter because Wi-Fi drivers is not installed.
Note 2: For Thunderbolt adapters, it must be plugged in before reboot as hot-swapping is not supported under Linux. More on the tips at the end of this article.
Note 3: Press and hold "Option" after the screen turns black. Release Option key after you see the image as below:

For the unfortunate part that did not make it on time to edit the images:
9. Install the Windows Support software from your CD/USB drive to gain full functionality of your computer. Reboot and go to Windows again.
Note 1: You may choose to eject disc at this point of time. For Apple SuperDrive users, you will need to wait until the drivers (i.e. Boot Camp support files) is installed and rebooted before ejecting is reasonably possible (As I failed to figured out how to right click without the drivers)
Note 2: Unlike Windows 7 on KBase article TS4599 Keyboard/trackpad inoperative, black screen, or alert messages when installing Windows 7, USB stick can be plugged in after the Windows installation is done. This is because Windows 7 (And probably Windows 7 with SP1 DVD) does not have a built in USB 3 drivers when it was released back in 2009 where USB3 has not arrived then.
Note 3: Due to TPM, Bitlocker is not supported without the use of thumbdrives.
10. Using Disk Management to determine the given drive letter for the DATA partition (DO NOT DELETE and RECREATE partition or else you can goodbye to booting Linux and OSX). Disk Management will not allow you to format it as exFAT / FAT32 in graphical way.
Note: You may remove or modify some of the disk letters in Disk Management. However, do NOT remove / modfify the drive letter for the partition with 200MB size in HFS. This is because it will disallow booting of Linux and neither could Windows nor OSX can do anything EXCEPT to reinstall Linux only.
11. Open Command Prompt in Administrator Mode (Important!!), and key in the following command:
format F: /FS:exFAT
Give this volume a label after it has successfully formatted before hitting "Enter" again.
Note: Mine Data partition was assigned as F drive. Please make necessary adjustment to "F:" should your Data partition is assigned to other letters.
12. After that, Setup your Data partition structure as you like.
Tip: Minimally create the important folders such as:
- Music
- Documents
- Movie (Videos)
- Downloads
- Pictures
All these folders are commonly used by the 3 OSes. I do NOT recommend changing of /home (OSX and / or Linux) and / or user home directory (Windows) either partially or as a whole.
This is because of compatibility issue.
On a side note, iTunes Media Library used in OSX and Windows are NOT able to be use interchangably due to hard-coded path used.
13. Useful troubleshooting in Fedora / Linux:
With references to these:
http://chaidarun.com/fedora-mbp
http://anderson.the-silvas.com/2014/02/14/fedora-20-on-a-macbook-pro-13-late-201 3-retina-display/
http://unencumberedbyfacts.com/2013/08/16/linux-on-a-macbook-pro-101/
I would like to highlight a few important points:
1) Wi-Fi driver:
http://rpmfusion.org/Configuration
Note 1: The sound driver should be installed at Out of Box Experience. However, the Wi-Fi is not.
Note 2: Install both free and non-free repository. By the way, some other software like VLC can only be found after the Free Repository is installed.
Search for "akmod-wl" in Gnome-Package-Installer in order to install Wi-Fi drivers
Note 3: For those who do not have Ethernet adapters and their Mac does NOT have a built-in Ethernet port, it is recommended to get one. This is because Fedora 20 does not have a good support for iPhone USB tethering. Unsure for Andriod / Blackberry / Windows Phone users.
2) Grub Menu:
It will show several options to boot into OSX, even of the capability to boot into x86 or x64 mode. However, neither of them is bootable except Linux and the rescue.
Hence, it is recommended to remove the items by hand in this file:
/boot/efi/EFI/fedora/grub.cfg
Command to be used:
"sudo gedit /boot/efi/EFI/fedora/grub.cfg"
Parts to be removed:
- For any extra kernels, delete the target entry by locating the line "menuentry" under "/etc/grub.d/10_linux" sector to one line above the next "menuentry".
It is recommended to keep one main kernel, and one recovery at the minimal.
- For other OS, delete all the entry (Since neither it can works) under "/etc/grub.d/30_os-prober" sector without removing the lines starts with ###.
Auto Mount exFAT partition:
- After installing extra packages for exFAT support (Since it is not supported by Fedora 20 from a default installation), you may wish to edit "/etc/fstab" in order to mount the exFAT partition during boot time.
Command to be used:
"sudo gedit /etc/fstab"
Add the following line in gedit:
UUID=702D-912D /run/media/Samuel/DATA exfat defaults 1 2
Note 1: For DATA partition, OSX & Boot Camp partition, Fedora defaults mounts under: "/run/medua/<Username with case sensitive>/<Partition Label Name>"
Note 2: UUID is unique ID. You can find out the UUID by:
Step 1: First determine the DATA partition number:
"sudo gdisk /dev/sda"
Step 2: Determine the UUID of this partition number:
"sudo blkid /dev/sda8"
Reference 1: http://manpages.courier-mta.org/htmlman5/fstab.5.html
Reference 2: http://liquidat.wordpress.com/2007/10/15/short-tip-get-uuid-of-hard-disks/
3) Overheating CPU
Solution is to issue the following command in Linux terminal: su -c "echo -n 1 > /sys/devices/system/cpu/intel_pstate/no_turbo"
4) System resumes immediately after suspend
Solution is to issue the following command in Linux terminal: su -c "echo XHC1 > /proc/acpi/wakeup"
5) What does not works well out of box:
- Both GNOME and KDE's fonts are too small to be readable for out of box experience. Additional configuration is a need. (Some of the info can be found on "More Tips" later)
- Thunderbolt hotplugging is NOT supported under Windows and Linux so far. Neither FaceTime HD camera works as well.
- The red light in Headphone jack is always on. I do not have luck in switching off the light without losing the sound.
Note 1: It is determined that the module "snd_hda_intel" is used by both cards (HDMI and normal output)
Note 2: It is also known that blacklisting it can switch off the redlight at the price of muting the system.
Note: Based on this article, http://support.apple.com/kb/TS1574
A Mac (Except Mac Pro) needs servicing when there is a red light while the system fails to detect internal speakers. However, this article does NOT applies to this issue.
5A) More Tips:
Install gnome-tweak-tool for more customization
Search for: "gnome-package" to install:
Install Gnome Package Installer for advanced package repository
Install Gnome Package Updater for advanced updates to be install (Whereby Fedora's App Store alike might not show the relevant updates)
14. Verify if disk is still GPT:
Use Gdisk to determine if the disk is pure GPT:
http://ubuntuforums.org/showthread.php?t=1742682
Command: sudo gdisk -l /dev/sda (The entire hard drive)
You should see the MBR is "Protective" instead of anything else.
15. Congrats, the system is ready for triple boot. (I forgot to eject my Windows DVD when the photo was taken)
Note 1: You cannot set the default startup disk in Linux due to the lack of Boot Camp Control Panel in Linux.
Neither is changing startup disk recommended in Windows due to the inability to display correctly.
For me, I click "Cancel" whenever I am on this tab (Feel free to make other Boot Camp adjustments in other tabs).
Only OSX I know that can show the startup disk options correctly.
Note 2: For some reason, OSX likes to auto mount the EFI partition everytime it boots up. It is not known to have any issue for ejecting other disks or mounting disks via Disk Utility.
Note 3: It is not determined if any Firmware or System upgrades will cause issues. It is only known that all 3 OS's regular updates should not be an issue.
System Updates excludes Mac OSX 10.9.3 updates to OSX 10.9.4 type as I had done it on a OSX 10.9.4 Mac or Windows 8.1 to Windows 8.1 Update 1 since my Windows DVD comes with Update 1.
System Upgrades refers to OSX Mavericks to Yosemite, Fedora 20 to Fedora 21, Windows 8.1 Update 1 to Windows 8.2 / Windows 9 for that matter.
Note 4: Reset SMC and / or PRAM will NOT affect your ability to boot any of the OS (OSX, Recovery HD, Fedora & Windows 8)
Yup, that is it!

If i take my ipod4g(32gb) with a cracked screen and without a warranty to the apple store how much will they charge to fix it?

hey i just dropped my ipod and was wondering how much apple would charge to repair my screen. Some people have said that they do it for free even without a warranty and some say they charge lie 200 to 300 bucks

Sometimes if you make an appointment at the Genius Bar of an Apple store the Genius will exchange it at no cost. It is not coverd by the warranty byt sometimes the Genius will. Otherwise for a 32 BG yu will have to pay $149 for the exchange..

I have an Ipad2, an Iphone 4 . I want to be able to sync both of these with my Windows desktop and Outlook 2007. I would like to sync to and from the Idevices and Outlook.

I have an Ipad2, an Iphone 4 . I want to be able to sync both of these with my Windows desktop and Outlook 2007. I would like to sync to and from the Idevices and Outlook. When I attempt to sync in itunes I get a popup message asking if I want to delete, Merge or cancel. Not wanting to delete of cancel the only option left is Merge.
When selecting Merge all of the entries in outlook are added to the idevice. The next time I merge all of the same entries plus any new ones are added, resulting in older entries being repeated i.e an entry like “John’s Birthday” will appear 5 or 6 times on the same date.
How do I resolve this issue? How do I get the the sync process to add only new entries?

This is a great question. First, facetime will not work because it has to establish a Call connection first. iMessage should work, but how to get it going I am not sure. Two great Apps to try are, Viber and Skype. Viber is excellent, it works over WiFi, you can make free calls and free text messages all over the world with other users who have Viber installed. It does not even have to be open on screen to work. Viber does have to recieve one text message with activation code, to activate it, this will be your only hurdle, but maybe Verizon can help you get that one text message. Skype does have to be open on screen however, but this can function like Facetime with WiFi connection. Definitely get Viber free in App Store, and put it on all your iDevices so the old Verizon iPhone can function as a telephone when on WiFi.

Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up

Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up or crash with the older version. Is this problem being looked into and or being corrected. I use Firefox with Google and my system is XP Pro 32 bit. THIS IS REALLY making me MAD. My email is [email protected] and would appreciate a response to this ASAP. I have tried a couple of items from your help section and nothing works.

'''Anonymous'''
Please post a separate question. Thank you. https://support.mozilla.com/tiki-ask_a_question.php?locale=en-US&forumId=1
'''chris'''
'''''Crashing'''''
See:
http://support.mozilla.com/en-US/kb/Firefox+crashes
http://kb.mozillazine.org/Firefox_crashes
http://support.mozilla.com/en-US/kb/Firefox+crashes+when+loading+certain+pages
http://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it
http://support.mozilla.com/en-US/kb/Firefox+will+not+start
http://kb.mozillazine.org/Browser_will_not_start_up
'''''Hanging'''''
See: http://support.mozilla.com/en-US/kb/Firefox+hangs
'''''Hanging at exit'''''
'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''''Safe Mode'''''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
'''chris'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.~~red:17~~; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)''': your ver. 10.0 r~~red:45~~; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-''In Windows,'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-''In Windows,'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
'''Update Shockwave for Director (aka Shockwave Player)''': your ver. ~~red:10.1 (very old)~~; current ver. 11.5.7.609 (important security update released 2010-05-11; see http://www.adobe.com/support/security/bulletins/apsb10-12.html)
NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
SAVE the installer to your hard drive (Desktop is a good place so you can find it). When the download is complete, exit Firefox (File > Exit), locate and double-click in the installer you just downloaded, let the install complete.
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox#_Installing_Shockwave Installing Shockwave]'''
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

I would like to be able to create a few icons with photos on them and linked to a persons phone number.

Hi, my father is in the middle stages of dementia and having trouble using his new iphone. I would like to be able to create a few icons with photos on them and linked to a persons phone number. This way he can select an icon and it will auto-dial that number. I did some research and an app called SBphotoDial did exactly what I need but it no longer seems to be available in the App Store. Any thoughts?

See Here for iPhoto...
iPhoto: How to move the Library to an EHD
Make sure that the EXT Drive is formatted as Mac OS Extended (journaled).
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.

I am running a MacBook Pro with 10.7.5 and I downloaded the OS X 10.10.2 Update Combo, however when I try and open the package the error message "This volume is used for TimeMachine-backups". Which is not true. I´m using TimeCapsule.

I am running a MacBook Pro with 10.7.5 and I downloaded the OS X 10.10.2 Update Combo.
When I try and open the package after accepting the lincence-agreement and upon choosing the install-volume the error message appears: "This volume is used for TimeMachine-backups".
Which is not true. I´m using a timecapsule for backups.
How can I proceed?

I am using a MacBook Pro (2010) with 2.53 GHz Intel Core i5, 4GB, 1067 MHz, DDR3, Startvolume Macintosh HD.
After downloading the package and starting upgrading it asks acceptance of the license-agreement. After that it asks for the volume were to install. And when I click on the Startvolume Macintosh HD (which is the only available on the machine) it says: "The volume is already being used for Time Machine-Backups".
It doesn´t offer to skip that point or to reconfigure the Time Machine settings.
The point is that my Time machine is not and has never used the Mac HD for Backups. In the past I have used an external drive and since 05/2014 I am using a Time Capsule which is appropriately addressed in the Time Machine settings.

HT4623 Trying to do an IOS upgrade on my Ipad 2. It was running, then came up with an Itunes icon and is just sitting there. I'm not sure what I need to do to get my Ipad back

Trying to do an IOS upgrade on my IPAD 2. It was running then came up with an ITUNES icon and just sits there. How do I complete this upgrade and get my IPAD back??

It sounds like it's gone into recovery mode. How were you trying to update it, directly on it of via your computer's iTunes ? If directly on it then have you tried conencting it to your computer's iTunes ?

How to integrate DRM with third party tool for loading metadata in SQL table

Experts,
I am new to DRM and I have a requirement in which we want to integrate DRM with third party tool(lets say SQL table) as target and load metadata from DRM (Parent node, name , alias etc) to SQL table (same column name)
Is there any way we can integrate DRM to export the same to table directly instead to files. If yes what are the steps we have to follow.
Is there anyway we can customize DRM to execute queries or run batch
Can I have a basic example please.
Thanks in advance,
Regards,

1. Use DRM Export to Table option, for that create an External Connection first for the Target Database and select the respective Tables to which you wish to Export the Hierarchy information.
2. You can perform most of the DRM Actions via the DRM_BATCH_CLIENT.exe.
Please refer to Using the Data Relationship Management Batch Client of DRM User guide.
let me know if you have any issues.

I am wanting to publish a website created in iweb via a third party web host. How do I put a password for anyone wishing to visit the mysite?

I am wanting to publish a website created in iweb via a third party web host. How do I put a password for anyone wishing to visit the mysite?

You create the usernames and passwords where you host your website. Made with or without iWeb.
Usually it's done in the controlpanel where you manage your account.
If you cannot do it there, you'll have to do it yourself. See this post :
https://discussions.apple.com/message/16014940#16014940
And what is the purpose of password protection for ANYONE who vistis your site?

I bought a macbook air and iMac from third party with preinstalled ilife and iworks

I bought a macbook air and iMac from third party with preinstalled ilife and iworks, can I update to the latest ilife and iworks without being charged even though i did not purchase ilife and iworks on my preowned Macs. I have no CD's or license for those products?
thanks

No, you will not be able to do that.

SSL: Portal and Third-Party-Tool

Hello everybody,
I need an advice how to solve the following problem: We integrated a Third-Party-WebTool with the Application Integrator. If we lauch the portal and the special iView with HTTP everything works fine but with HTTPS we get an error message: "Session Management will not work! Please check DSM log files for details. You can turn off this alert inside 'Support Desk' -> 'SAP Application'"
Do I need those logs? Because if I understood the message correctly this deals only with SAP Applications. What about Third-Party-Tools with own SSL certificates? How solve the problem described above? Do I need to import the certificate of my Third-Party-Tool into my portal keystorage? Do I need to configure anything else?
Thanks in advance...
Regards
Steffen

I would be very appreciated if anybody could give me an advice...
Steffen

Anyone able to run SOAP over SSL with Weblogic 5.1 and without purchasing third party tools??? If so, how???

Similar Messages

Maybe you are looking for