Anyone have these problems? Any suggestions please??????

Problem 1: The silver volume control lever fell off the phone. Can I just super glue it back on?
Problem 2: When the phone is being recharged, the battery icon often shows as fully charged even tho its only half charged. I noticed this started happening after I bought a cheap USB cable after original broke. I cant upgrade software cause my phone is unlocked and it may lock it again.

Hondabro wrote:
Problem 1: The silver volume control lever fell off the phone. Can I just super glue it back on?
I'm not sure.
Problem 2: When the phone is being recharged, the battery icon often shows as fully charged even tho its only half charged. I noticed this started happening after I bought a cheap USB cable after original broke. I cant upgrade software cause my phone is unlocked and it may lock it again.
Your hack may be why your battery icon doesn't show the correct charge.

Similar Messages

  • Samplitude 2496 and Audigy 4 sound card problem any suggestions please

    Hello
    I have a problem. I have installed Audigy 4. All looks good. I am editing music in a software called Samplitude 2496. But I simply cannot playback. I beleive Samplitude needs ASIO support to be able to playback. A window pops up when ever I try to playback saying
    "Cannot open waveform output device 'SB Audigy 4[D800]'!
    "The specified format is not support or cannot be translated. Use the capabilities function to determine the supported format".
    I cannot find any ASIO in my system yet Audigy 4 says it has ASIO2 support. Does this mean Audigy software has the ASIO or does this mean I need to download the ASIO for the Samplitude playback.
    Any suggestions most welcome urgently.
    Thank you Philip

    If you have installed Creative bundled drivers for your card, ASIO drivers are installed already. Check on Samplitude Audio settings, if you see those drivers listed there -> NOTE:! you need to select ASIO 24/96 driver for 24/96 data. AFAIK, other (two) CT ASIO drivers supports 6/48 only (least this is the situation w/ Audigy 2).
    You can find more information on ASIO @
    http://forums.creative.com/creativelabs/board/message?board.id=profaudio&message.id=726
    jutapa

  • Anyone have these problems installing Photoshop CS6?

    Aloha! Seems Photoshop CS6 has errors for camera profile installer 6.3 and 7.0.  Error 145: Directory not empty.
    Not sure how that can be an issue with a new install???

    *Aloha  Mylenium!
    Excellent point and since Adobe provides such a less than format I could
    not cut and paste that info from the Adobe Photoshop CS6 error window to
    the Adobe forum window. I figured maybe someone might eventually email me
    so I cut and pasted the error window data to my gmail. That was possible
    but somehow it is not possible on Adobe for the forum.
    Here is "all" the info I have at my disposal that was provided by Adobe at
    the time the Photoshop CS6 install was completed.
    *Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For
    example,  ERROR: DF024, DF037 ... WARNING: DS013 ...

  • Anyone have these problems?

    Enabling lens profiles immediately alters the photo but these steps failto appear in "History" more than half-the-time. Changing the sharpening amount works, but the new value is not displayed until a subsequent correct is made. Finally, I haven't found a way to generate 16-bit output. I certainly iss the box on the Export Page that let you tick this option.

    Hondabro wrote:
    Problem 1: The silver volume control lever fell off the phone. Can I just super glue it back on?
    I'm not sure.
    Problem 2: When the phone is being recharged, the battery icon often shows as fully charged even tho its only half charged. I noticed this started happening after I bought a cheap USB cable after original broke. I cant upgrade software cause my phone is unlocked and it may lock it again.
    Your hack may be why your battery icon doesn't show the correct charge.

  • I an trying to do video editing with iMovie 11  9.0.8, i have no sound. OS X Lion 10.7.5 is my operating system any suggestions Please.

    I am trying to do video editing with iMovie 11  9.0.8 .  I am running OS X Lion 10.7.5   I have no sound,any suggestions please.

    This seems to have fixed the issue: on your desktop, hold down the [OPT] key and click on "Go" in the menu bar; holding down the [OPT] click on Library, find Preferences, and then delete all the files that start with "com.apple.itunes.XXXX.plist" where the "XXX" is whatever other things may exist - as long as they end in "plist". From my experience, preference files are rebuilt by the system after the next restart, so you have very little worry of losing any important data; the worst that could happen )and NOT in this instance, but for other plist files) is that you may have to reset the application "preferences" again when you next start it up, to act or appear in a "preferred" customized way for you.
    Once you delete the .plist files, empty the Trash, and either log out or restart the computer. Once you're back up and operational, start iTunes and your iDevices should reappear in the sidebar (if that's open) and/or at the top of the screen (if that view is enabled).
    Hope that helps. It definitely fixed my problem!

  • I opened a PDFs file that was attached to an email message and now it will not close when I press "Done" as it usually does. Does anyone have a solution to suggest? Thanks.

    I opened a pdf file that was attached to an email message I received and now it will not close when I press "Done" as files usually do. Does anyone have a solution to suggest please? Thanks.

    Try double clicking your home button then force close the stuck PDF by swiping upward. Once you've done that just click the home button again to exit.

  • Hi I have an ipod classic.The problem I have is that the ipod seems to sync new music ok but I have a number of podcasts downloaded and they do not sync to the ipod.Any suggestions please ?

    Hi I Have an Ipod classic.My problem is that the Ipod seems to sync music ok but I have a number of podcasts downloaded to itunes but these don't sync to the ipod,(they have in the past,but no longer). Has anyone any suggestions please ?

    hi gary
    have you tried to sync your ipod ,when you click on the side where it shows your ipod?
    Click on where it shows your ipod name for example garys ipod,when it opens up the summary page click the sync box,bottom right,and see if that helps.
    In the summary page click on podcasts,click the box on sync podcast box (top),read before when the box opens and says are you sure you want sync podcasts.,theres a box underneath,which says automatically include ,make sure thats ticked.
    hope this may help madforit

  • Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

    Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

    Thanks, for info, iPod Classic is a slower machine compared the Nano, unfortunately, if you read these discussions, majority of the freezes involved iTunes 10. Although if might be just slow and some impatient user just disconnect the iPod ands cause more problems. ( Yes I also did that but safely by doing a iPod Hard Reset, before disconnecting).
    Here is the Apple support article that may help you.
    http://support.apple.com/kb/TS1717
    or my usual solution for Windows Users.
    Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
    My suggestion.
    Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
    Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
    Stop the Antivirus program
    Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC, do not use any USB Hub.
    When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
    When Restore complete, eject the iPod and reconnect again.
    Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
    When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
    Good Luck!

  • Hi, I cant open a document I have been working on. It has previously been saved without a problem now all I get is a box stating that the file cannot be opened. Any suggestions please?

    Hi, I reecntly purchased a Mac and the Pages App. But now I find that I cant open a document I have been working on. It has previously been saved without a problem now all I get is a box stating that the file cannot be opened. It is visible in both the Pages Windows and under Recent Items but just will not open. Any suggestions please?

    Hi Colourdoodles,
    Maybe the document is corrupted. Can you open other Pages documents? Preview may open it. Right click (or control click) on the document in Finder and Open With > Preview.
    If that works, Edit > Select All, Edit > Copy. Then paste into a blank Pages document. Formatting may be messed up, but you will have editable text. Then Save (with a different name), close and see if you can open the new document.
    Regards,
    Ian

  • TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    Sorry for the delay...
    I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
    I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
    Thanks for the help, anyway!!

  • I have copied my iTunes library onto a new computer, but when I play back the songs there seems to be random "miss" or "drop out".  No probs with old computer, just the new one.  I'm onto my third new computer - same problem.  Any suggestions please?

    I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record.  Although when I play the same song over again, the "miss" occurs in a different location during the song.  No probs with old computer, just the new one.  I'm onto my third new computer - same problem.  Any suggestions please?

    You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
    There is an alternative version for 64-bit editions of Windows here:
    iTunes 12.1 for Windows (64-bit — for older video cards)
    that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent.  The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer.  The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
    Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8).  It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
    If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

  • Hi. I'm trying to upgrade my 3G iPad 1 software from 3.2.2 to 5.0.1. iTunes tells me to upgrade. It then backs up my iPad Ok but it won't 'restore'. Thus the upgrade fails. Does anyone have any suggestions please?

    Hi. I'm trying to upgrade my 3g iPad 1 software from 3.2.2 to 5.0.1.   iTunes tells me that I need to upgrade.  It then backs up my iPad OK. But then it won't 'restore' and the upgrade fails.
    Does anyone have any suggestions, please.
    Thanks - Dafyd

    The version of iTune for the Mac is not capable of running on an iPad.

  • Hi, I have a macbook pro and when using FaceTime outgoing calls it says connecting but it never connects, however, I can receive incoming calls. Does anyone have any suggestions please?

    Hi,
    I have a macbook pro and when making outgoing calls on facetime I get to connecting but it never does connect, however I can receive incoming calls. Any suggestions please?

    Hey there kakitiga,
    It sounds like you are trying to make a call with FaceTime, it never finishes connecting to the person you are trying to reach. I want to recommend the troubleshooting steps from this article named:
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    If you encounter issues making or receiving FaceTime calls, try the following:
    Verify that FaceTime is enabled in FaceTime > Preferences.If the issue persists, or if you see the message "Waiting for Activation", try toggling FaceTime off and then on.
    Verify that the Date, Time, and Time Zone are set correctly:
    From the Apple () menu, choose System Preferences > Date & Time > Date & Time.
    Enable "Set Automatically".
    Click the Time Zone tab and confirm the closest city is correct.
    Verify that both parties are connected to an active broadband Internet connection.
    See Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection.
    Consult Using FaceTime behind a firewall for necessary ports to open in firewalls, security software and routers.
    If you encounter issues using a Wi-Fi network, use standard Wi-Fi network troubleshooting to resolve interference and other issues.
    Verify the phone number or email address being used is the correct one activated for FaceTime.You can verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website.
    Verify that both parties have installed the latest software updates for their Mac and/or device. See:
    Mac OS X: Updating your software
    iOS: How to update your iPhone, iPad, or iPod touch
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?

    I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?
    wm0203

    Sounds like the CD drive died. Luckily they cost next to nothing to replace. Or get an external LaCie instead. I have a dual G4 1.25 and the CD drive was always so anemic I use a LaCie Porsche with it.

  • My daughter disconnected her iPod nano from the lead before ejecting the device.  It no longer syncs and we have re-set the device, but it now only occasionally appears on the computer screen any suggestions please?

    My daughter disconnected her iPod nano from the lead before ejecting the device.  It no longer syncs and we have re-set the device, but it now only occasionally appears on the computer screen any suggestions please?

    Restoring the iPod will do nothing to his iPhone.
    When you restore it wipes the iPod clean no matter what computer you use.
    The only plus to doing it form your home computer is if you have a backup stored there, then you can restore from the backup once it's done wiping.
    If you are away form your home computer, go ahead and use the computer you have to restore it, then when you get home, you can restore form any backup you may find. You can use this to help you do that when you get there: http://support.apple.com/kb/ht1766

Maybe you are looking for

  • How do I change the weather icon to my local weather?

    I am new to iPhone and have 2 questions: 1. How do I change the wether icon from Cupertino and New York to local weather? 2. How do I remove icons from the home page that came already installed? I tried pressing and holding until they vibrate but no

  • Dip to color dissolve question

    Hi, I am using a dip to color dissolve between clips, dipping to white. My problem is that the pillarbox lines are also dipping. Is there any way to avoid this? Thanks.

  • How to limit the search scope in single site collection for SP2013?

    On our SP2013 farm, there is one web application and 4 site collections under it. At the beginning I was trying to setup 4 different "Content Sources" but Sharepoint warn me that I can only setup 1 source per web application. I don't want user search

  • HTML file in a table

    I am a photographer - I use lightroom to create html browsers for my clients. These files are posted in a the web with unique URLs. I have created seperate HTML file in Dreamweaver that contains indexes to these URLs for clients to scroll through. Wh

  • N95 8GB unable to reset using shortcuts or codes

    Every time I switch my N95 on I get a message saying new time zone found, when the alarm goes off in the morning the handset switches itself off and then switches back on again, the speech quality if very poor and there are also a couple of other min