Anyone use funambol? Want to write a PKGBUILD for it

Hi all,
Anyone here uses funambol? Its open-source but distributed in binary. I was thinking it'd be good to have an Arch (AUR) package for it. Of course, having the PKGBUILD simply unpack the binary distribution isn't optimal, was thinking of an /etc/rc.d script + /usr/bin links at least, as well as a 'fix' for the 32-bit included JVM issue.
Anyway, I just found this software yesterday, and don't even have it working (as in syncing properly) yet. Would someone who uses it respond here, so I know what would be needed to make a good package for this?

bharani wrote:
ngoonee wrote:
I've got a basic funambol setup working (syncing contacts, calendar, and todo between my palm and Evolution).
The PKGBUILD basically dumps stuff in /opt/Funambol currently. Next is to write up the /etc/rc.d/funambol (shouldn't be too hard) and figure out what sort of .desktop files are needed (probably just the admin utility).
Does anyone know if funambol has support for multiple calendars per user? Or do I have to create a new user for each calendar (and sync separately...)?
Its great that you have it working. i gave up after reading the manual. I think there is a need to change a configuration file for java home in arch 64 bit (the binary file is being bundled with 32 bit jre).
Not a change in configuration file, just rm the folder and ln -s your current java there.
Here's an initial PKGBUILD. No makedepends that I'm aware of (its just cp, rm, ln, chmod). This gives you a working funambol, configuring and stuff is up to the user.
The todo list from the previous post is still undone though .
# Maintainer: Ng Oon-Ee < n g o o n e e AT g m a i l . c o m >
pkgname=funambol
pkgver=8.0.2
pkgrel=1
arch=(i686 x86_64)
url="http://www.funambol.com"
license=('AGPL3')
#makedepends=('db>=4.7' 'popt' 'libcups' 'acl' 'libldap' 'libcap>=2.16' 'heimdal>=1.3.1' 'pam' 'fam' 'gnutls>=2.4.1')
#options=(!makeflags)
depends=('java-runtime' 'python')
source=(http://download.forge.objectweb.org/sync4j/${pkgname}-${pkgver}.tgz)
md5sums=('54a5f1e50dd51b4282046f824b986a72')
build() {
cd ${srcdir}/Funambol/
install -dv -m755 ${pkgdir}/opt/
# Copy Funambol files to /opt/Funambol
cp -a ${srcdir}/Funambol/ ${pkgdir}/opt/
# Removing built-in JRE, use system JRE
rm -Rf ${pkgdir}/opt/Funambol/tools/jre-1.5.0/
# Use system java libs
ln -s /usr/lib/jvm/* ${pkgdir}/opt/Funambol/tools/jre-1.5.0
# hack to prevent a whole lot of prompts for removing write-protected file
chmod -R 644 ${srcdir}/Funambol/tools/jre-1.5.0/jre/

Similar Messages

I want to write a plugin for import/export in adobe illustrator cs6 my document is web type(profile)

hi ,
I want to write a plugin for import/export in adobe illustrator cs6 my document is web type(profile).
so please suggest to me in which language i need to write this(c#/c++/VC++).
or if u have any suitable example /link share with me

http://forums.adobe.com/community/illustrator/illustrator_sdk?view=discussions
And provide more details. Nobody can even begin to advise based on such vague info.
Mylenium

Has Anyone Used the WD My Book External Drives for Time Machine?

I'm thinking of getting the Western Digitial 1 or 2 TB My Book (Pro Edition 2 or Studio Edition) External Drives for use with 2 MacPros. Has anyone used these and could I use them with Time Machine? Would I have to reformat them for Time Machine?
Thanks!
Ashley

You may, and probably want to format them, even if not TM use, I would anyway. Not everyone is happy with MyBook Pro and TM.
I buy bare FW devices and add disk drive of choice, or just use OWC
http://www.macsales.com/firewire and works well.
FW800 is also better on the new Mac Pro
http://www.barefeats.com

Use windows, want MAC, write openGL applications

Hello,
Apparently I am still a fool in using a MAC and i don't have a
clue about using it but i want to buy such a thing.
2 Problems:
I am a hobby programmer of OpenGL and want to know wether programming MAC application is like (with "like" i don't mean "exactly like" of coure) Win32 API. Ok, All I want is creating
OpenGL applications on MAC. Is this a big problem for a young guy like me?
Next:
I am using much Win32 Apps like Milkshape3D (for OpenGLprogramming). Are there similar Apps on Mac which effect exactly the same or are there Win32 emulatoren on which WinApps can be ran on Mac.
I know i am a fool, please don't mention it in your answers again
Thx for all!

Hi,
Writing OpneGL programs on the mac will be no problem for a young guy like you. Hillegass's book has an example OpenGL/Objective-C program in it. There are quite a few examples on the Apple ADC example code pages too (it's worth joining ADC - there is a free membership option which is good enough for hobbyists like me). I'd recommend learning Objective-C to program OpenGL stuff - nothing beats Objective-C in my opinion (it might even wean you off OpenGL - have a look at quartz 2d and core image). You'll be using Xcode as the IDE - it's good, powerful and easy to use.
As I don't use a pc I can't say anything about your second question except dump the pc, it's holding you back...
Cheers,
MrFluff

Which jar to use in order to write add-ons for IE

Hi,
I don't know whether I am asking the correct question but I want to know can I use any jar in order to create add-ons for Internet explorer and, if any, which one?
thanks

Hi Akshay,
I have used the FM "ISU_DB_EANL_UPDATE" in my project.
CONSTANTS lc_modify TYPE c VALUE 'U'.
CALL FUNCTION 'ISU_DB_EANL_UPDATE'
    EXPORTING
      x_eanl          = xw_eanl
      x_eanl_old      = xw_eanl
      x_upd_mode      = lc_modify
    TABLES
      xt_eanlh_update = xt_eanlh_mod
      xt_eanlh_old    = xt_eanlh_old.
where eanl is the entry in EANL table.
OLD_EANLH contains the old entry line item of the Rate Category table and NEW_EANLH contains the new line item to be added. This is the crude way of doing this. But I didnt find any other FM useful.
But this works.
Hope this also resolves your query.
Regards,
Manish
Edited by: Manish Bisht on Jun 29, 2009 3:43 PM

Anyone used 'Le French mobile' or 'Maxroam' Sim for data r

I just wondered if anyone has travelled to France recently and used 'Le French Mobile' or Max Roam sims for their mobile data. I've been reading that getting a French Sim from SFR is probably the cheapest way to do it but where I'm going is quite rural and not sure so would like to sort a sim out before I travel. From what I can see €20 gets you a micro Sim & €15 of credit which yo can then convert to Data. Sounds a bit

Hi, I have been using LeFrenchMobile for quite some time now and I find it useful. To top up, it's very easy, just through their website and then you can either keep it or convert it into data. About the signal, it worked well for me when i was around Dax. I recommend it

Anyone using GoPro Cineform Studio as free substitute for Neoscene?

Folks,
I've not been reading here for several months, so please excuse me if I repeat a prior thread. I did a search and didn't find one spot-on.
GoPro, makers of that small fixed-focus HD camera for the sports and outdoor photography crowd, has bought up Cineform. Like I say, this is news to me as of this week but not exactly news. GoPro makes a casing that allows use of two Hero HD cameras to capture 3D, in a sense. As you'll have two cameras, you'll get two separate video files and separate audio that is blended in software. From what I gather, GoPro found the casing worked great but then they had no good way to finish out the 3D software side of it. It seems that GoPro decided Cineform was a ripe choice for acquisition.
This might have a really nice benefit to those of us with underpowered CPU's in our rigs and AVCHD cameras. Instead of spending $130 on Cineform Neoscene to transcode the AVCHD files to a CPU-friendly Cineform intermediate codec, it looks like we can use the free Cineform Studio software to do the job.
I've been kicking around on the 'net this week to see if this is actually plausible. Here and there people mention doing it, but not often in connection with PPro CS5.
So - is anyone here on the forum using the free Cineform Studio to transcode their AVCHD files to the Cineform codec, as they might have with Neoscene? Are you getting the same benefits: improved 422 colorspace, lighter CPU load, etc?
I have a Canon T2i DSLR and an AMD Phenom II 955 CPU rig. Any help I can get for this non-Intel processor would be sweet.
http://gopro.com/3d-cineform-studio-software-download/
http://gopro.com/3d-hero-system-how-it-works/

Personally I'm not sold on it, cs5.5 handles raw h.264 really well in my opinion and I am the type of person that is against re-encoding a file more then you have to. Not to mention the cinaform file that get's spit out is huge so you have to cut and export a million times and it takes forever. If you have the time have fun with that, presonally I would rather get a more powerful computer before I started recompressing files just to make them work in cs5 or elements just becuase my computer blows. Even with CS3 I would just change the raw h.264 extension to .mov and deal with it so yea. Maybe if they expanded it into an editor that actually had a timeline then I could see people really starting to use it, until then I only use it for some color correction and updating my hero2 since I am forced to have cinaform to get firmware updates?
And I even have the same processor as J.elliot, a quad phenom 955 not over clocked or anything with 8gigs of memory and raw gopro video plays fine in CS5.5. Converting codec from a canon t2i camera might be the only thing it is really useful for although I would imagine getting the right codec for premiere would probably be the right solution instead of re-encoding. I searched and the t2i uses .mov and it's hard for me to imagine premier not accepting .mov files when it now supports h.264? I guess in cs4 you just had to rename the .mov to .mp4 so why do all the extra work with cineform and why does someone get a correct answer for agreeing with you?

Anyone using Classroom in a Book, AS 3 for Flash CS4? ...lesson 11

I'm doing the tuts in this book, and have run into a problem. Lesson 11 deals with using AS3 and components to control video. Specifically, to create an XML video playlist that starts a new video upon completion of the previous one.
Well, I can't get it to work. It doesn't seem to be able to find the XML playlist or something. Even the file in the "completed" folder that comes with the book suffers the same problem.
This is pretty aggravating. Any help would be appreciated.
Graham

Lorin,
What I call an endpoint is just one of the anchorPoints at the end of an open path.
I'm not sure where you're having trouble, so do this simple exercise:
First, set your current fill to none, and your current stroke to black.
1. Line tool: Drag to draw a line. Do that again, so you have two separate lines.
2. Get the white pointer and deselect everything. (Just click somewhere in the white space of the page.)
3. Now, with the white pointer, click the very end of one of the lines to select it.
4. Press and hold the Shift key. Click one of the ends of the other line. Now you should have two anchorPoints selected, one on each line.
5. Object>Path>Join. A new segment connects the two selected anchorpoints, and what were two paths are now one path with three segments.
That's joining two open paths by selecting endpoints. Now do this:
6. Deselect.
7. Black pointer: Select the path. Note that the whole path is selected, because you clicked it with the black pointer.
8. Object>Path>Join. A new segment connects across the ends of the path, making what was an open path a closed path.
That's using the Join command to close a path without having to select its endpoints.
Does that make sense? Now experiment doing that with some other paths until the results are predictable to you. Then do this:
9. Scissor Tool: Click the middle of one of the segments of the path to cut it. Deselect.
10. White Pointer: Drag a marquee selection
around the place where you cut. That means don't click on the points or the path, but drag a dashed selection "box" (selection marquee) around the place where you know the cut is, like this:

Writing PKGBUILDs for Go programs.

Hello.
I was thinking in starting maintaining a few packages in the AUR, so decided to write a little test.
Let's say I want to write a PKGBUILD for this package: https://github.com/michaeldv/mop
Now, this is written in the Go language, and as some of you might know, go uses the great 'go' tool, which allows you to quickly fetch a project and install it.
So I was wondering which would be the correct way to install this, as Go specifies that all the programs must be stored in $GOPATH.
I also have no idea how to install it properly.
For example, a PKGBUILD for this program would be:
pkgname=mop-git
pkgver=20130907
pkgrel=1
pkgdesc='Command-line utility that displays information about stock markets (development version)'
url='http://github.com/michaeldv/mop'
license=('MIT')
source=('git://github.com/michaeldv/mop.git')
md5sums=('SKIP')
sha1sums=('SKIP')
sha256sums=('SKIP')
arch=('i686' 'x86_64')
depends=()
makedepends=('git' 'go')
conflicts=()
provides=()
build() {
go get github.com/michaeldv/mop
cd $GOPATH/src/github.com/michaeldv/mop
make build
package() {
cd $GOPATH/src/github.com/michaeldv/mop
# Install the program.
cp mop /usr/bin
As you can see it's very simple, and the Go command clones the repo and builds it automatically.
So I ask you, is this the correct way to do this? There aren't a lot of Go packages in the AUR to learn from, but most of PKGBUILDs seem to do this in another way, and I wonder why.
Thanks.
Last edited by dysoco (2013-09-17 23:00:21)

I know nothing about go or creating PKGBUILDs, but there are guidelines in the wiki: https://wiki.archlinux.org/index.php/Go … Guidelines

Re: (forte-users) Anyone used Semaphors in Forte ?

Jean-Paul,
I'm not sure what behaviour you are trying to implement with semaphores.
In Forté, the Mutex type is an implementation of a mutual exclusion
semaphore.
If that's all you need, then using Mutex would be the smartest way to
implement a semaphore.
Is that sufficient or are you looking for some other semaphore flavor?
Daniel Désy
BORN.
----- Original Message -----
From: "Jean-Paul Gabrielli" <Jean-Paul.Gabriellisema.fr>
To: "000Forte-Users" <forte-userslists.xpedior.com>
Sent: Tuesday, December 19, 2000 7:37 AM
Subject: (forte-users) Anyone used Semaphors in Forte ?
Hi,
Looking for the smartest way to implement semaphrs in Forte.
Have you experienced such a use ?
thanks
j-paul gabrielli
sema
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a
new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Jean-Paul,
I'm not sure what behaviour you are trying to implement with semaphores.
In Forté, the Mutex type is an implementation of a mutual exclusion
semaphore.
If that's all you need, then using Mutex would be the smartest way to
implement a semaphore.
Is that sufficient or are you looking for some other semaphore flavor?
Daniel Désy
BORN.
----- Original Message -----
From: "Jean-Paul Gabrielli" <Jean-Paul.Gabriellisema.fr>
To: "000Forte-Users" <forte-userslists.xpedior.com>
Sent: Tuesday, December 19, 2000 7:37 AM
Subject: (forte-users) Anyone used Semaphors in Forte ?
Hi,
Looking for the smartest way to implement semaphrs in Forte.
Have you experienced such a use ?
thanks
j-paul gabrielli
sema
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a
new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Using ALEKS with Mac (math class review for college)

Hi. I'm taking a math review class for college, and it's online. They want me to do it through something called ALEKS. Has anyone used this before? I've paid for the class, and tried downloading what they wanted me to download, but I got this error message:
An error occurred during installation.
This installer is not allowed to write files in your Java Plug-in lib/ext directory.
When I clicked the error link, it said:
mework/Versions/1.5.0/Home/lib/ext/test.tmp (Permission denied)
Error #12: Error UseS_IP : 2, java.lang.Exception: sudo return 1
Error #13: Error UseS_P_IP : 0, java.lang.Exception: Password null
Info
I've sent email to my professor, and to the ALEKS company about it, and I'm sure they'll respond. I just wanted to try asking here, in case anyone had done this before and knew what to do.
Thanks.
Hope everyone had a good Easter/Spring Break/etc..
Penelope

Did you follow the instructions here?

Help to create a pkgbuild for harpia

hi i want to create a pkgbuild for the harpia program http://s2i.das.ufsc.br/harpia/en/home.html
searching in the aur and in the net i couldn't find something
harpia exist for ubuntu and the .deb file is hosted here http://packages.ubuntu.com/oneiric/all/harpia
can someone help me create a working pkgbuild for arch through the .deb file
i tried to create a first approach by creating the following PKGBUILD:
pkgname=harpia
pkgver=1.1
pkgrel=1
pkgdesc="Image Processing/Computer Vision Automatic Prgm. Tool"
arch=('any')
url="http://s2i.das.ufsc.br/harpia/en/home.html"
license=('GPL2')
depends=('')
source=("http://archive.ubuntu.com/ubuntu/pool/universe/h/harpia/${pkgname}_${pkgver}-0ubuntu1.1_all.deb")
md5sums=('56c6cb146ea5652e41b77506ad8ec263')
build() {
bsdtar -C "$pkgdir" -xvf data.tar.gz
however when i am running the program i am taking the following error:
Traceback (most recent call last):
File "/usr/bin/harpia", line 32, in <module>
from harpia import harpiagcfrontend
ImportError: No module named harpia
i guess that the problem might have to do with some dependencies or with the python library, can you provide me with some tips
thanks

Well, I'm not going to tell you every little thing .
I found a likely candidate for python-gnome2 in pacman using a judicious choice of search terms. As for the rest, I suggest you go to the Debian or Ubuntu package lists. The Debian ones are easy to find in Google. These lists contain lots of information about what packages contain and what they provide and where the source code is from.
Do some detective work, you will figure it out.

How can i write properties file for Hindi font

Hi All,
i'm using jdev 11.1.1.5.0
in my use case i have worked on internationalization where i want to use hindi font
like this link -
Majid Hussain: Internationalization of ADF 11.1.1.3 Applications
as in above post majid used german language and write properties file for german language(which is using english character).
but my problem is that i want to use hindi language
so how can i write propery file which support hindi font.
Manish

Hi Manish,
We also had same requirement where we need to show indian local language(Hindi ,Bengali and many more ).
We had implemented following approach and perhaps it will helpful for you.
1-First we changed the encoding value in jdeveloper.
go to jdeveloper --> tools --->preference-->encoding , select to UTF8
2-We used to get the properties and it's translated value from business and then we were manually put these pair into related resource bundle.
And using this we were able to implemented multilanguage support.
Thanks
Prateek

Hi there, can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac Mini? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? Thanks in advance, Grtz T.

Hi there,
Can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac mini i7 using an Apogee jam as an input for bass and a Behringer USB DAC with RCA audio output? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? I'm also suffering massive audio lag issues with the Apogee jam after waking the mini from sleepmode, wich pretty much renders it useless.
Thanks in advance,
Grtz T.

I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
The HDMI Detective should solve your handshaking problems.

I want to write a script or Automator workflow/app that emails a random shortcut of the day to three recipients. The source is from an Excel spreadsheet. One column is the shortcut, and the second column is the definition. Anyone have experience?

I want to write a script or Automator workflow/app that automatically emails a random shortcut of the day to three recipients. The source is from an Excel spreadsheet. One column is the shortcut, and the second column is the definition. Anyone have similar experience and know that this would work?

I have had a first stab at the script, below. It uses a file to store the shortcuts and command [descriptions]. You should be able to see from the script annotations how to add a new one. (I populated 1-4 with real data, but got lazy after that, so you have a few placeholders to work with first.
As I have noted, once you are happy that you have all the data in the file, you can comment out part of the script for ongoing use. (BTW, my reluctance to use Excel is that I don't currently have it installed and I don't want to offer wrong advice. If you have Numbers, I do have that and could probably modify to work with a spreadsheet from there. This might be especially useful if you have the data already sitting in Excel.)
A few things came-up whilist I was writing the script:
1.     Currently, all recipients will not only get the same tip at the same time, but they will see the names and email addresses of the others who receive them. It is possible to modify this.
2.     I have added a property gRandomCheck which keeps track of which shortcut has already been used (since the last time the script was compiled. This will prevent the same tip being sent more than once.    When all tips have been sent once, the script will alert you and not send anything until reset. It does not check on a per-addressee basis (which would be a refinement). (If you add a new addressee at this stage, the whole process will start again, and you may not really want this to be the behaviour.)
3.     The way that I have built the list, commandList, is deliberately cumbersome - it's for the sake of clarity. If you prefer, you can construct the whole list as {{shortcut:"X", command:"X"}, {shortcut:"Y", command:"Y"}}
Have a look - I am sure you will have questions!
SCRIPT STARTS HERE Paste the following lines (thru the end) into a new AppleScript Editor document and press RUN
--The property gRandomCheck persists between runs and is used to stop sending the same hint twice.
property gRandomCheck : {}
--I am defining a file on the desktop. It doesn't have to be in this location
set theFolder to path to desktop
set commandFile to (theFolder as text) & "CommandFile.csv"
--(* Unless you need to change the file contents you do not need to write to it each time. Remove the "--" on this line and before the asterisk about 18 lines below
--Follow this format and enter as many records as you like on a new line - each with a unique name
set record1 to {shortcut:"Z", command:"Undo"}
set record2 to {shortcut:"R", command:"Record"}
set record3 to {shortcut:"⇧R", command:"Record Toggle"}
set record4 to {shortcut:"⌘.", command:"Discard Recording & Return to Last Play Position"}
set record5 to {shortcut:"X", command:"x"}
set record6 to {shortcut:"X", command:"x"}
set record7 to {shortcut:"X", command:"x"}
set record8 to {shortcut:"X", command:"x"}
set record9 to {shortcut:"X", command:"x"}
set record10 to {shortcut:"X", command:"x"}
set record11 to {shortcut:"X", command:"x"}
set record12 to {shortcut:"X", command:"x"}
set record13 to {shortcut:"X", command:"x"}
--Make sure you add the record name before randomCheck:
set commandList to {record1, record2, record3, record4, record5, record6, record7, record8, record9, record10, record11, record12, record13}
--This part writes the above records to the file each time.
set fileRef to open for access commandFile with write permission
set eof of fileRef to 0
write commandList to fileRef starting at eof as list
close access fileRef
--remove "--" here to stop writing (see above)*)
--This reads from the file
set fileRef to open for access commandFile with write permission
set commandList to read fileRef as list
close access fileRef
--Here's where the random record is chosen
set selected to 0
if (count of gRandomCheck) is not (count of commandList) then
          repeat
                    set selected to (random number from 1 to (count of commandList))
                    if selected is not in gRandomCheck then
                              set gRandomCheck to gRandomCheck & selected
                              exit repeat
                    end if
          end repeat
else
          display dialog "You have sent all shortcuts to all recipients once. Recompile to reset"
          return
end if
--This is setting-up the format of the mail contents
set messageText to ("Shortcut: " & shortcut of record selected of commandList & return & "Command: " & command of record selected of commandList)
tell application "Mail"
--When you're ready to use, you probably will not want Mail popping to the front, so add "--" before activate
activate
--You can change the subject of the message here. You can also set visible:true to visible:false when you are happy all is working OK
          set theMessage to (make new outgoing message with properties {visible:true, subject:"Today's Logic Pro Shortcut", content:messageText})
          tell theMessage
--You can add new recipients here. Just add a new line. Modify the names and addresses here to real ones
                    make new to recipient with properties {name:"Fred Smith", address:"[email protected]"}
                    make new to recipient with properties {name:"John Smith", address:"[email protected]"}
--When you are ready to start sending, remove the dashes before "send" below
--send
          end tell
end tell

Anyone use funambol? Want to write a PKGBUILD for it

Similar Messages

Maybe you are looking for