Anyone use hypersonic 2 and logic express 9?

anyone use hypersonic 2 and logic express 9?
Message was edited by: Kajun Muzik

Actually I have found a way for at least the instrument plug ins to be accessed.
I was able to set up an instance of Sculpture in MS2 and record it in LE using Soundflower.
Route the audio from MainStage to Logic and record onto an audio track in Logic as follows:
If not already installed, get SoundFlower. After installing it.
A) Setup the sound you want in MS2 and audio output to Soundflower (remember to Apply Changes or it does not hold).
B) In Logic Express set the audio input to Soundflower and create a new audio track for recording. Important: set Soundflower's audio output to however you listen to your audio or you won't hear anything.
C) Press RECORD and start playing, LE captures Mainstage's sound.
I have not tried to wire LE's output to MS2 to take advantage of Space Designer. but since this functions, I'm not sure why that couldn't work as well. It is still flipping though a few screens though...might just be easier to get Logic Pro from the App store....

Similar Messages

Anyone Using PC and Logic with hypersonic ?

by this time i should be on mac, yeah i know but my PC still works and i can still make music
but I was wondering if hpersonic supports multiple output on mac and how well does it run
because i'm thiking of upgrading to a mac and also thinking of getting hypersonic 2 upgrade
does it work with logic 7?
is there something similar to hypersonic or better?
hypersonic happens to be the backbone of all my songs
thanks

its pretty simple
there is few ways of doing this
one is the analog way :
1: connect a midi output from the mac to a midi input to the PC
2: i assume you have a pro interfaces in both mac and PC, so connect 2 or 4 or 6 channels output of the PC to the mac's audio input
3: Launch both logic and insert an instrument of your choice in any of the instrument channels ( EXS24 OR HYPERSONIC ) then select a midi channel in logic pro 7
4: Make sure what ever channel you have selected is the same channel in logic 5.5 on PC ( example, midi channel one will connect to instrument 1 with the input set to midi ch 1 )
if the input on instrument 1 is set to midi to then it wont receive the info from Midi channel 1's output of the mac unless you choose midi channel 2 just like any rewire
5: set the Instrument 1's output to what ever you want the mac to receive from
so if you set the output to 3-4 then you need to select an audio track and set the input to 3-4 to receive the lines just like logic will receive the channel outputs of reason when its been rewired
the good thing about this is you can have stereo inputs for every channels
6: start playing any key on the midi channel 1 on the Logic 7 (Mac) and it'll control the PC logic with the audio output coming in input 3-4 on any of the audio tracks you select in logic
good thing about this is you insert as much powerful plug-ins as wont because they are not in play mode, the only thing thats been triggered is the sounds from the plug-ins so therefore it does eat as much CPU as having them instrument on logic 7 on the same mac or having reason on the same computer
IMPORTANT NOTE
when bouncing, don't bounce it as off-line because its just having an external sound module, bounce it in realtime
and you change the songs to another songs, save the session on Logic 7 and logic 5.5 just like how you'll do on reason and logic 7
two is digital way :
its the same as the analog ways except the audio out put from the PC to the Mac is connect via ( SPDF )
i hope that sounds a bit simple but if you need more info i'll be glad to help you on that
stash

Hardware compressor and am not quite sure how to use it in logic express 9. Please help???

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not sure how to use it in logic. Please help???

Hi Ujjawal,
Use the Tab-order property of IR object.
In design mode, select the any command button, right click and select the property. you will find the window for "Tab-Order". It lists all the objects available in that dashboard. Here you can arrange the tab order..
Hope it will help you.
Thanks & Regards,
Mohit Jain

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!?

I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!? It is very frustrating as the main reason i have bought a mac is to use logic! Any help would be great as i am a complete novice when it comes to Macs!

You're probably on OS X Lion?
I had the same problem as you. I used Software Update to update Logic Express to the latest version, and then it ran without any problems.

Can I rewire GarbageBand2 and Logic Express 7?

Can I rewire (I mean using the Rewire Program) GarbageBand2 and Logic Express 7? Can either one be master and the other slave? My first guess is that I would like to go as far as I can with GB2 as the master and then make Logic Express 7 the master and create a multi-tempo song with perhaps other editing possible through Logic Express.
LuckyMan
PBG4 17 Mac OS X (10.4.2)

I got into garageband because, I, a songwriter, have a song for which I want to make a good demo. I am still trying to learn GarageBand. I would stay with GarageBand the whole way except that the song has two tempos and GarageBand can't do it. Thus I am buying Logic Express. But I don't want to learn anymore about Logic Express than I have to, to get the job done. I will stay in GarageBand as much as I can.
Unfortunately, even if I can get my multi-tempoed song back into GarageBand with rewire, GarageBand can't handle the two tempos. So, for that reason, I have to write this off as a learning experience.
Dear mother, Last week I couldn't spell pylut and now I is one.
LuckyMan
PBG4 17 Mac OS X (10.4.2)

Is it OK to install both Logic Pro and Logic Express on my computer?

Is it OK to install both Logic Pro and Logic Express on my computer?
I use Logic to perform live, but i only have 2 USB drives on my computer, and i use them during my performances, one for my keyboard, and one for my audio interface...........therefore, i dont have room to plug in the "node key" in order to use Logic Pro.
So is it ok for me to have Logic Express installed, too?? This way, I dont need to plug in the "node key" (or whatever it's called).
I know i can buy a USB hub, but i cant afford one right now.
Thanks, daddies!
www.myspace.com/johnnydepth

I installed both on my PB 12" - no problem at all
cheers!

Has anyone used macKeeper and is it .k?

has anyone used macKeeper and is it o.k?

You do not want to use MacKeeper. Third party maintenance utiities are not necessary on a Mac.
If you have installed it, follow the instructions here > Uninstalling MacKeeper
Let your Mac run maintenance for you > Mac OS X: About background maintenance tasks
To view other threads regarding MacKeeper, click, "More Like This" right side of this page.

T4i... lousy SD video... has anyone used SD and had final edit look ok. on timeline its a disaster.

T4i... lousy SD video... has anyone used SD and had final edit look ok. on timeline its a disaster. cell phone does better video.. im a pro video type and at this point may return cam and wait for a more capable eos.. like a mirrorless 60d...

Speedorms,
I would like to help determine what is causing this.
What exactly are you seeing that is poor quality in the video from your EOS Rebel T4i?
What are you using to edit your video?
What settings are you using to edit the video?
When you refer to SD, are you referring to the card in the camera or Standard Definition video?
If you prefer a mirrorless design, we do have the new EOS M. You may want to take a look at that model to see if it has the features you are looking for.
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Logic Pro, Logic Studio and Logic Express

Can someone explain the difference between Logic Pro, Logic Studio and Logic Express?

Hi,
I don't think your friend is right on this. When you install Logic X, only the most essential part will be downloaded. After that you open Logic X, and from within the program you can download all the other content. Logic will look if you already have Logic 9 content on your harddisk, so it won't download files that are already present. So, after all is downloaded, all files are on your harddisk, just like Logic 9. By the way, Logic 9 will still be available after installing Logic X.
Whether you will experience crashes will be very hard to prodect, because these will be caused by unforeseen combinations of your computer, audio interfaces, maybe even other hardware, kernel extensions etcetera. If you wait for a couple of months, updates of Logic X will probably have less crashes. As said, on my computer it's just as solid as Logic 9.
Garittan will probably advise a fast harddisk to prevent complaints when people are pushing the plugin to the edge. I would expect that it's not a black/white story.
The AUMatrixreverb can be found in any audio plugin slot completely at the bottom: Audio Units > Apple > AUMatrixReverb.
About the Epiano: in Logic Express there is only the Garageband Epiano, I think. Logic Pro 9 had a great ePiano that they gave a new name and changed a bit in Logic X. Both very nice.
Yes, you may be right, not too many drums with brushes in Logic X, I think. Or does anybody else know where to look??
Kind regards,
Jaap

Anyone using openstreetmap and mapviewer/mapbuilder to create maps

anyone using openstreetmap and mapviewer/mapbuilder to create maps?

Ok, I do exactly as you specify here. In addition I import the needed jars from the import folder of j2mepolish. Also, I put the resources folder from the polish sample (MenuMidlet) in the project, and all marked errors disappears.
Then I try to run it as an Ant build, and get the following error:
BUILD FAILED
D:\Program Files\eclipse31\j2me\sample\build.xml:115: The MIDlet [source.src.de.enough.polish.example.MenuMidlet] could not be found. Check your <midlet>-setting in the file [build.xml] or adjust the [sourceDir] attribute of the <build>-element.The MIDlet should be in D:\Program Files\eclipse31\j2me\sample\source\src\source\src\de\enough\polish\example\MenuMidlet.java
Ok - so it seems that it for some reason gets "source\src" two times. So I go back to the <midlet class and remove the source.src, leaving just de.enough.polish.example.
Then I run as Ant again, and it compiles successfully.
However, when I try to run the MenuMidlet class as a j2me midlet (in eclipse) it starts, and then crash with this error:
java.lang.NoClassDefFoundError: de/enough/polish/util/Locale
     at source.src.de.enough.polish.example.MenuMidlet.<init>(+11)
     at java.lang.Class.runCustomCode(+0)
     at com.sun.midp.midlet.MIDletState.createMIDlet(+19)
     at com.sun.midp.midlet.Scheduler.schedule(+52)
     at com.sun.midp.main.Main.runLocalClass(+28)
     at com.sun.midp.main.Main.main(+116)
So - seemingly - to compile it I need to give it one address, but for the midlet to run it must be compiled with an address that won't let it compile :-)
Well - then I create a J2ME package from the project, and run the deployed/sample.jad file. Then the midlet actually starts, but when I click Launch, the display shows:
New Midlet de.enough.polish.ui.MenuBar Exception: java.lang.classNotFoundException: de/enough/polish/ui/MenuBar
I can't find a reference to MenuBar anywhere in the sample code.

Using Outboard Gear With M-Audio Fast Track Pro And Logic Express

My Fast Track Pro has 2 insert jacks on the back where you can run a send and return to use outboard gear. The cable you use has 2 female 1/4" jacks (one is send and the other is return) that go to a 1/4" male jack that you plug into the back of the interface.
My question is this:
How can I get Logic Express to send a track through the outboard gear connected to my interface? On the track's output settings in Logic there are "Output 1+2", which run to my monitors I think, and "Output 3+4", which don't have anything plugged into them. There don't appear to be any other options for sending the track. How can I get Logic to recognize the Inserts jack on the Fast Track Pro? I'm running all the latest drivers if that means anything. Any help is much appreciated.

Thanks for helping me on this. I'm still a bit confused on how to send the channel through the insert. The jacks on the back of my interface are "TRS Output 1+2" (my monitors are plugged into these outputs), a RCA "Output 1,2,3, and 4", an S/PDIF out and in, and then 2 TRS inserts jacks, marked 1 and 2. Each jack does it's own separate send and return which is why I had to buy the cable with the 2 female jacks on it.
I've been able to use the I/O plugin and get the track to accept a signal from the insert on input 1 (I have a looping pedal running in the send chain and was able to get it to play a loop over top of the audio already recorded on the channel), but am unable to send the recorded track through the fx send. What would I need to set the output to to be able to do this? Thanks for your time.

When using Platinumverb in Logic Express I get pops and clicks

When adding platinumverb or any reverb to a certain audio sample in Logic Express, I am getting very noticable pops and clicks, as though it were taken from vinyl. Why would I get such noises just by adding reverb and is there a way to stop that from happening?

Hi,
1) What kind of mic are you using? If it's a condenser mic, make sure you have phantom power turned on.
2) I am not familiar with the KB37 audio interface. What input is the mic on the device? If it has a mic input, and a guitar input, then it's probably Input 1, but if it isn't you'll need to change the input on the track in Logic to whatever number it should be.

Imac Internal Soundcard and Logic express 9

Hi there, I have just purchased an imac with Logic express 9 (will arrive in a couple of weeks), which has for the time being eaten up all my funds so I cannot yet buy an external audio interface for it. Would anyone be able to give me any information as to the capabilities of the built in soundcard when used with Logic? Obviously I am not expecting anything amazing by any means but is it at least usable until I can afford a decent firewire interface? There isn't really any technical information about it I could find on apple's website so thought I would ask here to see what people's experiences with it are. Any info would be greatly appreciated.
Dan.

Hi, thanks for getting back to me. I won't be recording guitar, I will be recording a hardware synth (which I can run through a small mixing desk to boost signal to the audio in on the imac for the time being). I also have a usb midi keyboard/interface so I am covered in that aspect. I was wondering what the latencies are, and if the internal soundcard supports 24 bit recording.
Cheers,
Dan.

Tascam 1884 and Logic Express 7.2.3 - Master Fader Issue

I am currently having a slightly annoying problem between Logic Express and my Tascam 1884. Whenever I move the Master Fader on the Tascam, it changes the output of the currently selected track in Logic rather than Output 1-2 as it should and used to do.
I opened up the package contents of Logic to check the control surface drivers to see if there was a new version available. The one installed in Logic for the 1884 was labled as v1.0. I checked on the Tascam website and there was an Application Specific driver for Logic labled as v1.10. I downloaded this and installed it in place of the v1.0 driver and started Logic up. I was greeted with an error message stating that the Control Surface Driver was outdated. To see the actual error message, go here:
http://flickr.com/photos/ephraim909/454973721/
Basically, it is stating that the "newer" version is outdated somehow. Is anyone else having this problem or have any idea what may be going on?
15 in. PowerBook G4 1.5 GHz Mac OS X (10.4.6) 1.25gb RAM

Thank you for the response. However, there are a few things wrong with that idea. First of all, that path that both you and Tascam specify to place the bundle is no longer applicable. The place where all the bundles are now is actually in the package contents of Logic Express, where I specified that I placed it. Secondly, there is something wrong with the driver beyond installing it in that, my control surface will no longer install or work. Therefore I cannot just ignore the error message because if I do, then nothing works at all. Once again I appreciate the suggestion, but that doesn't seem to help in my case.

Anyone use hypersonic 2 and logic express 9?

Similar Messages

Maybe you are looking for