AP invoice- Multiple locations selection
Dear Experts,
I have a small problem. In A/p invoice i am able to select two different locations by pressing control key. I send this invoice for approval. But now when is try to select two different locations using the ctl key , on the approved invoice, i get an error message saying " selecting multiple locations is not permitted".. I am using SAP business one 8.8
Can you suggest me a solution
Regards
Shyam
Hi Shyam........
SAP allows transaction for two different warehouse with the same location but not for the two different locations to be added it.....
Reagrds,
Rahul
Similar Messages
-
How to select photo's from multiple locations in Places view?
I want to select photos from multiple locations (close to eachother) in Places view (shift-P). I tried clicking to pins with cmd-click, but that did not work. They turn yellow, but that does not select the photos from that location.
KoenFound the answer myself
Yellow pins select the photos from that location, whereas clicking the arrow on the balloon above the pin creates a filter for photos from that location.
Koen -
Suddenly my event library in iMovie 11 is empty. I have tried deleting the plist, importing clips from multiple locations (to see if they show up in the library), re-installing iMovie, and re-installing Mountain Lion.
I was working on a project, when all of a sudden the event library went blank. There are no devices showing in the left column, only "last import" and "aperture videos". There are no video clips in the editing window. I have "Show: All Clips" selected. I've tried "group events by disk".
When I have a Project open, it plays just fine. There are no yellow triangles saying "source clip is missing". Yet, again...nothing is in the event library large editing window. So, it seems the data is still there, but invisible. This is true with all the projects, and all the external devices I've experimented by plugging in to see if their video clips show up in the event library.
I have tried to import new movies, and iMovie responds as normal...looking like it's importing, then "generating thumbnails", then it makes the "ding" signalling that the import is complete...but nothing shows in the event library. I've tried importing movies from the harddrive, from quicktime, and from an external drive.
I have searched the forums, and found many users with a similar, but not the same, problem. For them, it seems the "go to users-library-preferences and delete iMovie plist" has solved their problem. This didn't work for me.
I uninstalled/reinstalled iMovie, I even have re-installed Mountain Lion (from a last-ditch effort suggestion from Apple technician).
HERE'S AN INTERESTING DETAIL: After almost 5 hours on the phone with Apple, I decided to cut my losses and take my project to another Mac I have. I'm working on a project, for work, that is critical that it's completed by tonight (whoops), and all my video is on an external drive. So, I plug in the external drive to Mac #2, open iMovie, and everything is looking fine. I continue importing some files I was converting, through Wondershare, and suddenly (whether or not this has to do with the importing, I'm not sure), the SAME THING happened to Mac #2!!!! I can't believe this.
Does anyone have any suggestions? Have you ever heard of this happening? Could it have to do with the files I'm importing???
I apologize if my language is confusing. Obviously, I'm not an Apple genius-person! I hope I've provided all the information you need.
Mac #1 is a 27" desktop, mid-2012, software up-to-date. Mac #2 is a 24" desktop, about 4 years old, OSX 10.7.5I'm adding more information:
in Finder, my iMovie folders are all visible and accessible. When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip. ALL my video is not missing - it just isn't showing up in the Event Library!
This happened all of a sudden, while I was working on iMovie project (on both computers).
All my Projects are intact, and play when I open them. -
Multiple Locations in Receiver File channel
Hi Experts,
Can i give multiple locations to pick the file in receiver filec hanel depending on some condition.
Thanks
Ajay GargHi,
Definately you can....
in sender Communication channel check the ADVANCED SELECTION FOR SOURCE FILES.......
Thanks,
Madhu -
Trying to make multiple facet/selections work
I'm assigned a task of making ATG Commerce Reference Store use alternatives in faceted search filtering.
What do I mean:
Suppose I have facet "Color" with values "Red", "Green" and "Indigo". I'm located in some top-level category.
And I filter search results by clicking on "Red" facet value in navigation panel. Search is requested with facetTrail string like: "9004:cat70002:1002:Red".
But resulting FacetTrail object does not contain information about facet values "Green" and "Indigo".
Documentation says:
The search engine filters all facets unless the refinement configuration specifies otherwise. To disable
filtering of an individual facet, you add the faceting property to the filterProperties array property of
the /atg/commerce/search/refinement/RefinementConfigurationXMLGenerator component.
By default, this property is set to:
filterProperties=\
ancestorCategories.$repositoryId,\
ancestorCategories.displayName If you have additional facets that you do not want to be filtered, add the faceting properties to this array.
For example:
filterProperties+=paperSizesI added all available in CRS filterProperties in RefinementConfigurationXMLGenerator object as instructed, like so:
filterProperties+=price,childSKUs.size,childSKUs.color,childSKUs.woodFinish,features.displayNameBut, sadly, this had no effect.
I'm checking for multiple facet values by running:
<c:forEach var="currentFacetValue" items="${facetTrail.facetValues}">
<dsp:getvalueof var="facetId" vartype="java.lang.String" value="${currentFacetValue.facet.id}" />
<dsp:getvalueof var="facetValue" value="${currentFacetValue.value}" />
<dsp:valueof value="${facetId}" />
<c:forEach items="${facetValue}" var="currentMultiValue">
<dsp:valueof value="${currentMultiValue}" />
</c:forEach>
</c:forEach>,where I got $facetTrail object by running:
<dsp:droplet name="CommerceFacetTrailDroplet">
<dsp:param name="trail" bean="FacetSearchTools.facetTrail" />
<dsp:param name="refineConfig" param="catRC" />
<dsp:oparam name="output">
<dsp:getvalueof var="facetTrail" param="facetTrail"/>
</dsp:oparam>
</dsp:droplet>----------------
There were some related questions, but they didn't help:
Search 10.0.1 - Multi facet issue. - no answer given
multiple facet selection, with OR combination - I re-did the indexing from BCC, but it did nothing back.
So, how do I get required result? Have I misconfigured something? Or I simply searching results in the wrong place?
Edited by: 927222 on Apr 13, 2012 5:48 AMOk..so if i get it right here
your facet trail after selecting red color is coming as "9004:cat70002:1002:Red"
which means that you are telling search engine to bring all search results that are in cat70002 and of color Red.
Now why would refinements contain green and indigo.
Coz when you are in top category your facet trail would be "9004:cat70002", which will say that bring me all results under category cat70002, and which will contain results of Red, Green and Indigo too if they are present.
By clicking on a color you are basically narrowing your search. -
How to manage multiple locations for Item (Management warehouse locations)
Is there any way, with UDF and Formated Search, to manage multiple locations for Item in the same warehouse
I must have several (at least 2) locations for the item in the Warehouse and that i enter in goods receipt and have track of this location and search possibilities at sales order by item and WHS.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables and there is a relationship between all.
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
a piece of code has been proposed, but it is not so simple
SELECT T0.U_Location FROM [dbo].[OITM] T0 WHERE T0.ItemCode = $[$38.1.0]
Thanks,
OuchenI believe you are talking about defining BIN's (locations) within a Warehouse.
This is quite possible and has been explained / discussed on this Forum a few times in the past. Though I am completely clear on how you would like to implement this I could give you some guidelines..
Creating a @location UDT is correct to maintain list of warehouse locations
UDF in Items - Warehouses (Item Master ..Inventory Data Tab..Rows)
UDF in Marketing Document Rows (When you add a UDF here U_Location then this will available in all marketing documents, both AR and AP)
You will define a location for an Item in the Item Master....
In the GRPO..you can use FMS to list the location/s for the Item being received from the Item Master and the User can Select it.
In the Sales Order, you can select the location from which the Item could be picked..
Let me know if your process / ideas are different
Suda -
Run FDM Report on Multiple Location
Hello,
We are on FDM 11.1.2.1. What I'm trying to do is design/change one of the can reports out of FDM so that it will run on multiple locations. I can get the report to run on the current location, a location selected by the user or can get it to run on all locations (takes way too long). What I would like to be able to do is set it up to run the report for all of the children under a control review location. Has anyone ever attempted this or do you have any insight into how to accomplish this? Any suggestions would be appreciated.
Thank you,
JasonSome food for thought.
The easiest way to do this would be to have a stored procedure / SQL query that the report is going to hit that will give it exactly what it needs.
- If you are OK with hard coding values into locations, I agree that the Group Tag idea is good. You could retrieve all of the locations with a query like :
select * from tPOVPartition where PartNotes = 'GroupNameHere'or assuming it is going to be used in there where clause :
Select blah blah blah
from blah blah blah
where blah blah blah and (PartitionKey in (select PartitionKey from tPOVPartition where PartNotes = 'GroupNameHere'))
- If you are NOT OK with hard coding Group Tags and want to just let the natural hierarchy work, there is hope.
By using the tStructParitionLinks table, you can traverse the hierachy and get your list.
Assuming You have nothing deeper than 1 level, the follow SQL will work:
(NOTE: Start Location would be the parent and Endlocation would be the child)
SELECT a.StartLocationID, a.EndLocationID, b.PartName
FROM tStructPartitionLinks AS a INNER JOIN
tPOVPartition AS b ON a.EndLocationID = b.PartitionKey
where a.StartLocationID = <starting parent ID>The problem here is that if you have multiple nested levels, this query is not going to return all of the base items. If you need something to do that, than what you want to do is create a nested stored procedure. I'm not going to supply one as it would take me a bit to write it up.
The basic premise is :
- The stored procedure takes an input parameter, ParentID
- The stored procedure uses a temp table to hold results
- The stored procedure keeps track of it's recursive level and starts at one. (SQL Server handles this built in, assume oracle does as well)
- When you call the routine, it takes the ParentID, scans the Partition Link table and pulls all children that are tied directly to it.
- For each of the children, it adds an entry to the temp database table.
- Then it checks to see if that child record is also a parent in the table.
- If it is a parent, it calls another instance of itself (stored procedure) this time passing the child ID as the parent ID
- Eventually after you've exhausted all of the children/parents, you end up at the end of the initial call and at this point, you return the contents of the temp table.
- A third option, would be to use FDM script to accomplish this. In theory you could kick something off in a script, have it pull the list of children, and have it pass that info to the report and run it..... The following script will give you a listing of children for a parent :
Sub ShowChildren()
'Hyperion FDM CUSTOM Script:
'Created By: cbeyer
'Date Created: 2012-02-22-10:43:06
'Purpose:
'Declare variables
Dim lngLocID
Dim lngParentID
Dim strParentName
Dim strChildren
'Get current ID by current POV
'NOTE: You could easily change this around to accept a parameter, etc, by using GetName/GetID calls shown below.
lngLocID = STRUCTMGR.fGetLocationIDFromName(API.POVMgr.PPOVLocation)
'Get parent ID
lngParentID = STRUCTMGR.fGetLocationParent("Controls", lngLocID)
'Get Name of parent
strParentName = STRUCTMGR.fGetLocationName("Controls", lngParentID)
'Create recordset and Enumerate children
With STRUCTMGR.frsChildrenAll("Controls", lngLocID)
If Not .BOF And Not .EOF Then
Do While Not .EOF
strChildren = strChildren & .Fields("PartName").Value & vbCrLf
.MoveNext
Loop
Else
'No children
strChildren = "Location has no children"
End If
'Close recordset
.Close
End With
'Display the children information
If LCase(API.DataWindow.Connection.PstrClientType) = "workbench" Then
MsgBox "List of Children for " & strParentName & " : " & strChildren
Else
'Web Client (Set API action properties)
RES.PlngActionType = 2
RES.PstrActionValue = "List of Children for " & strParentName & " : " & strChildren
End If
End Sub -
IRecruitment: How can I post a vacancies in multiple locations?
iRecruitment: How can I post a vacancies in multiple locations?
I have one opening that can be filled in PA or CT? How do I select multiple locations? Does iRecruitment allow us to create a National location so that a candidate will find the job based on either or all states?As Glenn said, these two types are the typical input files.
two ways that I can easily think of, but there are more.
1. Have a row memberwith the period so for sample basic, the row would look lik
cola,ny,actual,sales,Jan,100
First case in the rule file you have to map all the member fileds with the dimension name and the data column with the data field.
2. Have the data for each month as as the column members
Here is the header followed by a data sample(again for sample basic)
Product,Market,Scenario,Measure,Jan,Feb,Mar,Apr,May,Jun,Jul,Aug,Sep,Oct,Nov,Dec
1oo-10,NY,Actual,Sales,100,100,100,100,100,100,100,010,122,111,222,333
Second case in the rule file you have to map all the member fileds with the corresponding dimension name and the multiple data columns with the corresponding member names for that dimension. -
My name is Tess Loggins and I am a lover of Omnifocus for iphone. I
> love Omnifocus ,but it is lacking a feature for me. I don't really
> know how to write this so, please bear with me. Ok. Take out a piece
> of paper and label it on top Grocery List. Keep in mind that you like
> to shop at Giant Eagles and Trader Joes. (these two stores are your
> multiple locations)Write on your list eggs, pickles, butter, wine,
> tomatoes and lobster(my favorite). So now you have your list. Now it's
> time to go shopping. let's get into the car..(Please imagine all of
> this on your iphone/and or using Omnifocus).Lets go to Giant Eagles
> first. Wow! my whole list on that piece of paper pops up on my screen
> on my iphone, so all I have to do is check off the items I needs as I
> walk through the store. Now, I have decided that I will now go to
> Trader Joes for the wine, pickles and lobster... (I didn't check off
> the wine, pickles or lobster) Ok, back into the car.lets now drive to
> Trader Joes. Now ,we are pulling into the driveway of Trader Joes and
> BAM. my list wine, pickles and lobster (Just like I wrote it on that
> piece of paper) pops up. Now we enter Trader Joes and as we walk down
> the aisle, we can check of the whole list because it's now on our
> iphone screen. This to me is what I call technology.. I hope you
> understand my point I am trying to get across. In your next Omnifocus
> update can you PLEASE implement this to your app. I want that whole
> experience in the app. Is this at all possible to do? Is there even a
> way that I can help to make this happen! In all the apps in the Appstore no one has come up with this idea and has not made app just like this.You seem to think you are talking to Omnifocus here. The odds of actually reaching them here are practically 0%, I would guess.
I suggest you go to the omnigroup forums and present your suggestions in the omnifocus forum.
http://forums.omnigroup.com -
How to integrate bing map for including or displaying multiple locations at the same time
how to integrate bing map for including or displaying multiple locations at the same time
Have you aware of the geolocation field that's been introduced with SharePoint 2013? You can store location data within a list and then integrate this within Bing. The second tutorial on this Bing team blog will show it well.
https://www.bing.com/blogs/site_blogs/b/maps/archive/2013/03/26/connecting-a-sharepoint-list-to-bing-maps.aspx
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem. -
How to set a payload field value only once for multiple instances selected?
The user needs to set a payload field value and then he can approve the task so the task can continue through the process, that's fine when the user selects one instance and sets the value in the task details section and then clicks the approve button, but how do we achieve the same behavior in a multiple way?, I mean the user can select multiple tasks in the workspace (in this case the details task page is not available and instead the following label appear "Multiple tasks selected") then if the user clicks the Actions drop down -> APPROVE he only gets the message "your request was processed successfully", so how can the user modify the payload field value only once for all the selected tasks so when he clicks APPROVE the value is populated in all the instances selected.
Thanks,
Carlos.In the action which displays the edit page just set the form idx value before displaying the jsp.
-
Distributing the GOA to multiple locations in the same backend
Hello Folks,
We are implementing SRM 5.0 (SAPKIBKT10 Support Package level) with Extended Classic Scenario, with only one backend system (R3 V4.6b) integrated with the SRM system.
Queries:
At GOA header - Distribution, Example is shown below....
Backend Purchase Organization 1 - Location A
Backend Purchase Organization 1 - Location B
When we distribute one GOA to the backend with multiple locations for the same Purchase organiation.
In the backend system two idocs are getting generated with the same contract number. While processing the first Idoc the system is creating the contract but while processing the second idoc the system is changing the previously created contract, instead of creating a new contract.
So, in standard does the system creates actually creates two contract numbers for two different locations?
Can somebody throw some light on the logic of the distribution
Regds
Amith
Edited by: Amith Varma on Feb 26, 2008 4:51 AMHi Amith,
this is normal behaviour of the system in the case POrgs are set up accross company codes. In the Contract IDoc the Comany Code is derived from the location. When the system finds the same company code, it does not create an additional contract, but just updates the already distributed contract.
Cheers,
Claudia -
Aim to process all files in folders on desktop to run through photoshop and save in multiple locations
Part one:-
Gather information from desktop to get brand names and week numbers from the folders
Excluding folders on desktop beginning with "2" or "Hot"
Not sure about the list of folders
but I have got this bit to work with
set folderPath to "Hal 9000:Users:matthew:Desktop:DIVA_WK30_PSD" --<<this would be gained from the items on the desktop
set {oldTID, my text item delimiters} to {my text item delimiters, ":"}
set folderName to last text item of folderPath
set my text item delimiters to "_WK"
set FolderEndName to last text item of folderName
set brandName to first text item of folderName
set my text item delimiters to "_PSD"
set weekNumber to first text item of FolderEndName
set my text item delimiters to oldTID
After running this I have enough information to create folders in multiple locations, (i need to know where they are so that photoshop can later save them in those multiple locations
So I need the following folders created
Locally
Hal 9000:Users:matthew:Pictures:2011-2012:"WK" + weekNumber
Hal 9000:Users:matthew:Pictures:2011-2012:"WK" + weekNumber: brandName
Hal 9000:Users:matthew:Pictures:2011-2012:"WK" + weekNumber: brandName: brandName + "_WK" + weekNumber + "_LR" --(Set path for Later)PathA
Hal 9000:Users:matthew:Pictures:2011-2012:"WK" + weekNumber: brandName: brandName + "_WK" + weekNumber + "_HR"--(Set path for Later)PathB
Network
Volumes:GEN:Brands:Zoom:Brands - Zoom:Upload Photos:2012:"Week" + weekNumber
Volumes:GEN:Brands:Zoom:Brands - Zoom:Upload Photos:2012:"Week" + weekNumber:brandName + "_WK" + weekNumber + "_LR" --(Set path for Later)PathC
Volumes:GEN:Website_Images --(no need to create folder just set path)PathD
FTP (Still as a normal Volume) So like another Network
Volumes:impulse:"Week" + weekNumber
Volumes:impulse:"Week" + weekNumber:Brand
Volumes:impulse:"Week" + weekNumber:Brand:brandName + "_WK" + weekNumber + "_LR" --(Set path for Later)PathE
Volumes:impulse:"Week" + weekNumber:Brand:brandName + "_WK" + weekNumber + "_HR" --(Set path for Later)PathF
I like to think that is end of Part 1
Part 2
Take the images (PSD's) from those folders relevant to the Brand then possibly run more applescript that opens flattens and then saves it in the locations above.
For example….
An image in folder DIVA_WK30_PSD will then run an applescript in Photoshop, lets call it DivaProcessImages within this we then save to PathA, PathB, PathC, PathD, PathE, PathF the folder path of C should therefore look like this
Volumes:GEN:Brands:Zoom:Brands - Zoom:Upload Photos:2012:Week30:DIVA_WK30_LR and of course save the image as original filename.
Then from the next folder
An image in folder Free_WK30_PSD will then run an applescript in Photoshop, lets call it FreeProcessImages within this we then save to PathA, PathB, PathC, PathD, PathE, PathF the folder path of C should therefore look like this
Volumes:GEN:Brands:Zoom:Brands - Zoom:Upload Photos:2012:Week30:Free_WK30_LR and of course save the image as original filename.
The photoshop applescript i'm hoping will be easier as it should be a clearer step by step process without any if's and but's
Now for the coffee!!Hi,
MattJayC wrote:
Now to the other part, where each folder was created (and those that already existed) how do I set them as varibles?
For example,
set localBrandFolder_High_Res to my getFolderPath(brandName & "_WK" & weekNumber & "_HR", localBrandFolder)
This line was used to create more than one folder as it ran though the folders on the desktop. The next part is I will need to reference them to save files to them.
You can use a records
Examples
if you want the path of localBrandFolder_High_Res of "Diva", if "Diva" is the second folder of the Desktop
You get the path with this : localBrandFolder_High_Res of record 2 of myRecords
if you want the path of localWeekFolder in the first folder of the Desktop
You get the path with this : localWeekFolder of record 1 of myRecords
Here is the script
set myRecords to {}
set dtF to paragraphs of (do shell script "ls -F ~/Desktop | grep '/' | cut -d'/' -f1")
repeat with i from 1 to number of items in dtF
set this_item to item i of dtF
if this_item does not start with "2_" and this_item does not start with "Hot" then
try
set folderPath to this_item
set {oldTID, my text item delimiters} to {my text item delimiters, ":"}
set folderName to last text item of folderPath
set my text item delimiters to "_WK"
set FolderEndName to last text item of folderName
set brandName to first text item of folderName
set my text item delimiters to "_PSD"
set weekNumber to first text item of FolderEndName
set my text item delimiters to oldTID
end try
try
set this_local_folder to "Hal 9000:Users:matthew:Pictures:2011-2012"
set var1 to my getFolderPath("WK" & weekNumber, this_local_folder)
set var2 to my getFolderPath(brandName, var1)
set var3 to my getFolderPath(brandName & "_WK" & weekNumber & "_LR", var2)
set var4 to my getFolderPath(brandName & "_WK" & weekNumber & "_HR", var2)
--set up names to destination folders and create over Netwrok including an already exisiting folder
set this_Network_folder to "DCKGEN:Brands:Zoom:Brand - Zoom:Upload Photos:2012:"
set var5 to my getFolderPath("WK" & weekNumber, this_Network_folder)
set var6 to my getFolderPath(brandName, var5)
set var7 to my getFolderPath(brandName & "_WK" & weekNumber & "_LR", var6)
set website_images to "DCKGEN:Website_Images:"
--set up names to destination folders and create over Netwrok for FTP collection (based on a mounted drive)
set this_ftp_folder to "Impulse:"
set var8 to my getFolderPath("Week" & weekNumber, this_ftp_folder)
set var9 to my getFolderPath(brandName, var8)
set var10 to my getFolderPath(brandName & "_WK" & weekNumber & "_LR", var9)
set var11 to my getFolderPath(brandName & "_WK" & weekNumber & "_HR", var9)
set end of myRecords to ¬
{localWeekFolder:var1, localBrandFolder:var2, localBrandFolder_Low_Res:var3, localBrandFolder_High_Res:var4, networkWeekFolder:var5, networkBrandFolder:var6, networkBrandFolder_Low_Res:var7, ftpWeekFolder:var8, ftpBrandFolder:var9, ftpBrandFolder_Low_Res:var10, ftpBrandFolder_High_Res:var11}
end try
end if
end repeat
localBrandFolder_High_Res of record 2 of myRecords -- get full path of localBrandFolder_High_Res in the second folder of Desktop
on getFolderPath(tName, folderPath)
tell application "Finder" to tell folder folderPath
if not (exists folder tName) then
return (make new folder at it with properties {name:tName}) as string
else
return (folder tName) as string
end if
end tell
end getFolderPath -
The file size of selected file in input file control is shown as 0 for multiple file selection in Safari 5.1. If you select single file, then it is able to return file size correctly. However, if you select multiple files, then the file size of each of the selected file is always returned as 0 from javascript. This works correctly in Safari 4.0 but it does not work in Safari 5.1.
How do I get the correct file size in Safari 5.1 ?If you want to post (or send me) a link to the lrcat file, I'd take a look at it for you, and give you a break-down what's consuming all the bytes. But it might be fun to learn how to do that yourself (e.g. using SQL). I use SQLiteSpy, but other people have their favorites.. (or you can use a command-line client if you prefer..). One way: just run "drop table "{table-name}" on each table then look at filesize (do this to a copy, not the real thing).
Anyway, it's hard to imagine keywords and captions etc. taking much of the space, since even if you had 1000 10-character words of text metadata per photo average that still only adds up to 117MB, which isn't a substantial portion of that 8G you're seeing occupied.
Anyway, if you've painted the heck out of most of them and not cleared dev history, that'll do it - that's where I'd put my money too...
One thing to consider to keep file-size down:
===================================
* After reaching a milestone in your editing, take a snapshot then clear edit history, or the top part of it anyway (e.g. leave the import step), using a preset like:
Clear Edit History.lrtemplate
s = {
id = "E36E8CB3-B52B-41AC-8FA9-1989FAFD5223",
internalName = "No Edit",
title = "Clear Edit History",
type = "Develop",
value = {
settings = {
NoEdit = true,
uuid = "34402820-B470-4D5B-9369-0502F2176B7F",
version = 0,
(that's my most frequently used preset, by far ;-})
PS - I've written a plugin called DevHistoryEditor, which can auto-consolidate steps and reduce catalog size - it's a bit cumbersome to use a.t.m. but in case you're interested...
Rob -
Dear fellow developers,
I'm trying to edit an existing variable using BEX query, so that it can allow multiple input selections.
As you can see in the screenshot attached, the option is selectable during creation.
However, during editing of an existing field, this field (Details -> Basic Settings -> Variable Represents) is not selectable.
Does anyone knows why, and how to remedy this?Yes you can do it at the table level.
Go to SE11 enter table name as RSZGLOBV.
Enter the technical name of variable in VNAM field..You need to change the value in VPARSEL column.
Please make sure to get the where used list of this variable so that you can know the impact,if something goes wrong.
Also change it in DEV and then transport across the landscape.
PS:Same thing has been described in this blog as well
Changing BI variable parameters
Regards,
AL
Message was edited by: Anshu Lilhori
Maybe you are looking for
-
Error While Deploying Webdynpro Application.
Dear Experts, While deploying web dynpro application having webservice based Model, I am getting following errors- <b>'SERVICEID' not defined for model class 'Request_ZHRESS_STATION_REQUISITION'</b> I have checked model structure where I can see that
-
Status Indicator Light not working
I've been having a recurring issue with the status indicator light on my 15.4-inch MacBook Pro 2.8 GHz (Mid-2009). I learned recently that it's normal for the status indicator light to be on when the computer starts up, shuts down and goes to sleep.
-
Auto download is costly when you happen to connect via wifi using your mobile data network.
-
How do I get my plugins to work in PS CC2014?
How do I get my plugins to work in PS CC 2014?
-
Hi guys! I want to know where can I set up the network -> workspace -> device management's log and get the log and what is the name of the network -> workspace -> device's service? Thank you for your answers.