AP report based on Reconciliation A/c by Segment/Profit Centre

Hello
We are on ECC 6.0 and have not applied any enhancement package.
Requirement is to generate Accounts payable report reconciliation account wise by Segment and Profit Centre. Is it possible? If yes, how do we generate it? Name me the t codes.
Standard reports available are -
1. FBL1N - Vendor line item at company code level
2. F.42 or S_ALR_87012082 - Vendor Trial Balance at company code level
3. FK10N - Vendor account balance at company code level
4. S_AC0_52000888 - Payables by Profit Centre
5. S_PCO_36000219 - Payables by Segment
Thanks.
Vimal

Deepak
Thanks for your prompt reply.
I'm able to generate / display the requisite information through FAGLL03 t code.
Thanks.
Vimal
Edited by: Vimal Kishore Soni on Nov 26, 2009 7:17 AM

Similar Messages

  • Profit Centre Master Data : Reports

    Hello CO Experts,
    please let me know :
    1. which T-Code will generate a report which will display the list of all Profit Centres in that Controlling Area ?
    2. which T-Code will generate a report which will display the list of all profit centres & the elements (Primary/Secondary) assigned to them ?

    Hi,
    For the first point, you can use KE55 transaction.
    For the second point, there is no assignment of cost element to PCtr as such, but you can see the postings in profit centre/cost element in any standard report, i.e. S_ALR_87013326 - Profit Center Group: Plan/Actual/Variance.
    Regards,
    Eli

  • R12: How to filter AP and PO Accrual Reconciliation Report based on GL Date

    Hi,
    Anybody know how to filter AP and PO Accrual Reconciliation Report based on GL Date from and GL Date to in R12?
    Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
    We need to run the report only for specific date only. Please share with me if anyone know about this.
    Thanks.

    In 12 you can rebuild and run the report for a particular period, but not a single day if that's what's required

  • How to create a report based on a DataSet programatically

    I'm working on a CR 2008 Add-in.
    Usage of this add-in is: Let the user choose from a list of predefined datasets, and create a totally empty report with this dataset attached to is. So the user can create a report based on this dataset.
    I have a dataset in memory, and want to create a new report in cr2008.
    The new report is a blank report (with no connection information).
    If I set the ReportDocument.SetDataSource(Dataset dataSet) property, I get the error:
    The report has no tables.
    So I must programmatically define the table definition in my blank report.
    I found the following article: https://boc.sdn.sap.com/node/869, and came up with something like this:
    internal class NewReportWorker : Worker
          public NewReportWorker(string reportFileName)
             : base(reportFileName)
    public override void Process()
             DatabaseController databaseController = ClientDoc.DatabaseController;
             Table table = new Table();
             string tabelName = "Table140";
             table.Name = tabelName;
             table.Alias = tabelName;
             table.QualifiedName = tabelName;
             table.Description = tabelName;
             var fields = new Fields();
             var dbField = new DBField();
             var fieldName = "ID";
             dbField.Description = fieldName;
             dbField.HeadingText = fieldName;
             dbField.Name = fieldName;
             dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
             fields.Add(dbField);
             dbField = new DBField();
             fieldName = "IDLEGITIMATIEBEWIJS";
             dbField.Description = fieldName;
             dbField.HeadingText = fieldName;
             dbField.Name = fieldName;
             dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
             fields.Add(dbField);
             // More code for more tables to add.
             table.DataFields = fields;
             //CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo info =
             //   new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
             //info.Attributes.Add("Databse DLL", "xxx.dll");
             //table.ConnectionInfo = info;
             // Here an error occurs.
             databaseController.AddTable(table, null);
             ReportDoc.SetDataSource( [MyFilledDataSet] );
             //object path = @"d:\logfiles\";
             //ClientDoc.SaveAs("test.rpt", ref path, 0);
    The object ClientDoc referes to a ISCDReportClientDocument in a base class:
       internal abstract class Worker
          private ReportDocument _ReportDoc;
          private ISCDReportClientDocument _ClientDoc;
          private string _ReportFileName;
          public Worker(string reportFileName)
             _ReportFileName = reportFileName;
             _ReportDoc = new ReportDocument();
             // Load the report from file path passed by the designer.
             _ReportDoc.Load(reportFileName);
             // Create a RAS Document through In-Proc RAS through the RPTDoc.
             _ClientDoc = _ReportDoc.ReportClientDocument;
          public string ReportFileName
             get
                return _ReportFileName;
          public ReportDocument ReportDoc
             get
                return _ReportDoc;
          public ISCDReportClientDocument ClientDoc
             get
                return _ClientDoc;
    But I get an "Unspecified error" on the line databaseController.AddTable(table, null);
    What am i doing wrong? Or is there another way to create a new report based on a DataSet in C# code?

    Hi,
    Have a look at the snippet code below written for version 9 that you might accommodate to CR 2008, it demonstrates how to create a report based on a DataSet programmatically.
    //=========================================================================
    +           * the following two string values can be modified to reflect your system+
    +          ************************************************************************************************/+
    +          string mdb_path = "C:
    program files
    crystal decisions
    crystal reports 9
    samples
    en
    databases
    xtreme.mdb";    // path to xtreme.mdb file+
    +          string xsd_path = "C:
    Crystal
    rasnet
    ras9_csharp_win_datasetreport
    customer.xsd";  // path to customer schema file+
    +          // Dataset+
    +          OleDbConnection m_connection;                         // ado.net connection+
    +          OleDbDataAdapter m_adapter;                              // ado.net adapter+
    +          System.Data.DataSet m_dataset;                         // ado.net dataset+
    +          // CR variables+
    +          ReportClientDocument m_crReportDocument;          // report client document+
    +          Field m_crFieldCustomer;+
    +          Field m_crFieldCountry;+
    +          void CreateData()+
    +          {+
    +               // Create OLEDB connection+
    +               m_connection = new OleDbConnection();+
    +               m_connection.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + mdb_path;+
    +               // Create Data Adapter+
    +               m_adapter = new OleDbDataAdapter("select * from Customer where Country='Canada'", m_connection);+
    +               // create dataset and fill+
    +               m_dataset = new System.Data.DataSet();+
    +               m_adapter.Fill(m_dataset, "Customer");+
    +               // create a schema file+
    +               m_dataset.WriteXmlSchema(xsd_path);+
    +          }+
    +          // Adds a DataSource using dataset. Since this does not require intermediate schema file, this method+
    +          // will work in a distributed environment where you have IIS box on server A and RAS Server on server B.+
    +          void AddDataSourceUsingDataSet(+
    +               ReportClientDocument rcDoc,          // report client document+
    +               System.Data.DataSet data)          // dataset+
    +          {+
    +               // add a datasource+
    +               DataSetConverter.AddDataSource(rcDoc, data);+
    +          }+
    +          // Adds a DataSource using a physical schema file. This method require you to have schema file in RAS Server+
    +          // box (NOT ON SDK BOX). In distributed environment where you have IIS on server A and RAS on server B,+
    +          // and you execute CreateData above, schema file is created in IIS box, and this method will fail, because+
    +          // RAS server cannot see that schema file on its local machine. In such environment, you must use method+
    +          // above.+
    +          void AddDataSourceUsingSchemaFile(+
    +               ReportClientDocument rcDoc,          // report client document+
    +               string schema_file_name,          // xml schema file location+
    +               string table_name,                    // table to be added+
    +               System.Data.DataSet data)          // dataset+
    +          {+
    +               PropertyBag crLogonInfo;               // logon info+
    +               PropertyBag crAttributes;               // logon attributes+
    +               ConnectionInfo crConnectionInfo;     // connection info+
    +               CrystalDecisions.ReportAppServer.DataDefModel.Table crTable;+
    +               // database table+
    +               // create logon property+
    +               crLogonInfo = new PropertyBag();+
    +               crLogonInfo["XML File Path"] = schema_file_name;+
    +               // create logon attributes+
    +               crAttributes = new PropertyBag();+
    +               crAttributes["Database DLL"] = "crdb_adoplus.dll";+
    +               crAttributes["QE_DatabaseType"] = "ADO.NET (XML)";+
    +               crAttributes["QE_ServerDescription"] = "NewDataSet";+
    +               crAttributes["QE_SQLDB"] = true;+
    +               crAttributes["QE_LogonProperties"] = crLogonInfo;+
    +               // create connection info+
    +               crConnectionInfo = new ConnectionInfo();+
    +               crConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;+
    +               crConnectionInfo.Attributes = crAttributes;+
    +               // create a table+
    +               crTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table();+
    +               crTable.ConnectionInfo = crConnectionInfo;+
    +               crTable.Name = table_name;+
    +               crTable.Alias = table_name;+
    +               // add a table+
    +               rcDoc.DatabaseController.AddTable(crTable, null);+
    +               // pass dataset+
    +               rcDoc.DatabaseController.SetDataSource(DataSetConverter.Convert(data), table_name, table_name);+
    +          }+
    +          void CreateReport()+
    +          {+
    +               int iField;+
    +               // create ado.net dataset+
    +               CreateData();+
    +               // create report client document+
    +               m_crReportDocument = new ReportClientDocument();+
    +               m_crReportDocument.ReportAppServer = "127.0.0.1";+
    +               // new report document+
    +               m_crReportDocument.New();+
    +               // add a datasource using a schema file+
    +               // note that if you have distributed environment, you should use AddDataSourceUsingDataSet method instead.+
    +               // for more information, refer to comments on these methods.+
    +               AddDataSourceUsingSchemaFile(m_crReportDocument, xsd_path, "Customer", m_dataset);+
    +                              +
    +               // get Customer Name and Country fields+
    +               iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Customer Name", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
    +               m_crFieldCustomer = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
    +               iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Country", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
    +               m_crFieldCountry = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
    +               // add Customer Name and Country fields+
    +               m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCustomer);+
    +               m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCountry);+
    +               // view report+
    +               crystalReportViewer1.ReportSource = m_crReportDocument;+
    +          }+
    +          public Form1()+
    +          {+
    +               //+
    +               // Required for Windows Form Designer support+
    +               //+
    +               InitializeComponent();+
    +               // Create Report+
    +               CreateReport();+
    +               //+
    +               // TODO: Add any constructor code after InitializeComponent call+
    +               //+
    +          }+//=========================================================================

  • Generating a report based on two analytics(for ex:PO and PR)

    I have a question regarding generating reports on two analytics.
    In our scenarios,
    We need to generate a report based on Purchase order and Purchase request.Is it possible in OBIA?
    if yes,please provide the solution.
    Thanks in advance

    Hi ,
    Thanks for your valuable time.
    We are in designing phase of the project. we need to know ,Is there any inbuilt dashboards or reports built using both PO and PR repositories?
    I would like to explain with ex:
    Let's say we need a report or dashboard containing few fields from PO and few fields from PR.Let's assume both PO and PR data available at same granularity.
    Do we have any such inbuilt reports or dashboard?
    If not,could we customize the report generation using both PO and PS tables?
    Please provide the solution.
    Thanks in advance.
    Edited by: user3561029 on Aug 31, 2008 9:03 PM

  • R12: How to filter Open Item Revaluation Report based on GL Date

    Hi,
    Anybody know how to filter Open Item Revaluation Report based on GL Date from and GL Date to in R12?
    Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
    We need to run the report only for specific date only. Please share with me if anyone know about this.
    Thanks.

    Pl do not post duplicates - R12: How to filter Open Item Revaluation Report based on GL Date

  • Sales Analysis Report based on Supplier-wise

    Hi Experts,
    My client requirement is ,We are into trading so , we want a Sales analysis report based on Supplier-wise. like,
    Selection critieria is
    1)Supllier name
    2)From and To date.
    Heading are
    Item name     Sales UoM    Jan(quantity)   Feb(quanitity)   mar(quantity)   April(quanitiy).........
    here, i need only the sum of the quantity for the items for that particular month based on the date giving in selection criteria.
    Regards,
    Dwarak
    Edited by: Dwarak@SMS on Aug 23, 2010 4:29 PM

    Hi experts,
    For my clients requirement,
    I could able to alter my previous query(find below).
    My object is
    1)To get sales report based on Manufacturer.
    2)To get the TOTAL SALES QUANTITY OF THE MONTHS in the report. I go that in the below query, and only thing is that is have to minus the total Credit note for items to get the ACTUAL TOTAL SALES OF THE MONTHS. so , can anyone help me to alter the query to get me the ACTUAL TOTAL SALES OF THE MONTHS.
    the query is
    SELECT T0.ITEMCODE,T0.ItemName,T0.OnHand,
    (SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
    (NOLOCK) WHERE MONTH(T1.DOCDATE) = 1 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0) AS 'JAN ',
    (SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
    (NOLOCK) WHERE MONTH(T1.DOCDATE) = 2 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0)  AS 'FEB ',
    (SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
    (NOLOCK) WHERE MONTH(T1.DOCDATE) = 3 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0)  AS 'MAR ',
    (SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
    (NOLOCK) WHERE MONTH(T1.DOCDATE) = 4 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0)  AS 'APR ',
    (SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
    (NOLOCK) WHERE MONTH(T1.DOCDATE) = 5 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0)  AS 'MAY ',
    (SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
    (NOLOCK) WHERE MONTH(T1.DOCDATE) = 6 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0)  AS 'JUN ',
    (SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
    (NOLOCK) WHERE MONTH(T1.DOCDATE) = 7 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0)  AS 'JUL ',
    (SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
    (NOLOCK) WHERE MONTH(T1.DOCDATE) = 8 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0)  AS 'AUG ',
    (SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
    (NOLOCK) WHERE MONTH(T1.DOCDATE) = 9 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0)  AS 'SEP ',
    (SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
    (NOLOCK) WHERE MONTH(T1.DOCDATE) = 10 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0)  AS 'OCT ',
    (SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
    (NOLOCK) WHERE MONTH(T1.DOCDATE) = 11 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0)  AS 'NOV ',
    (SELECT SUM(T1.QUANTITY) FROM INV1 T1 with
    (NOLOCK) WHERE MONTH(T1.DOCDATE) = 12 AND T1.ITEMCODE = T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())-0)  AS 'DEC '
    FROM dbo.OITM T0
    LEFT JOIN dbo.INV1 T1 ON T1.ItemCode = T0.ItemCode WHERE T0.SellItem = 'Y' and T0.[FirmCode] =[%0]
    GROUP BY T0.ItemCode,T0.Itemname,T0.OnHand,YEAR(T1.DOCDATE) HAVING YEAR(T1.DOCDATE) =
    YEAR(GETDATE())-0
    ORDER BY T0. ITEMCODE

  • How to find total report based on a particular subject area in OBIEE?

    Hi Everyone,
    I am new to OBIEE. I want to find out all the reports based on a particular subject area as there are many subject areas and lot of reports in OBIEE.
    Please help me out in this issue.
    Thanks
    Regards
    Sohail Dayer

    Sohail,
    Check out the catalogue manager reports :
    http://oraclebizint.wordpress.com/2007/11/19/oracle-bi-ee-catalog-reports/
    If you want this kind of thing automated, I personally am very fond of the ODI -> OBIEE Data lineage solution as provided in Oracle By Example tutorials :
    http://www.oracle.com/technology/obe/fusion_middleware/odi/OBI-ODI_Lineage/OBI-ODI_Lineage.htm

  • Authorization of alv report based on plants

    I have created a new alv report for sale order statement.The problem is which can be seen in all plants
    irespective of the user.Suppose our company has 5 palnt
    Plant 1100 to 1500
    The problem is suppose a user he has only rights in a prticular plant but he can see all the palnt sale order details
    How can we authorize this particular alv report based on the plants

    Hello,
    My assumption: You have Company Code(T001-BUKRS) in the selection-screen.
    Plz check the code snippet below:
    DATA:
    IT_PLANT TYPE STANDARD TABLE OF WERKS,
    WA_PLANT LIKE LINE OF IT_PLANT.
    DATA:
    IT_R_WERKS TYPE RANGE_T_WERKS_D,
    R_WERKS TYPE RANGE_S_WERKS_D.
    SELECT BWKEY INTO TABLE IT_PLANT
    FROM T001K
    WHERE BUKRS = '1000'. "--> Here you have to use your sel. scr. parameter
    IF SY-SUBRC = 0.
      SORT IT_PLANT BY WERKS.
    ENDIF.
    LOOP AT IT_PLANT INTO WA_PLANT.
    * Check the authority for the plant
      AUTHORITY-CHECK OBJECT 'M_MSEG_WMB'
               ID 'ACTVT' FIELD '03'
               ID 'WERKS' FIELD WA_PLANT-WERKS.
      IF SY-SUBRC = 0.
        R_WERKS-SIGN = 'I'.
        R_WERKS-OPTION = 'EQ'.
        R_WERKS-LOW = WA_PLANT-WERKS.
        APPEND R_WERKS TO IT_R_WERKS.
        CLEAR R_WERKS.
      ENDIF.
    ENDLOOP.
    IF IT_R_WERKS IS NOT INITIAL.
      "Select data using the Plants for which user is authorised
    ELSE.
      "User has no authority to display any Plant data
    ENDIF.
    Hope this is of some help to you.
    BR,
    Suhas
    Edited by: Suhas Saha on Mar 18, 2009 10:18 AM

  • Bold a single row in a Report based on SQL Query

    Should be easy? So, how do I bold a single row in a report based on SQL query without creating a new template or writing Java for the page? What is the Tabular Form Element "Element Attributes" field for? Or what am I supposed to put in there to make it do anything?

    One way to do this is to add a hidden column to your report which contains the formatting value, for example:
    select empno
    , ename
    , sal
    , decode(empno,1,'font-weight:bold','font-weight:normal') style
    from emp
    Hide the STYLE column.
    Then you can use this column for each column in Column Formatting > HTML expression in this way:
    <span style="#STYLE#">#SAL#</span>
    Unfortunately you have to do this for each colum you want to appear bold.
    good luck,
    Dirk Dral

  • Sales report based on Reason for Rejection

    Hi Guru's,
    I have a requirment to get the list of sales orders( Open/ Close) report based on Reason for Rejection.
    Please makesure it should be standard not customization and using tables.
    Thanks & Regards,
    Subbu.

    Hi subburamaiah
    If you want the report you can create a separate SIS report . In that take the input field  as a Reason for rejection.. and ask for the output the list of sales orders .Now when you check this user defined report you will give the reason for rejection and check what all orders got rejected on that reason for rejection.
    Regards
    Srinath

  • Report based on a reord group - PROBLEM

    Using Reports Server / Forms/Reports 6i
    I am trying to run a report based on a record group on the web. It fails giving the error 'Cannot run report.'
    The report is called from a form and the record group is passed as a data parameter. It works fine in Client/Server.
    I have tried to remove the data parameter and run the report without it but, despite working in the Client/Server environment, it still fails on the Web.
    Does anyone have any suggestions?

    I have found the answer to my problem in the forms forum!
    Apparently, this type of report won't work on the web and I have to use temporary tables!

  • Report Based on XML Data Template is timing out

    Hi there,
    i have an XML publisher report based on an XML data template that i've written. The report is working fine except when there is huge data that is supposed to come out, its timing out. Ive set the db_fetch_size parameter to 20 and scalable_mode to on but its still timing out.
    If anyone has a solutiom or a thought it would be much appreciated.
    Thanks.

    Thanks for the reply.
    Well when i'm opening the report , i wait for about 15 seconds then 'Page Cannot be Displayed' appears on my browser. I'm having this case only when i'm expecting huge data. By huge data i mean that the report gets informations about a deal, when the deal has 10 categories the report runs fine, but when i add all catgories, about 1000, it gives me the 'Page cannot be displayed' error. I'm guessing its a time out issue since i've set the scalable_mode parameter to on. Any thoughts ???

  • Report based on Procedure

    Hi All,
    I have a discoverer report based on a function, function is executed and insert the Data into Global Temporary table. When I try to execute the Function in one Discoverer TAB and Display the Data by SELECTING FROM Global Temporary table in another Discoverer TAB, Data is displayed but when I try to execute the function from same Discoverer TAB and try to select the data, it displayes no rows.
    Please let me know how to accomplish this in one discoverer sheet instead of TWOS..
    Thanks

    Hi All,
    I have a discoverer report based on a function, function is executed and insert the Data into Global Temporary table. When I try to execute the Function in one Discoverer TAB and Display the Data by SELECTING FROM Global Temporary table in another Discoverer TAB, Data is displayed but when I try to execute the function from same Discoverer TAB and try to select the data, it displayes no rows.
    Please let me know how to accomplish this in one discoverer sheet instead of TWOS..
    Thanks

  • Running Aging reports based on Document date in 2007

    Hi All,
    I have an issue while running the Receivables aging report in the 2007 version. The customer usually runs the reports based on the document date. Document date holds more importance in their case.
    However, in the 2007 version, the aging report is totally governed by the posting date. For example, if I change the aging date, the posting date also changes to the aging date and viceversa. If I want to change the aging date to 01/31/09, the posting date u2018Tou2019 automatically changes to 01/31/09 and when we run the report, it will bring in all transactions until the posting date of 01/31/09.
    But, the requirement is to leave the posting date as blank and give the document date u2018Tou2019 01/31/09. This will then pull all transactions until the document date of 01/31/09 irrespective of the posting date.
    As a result, when you run the balance sheet with the document date of 01/31/09, receivables show a different balance. This discrepancy is due to the fact that AR Receivable aging report forces to keep the Aging date = Posting date.
    This was not the case in SAP 2005 version where we were allowed to key in the aging date and the document date to get results based on document date.
    This is very critical as they have recently upgraded from 2005 to 2007 and they are unable to reconcile the balances out of Balance sheet and Aging.
    Please advise.
    Thanks,
    Payal

    Hi Jitin,
    We tried that as well but no luck. There is still a discrepency between what the aging shows and what the BS shows. When we put the Aging date as 01/31/09 and Document date as 01/3109, the posting date 'To' is automatically filled with 01/31/09, so it basically searches for all transactions with the posting date 01/31/09 and document date 01/31/09. This is not the requirement as we do not want to consider the posting date at all while running the aging.
    I also have some screenshots if I can share. I am not sure if I should report this to SAP for further investigation or am I missing something here.
    Thanks for your help.
    Regards,
    Payal
    Edited by: Rui Pereira on May 1, 2009 10:48 AM

Maybe you are looking for