Apache and webLogic Communication
Hi
we are deploying new application and client want to have Apache on one server and weblogic on another server.
Can you pls point to any notes/docs which tells how to configure Apache to have as fronend for applications in weblogic.
Thanks
Sree
Hi
Thanks for the info.
Since we are hosting team we amy not be able to allow/to code. We have existing setup where Oracle HTTP server in DMZ communicates with other report server oc4j using ajp protocol. We are also NOT allowed to use proxy pass.
For a new project we will be using Apache web server in DMZ and weblogic application server inside.
Can you Pls let me know how we can trasfer requestes thru Apache using other protocols like ajp other than proxy.
Thanks
Similar Messages
-
How to configure apache and weblogic in windows 2000
i am novice,
i want to configure apache and weblogic in windows 2000
weblogic version is 6.1
apache version is 2.0
how to do?George,
I would take the following 'first steps'
1)Install Apache20 on your Windows machine following the Apache online documentation
http://httpd.apache.org/docs-2.0/misc/tutorials.html
2)Make sure you can 'serve up' static HTML content from your Apache Server
3)Install Weblogic Server per our online documentation
http://edocs.bea.com/wls/docs61/install/index.html
4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
directly from WLS server
5)Once you have both of the above 'sanity' checks attempt to configure a simple
proxy by ppath or mime type via our online documentation
http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
Chuck Nelson
DRE
BEA Technical Support -
hi all.
i am using oracle application server 10g R2 over windows server 2003 64bit
but now i planned to go for apache and weblogic server for this i do not have idea that
should i do? plz what softwares are required to use apache and weblogic server with current version
10g R2.?The WebLogic Server (WLS) is a Java container similar to OC4J in Application Server 10g release 2. If you want to use WLS, you will have to upgrade your Application Server 10g installation to Fusion Middleware 11g. The upgrade path typically depends on the products which you are using in 10g, e.g. the upgrade path for SOA is different than the upgrade path for Forms/Reports or Oracle Portal. The [url http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10125/before_you_begin.htm]Upgrade Planning Guide is a good start.
Thanks,
EJ -
Proxy between Apache and Weblogic
Hi ,
I need to configure a proxy server in between Apache and Weblogic which means not all the requests should go through proxy, only one particular request should go from apache to proxy server and proxy server to Weblogic. Can any one help me how to configure this and how it is going to work.
Regards,
VamseeNot exactly sure.However can we use proxying by MIME type here
http://download.oracle.com/docs/cd/E13222_01/wls/docs100/plugins/apache.html#wp132216
Regards -
Configuring apache and weblogic 7.1
have anyone tried connecting apache and weblogic 7.1. which service pack can be used for this purpose
have anyone tried connecting apache and weblogic 7.1. which service pack can be used for this purpose
-
SSL Connection Configuration between Apache and Weblogic 8,1
I'm currently using Apache web server as a front end server for Weblogic server 8.1 and now i' facing some configuration problem to setting up the SSL connection between this 2 server. When i open my web application page, it shows
Failure of Server Apache bridge
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
and my proxy.log shows:
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: SSL is configured
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: SSL configured successfully
Thu Nov 03 09:36:41 2011 <182413202842013> Using Uri /favicon.ico
Thu Nov 03 09:36:41 2011 <182413202842013> After trimming path: '/favicon.ico'
Thu Nov 03 09:36:41 2011 <182413202842013> The final request string is '/favicon.ico'
Thu Nov 03 09:36:41 2011 <182413202842013> SEARCHING id=[ebwdsk298.ebworx.com:7002] from current ID=[ebwdsk298.ebworx.com:7002]
Thu Nov 03 09:36:41 2011 <182413202842013> The two ids matched
Thu Nov 03 09:36:41 2011 <182413202842013> @@@FOUND...id=[ebwdsk298.ebworx.com:7002], server_name=[10.122.50.218], server_port=[80]
Thu Nov 03 09:36:41 2011 <182413202842013> attempt #0 out of a max of 5
Thu Nov 03 09:36:41 2011 <182413202842013> general list: trying connect to '10.122.50.48'/7002/7002 at line 2696 for '/favicon.ico'
Thu Nov 03 09:36:41 2011 <182413202842013> New SSL URL: match = 0 oid = 22
Thu Nov 03 09:36:41 2011 <182413202842013> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Thu Nov 03 09:36:41 2011 <182413202842013> EINPROGRESS in connect() - selecting
Thu Nov 03 09:36:41 2011 <182413202842013> Setting peerID for new SSL connection
Thu Nov 03 09:36:41 2011 <182413202842013> 0a7a 3230 5a1b 0000 .z20Z...
Thu Nov 03 09:36:41 2011 <182413202842013> Local Port of the socket is 2121
Thu Nov 03 09:36:41 2011 <182413202842013> Remote Host 10.122.50.48 Remote Port 7002
Thu Nov 03 09:36:41 2011 <182413202842013> general list: created a new connection to '10.122.50.48'/7002 for '/favicon.ico', Local port:2121
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Host]=[10.122.50.218]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Connection]=[keep-alive]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Accept]=[*/*]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[User-Agent]=[Mozilla/5.0 (Windows NT 5.1) AppleWebKit/535.1 (KHTML, like Gecko) Chrome/14.0.835.163 Safari/535.1]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Accept-Encoding]=[gzip,deflate,sdch]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Accept-Language]=[en-US,en;q=0.8]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.3]
Thu Nov 03 09:36:41 2011 <182413202842013> URL::sendHeaders(): meth='GET' file='/favicon.ico' protocol='HTTP/1.1'
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Host]=[10.122.50.218]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Accept]=[*/*]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[User-Agent]=[Mozilla/5.0 (Windows NT 5.1) AppleWebKit/535.1 (KHTML, like Gecko) Chrome/14.0.835.163 Safari/535.1]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Accept-Encoding]=[gzip,deflate,sdch]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Accept-Language]=[en-US,en;q=0.8]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.3]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Connection]=[Keep-Alive]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[WL-Proxy-Client-IP]=[10.122.50.48]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Proxy-Client-IP]=[10.122.50.48]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[X-Forwarded-For]=[10.122.50.48]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Thu Nov 03 09:36:41 2011 <182413202841921> INFO: No session match found
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: No CA was trusted, validation failed
Thu Nov 03 09:36:41 2011 <182413202841921> INFO: DeleteSessionCallback
Thu Nov 03 09:36:41 2011 <182413202842013> ERROR: SSLWrite failed
Thu Nov 03 09:36:41 2011 <182413202842013> SEND failed (ret=-1) at 789 of file ../nsapi/URL.cpp
Thu Nov 03 09:36:41 2011 <182413202842013> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 790 of ../nsapi/URL.cpp
Thu Nov 03 09:36:41 2011 <182413202842013> Marking 10.122.50.48:7002 as bad
Thu Nov 03 09:36:41 2011 <182413202842013> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 790 of ../nsapi/URL.cpp]: at line 3078
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: Closing SSL context
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: Error after SSLClose, socket may already have been closed by peer
Thu Nov 03 09:36:41 2011 <182413202842013> Failing over after WRITE_ERROR_TO_SERVER exception in sendRequest()
Can anyone tell me what should i do in order to correct this error? Your help is kindly appreciate!!! Please~1) Is the managed server up?
2) from apache server are you able to bind the managed server port?
3) can you pls send the weblogic ssl configuration? -
Apache and weblogic proxying not happening properly
Hi,
I am trying to proxy my request from my apache installation to weblogic installation.
I am able to proxy request to the default page of my application in weblogic.
But when trying to browse through that page I am getting error.
Basically, It tries to listen at 7501 port of my machine(apache machine) only
and is not trying to listen at 80 port of my machineso that it can be proxied
to the 7501 port of weblogic machine.
I am unable to figure out the issue. Maybe u can help me from ur experience.
I get an exception saying:
###<Apr 28, 2003 9:53:47 PM IST> <Warning> <Entitlements> <blrkec09630a> <portalServer>
<ExecuteThread: '10' for queue: 'default'> <kernel identity> <16:b7687ce40e05e9a9>
<402716> <Missing entitlments configuration asset.>
Exception[com.bea.p13n.rules.manager.RuleSetNotFoundException: The rule set with
URI /entitlements/GlobalEntitlements.rls could not be located by the class named
com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager.]
at com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager.getRuleSet(RuleSetPersistenceManager.java:385)
at com.bea.p13n.rules.manager.internal.ContextPool.<init>(ContextPool.java:156)
at com.bea.p13n.rules.manager.internal.ContextPoolFactory.createContextPool(ContextPoolFactory.java:164)
at com.bea.p13n.rules.manager.internal.ContextPoolFactory.getContextPool(ContextPoolFactory.java:223)
at com.bea.p13n.rules.manager.internal.RulesManagerImpl.getContext(RulesManagerImpl.java:469)
at com.bea.p13n.rules.manager.internal.RulesManagerImpl.evaluate(RulesManagerImpl.java:350)
at com.bea.p13n.rules.manager.internal.RulesManagerImpl.evaluateRuleSet(RulesManagerImpl.java:148)
at com.bea.p13n.rules.manager.internal.RulesManagerImpl_mcr6qe_EOImpl.evaluateRuleSet(RulesManagerImpl_mcr6qe_EOImpl.java:448)
at com.bea.p13n.entitlements.rolemapper.RoleMapper.mapRoles(RoleMapper.java:179)
at com.bea.p13n.entitlements.accesscontroller.AccessController.isAccessAllowed(AccessController.java:143)
at com.bea.portal.entitlement.util.EntitlementHelper.isAccessAllowed(EntitlementHelper.java:285)
at com.bea.portal.entitlement.util.EntitlementHelper.checkEntitlementInternal(EntitlementHelper.java:231)
at com.bea.portal.entitlement.util.EntitlementHelper.checkEntitlement(EntitlementHelper.java:144)
at com.bea.portal.manager.internal.UserPortalStatePolicy.checkPortletEntitlement(UserPortalStatePolicy.java:636)
at com.bea.portal.manager.internal.UserPortalStatePolicy.generateUserPageState(UserPortalStatePolicy.java:567)
at com.bea.portal.manager.internal.UserPortalStatePolicy.generateUserPortalState(UserPortalStatePolicy.java:293)
at com.bea.portal.manager.internal.PortalManagerDelegateImpl.getUserPortalState(PortalManagerDelegateImpl.java:179)
at com.bea.portal.manager.ejb.internal.PortalManagerBean.getUserPortalState(PortalManagerBean.java:70)
at com.bea.portal.manager.ejb.internal.PortalManagerBean_w6xny9_EOImpl.getUserPortalState(PortalManagerBean_w6xny9_EOImpl.java:370)
at com.bea.portal.appflow.internal.PortalRequestImpl.getPortalState(PortalRequestImpl.java:148)
at com.bea.portal.render.servlets.jsp.PortalRenderHelper.getSelectedSkin(PortalRenderHelper.java:167)
at jsp_servlet._framework._security.__login._jspService(login.inc:11)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:445)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:20)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.RequestDispatcherImpl$ForwardAction.run(RequestDispatcherImpl.java:345)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:780)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:252)
at com.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doGet(WebflowServlet.java:178)
at com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.doGet(PortalWebflowServlet.java:235)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:401)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:20)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at com.bea.p13n.tracking.clickthrough.ClickThroughEventFilter.doFilter(ClickThroughEventFilter.java:156)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5451)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:780)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3105)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2588)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
Regards,
Vinod ThapliyalThe WebLogic Server (WLS) is a Java container similar to OC4J in Application Server 10g release 2. If you want to use WLS, you will have to upgrade your Application Server 10g installation to Fusion Middleware 11g. The upgrade path typically depends on the products which you are using in 10g, e.g. the upgrade path for SOA is different than the upgrade path for Forms/Reports or Oracle Portal. The [url http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10125/before_you_begin.htm]Upgrade Planning Guide is a good start.
Thanks,
EJ -
Apache and Weblogic authentication
Apache 2.0 and WL 8.1 SP6;
Apache redirects to a wl web app and the web app's front page is password protected using Apache's authentication services.
Turns out, the users configured with Apache's 'htpasswd' have to be duplicated in weblogic. Curious to know why this is. There appears to be no documentation of this necessity that I could find.
Any ideas about the configuration principles involved here?
Thanks,
KarolyHi Scott,
The only way it can work is when Apache adds another token to the request
say
MyToken : value
U can create a Custom Identity Asserter to read that token and authenticate the user.
U can find the steps to create custom identity asserter here
http://weblogic-wonders.com/weblogic/2010/03/15/custom-identity-asserter-for-weblogic-server/
HTH,
Faisal -
Apache and Weblogic - Performance issue
Hi Anuj,
This question should be directed to the weblogic.developer.interest.plug-in
group.
Regarding this issue, this is normal -- the access.log for WebLogic shows
the requests from the proxy. But, instead of showing you the IP address of
the proxy server, it instead shows you the IP address of the client. You
can also verify that this is a different request because the connection to
the proxy server used HTTP/1.1, and the connection to WLS used HTTP/1.0 --
this is the protocol that the proxy plug-in uses to communicate with WLS.
So, in summary, there is only one request made by the client per image, and
the plug-in is in turn making a request to WLS for each image.
Dennis Munsie
Developer Relations Engineer
BEA Support
"Anuj Nijhawan" <[email protected]> wrote in message
news:3c20e890$[email protected]..
>
We have a setup with apache acting as web server and BEA as app server.But it
seems both of them are serving images to the web browser at the same time.This
is consuming lots of memory. Can anybody help rectifing this,
here's what each log file's say,
first Apache (access_log) shows that it served it up:
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET /img/divider.gif
HTTP/1.1"
304 0
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET
/img/i_user_collection.gif
HTTP/1.1" 304 0
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET
/img/sort_last_manual.gif H
Then BEA (access.log) shows it too:
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET /img/divider.gif
HTTP/1.0"
304 0
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET
/img/i_user_collection.gif
HTTP/1.0" 304 0
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET
/img/sort_manual.gif HTTP/1
.0" 304 0 -
Hi All,
I have installed apache well and as per the documents i could read that the apache related plugins are present under weblogic_home/server/bin
but its clear in the apache guide that the plugins are not available for weblogic 10.3 release.which we have to download externally and put it in the apache server.
can some one let me know where can i find these zip files which contain mod_jk plugins
Thanks in Advance....I find this very confusing, finding the Apache plugins for 10.3.x. After searching around, looking into the download categories that I would think are relevant, I found nothing. I don't really need support information, support site requires its own logins and everything, and I just want that little piece of software. I ended up finding the direct link on http://vikashazrati.wordpress.com/2009/10/10/apache-weblogic-ubuntu/. This is very much not encouraging...
-
CONNECTION_REFUSED - Apache and WebLogic
Hi guys,
My environment is the following:
- Apache 2.2. with mod_weblogic loaded
- The Apache is setup in a Microsoft Cluster with the IP 10.100.5.227
- The configuration for load balancing is the following:
WebLogicCluster 10.100.5.200:18005,10.100.5.202:18005,10.100.5.204:18005
I'm always getting this error:
2012-06-27T11:52:10.0701-06:00 <12604134081952987676> *******Exception type [CONNECTION_REFUSED] (apr_socket_connect call failed with error=730061, host=10.100.5.227, port=18005 ) raised at line 1582 of ../common/URL.cpp
2012-06-27T11:52:10.0701-06:00 <12604134081952987676> initJVMID: Failed to retrieve JVMID for 10.100.5.227:18005:0
2012-06-27T11:52:29.5185-06:00 <12604134081954887725> *******Exception type [CONNECTION_REFUSED] (apr_socket_connect call failed with error=730061, host=10.100.5.227, port=18005 ) raised at line 1582 of ../common/URL.cpp
2012-06-27T11:52:29.5185-06:00 <12604134081954887725> initJVMID: Failed to retrieve JVMID for 10.100.5.227:18005:0
Why? I'm sending requests to 10.100.5.200:18005,10.100.5.202:18005,10.100.5.204:18005, not for the Apache IP in the Microsoft Cluster.
Do you have any idea?
Thanks a lotAnd the result from __WebLogicBridgeConfig is the following:
General Server List:
Host: '10.100.5.227' Port: 18005 SecurePort: 0 Status: Server Down!
Host: '10.100.5.204' Port: 18005 SecurePort: 0 Status: OK
Strange, because I've 3 managed servers in WebLogicCluster... -
Apache httpd.conf and Weblogic server integration.
Dear friends,
I am seeing a strange problem in my Apache and weblogic integration work.
In the Apache httpd.conf file, under mod_weblogic.c module, if i dont turn DebugConfigInfo ON then my system is not working properly. always hitting with http 404 error. can you please explain why this is required and if required is it mandatory to turn it ON ?
when i read in weblogic docs, its mentioned as to turn it OFF for security reasons. But if i make it as OFF then my website is not working properly.
Here is the conents of mod_weblogic.c module in my httpd.conf file.
<IfModule mod_weblogic.c>
WebLogicHost rlw1csts08.bpweb.bp.com
WebLogicPort 7001
DebugConfigInfo On
#EnforceBasicConstraints OFF
PathPrepend /csmain-web
ErrorPage /err/serverErrorWL.xml
#WLLogFile "| /export/home/wwwst08/apache/bin/rotatelogs /export/home/wwwst08/apache/logs/WL_apache_error.log.%Y%m%d%H%M%S 86400"
WLLogFile "/export/home/wwwst08/apache/logs/WL_apache_error.log"
</IfModule>
Please let me know your inputs. Its very urgent.
Thanks
subba.I donot have the complete httpd.conf with me right now but you have to follow the following steps:
1) Compile Apache with ssl module included
2) Instead of Port 80 change the port to 443 at global level or at virtual directory level
3) If u want to redirect the traffic on port 80 to port 443 then also include mod_rewrite module while compiliing apache and write a rule to redirect the traffic from port 80 to 443 -
Apache Virtual Hosts and Weblogic 5.1SP6
Running:
WebLogic Server 5.1.0 w/ Service Pack 6
Solaris 7
Hello, I've been reading through the newsgroups and saw alot of information on
setting up apache and weblogic to handle virtual hosts, but am still having problems
getting it to work.
I have 2 domains that will be served up by one instance of Apache using NameBased
virtual hosts and I would like to have our one instance of WebLogic 5.1SP6 handle
them as well.
Excerpt from my httpd.conf file:
NameVirtualHost 216.xx.x.xx:80
<VirtualHost vcstgws011:80>
ServerName vcstgws011.domain1.com
Port 80
DocumentRoot /opt/vci-10.8/webapps/www
DirectoryIndex index.jsp
<Directory "/opt/vci-10.8/webapps/www">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
<VirtualHost vcstgws011:80>
ServerName www.domain2.com
Port 80
DocumentRoot /opt/vci-10.8/webapps/www/dsl
DirectoryIndex index.jsp
<Directory "/opt/vci-10.8/webapps/www">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
Under my default server configuration I have the WebLogic stuff:
<IfDefine WL>
WebLogicCluster vcstgas011.domain1.com:7001
Debug on
DebugConfigInfo on
ConnectTimeoutSecs 60
HungServerRecoverSecs 300
Debug on
DebugConfigInfo on
<Files *.jsp>
SetHandler weblogic-handler
</Files>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
<Location /servlet>
SetHandler weblogic-handler
</Location>
<Location /Admin*>
SetHandler weblogic-handler
</Location>
<Location /j_security_check>
SetHandler weblogic-handler
</Location>
</IfDefine>
And here's an excerpt from my weblogic.properties file:
# HTTPD
weblogic.httpd.enable=true
# DocumentRoot configuration
weblogic.httpd.defaultWebApp=/opt/vci-10.8/webapps/www
weblogic.httpd.indexDirectories=true
Any help would be appreciated.
Thanks,
MarkAnyone have success with Name-Based virtual hosts using same instance of WebLogic?
"Mark Mangano" <[email protected]> wrote:
>
Running:
WebLogic Server 5.1.0 w/ Service Pack 6
Solaris 7
Hello, I've been reading through the newsgroups and saw alot of information
on
setting up apache and weblogic to handle virtual hosts, but am still
having problems
getting it to work.
I have 2 domains that will be served up by one instance of Apache using
NameBased
virtual hosts and I would like to have our one instance of WebLogic 5.1SP6
handle
them as well.
Excerpt from my httpd.conf file:
NameVirtualHost 216.xx.x.xx:80
<VirtualHost vcstgws011:80>
ServerName vcstgws011.domain1.com
Port 80
DocumentRoot /opt/vci-10.8/webapps/www
DirectoryIndex index.jsp
<Directory "/opt/vci-10.8/webapps/www">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
<VirtualHost vcstgws011:80>
ServerName www.domain2.com
Port 80
DocumentRoot /opt/vci-10.8/webapps/www/dsl
DirectoryIndex index.jsp
<Directory "/opt/vci-10.8/webapps/www">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
Under my default server configuration I have the WebLogic stuff:
<IfDefine WL>
WebLogicCluster vcstgas011.domain1.com:7001
Debug on
DebugConfigInfo on
ConnectTimeoutSecs 60
HungServerRecoverSecs 300
Debug on
DebugConfigInfo on
<Files *.jsp>
SetHandler weblogic-handler
</Files>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
<Location /servlet>
SetHandler weblogic-handler
</Location>
<Location /Admin*>
SetHandler weblogic-handler
</Location>
<Location /j_security_check>
SetHandler weblogic-handler
</Location>
</IfDefine>
And here's an excerpt from my weblogic.properties file:
# HTTPD
weblogic.httpd.enable=true
# DocumentRoot configuration
weblogic.httpd.defaultWebApp=/opt/vci-10.8/webapps/www
weblogic.httpd.indexDirectories=true
Any help would be appreciated.
Thanks,
Mark -
Nedd to configure apache-bea weblogic plugin for apache2 on solaris 10
Hi,
I have an apache server and a bea weblogic application server. For security reasons, I wold like to configure a bea plugin on the apache server to redirect the client http/https requests from the apache2 server to bea application server.
I have gone through the bea documentation and configure my apache2 httpd.conf as follows
LoadModule weblogic_module modules/mod_wl_20.so
<IfModule mod_weblogic.c>
WebLogicHost myweblogic.server.com
WebLogicPort 7001
MatchExpression *.jsp
</IfModule>
<Location /weblogic>
WebLogicHost myweblogic.server.com
WebLogicPort 7001
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
Then Restarted the apache2 and tryied to acces bea application through http://myweblogic.server.com/weblogic/
and http://myweblogic.server.com/something.jsp
It did not work
httpd is started propery.
Any help would be highly apreciated
Many Thanks
Ushas SymonThe Web server plug-ins do not natively support outbound SSL connections
yet(i.e. SSL from the plug-in to WebLogic). This is a feature for version
6.0. You can use SSL from the browser to Apache or from the browser to
WebLogic directly.
The majority of our customers use strict firewall rules to protect the
traffic between Apache and WebLogic. If they are paranoid, they use an SSL
proxy or a VPN product.
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Josh Kwan" <[email protected]> wrote in message
news:39d4e8a5$[email protected]..
>
Hello,
I want to know how to connect Apache 1.3.12 with mod_ssl to BEA WebLogic5.1.0 on Solaris via HTTPS. I have heard that this can only work over t3...
is that true? If so, how can it be done securely? If that isn't the case,
how can httpd.conf/weblogic.conf be configured on the Apache server to talk
to the WebLogic server on port 7002? Both of the machines I am using are
running Solaris 7 with necessary patches. I have installed SP5 for WebLogic
and I have copied mod_wl.so and mod_wl_ssl.o to the Apache server for
inclusion as modules.
>
The two servers communicate correctly over HTTP, but I want to be able toserve some JSPs via HTTPS from the WebLogic server through the Apache web
server. I have generated all the required CA and server certificates for
each server, and they both individually answer HTTPS requests, but do not
work when an HTTPS request is sent to the Apache server for a JSP that is
served from the WebLogic server. I read somewhere in the documentation for
5.1.0 that WebLogic will communicate via HTTPS to various web and proxy
servers.
>
Any help would be greatly appreciated... thanks!
Regards,
Josh Kwan
Sr. Systems Engineer
iXL -
I have a problem with using Apache 2.2.3 as a WebLogic SSL proxy. I have Apache 2.2 running and successfully configured an SSL cert, config in ssl.conf is...
<VirtualHost secure.daftdonkey.com>
# Setup SSL for secure.daftdonkey.com
ServerName secure.daftdonkey.com
SSLEngine On
SSLCertificateFile /oracle/secure/secure.daftdonkey.com.crt
SSLCertificateKeyFile /oracle/secure/secure.daftdonkey.com.key
SSLCertificateChainFile /oracle/secure/gd_bundle.crt
</VirtualHost>
This works fine
Now I want Apache to proxy requests to my WebLogic Server and secure them over SSL as well
e.g. a request to https://secure.daftdonkey.com/service goes to https://weblogic.internal.site/service
I have downloaded and configured the weblogic module and tested it handling traffic for HTTP and that worked, then I switched the WebLogic module to use SSL.
LoadModule weblogic_module modules/mod_wl.so
<IfModule mod_weblogic.c>
WebLogicHost weblogic.internal.site
WebLogicPort 16101
Debug ALL
SecureProxy ON
WLSSLWallet /oracle/secure/my-wallet
WLLogFile /tmp/wl-proxy.log
</IfModule>
<Location /service>
SetHandler weblogic-handler
</Location>
Starting Apache throws the error. I think this is my main problem, i've searched support.oracle.com and not found anything.
[Mon Jun 07 23:00:48 2010] [crit] (20014)Internal error: WL SSL Init failed for server: (null) on 0
but Apache starts... I get this error when I make a request to https://secure.daftdonkey.com/service
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
Looking into the log /tmp/wl-proxy.log I see....
Mon Jun 7 22:30:10 2010 <393212759749971> URLfactory Created
Mon Jun 7 22:30:10 2010 <393312759750102> ================New Request: [GET /service HTTP/1.1] =================
Mon Jun 7 22:30:10 2010 <393312759750102> INFO: SSL is configured
Mon Jun 7 22:30:10 2010 <393312759750102> Using Uri /service
Mon Jun 7 22:30:10 2010 <393312759750102> After trimming path: '/service'
Mon Jun 7 22:30:10 2010 <393312759750102> The final request string is '/service'
Mon Jun 7 22:30:10 2010 <393312759750102> parseServerList: Socket Address hostnames 'weblogic.internal.site:16101'
Mon Jun 7 22:30:10 2010 <393312759750102> Host extracted from serverlist is [weblogic.internal.site]
Mon Jun 7 22:30:10 2010 <393312759750102> parseServerList: IP from socket Address [192.168.100.15]
Mon Jun 7 22:30:10 2010 <393312759750102> Initializing lastIndex=0 for a list of length=1
Mon Jun 7 22:30:10 2010 <393312759750102> getListNode: created a new server node: id='weblogic.internal.site:16101' server_name='secure.daftdonkey.com', port='443'
Mon Jun 7 22:30:10 2010 <393312759750102> attempt #0 out of a max of 5
Mon Jun 7 22:30:10 2010 <393312759750102> Trying a pooled connection for '192.168.100.15/16101/16101'
Mon Jun 7 22:30:10 2010 <393312759750102> getPooledConn: found a host and port/securePort match
Mon Jun 7 22:30:10 2010 <393312759750102> getPooledConn: No more connections in the pool for Host[192.168.100.15] Port[16101] SecurePort[16101]
Mon Jun 7 22:30:10 2010 <393312759750102> general list: trying connect to '192.168.100.15'/16101/16101 at line 3188 for '/service'
Mon Jun 7 22:30:10 2010 <393312759750102> SSL is not configured for this connection
Mon Jun 7 22:30:10 2010 <393312759750102> Local Port of the socket is 45580
Mon Jun 7 22:30:10 2010 <393312759750102> Remote Host 192.168.100.15 Remote Port 16101
Mon Jun 7 22:30:10 2010 <393312759750102> URL::connect SSLConn for reader is not set as it is NULL
Mon Jun 7 22:30:10 2010 <393312759750102> general list: created a new connection to '192.168.100.15'/16101 for '/service', Local port:0
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Host]=[secure.daftdonkey.com]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept-Language]=[en-us,en;q=0.5]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept-Encoding]=[gzip,deflate]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Keep-Alive]=[300]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Connection]=[keep-alive]
Mon Jun 7 22:30:10 2010 <393312759750102> parse_header is done
Mon Jun 7 22:30:10 2010 <393312759750102> Method is GET
Mon Jun 7 22:30:10 2010 <393312759750102> About to call parseHeaders
Mon Jun 7 22:30:10 2010 <393312759750102> URL::parseHeaders: Value of parsedHeaders = [0]
Mon Jun 7 22:30:10 2010 <393312759750102> URL::sendHeaders(): meth='GET' file='/service' protocol='HTTP/1.1'
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Host]=[secure.daftdonkey.com]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept-Language]=[en-us,en;q=0.5]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept-Encoding]=[gzip,deflate]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Keep-Alive]=[300]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Connection]=[Keep-Alive]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [WL-Proxy-SSL]=[true]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [WL-Proxy-Client-IP]=[192.168.100.245]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Proxy-Client-IP]=[192.168.100.245]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [X-Forwarded-For]=[192.168.100.245]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [X-WebLogic-KeepAliveSecs]=[30]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [X-WebLogic-Force-JVMID]=[unset]
Mon Jun 7 22:30:10 2010 <393312759750102> Reader::fill(): first=0 last=0 toRead=4096
Mon Jun 7 22:30:10 2010 <393312759750102> Reader::fill(): sysRecv returned -1
Mon Jun 7 22:30:10 2010 <393312759750102> *******Exception type [READ_ERROR_FROM_SERVER] (socket read failure) raised at line 251 of ../nsapi/Reader.cpp
Mon Jun 7 22:30:10 2010 <393312759750102> caught exception in readStatus: READ_ERROR_FROM_SERVER [os error=104, line 251 of ../nsapi/Reader.cpp]: socket read failure at line 963
Mon Jun 7 22:30:10 2010 <393312759750102> PROTOCOL_ERROR: Backend Server not responding - isRecycled:0
Mon Jun 7 22:30:10 2010 <393312759750102> Marking 192.168.100.15:16101 as bad
Mon Jun 7 22:30:10 2010 <393312759750102> got exception in sendRequest phase: Backend Server not responding at line 3702
Mon Jun 7 22:30:10 2010 <393312759750102> Failing over after sendRequest() exception: PROTOCOL_ERROR as Idempotent is set to ON
Mon Jun 7 22:30:10 2010 <393312759750102> attempt #1 out of a max of 5
However connecting directly to https://192.168.100.15:16101/irm_rights is successful.
Ouput from orapki seems to show a valid wallet.
[root@content my-wallet]# /oracle/install/bin/orapki wallet display -wallet /oracle/secure/my-wallet/
Oracle PKI Tool : Version 11.1.1.2.0
Copyright (c) 2004, 2009, Oracle and/or its affiliates. All rights reserved.
Requested Certificates:
User Certificates:
Trusted Certificates:
Subject: OU=Class 2 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: OU=Secure Server Certification Authority,O=RSA Data Security\, Inc.,C=US
Subject: OU=Class 3 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: OU=Class 1 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: CN=weblogic.internal.site,OU=FOR TESTING ONLY,O=MyOrganization,L=MyTown,ST=MyState,C=US
Subject: CN=GTE CyberTrust Global Root,OU=GTE CyberTrust Solutions\, Inc.,O=GTE Corporation,C=US
Also the apache log at /var/log/httpd/ssl_error_log shows.
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
Editing the httpd.conf and sending traffic from Apache to WebLogic over regular HTTP works, config is...
LoadModule weblogic_module modules/mod_wl.so
<IfModule mod_weblogic.c>
WebLogicHost weblogic.internal.site
WebLogicPort 16100
Debug ALL
# SecureProxy ON
# WLSSLWallet /oracle/secure/my-wallet
WLLogFile /tmp/wl-proxy.log
</IfModule>
Resulting detail from /tmp/wl-proxy.log
Mon Jun 7 23:20:50 2010 <415912759780351> URLfactory Created
Mon Jun 7 23:20:50 2010 <416012759780502> ================New Request: [GET /service/ HTTP/1.1] =================
Mon Jun 7 23:20:50 2010 <416012759780502> Using Uri /service/
Mon Jun 7 23:20:50 2010 <416012759780502> After trimming path: '/service/'
Mon Jun 7 23:20:50 2010 <416012759780502> The final request string is '/service/'
Mon Jun 7 23:20:50 2010 <416012759780502> parseServerList: Socket Address hostnames 'weblogic.internal.site:16100'
Mon Jun 7 23:20:50 2010 <416012759780502> Host extracted from serverlist is [weblogic.internal.site]
Mon Jun 7 23:20:50 2010 <416012759780502> parseServerList: IP from socket Address [192.168.100.15]
Mon Jun 7 23:20:50 2010 <416012759780502> Initializing lastIndex=0 for a list of length=1
Mon Jun 7 23:20:50 2010 <416012759780502> getListNode: created a new server node: id='weblogic.internal.site:16100' server_name='secure.daftdonkey.com', port='443'
Mon Jun 7 23:20:50 2010 <416012759780502> attempt #0 out of a max of 5
Mon Jun 7 23:20:50 2010 <416012759780502> Trying a pooled connection for '192.168.100.15/16100/16100'
Mon Jun 7 23:20:50 2010 <416012759780502> getPooledConn: found a host and port/securePort match
Mon Jun 7 23:20:50 2010 <416012759780502> getPooledConn: No more connections in the pool for Host[192.168.100.15] Port[16100] SecurePort[16100]
Mon Jun 7 23:20:50 2010 <416012759780502> general list: trying connect to '192.168.100.15'/16100/16100 at line 3188 for '/service/'
Mon Jun 7 23:20:50 2010 <416012759780502> SSL is not configured for this connection
Mon Jun 7 23:20:50 2010 <416012759780502> Local Port of the socket is 56647
Mon Jun 7 23:20:50 2010 <416012759780502> Remote Host 192.168.100.15 Remote Port 16100
Mon Jun 7 23:20:50 2010 <416012759780502> URL::connect SSLConn for reader is not set as it is NULL
Mon Jun 7 23:20:50 2010 <416012759780502> general list: created a new connection to '192.168.100.15'/16100 for '/service/', Local port:0
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Host]=[secure.daftdonkey.com]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept-Language]=[en-us,en;q=0.5]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept-Encoding]=[gzip,deflate]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Keep-Alive]=[300]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Connection]=[keep-alive]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Cookie]=[JSESSIONID=YF4nMNfZ3lJ5ZrVV9HGpKwj3hf12yRvlf4zksQf6pkKx2LhJ2ywY!34167467]
Mon Jun 7 23:20:50 2010 <416012759780502> parse_header is done
Mon Jun 7 23:20:50 2010 <416012759780502> Method is GET
Mon Jun 7 23:20:50 2010 <416012759780502> About to call parseHeaders
Mon Jun 7 23:20:50 2010 <416012759780502> URL::parseHeaders: Value of parsedHeaders = [0]
Mon Jun 7 23:20:50 2010 <416012759780502> URL::sendHeaders(): meth='GET' file='/service/' protocol='HTTP/1.1'
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Host]=[secure.daftdonkey.com]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept-Language]=[en-us,en;q=0.5]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept-Encoding]=[gzip,deflate]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Keep-Alive]=[300]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Cookie]=[JSESSIONID=YF4nMNfZ3lJ5ZrVV9HGpKwj3hf12yRvlf4zksQf6pkKx2LhJ2ywY!34167467]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Connection]=[Keep-Alive]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [WL-Proxy-SSL]=[true]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [WL-Proxy-Client-IP]=[192.168.100.245]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Proxy-Client-IP]=[192.168.100.245]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [X-Forwarded-For]=[192.168.100.245]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [X-WebLogic-KeepAliveSecs]=[30]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [X-WebLogic-Force-JVMID]=[unset]
Mon Jun 7 23:20:50 2010 <416012759780502> Reader::fill(): first=0 last=0 toRead=4096
Mon Jun 7 23:20:50 2010 <416012759780502> Reader::fill(): sysRecv returned 568
Mon Jun 7 23:20:50 2010 <416012759780502> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 302 Moved Temporarily]
Mon Jun 7 23:20:50 2010 <416012759780502> URL::parseHeaders: StatusLine set to [302 Moved Temporarily]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[Date]=[Tue, 08 Jun 2010 06:20:50 GMT]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[Transfer-Encoding]=[chunked]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[Location]=[https://secure.daftdonkey.com/service/faces/LoginPage.jspx]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[X-WebLogic-JVMID]=[34167467]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Mon Jun 7 23:20:50 2010 <416012759780502> parsed all headers OK
Mon Jun 7 23:20:50 2010 <416012759780502> done with sendRequest
Mon Jun 7 23:20:50 2010 <416012759780502> sendResponse() : r->status = '302'
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to client (add):[Date]=[Tue, 08 Jun 2010 06:20:50 GMT]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to client (add):[Location]=[https://secure.daftdonkey.com/service/faces/LoginPage.jspx]
Mon Jun 7 23:20:50 2010 <416012759780502> for 192.168.100.15/16100/16100, updated JVMID: 34167467
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to client (add):[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Mon Jun 7 23:20:50 2010 <416012759780502> calling closeConn() with non-null URL* at 3826
Mon Jun 7 23:20:50 2010 <416012759780502> canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
Mon Jun 7 23:20:50 2010 <416012759780502> closeConn: pooling for '192.168.100.15/16100'
Mon Jun 7 23:20:50 2010 <416012759780502> closeConn: pooling '0'
Mon Jun 7 23:20:50 2010 <416012759780502> request [irm_rights/] processed successfully..................
Mon Jun 7 23:20:50 2010 <415912759780351> Cleaning up the list node 'weblogic.internal.site:16100'list Length '1'I found the answer to this. The documentation is not clear enough, LD_LIBRARY_PATH MUST be set and MUST have a pointer to the directory where the SSL .so modules are. I wrote up a blog article explaining the configuration and detailed this issue.
http://blogs.oracle.com/irm/2010/06/quick_guide_to_oracle_irm_11g_1.html
Maybe you are looking for
-
Returning several values from a C native method
Hi, I need to return 3 values from a native methode : an int (the return code), a string of variable length and a double. In pure C, my function would be defined as "int f ( char* s, double* d)", and I would "malloc" the string into the calling funct
-
My MacBook doesn't seem to be charging when it's plugged into the power outlet. I have tried restarting, plugging it in again and other outlets...at least 3 times each. It was working earlier today.
-
I have a Macbook Pro with the Nvidia 9600M GT 512MB. I recently purchased the minidisplay port to VGA adapter to drive my Sony GDM-FW900 (a 24" widescreen CRT). Leopard recognizes the display and gives me a list of supported resolutions. The problem
-
Share to Youtube Vertical Green Bar
Whenever I export a video in the most recent FCP, using File>Share>Youtube the compressed video file has a green bar on the right side of the frame. I have exported 4x3 and 16x9 and both have the green line. You can see what I mean here: http://vimeo
-
Why can't I block certain people face timing and imessageing me? I keep receiving random facetime calls every 5 minutes got to the point where I have has to turn facetime off.