Apache Changes Site Config on Web Start

Hello,
I have successfully gotten SVN to work with WebDAV on Snow Leopard Server 10.6.1 following this guide: http://developer.apple.com/mac/articles/server/subversionwithxcode3.html.
However, whenever I reboot the server or restart web services, the location node changes. Specifically, the line DAV svn is changed to DAV Off. I have WebDAV enable in the config and in server manager, so it's just this location, or "Realm", that seems to experience this behavior. I then have to go into the site config file and update that line. Of course, I can only do this while the server is active, or it will edit the line again when I start the service.
<Location "/svn/">
DAV svn
SVNParentPath Path/To/My/SVN
AuthType Basic
<Limit GET HEAD OPTIONS CONNECT POST PROPFIND PUT DELETE PROPPA$
Require group workgroup
</Limit>
AuthName "subversion"
</Location>
changes to
<Location "/svn/">
DAV Off
SVNParentPath Path/To/My/SVN
AuthType Basic
<Limit GET HEAD OPTIONS CONNECT POST PROPFIND PUT DELETE PROPPA$
Require group workgroup
</Limit>
AuthName "subversion"
</Location>
Has anyone else experienced this or know how to make my edits permanent?
-Scott

Put your stuff in a separate file and place an include directive in the apple managed file.

Similar Messages

I replaced my hard drive and I backed up my files on an external hard drive but when I reloaded my iweb to my imac none of my files were on it so I can't make changes to my Published web site have I lost my files what can I do

I replaced my hard drive and I backed up my files on an external hard drive but when I reloaded my iweb to my imac none of my files were on it so I can't make changes to my Published web site have I lost my files what can I do

By default iWeb keeps its data in (user)/Library/Application Support/iWeb in a file named Domain. Without this file you cannot proceed (other than by recreating the site from scratch using the published version as a reference) so you need to locate it on the original disk.
To confuse matters, Apple have hidden the user’s Library folder in Lion and Mountain Lion to casual viewers, in an attempt to stop new Mac users messing their machines up. To access it, in the Finder go to the ‘Go’ menu and hold down the Option (Alt) key; the Library folder will appear as a choice.

I was infected by a virus and this changed proxy config to 127.0.0.1:64727, i removed the virus, but every time i start firefox i find the proxy configuration made by the virus.is there any config file i can change ?

I was infected by a virus (i can't remember the virus name). Antivirus removed it, but i think it changed some config file on FF, 'cause every time i try to restart it , i find it configured to use proxy 127.0.0.1:64727. I change every time the config, i also tried to change the config on the about:config and set network.proxy.type 5 , no port and no network proxy (so it's all on default) . I changed the config on the gui, i removed the config from windows registry ( IE and chrome start normally, with no proxy), but every time i restart FF i find the proxy config there. How can i fix it ?

I had the same problem.
Solution
'''Clear Virus First'''
-clear virus using either anti-virus or manually going into task manager and figuring out which processes are bad.
-If the manual way, go through each process in task manager and right click to "open file location". Depending on where it is located and the name of the process, you can google the process name online to see if it is bad.
-Delete the bad process file and as added security, create a folder using the name of the process so the file can't be recreated later. (example: If I had a virus "3dcr.exe" in folder c:\user, then delete "3dcr.exe" and create a new folder c:\user\3dcr.exe\ )
'''Fix Proxy Settings'''
-If your browser points an proxy server and you can't change the settings because every restart of firefox returns the settings back (even after changing in about:config or prefs.js or options>advanced>network>settings). The answer is to uninstall firefox with all its user preferences and the reinstall it.
*I know it is a bit brute force, but it was the only method I found to work. Just be sure to save your bookmarks first.

Changes to be done in the code while converting appln to web start

Hi All,
I am developing one application using swing, Spring, Hibernate. It is working fine through eclipse. Now I want
this project to be launched via java web start. For that I have to make changes in the code for accessing
resources such as images, files. Also changes have to be made to access the system environment variables.
But there will not be 2 versions. I want something like
if applcaiton running through eclispe
execute this code for images and files
else if application is running though jabva web start i.e. by clciking on jsp
execute this code for images and files
Also spring-beans.xml has the system propery as environment.
<property name="location" value="classpath:application-${environment}.properties" />
but while running though eclipse i have to change it as
<property name="location" value="classpath:application-${jnlp.environment}.properties" />
Now can it be possible to have only one property value for location?
Please help me. If u know any URL which addresses this issues of give some what direction on this matter,
please provide me those also.
Thank and Regards
Deepali.

I think it's much better to make a JSP, Spring Hibernate version of your swing app.
You can even choose JSF as a view layer.

Can we change the title of "Java Web Start" window?

Hi while running our application into "Java Web Start" using jnlp configuration file, may I know how to change the title of Java Web Start Window.
At present it show the title like "Java Web Start" I want to customize, is it possible? , How?

As far as I know this is not possible. You can customize the splash window displayed with the jnlp how your told, but the title of the window cannot be changed.
Edited by: Phlipp_Meier on Oct 5, 2007 6:14 AM

Can we change the label of Java Web start at the time of downloading applic

can we change the label of Java Web start at the time of downloading application?
At the time of downloading application(jar files) java web start shows "Downloading Application" lable on it window , so can we change it so some other..

The 'splash' screen might be of interest to you.
Here is the quick description from the FAQ.
<http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/faq.html#206>
Section 3.5 of the JNLP Spec. has more details on using a splash screen for an application.
(But if you mean changing the very first screen seen when downloading an application the first time, the answer is 'no'.)
Late addendum..
By the way - now I review your question, I note you stress 'while jars are downloading'.
There is another strategy you might take. Mark most of the application jar's as 'lazy' download, get the main GUI on-screen quickly, then use the JNLP API's DownloadService to fetch the rest of the jars, after the application is running.
This has the advantage that, then we can have complete control of whatever is shown on the screen during the bulk of the downloads. We might show ..a 'splash screen', or a dialog with the application name on it, or a progress dialog, ..or any combination of the three.
Edited by: AndrewThompson64 on Oct 22, 2007 3:01 PM

Final Cut Server: Cannot connect to Java Web Start with a web browser

I get this exact error http://support.apple.com/kb/TS1610, but their steps do not fix it.
sudo cp /etc/apache2/sites/0000any_80.conf.default /etc/apache2/sites/0000any_80.conf
has me validate and then goes back to the prompt the other:
Xserve:~ admin$ sudo /Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/post-install.sh
Stopping Final Cut Server services ...
launchctl: Error unloading: com.apple.FinalCutServer.fcsvr_ldsd
launchctl: Error unloading: com.apple.FinalCutServer.fcsvr_stored
Starting postgresql ...
Initializing database ...
could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.8820"?
connection failed, retrying (1) ...
-- updating: pxtraitclass
-- updating: pxperm
-- updating: pxgroup
-- updating: pxschema
-- updating: pxentitylinktype
-- updating: pxenum
-- updating: pxenumentry
-- updating: pxmdfield
-- updating: pxtrait
-- updating: pxmdgroup
-- updating: pxmdgrouphasfield
-- updating: pxeventstatus
-- initializing config package: base
-- updating: enum
-- updating: enumentry
-- updating: mdfield
-- updating: mdgroup
-- updating: mdgrouphasfield
-- updating: mdmap
Settings plist already present, not overwriting.
Starting Final Cut Server services ...
Configuring webstart for OS X Server on default site ...
web:Modules:array_id:php5module:enabled = yes
web:Modules:array_id:userdirmodule:enabled = yes
web:Modules:array_id:apple_userdirmodule:enabled = yes
web:Sites:array_id:*:80_:IfModule:_array_id:mod_rewrite.c:RewriteCond:_arrayindex:0 = "%{REQUEST_METHOD} ^TRACE"
web:Sites:array_id:*:80_:IfModule:_array_id:modrewrite.c:RewriteEngine = yes
web:Sites:array_id:*:80_:IfModule:_array_id:mod_rewrite.c:RewriteRule:_arrayindex:0 = ".* - [F]"
web:Sites:array_id:*:80_:IfModule:_array_id:mod_rewrite.c:RewriteRule:_arrayindex:1 = "^/FinalCutServer$ /~fcsvr/Sites/webstart/index.php [NC,L]"
service: This command still works, but it is deprecated. Please use launchctl(8) instead.
service: This command still works, but it is deprecated. Please use launchctl(8) instead.
Xserve:~ admin$
Help? I should point out this is my first experience with OSXserver and I am not exactly an advanced user.
Message was edited by: otterholt

Hi, this dind't help.
I can resolve host name, so it looks like DNS works:
If I typed: <IP address> or localhost or localhostname.local or hostname I stiil get the default OS X web page with services, but no service is available not I can't connect to FCS web start page.
I didn't change DNS records - it is default as it was after installation of system and FCs.

New to Java Web Start technology - unable to start JWS

I am new to JWS, and started with sample programs given at JWS product page.
I compiled the files and created the .war file and copied that file into the DOCUMENTROOT of my Web server. Also I copied the .jnlp file into the same location. After that I created a .html file in the same location which provide a link to .jnlp file.
Now, when I launch the html file, and click on the link, JWS window should have been launched and the application should have been started. But, what I see is the contents of .jnlp file on the browser.
What might be the problem? Please let me know the solution...
I am using Apache Web Server on a Win 2000 system. Also I modified the mime.types file under web server to include the following line:
application/x-java-jnlp-file JNLP
Thanks,
Raghu

Hi All,
After some configuration changes, now I am able to start Java Web start. But as soon as web start gets started it tries to download JRE from Sun site(though I have JRE installed on my system and the PATH is set). I am getting the following message : requesting JRE 1.4.0_01 from http://java.sun.com/products/autodl/j2se.
My .jnlp file is as given below:
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="1.0" codebase="http://system-ip/webpad.war">
<information>
<title>WebPad 1.0</title>
<vendor>Sun Microsystems, Inc.</vendor>
</information>
<resources>
<property name="publish-url" value="$$context/publish"/>
<j2se version="1.4.0_01"/>
<jar href="webpad.jar" version="1.0"/>
<jar href="jlfgr.jar" version="1.0"/>
<extension name="Help System"
href="javahelp.jnlp">
<ext-download ext-part="javahelp" download="lazy" part="help"/>
</extension>
<jar href="holidays.jar" version="1.0" download="lazy" part="help"/>
</resources>
<application-desc main-class="WebPad"/>
</jnlp>
Please let me know, what should I do to rectify the above problem.
thanks,
Raghu

Jmf on web start

Hi friends,
Currently I am dealing with a project which includes distribution of JMF(java media framework) over the web. For this purpose, web start seems a nice approach.
Moreover, JMF requires some native libraries which should be deployed from web start. I had problems at this point and strongly need help. I could not achieve deploying these libraries from web start hence running JMF from web start.
I had no problem at running JMF from local JRE in standard java desktop applications. This means that required dlls can be successfully loaded and linked from standard applications but not from web start applications.
I have read lots of forums and web sites and did what is said (at least I think I did), but could not solve the problem. Most probably, I need to do some simple configurations but at this point I totally don�t know what to do. Below, I want to mention shortly what I did to deploy JMF over the web start and the exceptions and error I faced with. I will be very happy if you find something wrong in these steps and tell me what to do:
1. I jared all dlls related with the JMF : To do that, from Eclipse ee, I selected about 15 jmf dlls, right clicked them, chose �export� as jar, and obtained a jar from these dlls.
2. Then, I signed them using keytool and jarsigner tools of java to give the project unrestricted access for media processing.
3. Then, I added this jar to the webcontent folder of the project with other jars and files.
4. After that, I added following tag to the jnlp file of the project: <nativelib href="http://193.140.214.29:8080/jmfproject/jmf-native-all.jar"/>
5. I also added required System.loadLibrary() methods to my code in the order which gives no problem. (In the forums I read previously, these codes are required to load native dlls to the environment in which project will be run.)
Note: I deployed project on Apache Tomcat Server.
Below, I give my complete jnlp file;
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="1.0" codebase="http://193.140.214.29:8080/jmfproject" href="http://193.140.214.29:8080/jmfproject/jmfproject.jnlp">
<information>
<title>jmfproject</title>
<vendor>Techneon ltd.</vendor>
<icon href="http://193.140.214.29:8080/jmfproject/techneon.jpg" kind="default"/>
<icon href="http://193.140.214.29:8080/jmfproject/techneon.jpg" kind="splash"/>
</information>
<security>
<all-permissions/>
</security>
<resources OS = "Windows">
<j2se version="1.6.0_03" href="http://java.sun.com/products/autodl/j2se"/>
<jar href="http://193.140.214.29:8080/jmfproject/jmf.jar"/>
<nativelib href="http://193.140.214.29:8080/jmfproject/jmfnative.jar"/>
</resources>
<application-desc main-class="JmfprojectStarter"/>
</jnlp>
And below is the cronical exception I faced with:
java.lang.NullPointerException
at Jmfproject.<init>(Jmfproject.java:241)
at JmfprojectStarter.main(JmfprojectStarter.java:9)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.sun.javaws.Launcher.executeApplication(Unknown Source)
at com.sun.javaws.Launcher.executeMainClass(Unknown Source)
at com.sun.javaws.Launcher.doLaunchApp(Unknown Source)
at com.sun.javaws.Launcher.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)

Hi Andrew,
Thank you very much for your attention,
My simple project contains 2 classes: JmfprojectStarter, which contains only main method and Jmfproject which is a swing GUI
Below is JmfprojectStarter:
+public class JmfprojectStarter {+
+     /**+
+     * @param args+
+     */+
+     public static void main(String[] args) {+
+          +
+          new Jmfproject();+
+     }+
+}+
And below is the System.loadlibrary part of the Jmfproject class:
+/*+
* Java(TM) SE 6 version.
some import statements
+@SuppressWarnings("serial")+
+public class Jmfproject extends JFrame implements ControllerListener {+
+     some gui component declarations+
+     +
+public Jmfproject() {+
+     +
+     System.loadLibrary("jmacm");+
+     System.loadLibrary("jmdaudc");+
+     System.loadLibrary("jmmpegv");+
+     System.loadLibrary("jmutil");+
+     System.loadLibrary("jmvcm");+
+     System.loadLibrary("jmvfw");+
+     System.loadLibrary("jmmpa");+
+     System.loadLibrary("jmmci");+
+     System.loadLibrary("jmdaud");+
+     System.loadLibrary("jmcvid");+
+     System.loadLibrary("jmam");+
+     System.loadLibrary("jmjpeg");+
+     System.loadLibrary("jmh263enc");+
+     System.loadLibrary("jmh261");+
+     System.loadLibrary("jmgdi");+
+     System.loadLibrary("jmg723");+
+     System.loadLibrary("jmddraw");+
+     System.loadLibrary("jmvh263");+
+     System.loadLibrary("jmfjawt");+
+     System.loadLibrary("jmgsm");+
+.+
+.+
+.+
some gui component initiliazations
+.+
+.+
+.+
below is code block where I got the exception(statement in bold throws the exception)
+try {+
+          URL mediaURL = getClass().getResource("media/ungreedy.wav");+
+          player = Manager.createPlayer(mediaURL);+
+          player.addControllerListener(this);+
+     }catch (Exception e) {e.printStackTrace();statusField.setText("player error");}+
player.start();+
As you see, System.loadlibrary methods are not called from main method(although from the same thread). Moreover, I guess there is no problem in the order of method calls since I changed the order untill I do not get "dependency" errors which are thrown when one dll depends on some other one. But in some way, these dlls can not be used by web start according to the part of exception thrown :
at sun.reflect.*NativeMethodAccessorImpl.invoke0*(Native Method)
at sun.reflect.*NativeMethodAccessorImpl.invoke*(Unknown Source)
at sun.reflect.*DelegatingMethodAccessorImpl.invoke*(Unknown Source)
I have no idea at this point:(
Thank you very much again
Edited by: alperyesilyurt on Jan 9, 2008 5:35 AM

Confusion in Weblogic ReportsServer config without doing change the config?

confusion in Weblogic ReportsServer config without doing change the config ?
my env
windows 2008 64 Bit
WLS 10.3.5 64 Bit
pfrd Forms/Reports 11.1.1.4 64 Bit
after Install all and config my Forms and Reports
the default reports server i found with
http://wlog:8090/reports/rwservlet/getserverinfo
had a name
RptSvr_myserverhost_Formsreportsinstan,
I did run my Forms and reports well with RP2RRO.RP2RRO_RUN_PRODUCT
now some time later I found, that the reportsServer name is changed to
rep_wls_reports_myserverhost_formsreportsinstance_1
and I don't know, why ??
I do start the WLS_REPORT by using the oracle-scripts using startManagedWebLogic.cmd
In the WLS Admin Console there I can see the WLS_REPORTS Server is well started
and after change the ReportServername in my forms to the 'new' servername
I can start my forms with Reports again
In the Enterprise Manager 11g under the reports-tree there are three entries:
ReportsTools
reports(11.1.1.2.0)(WLS_REPORTS)
RptSvr_myserverhost_Formsreportsinstan ( the 'old' reportserver, that isn't started and not available )
on Server in
C:\Oracle\Middleware\asinst_1\reports\server
there are two entries:
rep_wls_reports_wlog_formsreportsinstance_1.dat
and
RptSvr_myserverhost_Formsreportsinstan.dat
and in
C:\Oracle\Middleware\asinst_1\reports\
is in the reports_install.properties file :
SERVER_NAME=rep_wls_reports_wlog_formsreportsinstance_1
ORACLE_INSTANCE_NAME=Formsreportsinstance_1
INPROCESS_SERVER_NAME=rep_wls_reports_wlog_formsreportsinstance_1
what I have done, that can be the reason for now have two entries for reportsserver ?
In the last days i worked to create the windowsservices
to start the WLS_AdminServer and to start the WLS_FORMS / WLS_REPORTS
ManagedServer
and I changed the IP - Adress of the WLS - ServerHost, ( and back again )
but didn't create a new ReportServer ore anything !
what can I do, to fix this confusion ?

Hello,
In 11g , there are 2 Reports Servers created by default :
- rep_wls_reports_myserverhost_formsreportsinstance_1
The "in-process" Reports Server . WLS_REPORTS must be started and you can start this "in-process" Reports Server by just calling an URL like http://server:port/reports/rwservlet/getserverinfo or by using the menu in the EM web site
- RptSvr_myserverhost_Formsreportsinstan,
The Standalone Reports Server . You can start it using opmnctl command or using the menu in the EM web site
Regards

Java web start unable to auto download java 1.6.0_14

Hi,
My application runs on java 1.6.0_14 and i want clients to use either 1.6.0_14 or higher while running the application. In the JNLP file i have mentioned j2se version as 1.6.0_14+
If the client machine has a java version lesser than 1.6.0_14, Java web start is not automatically downloading the given version from sun auto download site.
Isn' t this version supported by Sun for auto download? If yes, how to get around this problem?

Thanks..
We do have a web page from which we access the jnlp and that web page has javascript to force download of a specific version of JRE. Once it downloads the application on client machine, it creates an icon on the desktop.
If the application and jnlp is changed on the server, we want clients to go through the icon on desktop and still get the version of jre mentioned in the updated jnlp rather than having them go through the web page again do download the new JRE required...

Unable to launch java web start

We have already devloped an application based on java web start. Most of the client machines, we try to install java web start and run the developed app, it works fine. For one of the clients machine, we have an issue with java web start itself, it does not startup and bring up the application manager. When you start java web start, it shows up the splash screen 'java web start 1.0.1' after some time, it vanishes and does not bring up the application manager. I have installed java web start 1.0.1_01 (build 04) installed on Windows 2000 Professional, by default that has installed JRE 1.3.1_04 also.
We verified the system, all the files being existing under c:\program files\java web start dir. And the JRE is also installed fine.
Couple of times we uninstalled, rebooted and installed.
Infact, we have even verified the file types for html, htm, which was set to msoffice, and we have changed to internet explorer. For jnlp file type it was already set to javaws.exe.
Can you please let me know what could be the problem.
Regards,
Nagarjuna Rao Chakka

There's nothing to stop you installing 1.4 or even 1.4.2, it's the jnlp file that specifies which runtime version gets used to run your application - web start can be used to happily switch runtimes like this. You'll just need to have 1.4 and 1.3 installed on each machine. It's a good idea to upgrade the web start client as the old 1.0 version doesn't work at all well with Windows XP, it's structure of storing all the files in c:\program files works against the security restrictions built into XP.
Incidentally the config file you were looking for in under c:\program files\javaws\javaws.cfg, but this is different in later versions.
Your problem is most likely being caused by web start not being able to find the Java runtime version it was installed with, the client may well have installed a newer (or older) version of 1.3 which has broken the configuration.. another reason to upgrade is the old versions are very fragile in this respect; 1.4.2 can find installed runtimes far more dynamically. Fixing the config file above should get things working again, otherwise delete the .javaws directory in the user profile and re-start web start.
1.4.2 is the best at finding runtimes, but is marred by problems with the integration dialogs, locale always reported as en_US and some strange new behaviour with classloaders and malfunctioning auto installers.. jws 1.2 that comes with jre 1.4.1_x is far more reliable.
- Richard

What's the difference between a web site and a web application?

I'm stumped trying to come up to a difference between a web site and a web application for myself. As I see it, a web site points to a specific page and a web application is more of some sort of 'portal' to content and information.
But where I'm stuck is that a web application is still viewed through a browser (is it not?) and a web site can still view content dynamically, making the line between web site and application prety gray.
For instance, does a web site using ASP.NET or AJAX (I assume ASP.NET is AJAX's proprietary sibling, if not, ignore ASP.NET AND concentrate on the AJAX), becomes a web application because it can retrieve data dynamically and asynchronously or would a website
using PHP and a CMS be more of a web application because it forms the pages on request, based on the request of the client and its content in its databse?
Or maybe I'm totally wrong here - what differenciates between a web application and a website?
http://support.peopleperhour.com/entries/68630566--C-mon-lets-Watch-The-Other-Woman-2014-full-movie-online-free
https://glossicom.zendesk.com/entries/68643806--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
https://cloudhance.zendesk.com/entries/68115098--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
This is totally personal and subjective, but I'd say that a website is defined by its content, while a webapplication is
defined by its interaction with the user. That is, a website can plausibly consist of a static content repository that's dealt out to all visitors, while a web application depends on interaction and requires programmatic user input and data processing.
For example, a news site would be a "website", but a spreadsheet or a collaborative calendar would be web "applications". The news site shows essentially the same information to all visitors, while the calendar processes individual data.
Practically, most websites with quickly changing content will also rely on a sophisticated programmatic (and/or database) backend, but at least in principle they're only defined by their output. The web application on the other hand is essentially a program that
runs remotely, and it depends fundamentally on a processing and a data storage backend.
http://support.peopleperhour.com/entries/68125597--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
https://cloudhance.zendesk.com/entries/67541393--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
http://support.peopleperhour.com/entries/68168787--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
https://glossicom.zendesk.com/entries/68161538--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
There is no real "difference". Web site is a more anachronistic term that exists from the early days of
the internet where the notion of a dynamic application that can respond to user input was much more limited and much less common. Commercial websites started out largely as interactive brochures (with the notable exception of hotel/airline reservation sites).
Over time their functionality (and the supporting technologies) became more and more responsive and the line between an application that you install on your computer and one that exists in the cloud became more and more blurred.
If you're just looking to express yourself clearly when speaking about what you're building, I would continue to describe something that is an interactive brochure or business card as a "web site" and something that actually *does something that feels
more like an application as a web app.
The most basic distinction would be if a website has a supporting database that stores user data and modifies what the user sees based on some user specified criteria, then it's probably an app of some sort (although I would be reluctant to describe Amazon.com
as a web app, even though it has a lot of very user-specific functionality). If, on the other hand, it is mostly static .html files that link to one another, I would call that a web site.
Most often, these days, a web app will have a large portion of its functionality written in something that runs on the client (doing much of the processing in either javascript or actionscript, depending on how its implemented) and reaches back through some
http process to the server for supporting data. The user doesn't move from page to page as much and experiences whatever they're going to experience on a single "page" that creates the app experience for them.

...can i make as many iweb websites as i want? ...and as many blogs as i want? ...i have never made one before....
....although, i do have my own small business and i do have a website that i paid a guy to make and also host....(which is a waste of $$$$ in my opinion as i think i can do a better job making one myself through iweb) ....
...anyways, i know it is splitting hairs but what exactly is the diff b/w a blog and a website ....i am under the impression that a blog is just a personal newsletter sort of thing,...?

JVM - Microsoft JScript.dll Memory Leak when using Java Web Start

I have posted before a topic related to this matter, although now I have a lot more information about what is going on (although still no fix for it). This is the link to the earlier post, containing JVM HOTSPOT EXCEPTION_ACCESS_VIOLATION
http://forum.java.sun.com/thread.jspa?threadID=5116970&messageID=9402346#9402346
The issue is that after deploying on Windows XP a multi threaded, memory consuming (40 Mb) Java Swing application using Java Web Start, and the standard web page (IE6) reference to the jnlp file to launch the installation from Tomcat, each time this application gets executed by double clicking on the desktop icon (with no IE6 interaction at all), calls start being made between jvm.dll (sun) and jscript.dll (Microsoft IE), these interactions never release the memory they consume, so after a period of using the application it crashes unavoidably. If I execute exactly the same application launching it from command line (no Web Start nor IE6 browser involved), the application works nicely all the time, no problem at all.
My question is: does anyone know why these calls to jscript.dll are even being made during web start application execution? As said, it's a desktop Swing app, it does not need the browser at all, and jscript.dll is a IE dll. Anyone can advice on how these interactions can be eliminated?
I've worked with Microsoft support for two weeks on this issue and all they have said is that it is a Sun problem and they can not help further.
Thanks
Jes�s

Microsoft suggested (among others) two test.
1- Install IE7 and run the application
2-Install Firefox and run the application
Results were:
For 1: The application does not crash, apparently IE7 has a newer version of Jscript.dll that, in Microsoft words, handles better 'bad software', refering to 'bad software' to the java virtual machine I guess. Looking at the performance manager you can see memory goes down as with IE6, but at some point memory is released and the app. does not crash. Anyway is still is uncertain to me why Jscript.dll is getting involved at all. Although this solves the problem is not a viable solution for us, because I work in a corporation where changes such as upgrading the IE version on a large number of desktop can not be justified just because one app. is crashing, and it would take a long validation time anyway before the upgrade can proceed.
For 2: I did install Firefox in a machine and the application still crashed, but it is true I did not uninstall IE6, so the conflictive Jscript.dll was still sitting at system32. Quite possibly the crash would not happen if that dll wasn't there at all.
Thanks
Jes�s

OpenGL not starting from java using java web start

Dear All,
I am a beginner in java2d, please excuse if what I am asking is not your standards. My problem is that I am using a swing application that is delivered to a client machine through the webstart. It is a medical Image viewer(usually DICOM images of size 10~15 MB) . I am using windows XP in my client machines. My graphics card is 'Intel(R) 82865G Graphics controller' and installed with the latesr driver from the intel web site. My current problems are:
1. I tried starting the opengl through the command line using the option java -Dsun.java2d.opengl=True MyApp. My application started however the verbose says opengl could not be started. The message is as follows:
Could not enable OpenGL pipeline for default config on screen 0
2. How can I start open gl when my application is run by java web start? How can I know that open gl has started? I tried giving System.setProperty("sun.java2d.opengl","True") in the main function of the program. I couldnt see any message regarding the opengl in the web start console.
Any help would be greatly appreciated,
Thanks in advance,
zeus

Im not sure but a lot of times corruption happens and hence its better you redo your scheduling.
Regards,
Den

Apache Changes Site Config on Web Start

Similar Messages

Maybe you are looking for