Apache Derby database not working

I am running a Windows 2003 server with Coldfusion 8. I was attempting to update the Apache Derby database to the latest version. I copied the following files to the "\Coldfusion8\lib\" directory and replaced the existing files:
derby.jar
derbyclient.jar
derbynet.jar
derbyTesting.jar
derbytools.jar
After replacing these files, I haven't been able to get my Apache Derby embedded databases working. I've downloaded all of the versions of Derby from the Apache website and individually replaced the files in the "\Coldfusion8\lib\" folder. I shut down CF, replaced the 5 files, and restarted the server; all without any luck.
Any ideas on how to restore Apache Derby functionality to my server would be greatly appreciated.

how to restore Apache Derby functionality
Restore the original files you replaced!
If you want to use version of Derby other than the one CF ships with, install it separately.
Adam

Similar Messages

Database not working

Hello,
I am having a 10g release 1 database on my HP UX server.
The problem with this database is it's listener is working emagent is working fine.
But I am trying to login with system password then it shows me error like
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directory

Moderator Comment:
The O.P. had already asked this question in the Solaris 10 forum.
Database not working
I had already moved it to the Database forum.
Then after the comments in this thread, they've re-posted it yet again into the Database forum.
Not able to connect / as sysdba
and spammed it to the Oracle Linux forum:
Not able to connect / as sysdba
Handle: user8856758
Status Level: Newbie
Registered: Jun 22, 2011
Total Posts: 6
Total Questions: 4 (3 unresolved)@ user8856758 ,
You've been here long enough to know better, so we can only assume you are just being inconsiderate or rude with all your crossposts.
They're all locked.

5.0 database not working in lookout 6.6

5.0 database not working in lookout 6.0. I converted the database using the lks file and then saved it. that all worked fine but my modbus stats are in 100% error connected with direct serial! any known fixes? help please!

Is this MODBUS or the database?
To use the 5.0 Databaes you need to use the NI MAX utility to convert a citadel 4 to Citadel 5 database.
Forshock - Consult.Develop.Solve.

Apache Plugin is not working with Cluster Entry in httpd.conf

Hi Guys,
We have a very particular issue that is happening here in our production environments. Before explaining the issue to you, I will just give a brief of our architecture.
We are using Weblogic Portal Platform SP4.
Our current Production Domain Consists of 1 Admin Server and 2 Managed Servers. The managed servers are in a cluster.
We have two Linux boxes on which the weblogic servers are running. These two machines have IPs: x.x.x.58 and x.x.x.59. Now, the Admin Server and managed Server 1 are started on the machine x.x.x.58 and managed server 2 is started on the machine x.x.x.59. Both the managedServers listen on port 8007.
This entire setup mentioned in the above paragraph is at a location A (lets say).
Now, the requests are proxied to the managed server cluster using BEA's Apache plugin residing on Apache. Apache is running on two Linux boxes that are present at a location B.
Location B is connected to Location A by a dedicated WAN Link.
Now, before the two Apache servers there is a physical Load Balancer that balances the requests between the two Apache boxes.
This means that whenever there is a request from the Internet to the weblogic cluster, the load balancer first sends it to either of the Apache servers and then the BEA Apache plugin on that Apache forwards the request via the 2 mbps WAN link to the weblogic cluster.
Now following is the description of the issue we are facing. We donot know whether the issue is with the plugin or with weblogic server.
In order that the plugin load balances the requests between the servers in the cluster and for failover, the following entry was put in httpd.conf on both the Apache Servers.
WebLogicCluster y.y.y.11:8007,y.y.y.13:8007
Note: Because of the WAN link there is natting used. This implies y.y.y.11 is natted to x.x.x.58 and y.y.y.13 is natted to x.x.x.59.
Here in lies the issue. When we use this plugin entry the following issue occurs.
1.     First we go to the home page and login.
2.     The user is then redirected to a Portal Desktop fitting those credentials.
3.     Now on this Portal Desktop, invariably whenever we click any of the desktop's links, an HTTP 403 is thrown. This error is thrown because on the desktop there are entitlements so that it cannot be accessed without a user logging in with credentials. But this error indicates that the server is losing the session and entitlement details.
Why does this happen?
As a result, we cannot use that plugin entry. The current entry we have is
WebLogicHost y.y.y.11
WebLogicPort 8007
As you can see, here we are only redirecting to one managed server. This entry is not what we want, obviously because if that server fails, the plugin wont know which other server to pass the request on to. Also in this case there is no load balancing.
Our issues our,
1. How to resolve this plugin entry issue. How can we use the cluster entry without encountering this HTTP 403 Error?
3. Consider the following sequence of steps.
- Request for the home page is served by Apache Server 1
- User logins in, the login request is sent by the Load Balancer to Apache Server 1 and plugin on Apache Server 1 sends it to the cluster via WAN l ink. Then the internal mechanism works with creating the session id and primary server and secondary server and logs the user in and sends the response via Apache Server 1.
- Now, the user clicks a link on the desktop. The request now goes to the load balancer and it sends it to Apache Server 2.
The question is now does the plugin on Apache server 2 correctly understand and send the request to the primary server of that session.
Pls help me as to giving me some direction in resolving this issue

From your Xorg.0.log:
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.49.7
(II) fglrx(0): Date: May 12 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
You have to quit X, then rmmod and modprobe the kernel module - you're still using the old one. (a reboot would technically fix it too)
# rmmod fglrx
# modprobe fglrx
# dmesg | tail
The dmesg output should say you've successfully loaded the 8.501 driver.

Apach1 .1.3.22+ mod_ssl /Weblogic 5.1 Browser to Apache SSL does not work

We are using Weblogic 5.1 and apache 1.3.22+mod_ssl. HTTPS requests to the apache
server for jsp do not work. However if
a HTTP request for the same jsp is made, it works.
SSL requests only work if the ServerName directive for HTTP
server and the 443 Virtual Server are commented out in httpd.conf. Is this right?

Hi.
Firstly, this is not a supported configuration. The latest version of apache we
certify is 1.3.19. See the following link for supported platforms:
http://edocs.bea.com/wls/platforms/index.html#apach.
Without seeing your httpd.conf file this should work. You probably already know this,
but with WLS 5.1 https between the server and the plugin is not supported, so apache
needs to translate all http/https requests to http for WLS.
I recommend you try posting this question to the plugin newsgroup -
weblogic.developer.interest.plugin.
Thanks,
Michael
shakeel rao wrote:
We are using Weblogic 5.1 and apache 1.3.22+mod_ssl. HTTPS requests to the apache
server for jsp do not work. However if
a HTTP request for the same jsp is made, it works.
SSL requests only work if the ServerName directive for HTTP
server and the 443 Virtual Server are commented out in httpd.conf. Is this right?--
Michael Young
Developer Relations Engineer
BEA Support

Database not working when network is offline

I have installed Oracle 11gExpressEdition in my office laptop. It works fine if my laptop is connected with my office network and its not working outside office network. I am trying for long time to resolve this issue but couldn't able to find success.
I tried with changing Pcname in "C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN\listener.ora" AND "tnsnames.ora" TO "localhost" and "127.0.0.1".
Installed Windown loopback adapter and reinstalled application. But nothing works.
Can you please help me
Thanks in Advance..

Thanks for your replay,
Add to my question, database instance is running and my application can able to connect to database only issue is the link using for management portal
http://127.0.0.1:8080/apex/f?p=4950
is not working showing "Cannot display the webpage".
Here is my listner.ora
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = XE)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
And tnsnames.ora
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)

Standby Database not working

Hi I have created one standby DB for Oracle 10.1.0.2.0 on same server for the primary Db.As per Oracle docs I have configured everything but when I do logswitch on primary DB and then check the standby DB as...
SELECT SEQUENCE#, FIRST_TIME, NEXT_TIME
FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#;
it shows no records, that means it is not working.
I have created standby redolog file in the primary DB , as I am using LGWR ASYN mode of redo transform but when I do..
SQL> SELECT GROUP#,THREAD#,SEQUENCE#,ARCHIVED,STATUS FROM V$STANDBY_LOG;
GROUP# THREAD# SEQUENCE# ARC STATUS
4 2 0 YES UNASSIGNED
it show the status unaccessed.
please help me to sort out this problem....
Regards

Hi
Thanks to all. Yes I checked the alert logs for both DB, there was some problems due to DB_FILE_NAME_CONVERT ini parameter setting. after I fixed that, I am getting this error in lgwr.trc file
Dump file c:\oracle\product\10.1.0\admin\orcl\bdump\orcl_lgwr_1368.trc
Tue Mar 11 15:39:17 2008
ORACLE V10.1.0.2.0 - Production vsnsta=0
vsnsql=13 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows XP Version V5.1 Service Pack 2
CPU : 1 - type 586
Process Affinity: 0x00000000
Memory (A/P) : PH:14M/255M, PG:123M/909M, VA:1749M/2047M
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 5
Windows thread id: 1368, image: ORACLE.EXE (LGWR)
*** SERVICE NAME:() 2008-03-11 15:39:17.008
*** SESSION ID:(167.1) 2008-03-11 15:39:17.008
LGWR: Archivelog for thread 1 sequence 42 will NOT be compressed
*** 2008-03-11 15:39:17.227 47100 kcrr.c
Making upidhs request to NetServer -1 (ocis 0x05FCE6E0)
ERROR: kcrrnsupidhs nsidx=-1
*** 2008-03-11 15:39:17.258 45203 kcrr.c
Initializing NetServer for dest=stby
Initializing PGA storage for Netserver communication
Allocating a brand new NetServer
Allocated NetServer 0
NetServer 0 has been started.
Subscribing to KSR Channel 0
success!
Indicating recv buffer for KSR Channel 0
success
Waiting for Netserver 0 to initialize itself
*** 2008-03-11 15:39:20.415 45488 kcrr.c
Netserver 0 has been initialized
LGWR performing a channel reset to ignore previous responses
LGWR connecting as publisher to KSR Channel 0
LGWR-NS 0 initialized for destination=stby
*** 2008-03-11 15:39:20.415 45982 kcrr.c
Making upiahm request to NetServer 0
Waiting for NetServer 0 to respond to upiahm
*** 2008-03-11 15:39:24.274 47100 kcrr.c
Making upidhs request to NetServer 0 (ocis 0x05FCE6E0)
NetServer pid:2916
*** 2008-03-11 15:39:24.274 47331 kcrr.c
upidhs done status 1031
*** 2008-03-11 15:39:24.274 46176 kcrr.c
upiahm connect done status is 1031
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'stby'
*** 2008-03-11 15:39:24.274 47100 kcrr.c
Making upidhs request to NetServer -1 (ocis 0x05FCE6E0)
ERROR: kcrrnsupidhs nsidx=-1
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'stby'
ORA-01031: insufficient privileges
*** 2008-03-11 15:39:24.336 52124 kcrr.c
LGWR: Error 1031 creating archivelog file 'stby'
*** 2008-03-11 15:39:24.383 50571 kcrr.c
kcrrfail: dest:2 err:1031 force:0 blast:1
*** 2008-03-11 15:39:37.680
Old character set id was US7ASCII
*** 2008-03-11 15:39:38.055
New character set id is WE8MSWIN1252
now how to give privilege to the service 'stby'.
please give me some guidance.
regards

Providing administrator(s) full mailbox access to all mailboxes (database) not working

I'm setting up a new Exchange 2013 org. Everything is pretty fresh, only a few mailboxes have been added for testing.
I've added this permission, to provide full access to all the mailboxes in the database:
Get-MailboxDatabase -identity “Mailbox Database” | Add-ADPermission -user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As
I've verified the permission in ADSI Edit.
I have verified the permission in the recipient's mailbox delegation properties.
However, while logged into OWA using the admin account, if I try to open another user's mailbox from OWA, I just get a sad face that says "Something went wrong :( " .
Any ideas? I've tried resetting the owa virtual directory...reset IIS, rebooted several times, no luck.
Thanks

Hi
Is that ok when you set to single mailbox?
If ok, please try
Get-Mailbox -database “Mailbox Database” | Add-ADPermission -user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As
Cheers
Zi Feng
TechNet Community Support
Please see the original post, I've already tried "Get-MailboxDatabase -identity “Mailbox Database” | Add-ADPermission
-user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As"
If I add the permission individually through ECP, it works just fine. What I'm trying to accomplish is full mailbox access to all mailboxes in the database now and in the future
(something that works just fine in Exchange 2010,) however in 2013 it is not working. I tried doing it via a security group instead, same result.

Multiple Image Upload with save to database not working in IE anymore

Since updating IE to SP3 ADDT Multiple Image Upload with save to database does not work anymore in IE. It will show a regular file upload field, an does not allow selection of multiple files. It does work in Firefox, but not all my clients use firefox.
PSE Advice.

I would consider buying some pluggins from dmxzone.com. They
may cost a
bit upfront but in the long run, you've probably be saving a
lot of
headaches.
http://www.dmxzone.com/
If time's an issue, with these plugins, you could probably
be up and
running in a half hour. George has some really nice pluggins
for
Dreamweaver and well worth the money.
Peter Raun wrote:
>
I am going crazy here
> I will see if i can explain my problem here. . .
> I am trying to use the multiple image upload with save
to database function in
> the developer toolbox, and it work just fine, it lets me
select where to store
> the filename in database and where i want to save the
actual image on the
> server. It is wery easy to use if you just want these
functions.
> But i would also like to give every image a gallery id
in the database, so i
> can sort them out afterwards, its not whery smart to
upload a lot of images to
> a folder, and in the database you just have an image id
and an filename, i cant
> sort them into galleries with these to collums. . . . So
i guess i have to do
> something with the "additional fields" when i am
creating the server behavior
> but i cant figure out what to do?? i would have liked if
i could have made an
> list/menu with all of the availible galleries, and chose
the one that i whould
> add images too and then that gallery id whould be added
to those images in the
> database.
> I have also tried to pass on an url parameter and then
use that as a default
> value in the "additionel field" section but without any
luck at all. . . I hope
> someone here has an idea, that could help me out. . .
> It is sooooo easy to do this, when you are uploading ONE
image at a time, i
> cant figure out why it has to be sooooo hard when using
"multiple image
> upload"
>

DB13 Check database not working

Hi All,
Check DB and update stats from DB13 does not work. It comes back with the following error
Can't exec external program (No such file or directory)
Checked from OS level and found that brconnect -u / -c -f check works only from exe directory. If i execute the
command from any other directory it comes back with an error saying command not found
Upon further investigation found that this is an issue with env variable PATH
The current value of PATH in env variable of sidadm is
PATH=/oracle/SID/102_64/bin:/opt/IBMJava2-amd64-142/bin:.:/export/home/sidadm:/usr/sap/SID/DVEBMGS01/exe:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin
I want to change the value from usr/sap/SID/DVEBMGS01/exe to /usr/sap/SID/SYS/exe/run
I checked all the csh and .sh profiles for sidadm user but i did not find any PATH variable,
I can see DIR_LIBRARY and LD_LIBRARY_PATH but i cant see PATH variable
Checked the shell and it is /bin/csh
checked .bash_profile and all i can see is this
.bash_profile
Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
Has any one faced this issue earlier??
Meanwhile i have found a temporary fix for timebeing i.e i copied all the br* executables from /sapmnt/SID/exe to
/usr/sap/SID/DVEBMGS01/exe and after doing that DB13 - DBcheck and Update optimizer works fine.
Regards,
Ershad Ahmed

Hi Sunil and Eric
Thanks for the reply
I checked all the profiles but no luck. I cant find the parameter.
As i mentioned in my earlier post i have found a temporary fix by copying the br executables from /sapmnt/SID/exe to
/usr/sap/SID/DVEBMGS01/exe and ran saproot.sh and that resolved the issue.
If i can change my PATH variable to point to /usr/sap/SID/SYS/exe/run that would be a permanent fix
Regards,
Ershad Ahmed

Cfmail querying database not working

The code below is not working and I am not getting any
errors. Any suggestions.
<cfparam name="notifyDate" default="#DateFormat(Now(),
"short")#">
<CFQUERY name="getNotifications" datasource="AEDWEB">
SELECT u.strEmail,
u.strFirstName,
u.strLastName,
cc.strCCNoteEmailBody
FROM umsUsers u,
ctsConferenceCalls cc
WHERE cc.dtsCCNotificationDate = '#notifyDate#'
AND u.intCCNotify = 1
AND u.intMemberstatus = 1
</CFQUERY>
<CFOUTPUT query="getNotifications">
<CFMAIL TO="#strEmail#" FROM="[email protected]"
SUBJECT="Conference Call Reminder" SERVER="mail.ccicom.com"
port="25">
#strCCNoteEmailBody#
</CFMAIL>
</CFOUTPUT>

I just can a query with the WHERE, AND and I get data return.
I also modified the code by taking the cfoutput statement out. I
still get no mail. I also check in CF admin and the mail server is
running. Any other sugguestions please.
<cfparam name="notifyDate" default="#DateFormat(Now(),
"short")#">
<CFQUERY name="getNotifications" datasource="AEDWEB">
SELECT u.strEmail,
u.strFirstName,
u.strLastName,
cc.strCCNoteEmailBody
FROM umsUsers u,
ctsConferenceCalls cc
WHERE cc.dtsCCNotificationDate = '#notifyDate#'
AND u.intCCNotify = 1
AND u.intMemberstatus = 1
</CFQUERY>
<CFMAIL TO="#strEmail#" FROM="[email protected]"
SUBJECT="Conference Call Reminder" SERVER="mail.ccicom.com"
port="25">
#strCCNoteEmailBody#
</CFMAIL>

Apache web server not working...PLEASE HELP!!

I'm trying to get apache working on my Mac so I can host a website that will access a local MySQL database. I've researched this for a while. When I run the command:
#sudo /usr/sbin/apachectl -t
I get the following output:
httpd: Syntax error on line 75 of /private/etc/apache2/httpd.conf: Cannot load /usr/libexec/apache2/mod_deflate.so into server: dlopen(/usr/libexec/apache2/mod_deflate.so, 10): Library not loaded: /usr/lib/libz.1.dylib\n Referenced from: /usr/libexec/apache2/mod_deflate.so\n Reason: no suitable image found. Did find:\n\t/usr/lib/libz.1.dylib: no matching architecture in universal wrapper\n\t/usr/lib/libz.1.dylib: no matching architecture in universal wrapper\n\t/usr/lib/libz.1.dylib: no matching architecture in universal wrapper
How do I fix this issue? I would really like to get this running without having to resort to a virtual Linux box or using XAMMP if possible. Thanks for any help you can provide!
Mike

I get the following when I run that:
Usage: /usr/sbin/httpd [-D name] [-d directory] [-f file]
[-C "directive"] [-c "directive"]
[-k start|restart|graceful|graceful-stop|stop]
[-v] [-V] [-h] [-l] [-L] [-t] [-S]
Options:
-D name : define a name for use in <IfDefine name> directives
-d directory : specify an alternate initial ServerRoot
-f file : specify an alternate ServerConfigFile
-C "directive" : process directive before reading config files
-c "directive" : process directive after reading config files
-e level : show startup errors of level (see LogLevel)
-E file : log startup errors to file
-v : show version number
-V : show compile settings
-h : list available command line options (this page)
-l : list compiled in modules
-L : list available configuration directives
-t -D DUMP_VHOSTS : show parsed settings (currently only vhost settings)
-S : a synonym for -t -D DUMP_VHOSTS
-t -D DUMP_MODULES : show all loaded modules
-M : a synonym for -t -D DUMP_MODULES
-t : run syntax check for config files
So it doesn't like the command. If I run "#sudo /usr/sbin/apachectl -t", I get the error listed in my initial posting.
Mike

Verify Database not working!

Hello everyone,
I have a requirement for a database to be verified everytime the report is run, because of the dynamic nature of the data behind the report. However, the ReportClientDocument.verifyDatabase() is not behaving as I think it should. I assume it should behave the same as using the 'Verfy Database' comand within CR2008.
NOTE: The report works PERFECTLY without the verifyDatabase() command. But because of the dynamic nature of the data you have to keep using 'Verify database' via the CR2008 designer! This is not sustainable.
Here is my JSP, I will post the error separately for readability:
//SOME IMPORT DONE HERE
CrystalReportViewer crystalReportViewer;
ReportClientDocument reportClientDocument;
Object reportSource;
ParameterFieldController parameterFieldController;
String reportType = request.getParameter("reporttype");
if (reportType == null) {
    reportSource = session.getAttribute("reportSource");
else {
   String reportPath = request.getParameter("report");
   String DB_USER_NAME = new String(Base64.base64ToByteArray(request.getParameter("dbusername")));
   String DB_PASSWORD = new String(Base64.base64ToByteArray(request.getParameter("dbpassword")));
   reportClientDocument = new ReportClientDocument();
   reportClientDocument.open(reportPath, OpenReportOptions._openAsReadOnly);
   reportClientDocument.getDatabaseController().logon(DB_USER_NAME, DB_PASSWORD);
   IStrings subreportNames = reportClientDocument.getSubreportController().getSubreportNames();
for (int i = 0; i < subreportNames.size(); i++) {
    ISubreportClientDocument subreportClientDoc = reportClientDocument.getSubreportController().getSubreport(subreportNames.getString(i));
    subreportClientDoc.getDatabaseController().logon(DB_USER_NAME, DB_PASSWORD);
    reportClientDocument.verifyDatabase();
// SOME PARAMETERS SET HERE
reportSource = reportClientDocument.getReportSource();
reportClientDocument.close();
Does anyone have any examples of how to use the verifyDatabase, or can you see where I am going wrong?
Best Regards
Nick Hirst

The error reads:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
     com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(Unknown Source)
     com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
     com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(Unknown Source)
     com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(Unknown Source)
     com.crystaldecisions.reports.common.ThreadGuard.syncExecute(Unknown Source)
     com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(Unknown Source)
     com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(Unknown Source)
     com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
     com.businessobjects.sdk.erom.jrc.a.a(Unknown Source)
     com.businessobjects.sdk.erom.jrc.a.execute(Unknown Source)
     com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(Unknown Source)
     com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(Unknown Source)
     com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(Unknown Source)
     com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(Unknown Source)
     com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.a(Unknown Source)
     com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.new(Unknown Source)
     com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.verifyDatabase(Unknown Source)
     com.crystaldecisions.reports.sdk.ReportClientDocument.verifyDatabase(Unknown Source)
     org.apache.jsp.CrystalReportViewer_jsp._jspService(CrystalReportViewer_jsp.java:91)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:377)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:313)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:260)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:717)

Polling to Database not working sometimes

Hi all,
I have created an ESB project. I am using polling operation to poll Oracle database table. I am using update field i.e. logical delete opeartion under polling.
I have deployed my process, its running perfectly fine. Polling is also happening.
But the problem is that polling is not consistent. With the same set of values, sometime polling takes place and some time nothing happens, means no update in the table & no instanses on ESB Console.
I have checked the log file too, but no such entry is there.
To overcome this problem, Whenever I restart my SOA server(10.1.3.3) everything works fine. But after few hours same thing happens.
Can anybody tell me, how to figure out what is happening.
Thanks,
Abhi...
Message was edited by:
Abhishek saurabh

Hi chintan,
I made this change in the logger configuration yesterday. Today morning when I logged into my ESB console and navigated to instance tab, I am not able to see any instance and I am getting this error:
An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.tip.esb.model.repository.exception.RepositoryException: Unable to get connection to Repository Ensure repository is accessible at oracle.tip.esb.model.repository.database.DatabaseRepository.getConnection(DatabaseRepository.java:1228) at oracle.tip.esb.model.repository.database.DatabaseRepository.getESBParameter(DatabaseRepository.java:1082) at ......<more..>
(Thread.java:595) Caused by: java.sql.SQLException: ORA-00257: archiver error. Connect internal only, until freed. at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138) at
.....<more>
So I went to EM console, oc4j_soa->Administration tab->JDBC resorces->Connection pool->ESBpool(For ESB)->Test connection->Pressed Test button.
I am getting this error:
Unable to establish connection to "ESBPool". Error message: Exception occurred testing connection. Exception: java.sql.SQLException: ORA-00257: archiver error. Connect internal only, until freed
Any inputs on this...
Thanks,
Abhishek...

Apache conf file not working

I've seen instructions all over the internet about rewriting a .conf file to get Apache to see your user "Sites" folder in Mountain Lion. Mine refuses to work. The server still works at localhost, but localhost/~user will not, I get "Safari cannot connect to server localhost."
I'm really the only user that uses it, is there any problem with just changing to document root in the httpd.conf file to /Users/user/Sites?
Or, any ideas about the user.conf file? Permissions are correct, file is correct, apache restarted.

Interesting. I ran apachectl configtest, and it found a syntax error in my user.conf file, which I thought I deleted. All this time I've been working in /etc/apache2/users, as the online tutorials specify. The other .conf file, brought to my attention by the configtest, is in /private/etc/apache2/users.
The error: a space between allow,deny.
Fixed the error... all is well. Thanks for the configtest tip... I never knew about that one.

Apache Derby database not working

Similar Messages

Maybe you are looking for