Apache / JRUN setting up trust between two app servers
Hi,
I have two applications running on Apache web server and JRUN app server.
How can i setup a trust domain between the two jrun app servers so that the user doesnt have to enter authentication credentials in both the servers when forwarded from app server 1 to app server 2?
Thanks in advance
I researched that we can do a "fake" authentication by using cookies. Has anyone does this before? Can somebody guide me on this?
Similar Messages
-
Two-way forest trust between two (single domain) forests with multiple identical user ID's
Domain and forest levels - Windows 2003 (they both have one 2008 R2 DC)
We need to create a two-way forest trust between two separate single-domain forests. The problem is that these two forests already access each others resources through a S2S. Users have the same login names and passwords on both forests/domains. Now, we
are combining their infrastructures and need to set up a trust. From what I'm reading, you can't create forest trusts if you have the same SIDs, user ID's, or computer name in each of the forests.
I'm looking into AD migration tool to copy the userSIDs (SID history?) between forest/domain, deleting the user ID's in the domain we migrated from, and then setting up the trust, but I'm leery about doing it this way as there is no easy 'recovery' should
something go wrong.
Any suggestions for the easiest way to setup this forest trust?Hi,
To eliminate your worries, two user accounts have the same user name doesn’t mean that they have the same SID. Moreover, the user’s SID remains the same even after it has been renamed.
The SID for domain account/group consists of a
Domain Identifier and a Relative Identifier. Domain Identifier is unique in every domain within a forest, and a Relative Identifier is unique within domain. It is unlikely that two user accounts with or without the same account
name from two forests have the same SID.
The Technet article you mentioned is talking about duplicate SIDs instead of “duplicate computer name or user account”, I will submit a change request to Microsoft about this.
If there are duplicate SIDs when you create forest trust, you need to delete one of them as the article guides.
Here are some related articles below for your references:
How Security Identifiers Work
http://technet.microsoft.com/en-us/library/cc778824(v=WS.10).aspx
Security Identifier Structure
http://technet.microsoft.com/en-us/library/cc962011.aspx
Security Identifier
http://en.wikipedia.org/wiki/Security_Identifier
I hope this helps.
Amy Wang -
How to create Trust between two domain
How to create Trust between two domain:
please helpHi,
By default, two-way, transitive trusts are automatically created when a new domain is added to a domain tree or forest root domain using the Active Directory Installation
Wizard. The two default trust types are defined in the following table. However there have others many types of the AD trust, please refer the following KB to determine which type you need:
Trust types
http://technet.microsoft.com/en-us/library/cc775736%28v=ws.10%29.aspx
More relate KB:
Creating Domain and Forest Trusts
http://technet.microsoft.com/en-us/library/cc740018(WS.10).aspx
The related third party article:
How to configure Forest Level Trust in Windows Server
http://blogs.interfacett.com/how-to-configure-forest-level-trust-in-windows-server
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control
these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the
use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Authentication needed after doing trust between two different domains.
Hi There,
I have a problem when i did the trust relationship between two different domains in two different forests ,,in the trust relationship steps all working two ways trust,with external trust,stub zone created on both domains and they are validated in both sides
,,my problem is with the objects it can't be retrieved from side and it can be from the other side . For instance :
NY domain can get the users and computers of 2012DC1
but 2012DC1 can't get the users and computers of NY
Date and time are the same,i am always getting this error
The session setup from computer '2012DC1' failed because the security database does not contain a trust account 'test.com.' referenced by the specified computer.
USER ACTION
If this is the first occurrence of this event for the specified computer and account, this may be a transient issue that doesn't require any action at this time. If this is a Read-Only Domain Controller and 'test.com.' is a legitimate machine account
for the computer '2012DC1' then '2012DC1' should be marked cacheable for this location if appropriate or otherwise ensure connectivity to a domain controller capable of servicing the request (for example a writable domain controller). Otherwise,
the following steps may be taken to resolve this problem:
If 'test.com.' is a legitimate machine account for the computer '2012DC1', then '2012DC1' should be rejoined to the domain.
If 'test.com.' is a legitimate interdomain trust account, then the trust should be recreated.
Otherwise, assuming that 'test.com.' is not a legitimate account, the following action should be taken on '2012DC1':
If '2012DC1' is a Domain Controller, then the trust associated with 'test.com.' should be deleted.
If '2012DC1' is not a Domain Controller, it should be disjoined from the domain.
Can you please help me in this error.
Thank You in advance.Hello,
"The session setup from computer '2012DC1' failed because the security database does not contain a trust account 'test.com.' referenced by the specified computer. "
This belongs to the machine 2012Dc1 in test.com and not to the other domain from your trust. Seems for me that you mix the trust with the problems of the machine 2012DC1 in test.com.
In this error message 2012DC1 has lost the trust to its OWN domain and therefore you have to find the reason. How exactly was this machine installed?
Or was there a restore on that machine from not supported type of backup like image/clone/snapshot?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
How can i set the space between two button?
Hello,
I have
<mx:HBox>
<mx:Button label="one" />
<mx:Button label="two" />
</mx:HBox>
how can i set the distance between this two compotents?
Thanksquote:
Originally posted by:
robinbouc77
Hi,
you can use horizontalGap property on HBox to change the
space between your buttons. I think the default value is 6. You can
also use <mx:Spacer/>, but changing the gap on HBox is
probably the cleanest way ;)
C U
perfect!!! works fine -
Set a relation between two or more images
Is it possible to create a relation between two or more images?
For example: We have an image in three versions (rgb, cmyk, gray). If I find one of these, I would like to klick on a button like "show correspondend images". So I can see all versions of this images we ever saved.
Any idea?
Best regards!
RomanI don't think Lightroom handles cmyk images.
For rgb and gray, you can stack the images, or make the gray from a virtual copy of the rgb. In this way, simply unstacking the images results in your requested "show corresponding images". -
Linking JMS Queues between two managed servers
I have an environment setup with an AdminServer and multiple managed servers all under the same domain and on the same cluster. They are all running under the same Instance of weblogic on one Windows Server.
I have two different applications on two managed servers that need to have a JMS Queue be linked between them. Essentially have Server1's 'inbox' link to Server2's 'outbox' and Server2's 'inbox' link to Server2's 'outbox'. Each has their own name for their inbox or outbox.
Server1(inbox)=Server2(outbox)
Server2(inbox)=Server1(outbox)
I've tried using Foreign JNDI Providers, however it doesn't allow me to input two addresses (Server1 and Server2).
Is there another function that would do the same thing?
Thanks!You can make use of Message Bridges between any 3th party JMS provider or SAF (store & forward) if both jms servers are weblogic servers.
Schelstraete Bart
[email protected]
http://www.schelstraete.org
http://www.linkedin.com/in/bschelst
Edited by bschelst at 04/07/2008 1:27 PM -
Ale / Idoc between two different servers
Hi All,
In my scenario i am working on two different servers in which distribution of idoc is carrying out.
(Before this i have worked on same server scenarios with different clients.)
But present scenario i am working with two diferent servers,
like,
i am having 100 client in server A (sender system) and 700 client in server B(receiver system),
i have created all the basic steps like logical systems in both systems,
Assign logical systems to clients in consecutive servers,
RFC's and ports.
while creating message type under model view in server A client 100(sender system ) i can find only 100 client's logical system name, i cannot find the 700 clients logical system name.
due to both clients are in different ip address , does we need to transfer the logical system assign ment transport request to other client.
regards,
Mohd.Hello abdul ,
When you configure a logical system for example the same system with a different client (700) it should be configured in the source system (Client 100).
In this way when you can send the relevant IDOCs via the ALE according the model view (BD64) ,the source system (100) knows that the target is the system with the client 700 .
(There is a generic RFC in the background process : INBOUND_IDOC_PROCESS).
Sender : system_100
Receiver:system_700
Message type : MATMAS
Also in order to accept the relevant Idocs in the system with client 700,you must configure a partner profile that will contain in inbound parameters the relevant message type (MATMAS).
I hope it is more understood .
Thank you,
Boaz -
Transferring data between two production servers
HI All,
I have read weblogs in transferring scenarios from Dev to Qual to Prod.
But I have a different requirement in which I have to transfer data from one production server to another production server without distrubing the first production server.
Say A and B are two production servers, I wanted to transfer data from A to B on daily basis.
Please give me some ideas on this....
Thanks
VeniHello,
I would suggest to use IDOC for transferring data (master \ transaction ) ... to do that you need to setup logical system (prod b) and RFC connection to connect to system prod b ...
Also distributional model need to setup for pushing the outbound idoc into RFC connection through receiver port.
Thanks
Krish -
How do i set the multiplicity between two entities to any custom value?
Hello people,
is there a way to set the multiplicity of a relation to custom values instead of only 1 or * in the logical model?
I really need to set it to "1..2" but can't find an option to set own numbers. What should i do? Shall I just create a note saying "1..2" and stick it to the corresponding entity? I'm used to do models in UML (visual paradigm - where you can change such things easily) but now i have to use the SQL Developer 3.2
I would appreciate any help.
Thanks
Edited by: 961075 on 24.09.2012 15:54Hello,
it's not possible.
Philip -
Setting up BI on two seperate servers
Hi
We are currently on NW2004s SP9. The enterprise portal is installed on a seperate server than the BW server.
What is required now is that I set up a connection between the two servers. I need to set up business explorer on the enterprise portal, but it needs to connect to the bw server.
Where can I find complete step or notes in doing this.
thanks
MariusAlso, see this webinar:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/2421b12f-0c01-0010-d385-a0f972a25350 -
Routing issue between two Linux servers
Hello, I have a fedora box with IP Masquerading setup. I used the instructions on tldp.org (http://tldp.org/HOWTO/IP-Masquerade-HOWTO/firewall-examples.html) to set it up. The problem is that I can't ssh from my firewall box to any internal linux box. my firewall is configured eth0 as internal and eth1 as external and just using basic iptables ruleset from the tutorial. When I try to ssh to my internal box 192.168.0.x from the external box I get " ssh: connect to host 192.168.0.x port 22: No route to host". I can ping the ip fine. My routing table looks like this:
[root@oracle rc.d]# ip route show
192.168.0.11 via 192.168.0.1 dev eth0
192.168.0.0/24 via 192.168.0.1 dev eth0
external_IP/24 dev eth1 proto kernel scope link src ISP_address
169.254.0.0/16 dev eth0 scope link
default via ISP_gateway dev eth1
[root@oracle rc.d]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.11 192.168.0.1 255.255.255.255 UGH 0 0 0 eth0
192.168.0.0 192.168.0.1 255.255.255.0 UG 0 0 0 eth0
external_IP 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 ISP_gateway 0.0.0.0 UG 0 0 0 eth1
what's wrong with my routing table? Please help.
BTW: the natting works fine, I can ssh to the firewall box on both interface fine. just can't ssh/telnet from the firewall to anywhere else.
Thanks.what are your AD costs between A, B and C?
In Exchange 2010, each message recipient is always associated with only one Active Directory site, and there is only one least cost routing
from the source Active Directory site to the destination Active Directory site
If the least-cost routing path to the primary site contains any hub sites, the message must be
routed through the hub sites -
Integration between two oracle servers 8i and 9i
With the name of ALLAH,
Dear Friends,
I want to connect / share the data of two oracle databases installed on different LANs and static IPs. i.e
202.125.155.20 and 202.125.152.30
But the problem is that I am unable to connect both databases by connection string in tnsnames.ora
I want to share the data by writting event based trigger between both of the databases.
Note: One database is 8i Enterprise and other is 9i Enterprise
Please tell me in detail that what should I do?
I would be thankful to you.
Faisal,
[email protected],
9203335146832hi Faisal Rafique
i have working in same situation.
u will make 2 entries in tnsname for 2 server.
like
oracle8I =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 202.125.155.20 )(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = oracle8i)--enter u r service name of 8i
another entries for 9i database
oracle9I =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 202.125.155.30 )(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = oracle9i)--enter u r service name of 9i
thanks
kuljeet pal singh -
we have 2 solaris servers interconnected by a stunnel. will the clustered databus that I establish between these two servers operate successfully on the stunnelized tcp connection?
You indicated the servers didn't come up correctly. Did you run "svcs -xv" on the servers to see if any services are having problems? It is my practice to run this command after rebooting a server to make sure it came up properly and if not, to identify which services have problems which need to be addressed. If you've not done this already, I'd start there. The zones service comes up rather late in the boot process and may not be up properly if there are other problems.
-
Migrating data between two portal servers - same version
I recently set up a new host to replace our existing Portal 6.0. Both hosts are running Solaris 9 and Portal 6.0. Right now, both hosts are up and running. Are there any docs on copying, or migrating the data from the old host to the new?
I want to make sure we get all relevant information including user info, user settings and desktop layout etc. We are using the sample desktop that comes with Portal 6.0.
I was wondering if I could accomplish this by backing up the LDAP database and restoring it on the new server. The only problem with this is there may be embedded references to the original server name and that would hose the new server.
Any ideas on how the best accomplish this task?Hi to all,
Client side eventing can be used when my both portal components are on same page , but here my portal components are not on same page to be more precise , i wanted to share a parameter between logon module and mast head component , so
basically when use enters user name and password
at that time my logon module is called and now after authentication , we get into the applications on top of which mast head component is present .
In this case how to share the parameter ??
Regard
Govardan
Maybe you are looking for
-
My macbook air will no longer connect to my wifi automatically, I have changed the preferences to automatically selecr known networks but everytime i open the macbook air or after i restart the macbook, i will need to manually l select the wifi. How
-
Mic on headset only works when downward pressure is applied to the connection to the mic jack
can anyone help with this? Seems like bad connection, can it be fixed for a reasonable cost?
-
Lost songs on my computer can I sync my iphone
I Recently upgraded my iMac and lost all of my iTunes songs in the process. Can I recover all of my songs by syncing my iPhone with my new computer or will my iPhone songs get erased?
-
Lenovo b590 20208 windows 7 64bit home premium
Hello all! (Sorry for bad English but I need help!) I need drivers for the laptop in title, I search but I find many options and I don't know what is the right driver! Is any here can list drivers for download??
-
Good Morning all, I am trying to fumble my way through building a calc script to run a forecast for 12 months. The code below seems to be doing what I want it to for 2013 but does not carry over into 2014. LOOP(12) FIX(&FcstBaseline:"Dec","Ending","W