Set a relation between two or more images
Is it possible to create a relation between two or more images?
For example: We have an image in three versions (rgb, cmyk, gray). If I find one of these, I would like to klick on a button like "show correspondend images". So I can see all versions of this images we ever saved.
Any idea?
Best regards!
Roman
I don't think Lightroom handles cmyk images.
For rgb and gray, you can stack the images, or make the gray from a virtual copy of the rgb. In this way, simply unstacking the images results in your requested "show corresponding images".
Similar Messages
-
How can I make a server differ between two or more clients?
How can I make a server differ between two or more clients?
The clients can connect and talk to the server fine, but how can I make the server talk to one, two or all clients? i.e. what would be a good way to implement this?
Currently, the server listens for connections like this:
while (listening) {
try {
new ServerThread(this, serverSocket.accept()).start();
I guess one way would be to add the ServerThreads to a Hashtable with the client ID as key, and then get the ServerThread with the proper client ID, but this seems unnecessary complicated. Any ideas?Complicated was perhaps the wrong word, I should have
written something like it doesn't "feel" right. Or is
this a common and good way to solve communication
between a server and multiple clients?Thats pretty much how I do it. I normally use an array or ArrayList of Sockets instead of HashTable, with [0] being the first player etc.... Then you can communicate with exactly who you want. If you want to send bytes to all of them, just send the same thing to each socket individually (or is there a better way to do this?). -
Error 33172 occurred at Read & Write data transfer between two or more PF2010 controller
Hi,i need to do data transfer between two or more FP2010 controller.e.g. FP2010(A) & FP2010(B).
FP2010(A) need to transfer the measurement (from its I/O module) to FP2010(B) to do the data analysis.These data transfer should be synchronous btw two controller to prevent data lost.
From the vi used in the attachment,i encountered some problems at:
(1) Error 33172 occurred while publishing the data.Can i create and publish data under different item name?
(2) How to synchronies the read & write btw contorller?
All controller are communicating with each other directly without the need of a host computer to link them together
Is there any other method to do fast data transfer betwe
en controller?Hi YongNei,
You were succesful in omiting enough information to make it very difficult to answer!
Please post your example.
Please tell us what version of LV-RT you are using.
Please define what you concider "fast data transfer".
Have you concidered mapping the FP tags of FP2010(A) to FP2010(B) and vise versa?
WHat exactly has to be syncronized?
If you have something that is close to working, share that.
Well, that as far as I can go with the info you have provided. Depending on the details, what you are asking could be anything from trivial to impossible with the currently available technology. I just can't say.
It would probably be a good idea to start over with a fresh question (sorry) because not many people are going to know what a a "
PF2010" is and I can not guarentee that I will be able to get back to you personally until next week-end.
Trying to help you get an answer,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Using built-in function in the definition of relation between two blocks...
Hi ,
Is it possible to define a relation between two form blocks(db based) ....
I have a master table such as:
table : strdet (cols: ms varchar2(10) , det varchar2(10))
materialized view : mv (cols : det varchar2(10) , sum_a number(5), sum_b number(5))
and data:
strdet
ms det
1 1.1
1 1.2
1.1 1.1.1
1.1 1.1.2
1.1.1 1.1.1.1
e.t.c.
and for the mv
det sum_a sum_b
1 500 300
1.1 100 200
1.2 540 150
e.t.c.
I have tried some versions of relations so as to create a master-detail relation(in reality , the two blocks are connected via ms.det
->mv.det... but the relation is one-to-one....) . I want a result such as:
Master block
1.1
Detail Block
1.1.1
1.1.2
e.t.c.Is it possible somehow...????
Note: I use Dev6i and Dev10g ...
Thanks ,,,
SimI think you'll have to use a from-clause-query for the detail block. If you join the master table and the mv on the DET column then you can give each row in the detail block a MS column (from the master table) which you can use in the relation.
-
Create relation between two blocks which are based on different procedure
Hiii
How to create relation between two blocks which are based on different stored procedures in Oracle form??
Pradhyumn Sharmahiii,
I selected the common key deptno in both procedure.
I created a relation between both procedure. but when i compile the form it give an error in ON-CHECK-DELETE-MASTER. My procedure are
==================================
PACKAGE emp_pkg AS
TYPE emprec IS RECORD(
empno asg_emp.empno%type,
ename asg_emp.ename%type,
job asg_emp.job%type,
sal asg_emp.sal%type,
deptno asg_emp.deptno%type);
TYPE emptab IS TABLE OF emprec INDEX BY BINARY_INTEGER;
PROCEDURE empquery(block_data IN OUT emptab, p_deptno IN NUMBER);
end;
====================================
PACKAGE dept_rec IS
type rec is record(dname asg_dept.dname%type,
loc asg_dept.loc%type,
deptno asg_dept.deptno%type);
type deptrec is table of rec index by binary_integer;
PROCEDURE dept_rec1(block1 in out deptrec);
END;
===================================
In ON-CHECK-DELETE-MASTER
CURSOR BLOCK9_cur IS
SELECT 1 FROM dept_rec.dept_rec1 d
WHERE d.DEPTNO = :BLOCK6.DEPTNO;
identifier dept_rec.dept_rec1 must be declared.
Regards
Pradhyumn -
How to check relation between two tables in same database
How to check relation between two tables in same database using Oracle SQL developer. Version 2.1.1.64
Hi,
Try this,
SELECT cons.owner AS child_owner, cons.table_name AS child_table,
cons.constraint_name constaint_name,
cons.constraint_type constraint_type, col.owner parent_owner,
col.table_name parent_table, col.column_name column_name
FROM dba_cons_columns col, dba_constraints cons
WHERE cons.r_owner = col.owner
AND cons.r_constraint_name = col.constraint_name
AND col.owner = 'MY_USER'
ORDER BY child_table;Thanks,
Shankar -
How to share the data between two or more frames
How to share the data between two or more frames based on the database relationship in JDeveloper?
You can pass data between frames by passing it as parameters.
That is when you are invoking another frame, pass your data as arguments through the constructor to that frame .
You can also achieve this through static or public methods, but static variables as we know is not suggested which might occupy more memory space.
Regards,
Srinivasan AShwath
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
How to share the data between two or more frames based on the database relationship in JDeveloper? <HR></BLOCKQUOTE>
null -
Drag & Relate between two BW reports
Hello together,
I want to implement the Drag&Relate functionality between two BW Reports via EP 6.0. I have configured the connection between Portal and BW with the report RSPOR_SETUP. The SingleSignOn and the import of business object is working well. After that, I took 2 BW testreports which were prepared for D&R. When I now drag the customernumber of report1 to the target report2, I get the error message "No relation found between the source and target business objects". The business object in both reports is 0CUSTOMER, so what relations should be set?
Where is the mistake, could anybody help me?
Thanks and regards.
Gerd NedderhoffHi Gerd,
You have to link the two iviews. First double click the first iview. Then right click the second iview and make it as the target iview. Then in the navigation panel you see the other iview in the Drag and relate section.
Regards
Arun -
How to create an relation between two block
Oracle forms 6i
Hai All
I have created a form in that i have four button ADD, QUERY, SAVE ,EXIT.
I have two block named Leader and members.
Four fields in leader block namely name , codeno, deptcode, unitid.
When i pressed query button and the cursor goes to name field in leader when i enter the name of leader and click
enter i gives the codeno, deptcode and unitid of the leader_name.
so now i have created another block in tabular structure to bring the members in the same deptcode that belongs to Leader_name.
So pls tell me the steps how to create the relation between these two blocks.
when i enter the leader_name and gives enter it needs to bring the codeno, deptcode, unitid and
I also need to gives the members in that deptcode..
Thanks In Advance
Srikkanth.MIf it is possible to create relationship with one table No.
Or
I have created a pre-Query in the detali block and my code is
set_block_property ('block_name', default_where, 'deptcode = (select deptcode from emplmaster where name like :block_in_which_leader_name.leader_name_field');BTW no need of joining here it can be solve by set the block's where clause as u said in ur earlier post above. Just changing the little bit this statement and then try.
If numeric
set_block_property ('block_name', default_where, 'deptcode = '||:block_in_which_leader_name.leader_name_field);
Otherwire
set_block_property ('block_name', default_where, 'deptcode = '''||:block_in_which_leader_name.leader_name_field||'''');-Ammad -
How can i set the space between two button?
Hello,
I have
<mx:HBox>
<mx:Button label="one" />
<mx:Button label="two" />
</mx:HBox>
how can i set the distance between this two compotents?
Thanksquote:
Originally posted by:
robinbouc77
Hi,
you can use horizontalGap property on HBox to change the
space between your buttons. I think the default value is 6. You can
also use <mx:Spacer/>, but changing the gap on HBox is
probably the cleanest way ;)
C U
perfect!!! works fine -
Link between two or more reports
Hi All,
I want to make a link between two Hyperion Financial Reports. I'm working on HFR 9.3.1 version.
For example :-
There must be an option in report, like a hyperlink to open another report. After a click on the link it will open the linked report.
I tried one option "Add releated contents" but that works only on grid which are having cell values but what I'm looking is to give a link on text and from that text link user will able to navigate.
Regards,Sorry I just thought of a workaround
You do have to use related content on a data value but you can use formatting to hide everything but the link. Use the REPLACE tab within the cell format to relace the data value with a text string (what you want your URL to display as). If you want it as a menu then you could do this in a seperate grid altogether to save you having to mess with your actual report grid too much.
Hope this helps
Stuart -
Directions between two or more points on the map
Anyone knows of an app for OSX and iOS where one can get directions between two or three or more points. (not a point and current location). In particular an app where one could create a multi-stop trip on OSX and then push it on to an iOS device where it would work as a map and as a navigator?
Tip: Apple Maps apps can't do this. They only allows one pin on the map and directions form current location to the map. Which is utterly useless for trip planning. And yes I know I can use Google Maps for that. But I want to stay away from Google.
Thank you all for your input.you can get directions between two points neither of which is your location on the current ipad app. steps:
launch the app
drop a pin on one of the points
click on the right side of the baloon that opens over the pin
select directions to or from the location
a pane opens on the left side of the app
click into the start or end field that has "current location"
type in your desired start/end point and select the correct location from the drop down list that populates as you type
click on "route"
your route options will appear between the two points -
How do i compare the similarities between two or more text files?
The subject says it all. I am familiar with a number of the diff tools that are available, but I have yet to find a tool or app that will find the similarities between two text files. Any suggestions?
From http://hints.macworld.com/article.php?story=20030217061153119
"FileMerge highlights the sections that differ in each file..."
I need to find similarities. I was thinking something along the lines of the similarity-tester package in Ubuntu:
http://unix.stackexchange.com/questions/1079/output-the-common-lines-similaritie s-of-two-text-files-the-opposite-of-diff/94532#94532
Preferably a GUI tool, but command line is OK if I can figure out the proper syntax. -
Creating a Relation between two Blocks - the Join Condition [SOLVED]
Hi. I'm trying to create a Relation between my TTMS_Audit table and my Bundle_Exceptions table. This is the join condition:
ttms_audit.primary_key_values = bundle_exceptions.project_cd||','||bundle_exceptions.bundle||','||bundle_exceptions.exception_cd
And I get the following error:
FRM-15004: Error while parsing join condition
Does anyone know if my concatenated values in the Join Condition are allowed? Can I even do this? Is there a logical work around?Got it.
I first created the concatenated values as a non-base table item on my form:
:NBT_PRIMARY_KEY_VALUES := :bundle_exceptions.project_cd||','||:bundle_exceptions.bundle||','||:bundle_exceptions.exception_cd;
Then my join condition simply became:
ttms_audit.primary_key_values = bundle_exceptions.nbt_primary_key_values -
Hello,
I have many blocks that based on some views. first every thing is ok when i insert record on them, but when i do an execute query i'm able to navigate between blocks in on way like (next, next) but when do previous i missed the sync between the blocks. So i decided to make some relations between these blocks. i have a main block that i take for my master and i constructed the relations master-details between my main block and others.
now when i run form i received that error ''FRM-30415 the details block of the relation is a control block'', and it give me the relation's name. I have to mention that the QUERY_DATA_SOURCE_NAME is from clause for every blocks.
as i said the blocks are based on views.
could someone help me?Is the "Database Data Block" property of the detail block "Yes"?
Maybe you are looking for
-
What's the difference between 4.0 Beta and the current 3.2.1? What is Beta? Should I download 4.0 Beta?
-
To share the internet through my I mac, I have created the necessary network. But the problem is I have forgotten the password created by me to access the Internet Sharing. Can somebody tell me how to completely reset the password for Internet sharin
-
i jst created an apple acount.its asking me to put a credit card number.what is i dont have one????help pls
-
How to have a line down middle of page betw 2 columns but...
for some graphics, the graphics flow over the two columns. In setting up a template, how to make that line be flexible so that when there is a graphic that takes up more space, the graphic has an amount of white space around it..(would that be an obj
-
Error exporting quicktime movie
I have Keynote 2 and the latest quicktime. I try to export the simpliest background/text slideshow to a self-playing quicktime movie and I always get an error that either I don't have enough memory, or there is a problem with the file. I have tried d