Apache's configuration for Bugzilla [Solved]

Hi to everyone:
I've installed bugzilla and I've followed the documentation for configuration; at the point 2.2.4 says: "Configure your web server according to the instructions in the appropriate section. (If it makes a difference in your choice, the Bugzilla Team recommends Apache.) To check whether your web server is correctly configured, try to access testagent.cgi from your web server. If "OK" is displayed, then your configuration is successful."
But this test isn't sucessful for me (the page shows only code)
Someone else with the same problem ... anyone knows how to fix it?
Last edited by Ravenman (2009-11-06 16:54:55)

kermana wrote:
I have the following section in my httpd.conf, maybe you are missing these:
<Directory /srv/http/bugzilla>
AddHandler cgi-script .cgi
Options +Indexes +ExecCGI
DirectoryIndex index.cgi
AllowOverride Limit
</Directory>
I've found the mistake, this was my section :
<Directory /srv/www/html/bugzilla>
AddHandler cgi-script .cgi
Options +Indexes +ExecCGI
DirectoryIndex index.cgi
AllowOverride Limit
</Directory>
One brief distraction, I'm fixed it now ... and Bugzilla works. Thank you for your interest and help, Kermana. Until the next!

Similar Messages

While installation, Apache listener configuration for 9ias at window screen

Hi,
I installed 8.1.7 enterprise edition oracle on windows 2000 and also removed IIS from windows .
While installing 9IAS Minimal edition , the problem i get is that
apache listener configuration for 9ias at windows screen doesnt splashes..
However , complete successfully message coming ...
But there is no Http Server or any 9ias product installed actually
What is wrong here ?
thanks in advance
Regards,
Defne

Hi,
I installed 8.1.7 enterprise edition oracle on windows 2000 and also removed IIS from windows .
While installing 9IAS Minimal edition , the problem i get is that
apache listener configuration for 9ias at windows screen doesnt splashes..
However , complete successfully message coming ...
But there is no Http Server or any 9ias product installed actually
What is wrong here ?
thanks in advance
Regards,
Defne

No logs flowing in uio log of UIO Apache Proxy configured for OAAM 11gR2

Hi,
I had configured and tested the UIO proxy and OAAM deployment.
Configured the UIO logging as per documentation.
But the HTTP traffic logs are not flowing in uio.log; infact no logs are flowing in uio.log.
This is very much required for me to write interceptors.
UIO Proxy is configured on Apache Webserver running on Win 2008 R2
Can you please let me know how uio logs are enabled ?
THanks
Karthik S

Hi,
I had configured and tested the UIO proxy and OAAM deployment.
Configured the UIO logging as per documentation.
But the HTTP traffic logs are not flowing in uio.log; infact no logs are flowing in uio.log.
This is very much required for me to write interceptors.
UIO Proxy is configured on Apache Webserver running on Win 2008 R2
Can you please let me know how uio logs are enabled ?
THanks
Karthik S

Httpd.conf configuration for Apache plugin

Hi,
anyone have a sample httpd.conf file configured for proxy to WL 6.1, but only
limited content?
Meaning : static content is served on the apache (gifs, html, ...) and ALL THE
REST is proxyd to WL...
The WL part i guess is like this :
<IfModule mod_weblogic.c>
WebLogicCluster x:7001,y:7001
CookieName WebLogicSession
MatchExpression *.*
</IfModule>
Its the Apache part I cant find any info on.
Thanks in advance.

try this:
<IfModule mod_weblogic.c>
WebLogicCluster x:7001,y:7001
CookieName WebLogicSession
MatchExpression /SERVLET_NAME
MatchExpression *.jsp
</IfModule>
That should do it ... but you should know that there are more problems down that way ...

Compile Apache plug-in for WL7.1 SP4

Hi all,
Several advisories of Apache have been published. We would like to acquire the latest Apache version. According to the information of BEA. Apache plug-in of WL71SP4 is only provided for Apache 2.0.42-2.0.49. As a result, a new plug-in is needed: we would like to compile one.
We only have compiled Apache plug-in (with WL71SP4). We cannot find the source in WL71SP4.
Does anyone know how can I compile a Apache plug-in for the latest Apache version? Preferably, we would like to use APXS for the compilation.
Does anyone know if we can use the existing plug-in in latest Apache version? We have encountered problems before -- the plug-in refuses to start and complains about incorrect magic string of the Apache version.
Thank you very much.
Regards.

I'm using the mod_wl_ssl.so for Apache on Linux from service pack 5. I
          understand that the communication from Apache to WLS will be via http...
          that's not the issue.
          I think what would solve the issue would be if someone from BEA could post
          an httpd.conf file that was configured correctly to use the ssl proxy for
          Apach on Linux. Also, I can't seem to get clarification if openssl is or is
          not supported.
          Can you post a correctly configured httpd.conf file that was used in testing
          the ssl proxy as well as confirm whether or not openssl is supported???
          Steve...
          Vinod Mehra wrote:
          > Also note that currently we do not support https between the plugins and
          >
          > WebLogic. https requests will be degraded to http. So the WebLogicPort
          > parameter in the plugins should point to the http port of WebLogic.
          >
          > https between plug-ins and WebLogic will be available in near future.
          >
          > --Vinod.
          >
          > Vinod Mehra wrote:
          >
          > > > Are there any known issues with the Apache SSL proxy???
          > >
          > > No
          > >
          > > > I've setup the ssl
          > > > proxy but can't access any WL content via https... http works ok
          > > > though. Also,
          > > > does BEA support openssl or just Stronghold and Raven???
          > >
          > > Yes. Try using mod_wl_ssl.so from 510 SP4 or later.
          > >
          > > --Vinod.

ASA 5505 configured for WebVPN connecting to Citrix Web Interface

ASA 5505 configured for WebVPN connecting to Citrix Web Interface.
i have a ASA 5505 that I am attempting to configure for WebVPN with passthrough into Web Interface . The user authenticates into WebVPN OK and gets the option to click on the Citrix Link (which is i add bookmark citrix server http:// 172.30.40.5.) i enter the citrix and then for example i want to open to outlook it can not open. (when i want to open some application no application is open)).there is no alarm at asa. how i solve this issue?
thanks.

Teymur,
Can you confim that after disabling the ssl/tls on the Citrix server (secure connectivity) that you are getting exactly the same error. It is possible that it is generating a different error.
The bug where we have see the existing error was CSCtf06303 but that has been fixed in 8.4.1. Can you confirm the exact version of code you are running on the ASA.
If you have confirmed the above two notes it may be adventageous to open a TAC case as we may need to do some live additional troubleshooting.
Thanks
-Jay

Setting up the Apache HTTP Plugin for several BEA Servers

Hey together,
i would like to setup the apache http plugin for several bea-servers.
I am running apache 1.x on my hp-ux system. There are 2 bea-server-domains on this box and both should be proxied by the plugin simultaneously.
As far as i know it isn't possible to run 2 or more instances of the apache webserver. I heard of virtualhosts, maybe i should try this one out.
Somebody knows how to deal with this problem or does any1 know if virtualhosts could cope with my needs?
Thanks in advance

Ok here i am again and i'm stuck. Here my wishes again:
there are 2 weblogic-instances (domains) running on a machine xxx, instance A listening on port 8041, instance B listening on port 8051. I want to configure apache virtualhosts in combination with weblogic plugins, so that request with /ld will be sent to instance A while requests with /ldd will be sent to instance B. Both are no clusters. Therefore i tried it with the following configuration (httpd.conf):
<VirtualHost xxx:8080>
     DocumentRoot "/opt/hpws/apache/htdocs"
     ServerName xxx:8080
     <IfModule mod_weblogic.c>
     WebLogicHost xxx
     WebLogicPort 8041
     #MatchExpression *
     #PathPrepend=/test2
     </IfModule>
     <Location /ld>
     SetHandler weblogic-handler
     PathTrim /ld
     </Location>
</VirtualHost>
# VirtualHost2 = xxx:8090
<VirtualHost xxx:8090>
     DocumentRoot "/opt/hpws/apache/htdocs"
     ServerName xxx:8090
     <IfModule mod_weblogic.c>
     WebLogicHost xxx
     WebLogicPort 8051
     #MatchExpression *
     #PathPrepend=/test2
     </IfModule>
     <Location /ldd>
     SetHandler weblogic-handler
     PathTrim /ldd
     </Location>
Doesnt really work. Can some1 help please?
Thanks

Error 404: No target servlet configured for uri: +websphere 6.0

My server is running properly, but I got Error 404: No target servlet configured for uri: error while launching my project on web sphere 6.0
see my web.xml and strut-config.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
id="WebApp_ID"
version="2.4"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<display-name>supportPortalWeb</display-name>
<servlet>
<servlet-name>action</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/struts-config/struts-config.xml</param-value>
</init-param>
<init-param>
<param-name>debug</param-name>
<param-value>2</param-value>
</init-param>
<init-param>
<param-name>detail</param-name>
<param-value>2</param-value>
</init-param>
<init-param>
<param-name>validate</param-name>
<param-value>true</param-value>
</init-param>
<load-on-startup>2</load-on-startup>
</servlet>
<servlet>
<servlet-name>OrganizationDataServlet</servlet-name>
<servlet-class>com.harcourt.supportportal.web.OrganizationDataServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>OrderProcessingServlet</servlet-name>
<servlet-class>com.harcourt.supportportal.web.ordermgmt.OrderProcessingServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>OrganizationValidationServlet</servlet-name>
<servlet-class>com.harcourt.supportportal.web.OrganizationValidationServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>ProductValidationServlet</servlet-name>
<servlet-class>com.harcourt.supportportal.web.ProductValidationServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>ProductGradeServlet</servlet-name>
<servlet-class>com.harcourt.supportportal.web.ProductGradeServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>action_tmp</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/struts-config/struts-config.xml</param-value>
</init-param>
<init-param>
<param-name>debug</param-name>
<param-value>3</param-value>
</init-param>
<init-param>
<param-name>detail</param-name>
<param-value>3</param-value>
</init-param>
<load-on-startup>0</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>action</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>OrganizationDataServlet</servlet-name>
<url-pattern>/servlet/OrganizationDataServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>OrderProcessingServlet</servlet-name>
<url-pattern>/servlet/OrderProcessingServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>OrganizationValidationServlet</servlet-name>
<url-pattern>/servlet/OrganizationValidationServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ProductValidationServlet</servlet-name>
<url-pattern>/servlet/ProductValidationServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ProductGradeServlet</servlet-name>
<url-pattern>/servlet/ProductGradeServlet</url-pattern>
</servlet-mapping>
<context-param>
<param-name>contextConfigLocation</param-name>
<param-value>/WEB-INF/spring-config/spring-config.xml</param-value>
</context-param>
<listener>
<listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
</listener>
<jsp-config>
<taglib>
<taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-html.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-nested.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-nested.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-template.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-template.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-tiles.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-tiles.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/epc.tld</taglib-uri>
<taglib-location>/WEB-INF/supportportal.tld</taglib-location>
</taglib>
</jsp-config>
<resource-ref>
<res-ref-name>jdbc/SupportPortalDataSource</res-ref-name>
<res-type>java.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
<!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.1//EN" "http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
<struts-config>
     
     <data-sources />
     
     <form-beans>
          <form-bean name="signOnHandlerForm" type="com.harcourt.supportportal.struts.signon.actionform.SignOnHandlerForm" />
          <form-bean name="signOffHandlerForm" type="com.harcourt.supportportal.struts.signon.actionform.SignOffHandlerForm" />
          <form-bean name="updatePersonForm" type="com.harcourt.supportportal.struts.sample.actionform.UpdatePersonForm" />
          <form-bean name="searchPersonsForm" type="com.harcourt.supportportal.struts.sample.actionform.SearchPersonsForm" />
          <form-bean name="updateProductForm" type="com.harcourt.supportportal.struts.product.actionform.UpdateProductForm"/>
          <form-bean name="searchProductsForm" type="com.harcourt.supportportal.struts.product.actionform.SearchProductsForm"/>
          <form-bean name="searchOrganizationForm" type="com.harcourt.supportportal.struts.mdr.actionform.SearchOrganizationForm"/>
          <form-bean name="updateOrganizationForm" type="com.harcourt.supportportal.struts.mdr.actionform.UpdateOrganizationForm"/>
          <form-bean name="exportOrganizationForm" type="com.harcourt.supportportal.struts.mdr.actionform.ExportOrganizationForm"/>
          <form-bean name="exportProductForm" type="com.harcourt.supportportal.struts.product.actionform.ExportProductForm"/>
     </form-beans>
     
     <global-exceptions />
     
     
     <action-mappings type="org.apache.struts.config.SecureActionConfig">
          <action
               path="/start"
               type="org.apache.struts.actions.ForwardAction"
               parameter="loginRendererDef"/>




          <action path="/product" type="org.springframework.web.struts.DelegatingActionProxy"
                    name="updateProductForm" parameter="method" scope="request" validate="false">
               <forward name="success" path="productInputDef"/>
               <forward name="failure" path="productInputDef"/>
          </action>




          <action
               path="/report"
               type="org.apache.struts.actions.ForwardAction"
               parameter="reportIndexDef"/>
          <action
               path="/user"
               type="org.apache.struts.actions.ForwardAction"
               parameter="userIndexDef"/>
          <action path="/login" type="org.springframework.web.struts.DelegatingActionProxy" name="signOnHandlerForm" scope="request" input="loginRendererDef" validate="true">
     <set-property property="secure" value="false"/>
          <forward name="success" path="loginLandingDef" />
          <forward name="failure" path="loginRendererDef" />
</action>

     <action path="/updatePerson" type="org.springframework.web.struts.DelegatingActionProxy" name="updatePersonForm" scope="request" input="productInputDef" validate="true">
     <set-property property="secure" value="false"/>
          <forward name="success" path="personIndexDef" />
          <forward name="failure" path="personInputDef" />
</action>
     <action path="/searchPersons"
               type="org.springframework.web.struts.DelegatingActionProxy"
               name="searchPersonsForm"
               scope="request"
               parameter="method"
               validate="true">
     <set-property property="secure" value="false"/>
          <forward name="success" path="personIndexDef" />
          <forward name="failure" path="loginRendererDef" />
</action>
     
     <action path="/updateProduct" type="org.springframework.web.struts.DelegatingActionProxy"
               name="updateProductForm" parameter="method" scope="request" input="productInputDef" validate="true">
     <set-property property="secure" value="false"/>
          <forward name="success" path="loginLandingDef" />
          <forward name="failure" path="/product.do?method=createOrUpdateProduct" />
</action>
<action path="/deleteProduct" type="org.springframework.web.struts.DelegatingActionProxy"
               name="updateProductForm" parameter="method" scope="request" validate="false">
     <set-property property="secure" value="false"/>
          <forward name="success" path="loginLandingDef" />
          <forward name="failure" path="/product.do?method=createOrUpdateProduct" />
</action>
<action path="/searchProducts"
               type="org.springframework.web.struts.DelegatingActionProxy"
               name="searchProductsForm"
               scope="request"
               parameter="method"
               validate="true">
     <set-property property="secure" value="false"/>
          <forward name="success" path="productSearchDef" />
          <forward name="failure" path="loginLandingDef"/>
</action>
<action path="/loadProducts" type="org.springframework.web.struts.DelegatingActionProxy"
          name="searchProductsForm" parameter="method" scope="request" validate="true">
     <forward name="success" path="productIndexDef"/>
     <forward name="failure" path="userIndexDef"/>
</action>
<action path="/exportProduct" type="org.springframework.web.struts.DelegatingActionProxy"
          name="exportProductForm" parameter="method" scope="request" validate="true">
          <forward name="failure" path="loginLandingDef" />
</action>

<action path="/searchOrganization" type="org.springframework.web.struts.DelegatingActionProxy"
          name="searchOrganizationForm" parameter="method" scope="request" validate="true">
     <forward name="success" path="orgSearchDef"></forward>
     <forward name="failure" path="loginLandingDef"/>
     </action>
<action path="/organization" type="org.springframework.web.struts.DelegatingActionProxy"
          name="updateOrganizationForm" parameter="method" scope="request" validate="false">
     <set-property property="secure" value="false"/>
          <forward name="success" path="orgInputDef" />
          <forward name="failure" path="loginLandingDef" />
</action>
<action path="/loadOrganizations" type="org.springframework.web.struts.DelegatingActionProxy"
          name="searchOrganizationForm" parameter="method" scope="request" validate="true">
     <forward name="success" path="orgIndexDef" />
          <forward name="failure" path="loginLandingDef" />
</action>
<action path="/updateOrganization" type="org.springframework.web.struts.DelegatingActionProxy"
          name="updateOrganizationForm" parameter="method" scope="request" input="orgInputDef" validate="true">
               <forward name="success" path="/loadOrganizations.do?method=loadOrganizations"></forward>
               <forward name="failure" path="/organization.do?method=createOrUpdateOrganization"/>
          </action>
          <action path="/exportOrganization" type="org.springframework.web.struts.DelegatingActionProxy"
          name="exportOrganizationForm" parameter="method" scope="request" >
          <forward name="failure" path="loginLandingDef" />
</action>
     </action-mappings>
     
     <controller>
          <set-property property="processorClass" value="com.harcourt.supportportal.struts.common.action.SupportPortalRequestProcessor" />
     </controller>
     
     <message-resources parameter="com.harcourt.supportportal.resources.ApplicationResources" />
     
<plug-in className="com.harcourt.supportportal.tiles.SupportPortalSecureTilesPlugin">
     <set-property property="definitions-config" value="/WEB-INF/tiles-def/tiles-defs.xml" />
     <set-property property="httpPort" value="80"/>
<set-property property="httpsPort" value="80"/>
<set-property property="enable" value="false"/>
<set-property property="addSession" value="false"/>
</plug-in>
     
     <plug-in className="org.springframework.web.struts.ContextLoaderPlugIn">
     <set-property property="contextConfigLocation" value="/WEB-INF/spring-config/spring-config.xml"/>
     </plug-in>
</struts-config>

If your EAR has actually started, try this:
http://publib.boulder.ibm.com/infocenter/wasinfo/v6r0/index.jsp?topic=/com.ibm.websphere.zseries.doc/info/zseries/ae/xrun_jvm_sendredirect.html
If you are not on z/OS, the link is actually under server->server infrastructure->Java and process management->environment entries
for setting the property

Possible to switch from Apache to IIS for 9.3.1 BI+ products?

I need to see if it's possible to 'convert' my 9.3.1 Hyperion BI+ tools to run on IIS instead of Apache, or how hard/tricky it is.
1) Anyone ever switched web servers? Can it be done without uninstalling & reinstalling all the BI+ products?
2) what are the pitfalls?
3) Will SS re-register with it smoothly or would I have to set all security & provisioning up from scratch?
4) how to connect Tomcat back up to IIS?
5) The Financial Reporting (reports plus books/batches), Web Analysis and Interactive Reporting documents, scheduled BQY jobs, and Workspace itself would continue to function normally once IIS is in use right? or do things have to be re-imported or something?
6) The default port would be different right? does that cause any issues given this is an existing production enviro? Do i have to change the port in several places or does some re-register wizard take care of it??
I've had Tomcat/Apache in production for over a year so before attempting this cutover I'd llike an idea of what I'm up against to make sure it's even possible.
Thanks!
Karen

I'm switching them solely to have a better shot at implementing true single sign-on to where it'll pass the PC user's MS AD login ID to all the Hyperion products. With all my questions above I may have given the impression I was also moving off Tomcat, I am not. Was just being overly cautious to make sure my bases were covered. We're still using Tomcat so as I understand it, Web Analysis should still be okay..right?
Pleasantly surprised that Support was able to tell me how to switch web servers, it was simple and it worked for Workspace (but I can't get Web Analysis working yet now that I tried to implement SSO at the same time):
"As long as the IIS is on the same box as where you are using for Apache HTTP, then the simplest thing to do is to shutdown Apache, change the Port of IIS to 19000. Restart IIS, then run the configure Web Server component of the config tool, selecting IIS."
To change the port of IIS6:
Microsoft Internet Information Services versions 4.0 to 6.0
1.     Open Internet Service Manager or Internet Information Services (IIS) Manager.
2.     If necessary, expand the Web server that you want, and then expand Web Sites.
3.     Right-click the Web site that you want to change.
4.     Click Properties.
5.     Click the Web Site tab.
6.     Change the TCP Port Number in the TCP Port edit box (or click Advanced for multiple Port settings).
7.     Click OK to save the changes.
I now have Workspace working to where it does NOT prompt for a login ID, it works nicely & transparently running on IIS. Web analysis however literally produces a login popup box, the title of the window is the Web analysis server name. Can't figure it out so I opened an SR to hopefully get some assistance. Unfortunately I forgot to test WA after switching to IIS, I went ahead and configured for transparent login too before trying WA so I'm not sure which is causing the login popup box but since I can't get past the login box WA throws up a "you are not authorized to view this page" page.
Ever done this? should it work? that is, WA running on IIS/Tomcat; and also WA working after following the IIS/Tomcat Transparent Login instructions provided by Support - they've been floating around for a while so I assume you've seen them...?
Thanks,
Karen

ERROR: user is not configured for keystore 'service_ssl'

hi experts:
System environment:
pi7.0 j2ee sp09
ECC6.0 patch level11
Here is my scenarios..
ECC6.0-->(IDOC)XI(CIDX)--
>External system.
External system-->(CIDX)XI(IDOC)--
>ECC6.0
1.we have got there certificates from external system (rootCA.DER,intermedia.DER,Server.DER), imported the 3 certs files to TrustedCAs view using VA tool after we configured the SSL enable.
2.We generated the CSR file and got the response from CA. we import the CSR response to SERVICE_SSL service
3.I have assigned the role(keystoreadministrator) to user(PIAFUSER,PIAPPLUSER) in security provide service.
4.I configured the IR and ID for the first sceniro. I Selected the "service_ssl" view and "TrustedCAs" view in received agreement in ID, and selected the "service_ssl" view in comunication channeland. actived all of them.
issue :
as soon I trigger the message to external. It is OK in monitor for processed XML Message.
BUT I got the error message in runtime workbench/adapter engine/communication channel mornitoring.
Channel Name: Buyer_Send_OrderChange
Receiver Agreement: |com_sap_abap_r3_200|Sell_elemic|CIDX_E45_20_seller|OrderChange
Security Settings > Current certificate configured for signing:
ERROR: user is not configured for keystore 'service_ssl'
Security Settings > Partner certificate configured for signing:
ERROR: user is not configured for keystore 'TrustedCAs'
Thanks!!.

The question have been solved ..
thanks!
xixi

Configuration for Transaction Management

          Hi,
          I am working with Weblogic Server SP1. I am facing a problem in configuring for
          Transaction Management.
          I have a session EJB say SEJB and two entity EJB say EEJB1 and EEJB2. EEJB1 is
          for the parent table
          and EEJB2 is for the child table.
          I have two records in the database REC1 and REC2.
          REC2 has dependencies and cannot be deleted, while REC1 can be deleted.
          In weblogic-ejb-jar.xml I have configured as follows:
          <weblogic-enterprise-bean>
          <ejb-name>SEJB</ejb-name>
          <stateless-session-descriptor>
          <pool>
          <max-beans-in-free-pool>300</max-beans-in-free-pool>
          <initial-beans-in-free-pool>150</initial-beans-in-free-pool>
          </pool>
          </stateless-session-descriptor>
          <reference-descriptor>
               <ejb-reference-description>
               <ejb-ref-name>EEJB</ejb-ref-name>
               <jndi-name>EEJBean</jndi-name>
               </ejb-reference-description>
               </reference-descriptor>
          <jndi-name>SEJBn</jndi-name>
          </weblogic-enterprise-bean>
          Further, in ejb-jar.xml I have set up the <trans-attribute> as RequiresNew for
          Session Bean while Supports
          for the EEJB. Something like this:...
          <container-transaction>
          <method>
          <ejb-name>SEJB</ejb-name>
          <method-intf>Remote</method-intf>
          <method-name>*</method-name>
          </method>
          <trans-attribute>RequiresNew</trans-attribute>
          </container-transaction>
          In spite of this setting, when, through the client, I am selecting the two records
          REC1 and REC2 at the same
          time and deleting them, REC1 gets deleted while REC2 does not and gives a TransactionRollbackException.
          Ideally, since both are part of a single transaction, both should have been rolled
          back.
          Please suggest if I am missing on some kind of configuration parameter or setting.
          I'll be more than
          happy to provide some more details to get the problem solved.
          I can also be reached at [email protected]
          Thanks in advance,
          Regards,
          Rishi


TCode: SWF5
Enterprise_Extensions:
-> EA-FS
Enterprise_Business_Functions:
-> FIN_TRM*
Rg
Lorenz

Enable the security configuration for this panel

Why do my panels built with Configurator sometimes display
this in Ps Cs4?
"Please close all panels or restart Photoshop to enable the
security configuration for this panel"
Closing panels or restarting Photoshop does not enable the
panels but exporting from Configurator does enable them. Why do I
have to keep exporting?

I believe I have stumbled on the answer to this problem, so I
would like to pass it along to any other users who have a similar
problem.
My experience is that this is an intermittent problem, so I
asked myself what do I do from time to time that could be causing
this difficulty. The answer is I use a program called CC cleaner to
clean out temporary files (that in theory I don't need). I found
that after running CC cleaner, I have to re-export the
configuration file (as I get the error message described in an
earlier posting) so that the configurator panel subsequently opens
properly when I open up C S 4.
I immediately ran CC cleaner again and found that it wanted
to delete only one group of files that were located in the
following folder:
C:\Documents and settings\user's name\application
data\Macromedia\flash player\*.*
Accordingly, I instructed " CC cleaner", to exclude this
folder and everything in it (from deletion):
Now if I run CC cleaner to get rid of all my temporary
Internet files and other temporary files, but it leaves the above
folder untouched, and so far the configurator panel opens up
properly in Photoshop.
I don't use Windows "disk cleaner" so I'm not sure whether or
not this cleaner represents a potential problem. In any event it's
the Macromedia folder described above that causes the problem.
It's clear that Adobe configurator uses Macromedia flash to
do its thing, so hopefully I've solve this problem
long-term.

Error NO_RESOURCES when using Apache Plug-in for Weblogic

Hi all,
LoadModule weblogic_module modules/mod_wl.so
   OS.....: OEL 6.3 64 bits
   Weblogic Server: 12.1.0.2 (192.168.0.123)
   Apache: Apache/2.2.15 (Unix) (192.168.0.149)
   I am trying to configure the Apache Plug-in to forward the requests to the Weblogic Server. I already did all the configuration, but when i try to access a page, i get the following error in Apache's error.log:
[Wed Dec 03 18:25:42 2014] [error] [client 192.168.0.149] <649114176419322> weblogic: *******Exception type [NO_RESOURCES] (apr_socket_connect call failed with error=13, host=192.168.0.123, port=7006 ) raised at line 1682 of URL.cpp
[Wed Dec 03 18:25:42 2014] [error] [client 192.168.0.149] weblogic: Trying GET /benefits/ at backend host '192.168.0.123/7006; got exception 'NO_RESOURCES: [os error=13, line 1682 of URL.cpp]: apr_socket_connect call failed with error=13, host=192.168.0.123, port=7006 '
[Wed Dec 03 18:25:44 2014] [error] [client 192.168.0.149] <649114176419322> weblogic: request [/benefits/] did NOT process successfully..................
   My httpd.conf if configured as follows:
Listen 8080
LoadModule weblogic_module modules/mod_wl.so
<IfModule mod_weblogic.c>
   WeblogicHost 192.168.0.123
   WeblogicPort 7006
</IfModule>
<Location /benefits>
   SetHandler weblogic-handler
</Location>
When i try to access the app deployed in Weblogic with the following address: "http://192.168.0.149:8080/benefits/" , i get the error mentioned above and the following error is displayed in my browser:
   Failure of Web Server bridge:
   No backend server available for connection: timed out after 10 seconds or idempotent set to OFF or method not idempotent.
What am i doing wrong?
Thanks in advance.

Hi all,
I had some progress... i disabled the firewall (SELinux) on the Apache server. Before, i had just disabled the firewall from the Weblogic Server. Now, when i access the apache server, it redirects (sometimes, actually) the request to my Weblogic Cluster. Let's say that 50% of the time it works and the other 50% i get the error informed previously.
   I am using the apache user and the ulimit of this user is:
      [apache@vm-apache conf]$ ulimit -a
core file size          (blocks, -c) 0
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 15915
max locked memory       (kbytes, -l) 64
max memory size         (kbytes, -m) unlimited
open files                      (-n) 1024
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) 8192
cpu time               (seconds, -t) unlimited
max user processes              (-u) 1024
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited
   From the Apache server (192.168.0.149), when i execute the "culr" command, i get the following message:
      [apache@vm-apache conf]$ curl http://192.168.0.123:7006/benefits
      <html><head><title>302 Moved Temporarily</title></head>
      <body bgcolor="#FFFFFF">
      <p>This document you requested has moved temporarily.</p>
      <p>It's now at <a href="http://192.168.0.123:7006/benefits/">http://192.168.0.123:7006/benefits/</a>.</p>
      </body></html>
   The message above represents a OK situation or a problematic one?
   Below you can see the last few lines of my Error Log and Access Log:
   ### error log ###
[Thu Dec 18 20:54:16 2014] [error] [client 192.168.0.123] <340514189468553> weblogic: parseJVMID: could not resolve hostname '-1062731653'. Returning NULL from parseJVMID
[Thu Dec 18 20:54:16 2014] [error] [client 192.168.0.123] <340314189468563> weblogic: parseJVMID: could not resolve hostname '-1062731653'. Returning NULL from parseJVMID
[Thu Dec 18 20:54:17 2014] [error] [client 192.168.0.123] File does not exist: /var/www/html/favicon.ico
[Thu Dec 18 20:54:17 2014] [error] [client 192.168.0.123] File does not exist: /var/www/html/favicon.ico
[Thu Dec 18 20:54:21 2014] [error] [client 192.168.0.123] <340114189468603> weblogic: parseJVMID: could not resolve hostname '-1062731653'. Returning NULL from parseJVMID, referer: http://192.168.0.149:8080/benefits/
[Thu Dec 18 20:54:44 2014] [error] [client 192.168.0.149] <339814189468792> weblogic: parseJVMID: could not resolve hostname '-1062731653'. Returning NULL from parseJVMID
[Thu Dec 18 20:54:44 2014] [error] [client 192.168.0.149] <339814189468792> weblogic: initJVMID: parseClusterServerList failure
[Thu Dec 18 20:54:45 2014] [error] [client 192.168.0.123] <339914189468844> weblogic: parseJVMID: could not resolve hostname '-1062731653'. Returning NULL from parseJVMID, referer: http://192.168.0.149:8080/benefits/servlet
[Thu Dec 18 20:54:45 2014] [error] [client 192.168.0.123] <339914189468844> weblogic: initJVMID: parseClusterServerList failure, referer: http://192.168.0.149:8080/benefits/servlet
[Thu Dec 18 20:54:56 2014] [error] [client 192.168.0.149] <339814189468792> weblogic: request [/benefits/welcome.html] did NOT process successfully..................
[Thu Dec 18 20:54:57 2014] [error] [client 192.168.0.123] <339914189468844> weblogic: request [/benefits/welcome.html] did NOT process successfully.................., referer:http://192.168.0.149:8080/benefits/servlet
   ### access log ###
192.168.0.123 - - [18/Dec/2014:20:54:15 -0300] "GET /benefits HTTP/1.1" 302 267 "-" "Mozilla/5.0 (X11; Linux x86_64; rv:10.0.5) Gecko/20120605 Firefox/10.0.5"
192.168.0.123 - - [18/Dec/2014:20:54:16 -0300] "GET /benefits/ HTTP/1.1" 200 5832 "-" "Mozilla/5.0 (X11; Linux x86_64; rv:10.0.5) Gecko/20120605 Firefox/10.0.5"
192.168.0.123 - - [18/Dec/2014:20:54:17 -0300] "GET /favicon.ico HTTP/1.1" 404 290 "-" "Mozilla/5.0 (X11; Linux x86_64; rv:10.0.5) Gecko/20120605 Firefox/10.0.5"
192.168.0.123 - - [18/Dec/2014:20:54:17 -0300] "GET /favicon.ico HTTP/1.1" 404 290 "-" "Mozilla/5.0 (X11; Linux x86_64; rv:10.0.5) Gecko/20120605 Firefox/10.0.5"
192.168.0.123 - - [18/Dec/2014:20:54:20 -0300] "POST /benefits/servlet HTTP/1.1" 200 492 "http://192.168.0.149:8080/benefits/" "Mozilla/5.0 (X11; Linux x86_64; rv:10.0.5) Gecko/20120605 Firefox/10.0.5"
192.168.0.149 - - [18/Dec/2014:20:54:39 -0300] "GET /benefits/welcome.html HTTP/1.1" 503 250 "-" "Mozilla/5.0 (X11; Linux x86_64; rv:10.0.5) Gecko/20120605 Firefox/10.0.5"
192.168.0.123 - - [18/Dec/2014:20:54:44 -0300] "GET /benefits/welcome.html HTTP/1.1" 503 250 "http://192.168.0.149:8080/benefits/servlet" "Mozilla/5.0 (X11; Linux x86_64; rv:10.0.5) Gecko/20120605 Firefox/10.0.5"
Is there any additional or recommended configuration for this solution to work properly?
Thanks again for the attention and pacience.

SP A10-Error 633: The modem is not installed or configured for Dial-Up

Ive already reformatted the hard drive and used the utilities CD to install the modem driver again. Anyone got any advice on how to solve problem? Would an external modem solve it?
By the way it is a satellite pro A10

Hello
If the HDD is formatted use the recovery CD and reinstall OS. After that the modem should be recognized and installed properly. After that configure Dial up connection and check the modem. If the modem is not defective it should work.
The strange thing is that there is error 633 that means: The port is already in use or is not configured for Remote Access dialout.
Please check this interesting site http://www.modemsite.com/56k/duns633.asp .
If there is no success please write again.
Bye

Can E51 email key be configured for SMS text inste...

can E51 email key be configured for SMS text instead of email?
Like I just want to be able to press the email key to get to sms messages as I use text a lot but never use email on my phone at all.
Thanks,
Andy.
Solved!
Go to Solution.

hi andy..
yes you can.. and i'm already doing that in my E51
just go to settings --> personalisation then change it
and please let me know
Phones I bought from 1st till now:
3210 / 3310 / 3410 / 6310 / 6600 / 6020 / N72 / E51 / X2-00 / 5310 xpress Music / E90 Communicator
If you like my post or it helped you, Give me Kodo

Apache's configuration for Bugzilla [Solved]

Similar Messages

Maybe you are looking for