APD creation on non cumulative

Hi,
what is procedure for APD creation on non cumulative. pls help me how to create the APD.
Thanks in advance..
Thanks
Madan S

Hi Madan,
I dont think that you can directly access the non cumulative info provider even you try to access through the APD. So you better 1st create Bex query based on that info provider. (Ex : 0IC_C03 Info cube)
then access that query from the APD as a source
Please refer this for more understanding:
Step by step Analysis Process Design
you can add many data source like this and connect those results of the data sources through connection.
here you can do any transformation available on APD.
and finally drag a data target to load the final result of your transformation
hope this will help for you.
Regards
Venura

Similar Messages

KF creation - Non-cumulative value with NCUM value change - option

What is the use above option in the KF creation?
Thanks

Hi,
A non-cumulative is a non-aggregating key figure on the level of one or more objects, which is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory.
If you use non-cumulative key figures, an absolute non-cumulative value (the marker) and all non-cumulative value changes are saved in the fact table of the InfoCube. In this way, the retention and volume of data in the data loading process is optimized. A data record is then only loaded to the InfoCube if a non-cumulative changes because of a transaction. Non-cumulatives can then be evaluated at any time in queries, using non-cumulative key figures.
Pls chk this links;
http://sap.seo-gym.com/inventory.pdf
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Reagrds
CSM Reddy

BAPI - Issue in fetching non-cumulative KF for Inventory

Hello All,
Would kindly require ur help urgently on the issue mentioned below:
We require the non-cumulative KF '0TOTALSTOCK' in the BW side for further processing. Now we are using BAPI to get the query executed and store the results in a table, so that we can fetch the value from the table.
The issue occuring is, if the Reciept Total Stock and the Issue Total Stock are same which means 0TOTALSTOCK will be '0', this gets stored in the table, but when the the values for Reciept Total Stock and Issue Total Stock are not same, the job for query execution fails giving NO ERROR.
Kindly share ur views on it, since it is critical.
Thank you.
PS: Transaction used for BAPI is RSCRM_BAPI, authorization is not an issue, query contains no formulas, and have performed basic checks with respect to BAPI query execution.
Regards,
Kunal Gandhi

Hi Kunal,
Check this links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b06c3f96-ed4f-2a10-1693-f2c76a39988f
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90886731-21e4-2a10-2ebf-901c2c2b4e3d
Basically, what you do is:
- Define a source: in your case will be a query.
- Define a target: you'll need to create a transactional DSO to save information.
- Connect both: you can simply assign fields if the query is just what you need to download, or you can have routines.
Transaction for creating APD is RSANWB. It's pretty easy and it's a graphical interface, so you should find your way easily.
Hope this helps.
Regards,
Diego

Exporting Non-Cumulative KF to Cumulative

We wish to export Inventory data from BW to a CSV file through Open Hub.
The catch is that we have a Non-Cumulative KF with InFlow & OutFlow whose value needs to be exported as well @ the month summary level. Hence was wondering if there is any specific transformation thats possible to achieve this.
Regards
Anujit Ghosh

We have 4 Cubes holding Inventory Line Item data.
Some of the Cubes have Non-Cumulative KFs.
We are planning to have a Summary Cube and load data from the 4 above mentioned cubes before exporting the data through Open Hub.
I don't have much knowledge on APD so wanted to know if its possible to load the summarised data into another cube using APD or APD itself will store the data physically which can be used.
If you have any relevant documents that would be helpful.
Regards
Anujit Ghosh

Multiprovider containing non-cumulative KF and cumulative KF

I have two infocubes that I have placed in a multiprovidor. Infocube #1 contains one non-cumulative key figure and some cumulative key figures. Infocube #2 contains all cumulative key figures. When running a query against the multiprovider, all key figures (from both infocubes) are displayed except for the non-cumulative key from Infocube #1, in which case the value is blanks. Is there something I am missing?

Yes SAP has defined some Restriction for Creation of MultiProvider for Non Cummulatived Key Figures.
"MultiProviders
When the reporting scenario is to be extended, use a MultiProvider as central interface between
query definition and basic InfoProviders. When another InfoProvider is added to the MultiProvider
definition, the technical name of a query based on the MultiProvider remains unchanged.
Use a MultiProvider to reduce the size of the basic InfoProviders. Advantages: parallel access to
underlying basic InfoProviders, load balancing, resource utilization, query pruning.
Make sure that your MultiProvider only retrieves data from relevant basic InfoProviders at query
runtime by
o Using constants in the design of the basic InfoProviders
o Using different key figures in the design of the basic InfoProviders
o Using characteristic 0INFOPROV when designing a query on the MultiProvider
Are you planning to use a MultiProvider? If so, you have to ensure that the characteristics you want
to report exist in all basic InfoProviders.
Do not use more than one non-cumulative InfoCube (InfoCube with at least one non-cumulative key
figure) because this could lead to incorrect query results.
Do not use calculations before aggregation on MultiProvider because this may lead to wrong query
results.
Do not combine basic InfoProviders having inhomogeneous data models in a MultiProvider. Use the
report-report interface between queries defined on the basic InfoProvider instead.
Avoid using only parts of compound characteristics in the constituent basic InfoProvider of a
MultiProvider. For more information, see SAP note 702542."
RefS: How to Do Docs

Non-cumulative Values not showing in Inventory Management Queries

Hi:
Has anyone had a problem with the new version and Non-cumulative key figures not showing up in Bex for Inventory Managemet reports? Specifically, they showed and validated back to ECC for our Development and QA boxes but now in our Regression box they are all showing zeros. Our Cumulative values are all showing correctly still within the Regression box. For example, Total Receipts and Total Issues are correctly poplating values but Total Stock is not.
I have checked and validate that the configuration in the Regression box matches or Dev and QA box.

Found the problem. It had to do with the compression variant in the delta process chain. The compression was set to 'no marker update'. Since we only started receiving measureable deltas in or regression box this is where the incorrect setting showed up. Reinitalized and the deltas are working correctly now.

Aggregates on Non-cumulative InfoCubes, stock key figures, stock, stocks,

Hi..Guru's
Please let me know if anybody has created aggregates on Non-Cumulative Cubes or key figure (i.e. 0IC_C03 Inventory Management.)
I am facing the problem of performance related at the time of execution of query in 0IC_C03.( runtime dump )
I have tried lot on to create aggregate by using proposal from query and other options. But its not working or using that aggr by query.
Can somebody tell me about any sample aggr. which they are using on 0ic_c03.
Or any tool to get better performance to execute query of the said cube.
One more clarification req that what is Move the Marker pointer for stock calculation. I have compressed only two inital data loading req. should I compress the all req in cube (Regularly)
If so there would be any option to get req compress automatically after successfully load in data target.
We are using all three data sources 2lis_03_bx,bf & um for the same.
Regards,
Navin

Hi,
Definately the compression has lot of effect on the quey execution time for Inventory cubes than other cumulated cubes.
So Do compression reqularly, once you feel that the deletion of request is not needed any more.
And ,If the query do not has calday characterstic and need only month characterstic ,use Snap shot Info cube(which is mentioned and procedure is given in How to paper) and divert the month wise(and higher granularity on time characterstic ,like quarter & year) queries to this cube.
And, the percentage of improvement in qury execution time in case of aggregates is less for non cumulated cubes when compared to other normal(cumulated) cubes. But still there is improvement in using aggregates.
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Transformation between DS and DSO missing Non-cumulative KYF

Hi SDN,
I installed the business content for CML, and am working with 0CML_DELTA_CAP datasource. I would like to create a transformation between this datasource and DSO 0CML_O03.
By default, when you install the CML business content, the datasources use the 3.x dataflow concept (transfer rules, infosources, and update rules).
I would like to use the 7.x dataflow concept and created a transformation between the 0CML_DELTA_CAP datasource and the 0CML_O03 DSO. In the transformation, it is missing the fields 0CML_B330, 0CML_B340, 0CML_B360, 0CML_B380 in the datatarget. These key figures are non-cumulative with NCum Value change (0CML_B330 uses 0CML_B331 as value change). The value change key figures show up in the transformation, but the non-culmulative key figures do not.
Does anyone have any ideas why the non-cuml. kyf are not showing up in the transformation?
Thanks,

Hi Brendon,
The non- cumulative key figures are not mapped in the transformation. Only the 'Inflow' and 'Outflow' key figures for the non- cumulative key figure are mapped.
You can check the property for the non- *** KF in RSD1, where you would find the corresponding inflow and outflow kf. If both of these are mapped in the transformation, the non- *** kf would calculate the value in the report in which it is included as:
Non-*** KF value = Inflow value - Outflow value.
Hope this helps.
Regards,
Abhishek.

More than Non-cumulative cubes in one MultiProvider

Hi There,
I have got two non cumulative cubes and want to build a MultiProvider on them.
Got information at couple of places on help.sap.com at one place it says MultiProvider can have more than one non-cumulative cubes at other place it says it can't. What is the right suggestion?
Thanks
Vikash

Hi,
From the performance perspective you should not use more than one Non Cumulative Infocube in a Multi Provider. If you user more than one the query will not execute parallel and execute in sequential which leads to delay in query run time.
This is a recommendation from SAP not to use morethan one Non Cumulative Cubes in a MP.
Cheers

Purpose of Non Cumulative key figures

Whatu2019s the purpose of Non Cumulative key figures?

Hi....
There is an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
Also Check..........
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8dfe6-fe1c-2a10-e8bd-c7acc921f366
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/frameset.htm
Re: Non-Cumulative keyfigure example
Hope this helps.....
Regards,
Debjani........
Edited by: Debjani Mukherjee on Oct 27, 2008 3:46 AM

Error in query due to exc aggregation with non-cumulative KF

Hi All,
when i am trying to execute a query I am getting the following errors.
SAPLRRI2 and form RTIME_FUELLEN_06-01-
Program error in class SAPMSSY1 method: UNCAUGHT _ESCEPTION.
I have calculated KF of non-cumulative KF. If I delete the calculated the query is ok.
I am working on BI 7.Did anybody got this error? any idea?
I have implemented notes 976550 and 991563
Thank you

Hi,
Any one with any suggestions?
Mohammed

Problem with Non-cumulative key figure.

Hi all,
I am facing the problem with the Non-cumulative Key Figure (Quantity). I have created and loaded data to the non-cumulative InfoCube. This cube is defined by me to test the non-cumulative key figure.
In BEx query the non-cumulative key figure and cumulative key figure (Value change) both display same values, i.e. non-cumulative key figure contains the same values which we have loaded for cumulative value change. Non-cumulative key figure is not calculated based on associated cumulative key figure.
I have done the following while defining the non-cumulative InfoCube:
1. Created a non-cumulative key figure which is associated with a cumulative key figure (value change).
2. Loaded data to non-cumulative InfoCube from flat file.
3. Compressed data in non-cumulative InfoCube after the load.
Note:
1. Validity area is determined by the system based on the minimum and maximum date in data.
2. Validity determining characteristic, 0CALDAY is the default characteristic selected by the system.
Is there any other settings to be done?
Please help me in resolving this issue.
Thanks and regards
Pruthvi R

Being a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra

Non cumulative infocube without BX

Hi Experts,
I need to compress and create aggregates for the inventory cube (Has Non cumulative in/out flow KFs)
We do not use BX as all of the initial stock levels are defined using movements. Does this change anything?
Which way is it as I have seen both answers posted in this forum?
BF-init: Compression without marker update
BF-delta: Compression WITH marker update
OR
BF-init: Compression without marker update
BF-delta: Compression WITHOUT marker update
Thanks,
Chris

If you are not bringing BX, all BF should be compressed with marker update.

Non-Cumulative Key figure with inflow & outflow

I am using some non-cumulative key figure in our inventory cube, however, I could not find the non-cumulative field in E or F table of the cube?
Is there a separate table to hold the reference unit. If so, what is the table name.
Thanks.

Hi,
Go to t-code RSDV and enter the tech.name of your cube that has the non-***. key figure and you will see a validity table. This is only thing I know that will make you look at validity table.
The unit for the Non-*** KF will be the same unit as its inflow and outlow parameters' unit.
Thats my 2 cents on the matter.
Reddy

Queires on Non-Cumulative Inventory Management Cube 0IC_C03 Not Working

Hello all.
I am trying to use the 0IC_C03 Inventory Management cube with non-cumulative key figures. I followed the How to...Handle Inventory Management Scenarios in BW paper to a tee.
Steps I followed:
1. Ran initialization of beginning balance with 2LIS_03_BX
2. Ran the historical job with 2LIS_03_BF
3. Uploaded to BW the Initialization (BX) and compressed without setting the "No Marker Update" flag
4. Uploaded the historical movements (BF) and compressed setting the "No Marker Update" flag
Now, to this point, everything was fine. Quantities were as expected. Dollar values were as expected. The problem occurs once I load deltas:
5. Loaded delta for 2LIS_03_BF and compressed without setting the "No Marker Update" flag as instructed in the How To... paper
Query example:
MATERIALA:
Initial Stock Balance = 1000 EA
Delta had stock issue of 150 EA (so the stock balance should have decreased from 1000 to 850)
Now, I have the record in BW showing the stock issue of 150. However, the non-cumulative key figure within the query still shows 1000. And when I drill down by calendar day, I would expect the result to show 850, but it seems to add the 150 before taking it away resulting in 1000 which is actually the initial stock balance. It is like it is not recognizing the updates.
Any help would be appreciated.
Thanks,
Brent

Hi!
Here is what helped in my case, very similar to your:
In DTP for 2lis_03_bx (not only in infopackage, as it is said in manual!) you have to change "Extraction Mode" parameter to "Initial Non-cumulative for Non-cumulative values"

APD creation on non cumulative

Similar Messages

Maybe you are looking for