Aperture 3.2.4 flagged pics in Project not showing in Flagged view

I have used Aperture 3.2.4 flagging many times as a method to create batches of pics for emailing. Tonight I have flagged 6 pics. I can see the flag on each pic, deselect and reselect each flag, but in the "Flagged" view I am not seeing any pictures. In browser, in the list view, the pictures are showing as flagged.
Any ideas? Thanks, Bruce

It is possible that you have a filter set on the flagged album. When the flagged album is selected with browser view on look in the upper right hand corner of the screen the window should say unrated or better.
If that is not the case what happens when you hold the mouse over the flagged album in the Library pane of the Inspector. Does it report any versions in the album?
Finally take a look at this User Tip Images not appearing in browser, search filter is cleared The same problem this tip addresses with the Photos section of the Library also applies to the Flagged album. See if this doesn;t clear it up if the above fail.
And of course the steps shown in Aperture 3: Troubleshooting Basics will also be helpful.
Post back if you still have problems.

Similar Messages

Visual Studio Projects Not Showing FileVesion Leading Zeroes in File Properties

I created a simple Visual Studio 2013 windows form application setting the AssemblyInfo.cs file as show below.
// You can specify all the values or you can default the Build and Revision Numbers
// by using the '*' as shown below:
// [assembly: AssemblyVersion("1.0.*")]
[assembly: AssemblyVersion("1.0.0.0227")]
[assembly: AssemblyFileVersion("1.0.0.0227")]
[assembly: AssemblyInformationalVersion("0.0.0.0227")]
I built the application and went to the Windows File Explorer and brought up the file properties. What I see is that the product version showing the leading zeros, but the file version field does not show the leading zeros.
It appears to be a bug either with Visual Studio or with Windows. Which one is it and is there a fix?

Hi Sarah,
We can't see the screenshot. Do you mean you use Windows Explorer to browse to the AssemblyInfo.cs file and check the property?
If you change the product version or the file version from the AssemblyInfo.cs file, you need to firstly rebuild the assembly, then if you go to the debug/release folder, check the property of the assembly file, the Details tab will show you the corresponding
changes of these properties. It's the assembly property but not the cs file property.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

All images in Project not showing up

I have 2000 images in a project but for some reason I can only get one subset of them [89 images] to show up. I have checked to show all, I've gone into smart albums and they all show up but only 89 show up when I want to open the entire project...This is true in the maximized viewer and also in list view. I deleted the plist and reopened and it's still happening. I wanted to avoid a full rebuild of the Library [not sure how to rebuild only a project] if possible. I just want to be able to see and work with all my 2000 images in that project, not just the subset. Thanks.

Hello, Victoria
Quote: "I have 2000 images in a project but for some reason I can only get one subset of them [89 images] to show up. I have checked to show all, I've gone into smart albums and they all show up but only 89 show up when I want to open the entire project..."
What firstlaunch said and also did you make any Folders within a Folder? If so the other photos will not show up by design because a Folder within a Folder will force a separation of the images — this is a good thing because sometimes you may not want clients to see what other clients have within projects/jobs.
victor

Projects not showing up in Project Library

I can add projects to FCX.
However, they aren't showing up in the Project Library.
I have one project that shows up. When I click on on that I can access the other projects with an arrow button in the left hand corner.
I would like to be able to see all of my projects in the Project Library.
Did I accidentally press something and turn off this view?
Evan Jacobs

I think I might've fixed this.
Restarted FCX and it they are all showing up now.
Evan

Projects not showing up in 10.1!!!

Recently updated to 10.1, was all ok yesterday but the organisation was all messed up. Today I was going to manually fix it. Opened the App and my Projects would not show! Events show up but under the Updated Projects Tab nothing comes up. I checked in the Liabries folder on my drive, show package contents etc. There are two folders I can see to do with Projects. One is called Updated Projects which has Render Files in. Another called Updated Projects 1. This has all my project information in it. All the folders containing the information for my projects. So why is Final Cut not reading it? The only thing I can think of that I've dont is copy the libaries file to another external drive as a backup. I still have the old Final Cut folders from the preveious version. Is Final Cut not locating the files propaly? Really annoying as I want to get on and edit! Thanks for your help- Ben

*Sorry the only thing that I can think of that I've 'done' (not dont)

Video in project not showing

i have a completed project that shut down while sharing due to the battery running down. Since then he video will not show in the window. it is in the project window and I can hear the audio but not video. Any ideas what is going on? Did i hit a button or is it buggy because of the interruption during the export?

when you publish a project, other files that you did place manual in the folder ( like video files), don't get inside the published files, you have to copy the video from the source files to the published files

Planning project not showing in shared services and planning app wizard

I installed planning ver 9.3.1 and now when want to create a planning application, the 'planning' option is not showing in app wizard. It is also not showing in shared services project list. Can you please guide...
Thanks & Regards.

Thanks for the reply. I can login to planning AppWizard but when want to create a planning application, in the drop down of shared services project, the 'planning' option is not coming.
As I have installed planning afresh, so right now no planning application I have in my computer. so, no meaning to login to http://localhost:8300/HyperionPlanning/ because it is showing 'no application'.
Please revert back for any clarifications.
Thanks & Regards.

RoboHelp Server 8.x - Project not showing

We publish our project from RoboHelp HTML as a FlashPro to our RoboHelp Server, everything seems to go OK. But the project does not appear in the Admin web site for listing solutions. This is the only project, no merging and we are choosing to load to a secured area called "production". Physically on ther server you can see the files copied up and you can manually point to the file through the browser. But if you try to load the project by calling the server http://<myServer>/robohelp/server?prj=test&area=production
The project will not show? Any ideas on what to check? We have eliminated all special characters in the file names, no spaces in file names.
Is there a way to manually load the information? Is there any logs or events that I should check? Is there a limit to the naming size for files or directories?
Any infomation would be appreciated...
Thanks

I see alot
of Publishing calls and I am showing that last few and then the final call to the server
- - [06/May/2010:15:58:15 -0400] "POST /robohelp/server?PUBLISH HTTP/1.1" 200 60
- - [06/May/2010:15:58:15 -0400] "POST /robohelp/server?PUBLISH HTTP/1.1" 200 60
- - [06/May/2010:15:58:17 -0400] "POST /robohelp/server?PUBLISH HTTP/1.1" 200 60
- - [06/May/2010:15:58:17 -0400] "POST /robohelp/server?PUBLISH HTTP/1.1" 200 60
- - [06/May/2010:15:58:17 -0400] "POST /robohelp/server?PUBLISH HTTP/1.1" 200 60
- - [06/May/2010:15:58:17 -0400] "POST /robohelp/server?PUBLISH HTTP/1.1" 200 64
- - [06/May/2010:15:58:18 -0400] "GET /robohelp/server?ver=8&mgr=sys&cmd=psh&area=production HTTP/1.1" 200 88
We have some files that have a - in the name and are working on cleaning them up

Remove from Project not showing

I am trying to remove some duplicate controls from a project - more specifically a class. Problem is the remove from project does not show up. Anyone seen this?

Hi rammer
Is the protection for the class set to public?
If you right-click on the class and select properties then you can see protection level. Also check that you have public permission under item settings for the individual items.
Also can you remove the class from the project and try to add the class again to see if this changes the behavior?
Regards
Anders

How to I set up PSE12 to be the external editor for Aperture - aperture is exporting the photos but they are not showing up in PSE

I want to use PSE12 as external editor for apetture . the photos are exportd but do not show up in PSE. Must be some adjustment I can't find?

The article below is for PSE 10, but should be relevant for PSE 12. I recently used the instructions for editing Aperture photos in PSE 11
http://barbarabrundage.com/2011/10/05/adobe-hide-and-seek-setting-pse-10-as-exte rnal-editor/

Compound clip imported into project not showing up in the event browser

I have learnt that when one imports any clip into the project from anywhere else other than its associated event folder, the new clip also gets automatically added into the event folder. I have seen this occur when I had imported audio from the music browser onto my timeline directly.
Today I happened to place a compound clip [a common template which I use for introduction to the video] onto the beginning of a project which I have started recently. I broke the compound clip apart and made the necessary edits. What puzzles me is that this compound clip has an audio clip and this clip was not being shown in the event browser. Is this normal?
Ps. I have very recently updated my FCPX from version 2 to 5.
DR.SOMANNA

Let me explain the matter in a different way...
I have made a compound clip of the intitial generator clip, titles and music clip which I had used for my first project. The intention to do so being that I could reuse the same for my future projects as well. I placed this compound clip in a new project which I named as templates.
When I had started upon a new project a few days ago, I copied and pasted this compound clip from the 'templates project' and added it to the beginning of the timeline of the new project.
Now, for purposes of editing the titles, I broke apart the compound clip and changed the text of the titles. Also, when I had ungrouped the compound clip, there did appear the music clip below the timeline. I know that clips imported from the generator browser and the titles that are added to the project do not show up in the events browser, but should not the audio clip make its appearance in the event browser? I know that when we add an audio from the music browser, this audio clip will be automatically shown in the event browser.
My question therefore is this: is an audio track that gets added to the timeline of a project via a compound clip that has been added and ungrouped on the timeline an exception to the rule?
Hope I have made myself clear.
DR.SOMANNA

New projects not showing (3.3.1)

When importing photos the project does not show anywhere, as importing starts it jumps to some random project (where the pictures are not being imported to). Trying to create a new project results in the same action.
As mentioned the new project does not show anywhere, not in the browser or in the Library (tree view).
This started happening after I updated to 3.3.1.
How can I fix this?

This seems to be in response to Thomas's good question. I hope he doesn't mind if I follow-up (I'm sure he's got the same questions).
ulriksen wrote:
It doesnt have a project path, trying to move the photos to a preexisting project doesnt work either...
What do mean? You can select an Image, and there is nothing shown in the metadata field "Project Path"?
What happens when you select Images and drag them to a Project that shows on the Library tab of the Inspector and drop them?

How to upgrade to aperture 3.5 when the app store does not show the update. I did buy aperture 3 on DVD not thru the app store. what to do?

I can not open aperture databases anymore as osx10.9 keeps telling me i have opened it with a newer version, which i have not but i understand from other discussions that thru the upgrade of iphoto osx automatically thinks that you have opened with aperture 3.5. the app store does not show me the update as i have not purchased the program thru the app store but on dvd. what to do?

If you are running MacOS X 10.9 and Aperture is installed in your Applications folder and simply called Aperture, not Apertre 3 or something, the AppStore should be showing you the update.
Have you already updated to Aperture 3.4.5 from the Support page Aperture 3.4.5?
Try to update manually to 3.4.5 and then reboot and sign again into the AppStore with your AppleID and look at the Update page.
For some forum members it helped to set the main system language to English U.S. to make the update finally show.
Léonie

Flagged photos in iPhoto not showing up in iMovie

I recently updated both imovie and iphoto. I have several flagged photos in iphoto. I am working in imovie to create a movie. When I cleck the camera on the lower right to import photos into imovie, I see all my photos. However, I don't see an option to choose the flagged photos. This has always been there. Incredibly annoying. I usually flag the pics I want to use in a movie.
I have tried closing and restarting both programs. Restarting computer. Removing all flags and reflagging some.
Still, I don't see that option to chose the flagged photos in imovie. I see all others like Events, Faces, Places, etc.
Thanks for any help.

Anyone have any ideas????
Again... I don't see the flagged photo smart album in imovie.... see screen shot below.
Where the flagged photo album should be (after Last Import)... it is not there!!
Very frustrating. Spent about 5 hours on and off with Apple support and they can't figure it out either.

How come my latest version of firefox does not show identification flags when the arrow or finger is on an item such as a link

using Internet Explorer or when using I.E. through AOL; when I place the cursor/arrow/finger over many links , PIX, buttons, etc. ... a flag comes up (much like the ones that ID a function on my desktop) that tells me what the link , PIC, etc. is.
When using Firefox that feature does not work... even on the same icon,link, etc. that works just fine without Firefox. I like these ID Flags and have grown to depend on them over the years. How can I implement this "ID flag" using Firefox.?

unfortunately the fiddler2 issuer in certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
<br><sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]]

Aperture 3.2.4 flagged pics in Project not showing in Flagged view

Similar Messages

Maybe you are looking for