Aperture 3 project does not display any images in one Project

This is a strange situation. The bullets below outline the situation:
The project does not display any images
When I place the pointer over the project it shows there are 500+ images
I have located the RAW images stored in my aperture library
I can pull up the images using a smart folder and searching for photos taken on the event day
This is happening only to one of my projects that I know of (weird!!)
I have tried to 're-add' the image by both importing and dragging and dropping into the project, neither works
I tried the following basics:
Fixed permissions
Rebuilt the database
Tried to re-import the data, but when I have the 'don't import duplicates' these are not an option
Found the images in my Aperture library
I created another project and drug all of the images into that project
Any idea how I can fix this?
My fear is that if I delete the original project, the original master images will be deleted.

The most common cause of this is some sort of stuff in the search box at the top of the browser that you don't expect to be there. Just clear it and all your images should show up.
RB
One note - if you drug your images from one project to another it moves them vs copies them unless you hold down the option key.

Similar Messages

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

Dreamweaver does not link any images or styling to my webpage

Hi,
I have been creating a webpage and have moved images from one folder to another and now the website will not display any images or styling. I have moved all the content back and it still doesn't show. I have created a completely new website with new images and styling and even now it still doesn't link the images to the "live view" (or when I open it in a browser). What have I messed up?
Thanks in advance.
Tom.

Thanks for you quick response - Please note that even if I use a template it doesn't show any image I put in. Can you see a problem with this template code? I have put the HTML and then the CSS after
PLEASE ALSO NOTE: I have completely re-done site management and moved images to where they should be. This has not worked.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<title>Untitled Document</title>



<link href="file:///C|/Users/admin/Desktop/tomstinhouse/twoColElsRtHdr.css" rel="stylesheet" type="text/css" />
</head>
<body class="twoColElsRtHdr">
<div id="container">
<div id="header">
    <h1>Header</h1>
</div>
<div id="sidebar1">
    <h3>sidebar1 Content</h3>
    <p>The background color on this div will only show for the length of the content. If you'd like a dividing line instead, place a border on the right side of the #mainContent div if the #mainContent div will always contain more content than the #sidebar1 div. </p>
    <p>Donec eu mi sed turpis feugiat feugiat. Integer turpis arcu, pellentesque eget, cursus et, fermentum ut, sapien. </p>
</div>
<div id="mainContent">
    <h1> Main Content </h1>
    <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Praesent aliquam, justo convallis luctus rutrum, erat nulla fermentum diam, at nonummy quam ante ac quam. Maecenas urna purus, fermentum id, molestie in, commodo porttitor, felis. Nam blandit quam ut lacus. </p>
    <p>Quisque ornare risus quis ligula. Phasellus tristique purus a augue condimentum adipiscing. Aenean sagittis. Etiam leo pede, rhoncus venenatis, tristique in, vulputate at, odio. Donec et ipsum et sapien vehicula nonummy. Suspendisse potenti. Fusce varius urna id quam. Sed neque mi, varius eget, tincidunt nec, suscipit id, libero. In eget purus. Vestibulum ut nisl. Donec eu mi sed turpis feugiat feugiat. Integer turpis arcu, pellentesque eget, cursus et, fermentum ut, sapien. Fusce metus mi, eleifend sollicitudin, molestie id, varius et, nibh. Donec nec libero.</p>
    <h2>H2 level heading </h2>
    <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Praesent aliquam, justo convallis luctus rutrum, erat nulla fermentum diam, at nonummy quam ante ac quam. Maecenas urna purus, fermentum id, molestie in, commodo porttitor, felis. Nam blandit quam ut lacus. Quisque ornare risus quis ligula. Phasellus tristique purus a augue condimentum adipiscing. Aenean sagittis. Etiam leo pede, rhoncus venenatis, tristique in, vulputate at, odio.</p>
</div>
<br class="clearfloat" />
   <div id="footer">
    <p>Footer</p>
</div>
</div>
</body>
</html>
@charset "utf-8";
body {
font: 100% Verdana, Arial, Helvetica, sans-serif;
background: #666666;
margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
padding: 0;
text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
color: #000000;
/* Tips for Elastic layouts
1. Since the elastic layouts overall sizing is based on the user's default fonts size, they are more unpredictable. Used correctly, they are also more accessible for those that need larger fonts size since the line length remains proportionate.
2. Sizing of divs in this layout are based on the 100% font size in the body element. If you decrease the text size overall by using a font-size: 80% on the body element or the #container, remember that the entire layout will downsize proportionately. You may want to increase the widths of the various divs to compensate for this.
3. If font sizing is changed in differing amounts on each div instead of on the overall design (ie: #sidebar1 is given a 70% font size and #mainContent is given an 85% font size), this will proportionately change each of the divs overall size. You may want to adjust based on your final font sizing.
.twoColElsRtHdr #container {
width: 46em; /* this width will create a container that will fit in an 800px browser window if text is left at browser default font sizes */
background: #FFFFFF;
margin: 0 auto; /* the auto margins (in conjunction with a width) center the page */
border: 1px solid #000000;
text-align: left; /* this overrides the text-align: center on the body element. */
.twoColElsRtHdr #header {
background: #DDDDDD;
padding: 0 10px; /* this padding matches the left alignment of the elements in the divs that appear beneath it. If an image is used in the #header instead of text, you may want to remove the padding. */
.twoColElsRtHdr #header h1 {
margin: 0; /* zeroing the margin of the last element in the #header div will avoid margin collapse - an unexplainable space between divs. If the div has a border around it, this is not necessary as that also avoids the margin collapse */
padding: 10px 0; /* using padding instead of margin will allow you to keep the element away from the edges of the div */
/* Tips for sidebar1:
1. Be aware that if you set a font-size value on this div, the overall width of the div will be adjusted accordingly.
2. Since we are working in ems, it's best not to use padding on the sidebar itself. It will be added to the width for standards compliant browsers creating an unknown actual width.
3. Space between the side of the div and the elements within it can be created by placing a left and right margin on those elements as seen in the ".twoColElsRtHdr #sidebar1 p" rule.
.twoColElsRtHdr #sidebar1 {
float: right;
width: 12em; /* since this element is floated, a width must be given */
background: #EBEBEB; /* the background color will be displayed for the length of the content in the column, but no further */
padding: 15px 0; /* top and bottom padding create visual space within this div */
.twoColElsRtHdr #sidebar1 h3, .twoColElsRtHdr #sidebar1 p {
margin-left: 10px; /* the left and right margin should be given to every element that will be placed in the side columns */
margin-right: 10px;
/* Tips for mainContent:
1. If you give this #mainContent div a font-size value different than the #sidebar1 div, the margins of the #mainContent div will be based on its font-size and the width of the #sidebar1 div will be based on its font-size. You may wish to adjust the values of these divs.
2. The space between the mainContent and sidebar1 is created with the left margin on the mainContent div. No matter how much content the sidebar1 div contains, the column space will remain. You can remove this left margin if you want the #mainContent div's text to fill the #sidebar1 space when the content in #sidebar1 ends.
3. To avoid float drop, you may need to test to determine the approximate maximum image/element size since this layout is based on the user's font sizing combined with the values you set. However, if the user has their browser font size set lower than normal, less space will be available in the #mainContent div than you may see on testing.
4. In the Internet Explorer Conditional Comment below, the zoom property is used to give the mainContent "hasLayout." This avoids several IE-specific bugs that may occur.
.twoColElsRtHdr #mainContent {
   margin: 0 13em 0 10px; /* the left margin will look best if you match the padding amount to the header and footer. */
.twoColElsRtHdr #footer {
padding: 0 10px; /* this padding matches the left alignment of the elements in the divs that appear above it. */
background:#DDDDDD;
.twoColElsRtHdr #footer p {
margin: 0; /* zeroing the margins of the first element in the footer will avoid the possibility of margin collapse - a space between divs */
padding: 10px 0; /* padding on this element will create space, just as the the margin would have, without the margin collapse issue */
/* Miscellaneous classes for reuse */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
float: right;
margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page */
float: left;
margin-right: 8px;
.clearfloat { /* this class should be placed on a div or break element and should be the final element before the close of a container that should fully contain a float */
clear:both;
    height:0;
    font-size: 1px;
    line-height: 0px;

Outlook does not display linked images after installin 7525 printer

Installed 7525HP photosmart printer earlier today. Since installation, Outlook does not display linked images when I open emails. p6620f HP desktop computer.

You're probably not going to like the answer: Welcome to HTML-based email, and web (browser- or mail-based) rendering incompatibilities and quirks.
Newer Microsoft Internet Explorer is (much) better than older releases, so see if a newer Windows client or a newer version of Outlook does better.
If you really want to see what's going on here, view the raw HTML that's getting generated, and see what Microsoft wants or uses or expects within Outlook, and send that.

This Formula(Function) compiles but does not display any result

Please can anybody help me resolve this issue.The code below is a code for a formula(function) column in oracle report, i have complied this code and it successfully complied but it does not display any result for the column having a stock balance in the entire report.
function CF_STOCK_BALFormula return Number is
     v_all_positive NUMBER;
     v_all_negative NUMBER;
begin
     IF :transaction_type IN ('RECEIPT', 'RETURN') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal + :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal + :quantity;
          END IF;
     ELSIF :transaction_type IN ('ISSUE') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal - :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal - :quantity;
          END IF;
     END IF;
RETURN (:cp_stock_bal);
end;
Edited by: Gbenga on Jan 17, 2012 11:30 PM

Please can anybody help me resolve this issue.The code below is a code for a formula(function) column in oracle report, i have complied this code and it successfully complied but it does not display any result for the column having a stock balance in the entire report.
function CF_STOCK_BALFormula return Number is
     v_all_positive NUMBER;
     v_all_negative NUMBER;
begin
     IF :transaction_type IN ('RECEIPT', 'RETURN') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal + :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal + :quantity;
          END IF;
     ELSIF :transaction_type IN ('ISSUE') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal - :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal - :quantity;
          END IF;
     END IF;
RETURN (:cp_stock_bal);
end;
Edited by: Gbenga on Jan 17, 2012 11:30 PM

My Creative Cloud desktop app does not display any means of signing in to my account. What would be the reason?

Creative Cloud desktop app does not display any means of signing in to my account. What would be the reason

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
or
Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

Mac 101: File Sharing
Mac OS X 10.7 Help: Transfer files between two Mac computers
Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
Mac OS X 10.7 Help: Use iDisk to share files
Mac OS X: Sharing your files with non-Apple computers
How to share a Mac's files with a PC and vice versa.

My top and under folder does not list any images

Suddenly, my top and under folder does not list any images ?
For exemple : lightrom 0 /2013 0 /2013-05-11 126
LR5 ; I run windows 8 64bits
Thanks for your help.
Best regard
Regis

Library Menu, select "Show Photos in Subfolders".

I can not install the Express after the Extreme tha AirPort tool is of no help. It does not display any base station.

I can not install the Express after the Extreme tha AirPort tool is of no help. It does not display any base station.

What is the exact model of the AirPort Express that you are trying to install? Which version of the AirPort Utility are you using? What is the operating system and version, and on what device, are you running the AirPort Utility on?

TS3297 ITunes for IOS does not display any content in the iTunes store

iTunes for IOS does not display any content in any section (other than Genius tab).
NB: I am signed in with my Apple ID & have an Internet connection.
On selecting say the "Music" tab the display briefly say's "Loading ...", but nothing displays, just a white screen.
I have tried signing out of iTunes & re-setting the iPad, but this does not fix the problem.
(The App Store is working fine!)

Status is :540672
<REQUESTRESULT>
<RESULT>
<UID></UID>
<STATUS>CAPI_STAT_DATA_ICAL</STATUS>
</RESULT>
<FAILURE>
<UID></UID>
<STATUS>CAPI_STAT_DATA_ICAL</STATUS>
</FAILURE>
<PARSE ERROR>
<MESSAGE>VALUE?TE</MESSAGE>
<STATUS>CAPI_STAT_DATA_ICAL_PARAMVALUE</STATUS>
<VTEXT>VALUE?TE:20060830
END:VEVENT
END:VCALENDAR
</VTEXT>
</PARSE ERROR>
<PARSE ERROR>
<MESSAGE>VALUE?TE</MESSAGE>
<STATUS>CAPI_STAT_DATA_ICAL_PARAMNAME</STATUS>
<VTEXT>(null)</VTEXT>
</PARSE ERROR>
<PARSE ERROR>
<MESSAGE>VALUE?TE</MESSAGE>
<STATUS>CAPI_STAT_DATA_ICAL_PARAMNAME</STATUS>
<VTEXT>(null)</VTEXT>
</PARSE ERROR>
</REQUESTRESULT>

My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error.

My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error. I'm not sure why neither is working, it just suddenly happened. I have done nothing different.

Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands.

Safari on iPad does not display GIF image anymore after upgrade to iOS 4.3

1) Could anybody (especially those in Apple iOS or Safari teams) advise me why the Safari on my iPad cannot display some images (probably in GIF formats) on some webpages anymore, after I upgrade my iPad to iOS 4.3? These images on the webpages can be properly displayed on when my IPad runs with iOS 4.2.1. There should be no problem with these embedded image files because they can still be properly display in Safari running on my Macbook air.
2) Is there any solution to this problem?
3) Is it possible to downgrade my iPad back to iOS 4.2.1?

I am having the same issue with two different ipads (one Wifi and one Wifi-3g) running on our home network (Verizon FIOS). The website in question is www.tvwc.com and the main logo in the upper left corner, a .gif, does not display, only a "?". Other images on the site, in .jpg format, display correctly.
I was running 4.2.1 and am now just upgrading to 4.3.

Adobe Lightroom 3.2 does not show any images

I just updated to Lightroom 3.2 this week. It worked fine the past few days. Then last night, it started kind slow, then showed images shown in Library grid/strip view for any images. But it still show meta data. And no images in Develop tab. But if I move the mouse on the image area, the RGB values in histogram (upper right) still changes with differnt values. Just no images. And it still shows the shooting data.
I reinstalled it twice and oit still behave the same.
Then I build a new catalog. I see images only in the pre-import screen. Once a folder is imported, no images in this new catalog.
I also tried to clear cache, removed preferrance, and then create a new catalog. When I tried to import my images, there is a little triangle showing on top of each image, clicked and it said" Lightroom has some difficulty import the image file".
But PS CS5 Bridge and PS CS5 works just fine. I can actually right click on a grid (even though not seeing the real image or preview) and edit in PSP CS5.
BTW, the day before yesterday's problem, I was watchng the new Lightroom tutorial from this site (which I bought) and adjusted preference,... I don't know whether such a change of setting may cause Lightroom having difficulty seeing images.
Any help will be appreciated.
If anyone know how to submit a support request to Adobe please let me know too. I cannot find a way to get support free opf charge and I will not pay for their crash.
Eric

This happened to me before and did so again yesterday when I updated my NVidia drivers. NVidia evidently changes the display's color profile to "Use Windows display calibration." The solution is to reset the color profile for each of your displays back to what was set before. I am using Windows 7-64. This does not matter as for the ultimate solution, but getting to the proper dialog is easy: click Start and in the search box type "color management." You should get the proper dialog box open with "Color Management" at the top. When I have had this problem it showed Device: Display 1 {its name}, no ICC Profiles in the ICC Profiles list area and "Use Windows display calibration" below. Click "Add..." and find your display profile in the list. There are very many. Mine were right at the very bottom. Pick it. Set it as default for your display. Repeat for other monitors, if any. ...and the pictures are viewable back in Lightroom!
Good luck!
Greg

IMac G5 will not boot and if it does, it does not display any logo

Hi everyone, any assistance with this issue would be greatly appreciated. This is my godmothers iMac G5 that my family gave her a few years ago, it is the 2.0GHz model with no iSight camera but has the built in WiFi and Bluetooth.
I went to start it today, after it being off for a week and a half and it will not boot. I start it up and it displays the solid white LED light on the front and revs its fans until I stop it. I got it to get past this once by resetting the SMU but all it did was make the Apple hardware test sound noise and get a blank white screen. No Apple logo or anything. Entire time it rev'd its fans.
Thank you! If it is broken I will most likely sell it for parts and either buy her an older unibody MacBook or wait for the next-gen iPad with FaceTime and a buy a keyboard dock.

HI and welcome to Apple Discussions...
If you have the install disc that came with this G5, try checking the startup disk for errors.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 10% to 15% free disk space
If it won't boot from an install disc, try booting in Safe Mode Launch Disk Utility (Applications/Utilities). It's possible to do a live verification in Safe Mode to check the startup disk for errors, but not repair disk but at least you might get some insight as to the problem.
Carolyn

Mac OSX 10.9.4 - Adobe Download Assistant does not display any products to download

I am attempting to download the free 30 day trial of Acrobat XI Pro, and I downloaded and installed Adobe Download assistant to do so. I successfully created an Adobe ID and have verified it. However, when I log in with my ID into the Adobe Download Assistant, no products display as being available for download (or display - period - before or after logging in). I have tried uninstalling and reinstalling the software, but no luck. The screen I am looking at is as follows:
Is there something I'm missing? I can go to "Select product" and select either "Photography", "Video" or "PDF", but when I click any of the options, nothing happens.
I couldn't seem to find a comparable problem on the forums. Any help would be appreciated, especially insofar as I am trying to evaluate whether to purchase the product in question.

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Aperture 3 project does not display any images in one Project

Similar Messages

Maybe you are looking for