Aperture and ATI Radeon 9800 Pro Mac Special Edition

I have noticed a few people on this board have the
ATI Radeon 9800 Pro Mac Special Edition (256MB- G5
only) listed on thier specs on the bottom of posts
so I was wondering what your experience using this
card is like with Aperture, even-though it I realize
that it is not the current top of the line card ?
How about a rating from 0 to 5 stars where 5 would be
the best currently available.
I have just the card you mentioned.
I think how happy you'd be with it depends on what kinds of files you are using. I work with TIFF files because my camera is not supported, and performance with those is better than with true RAW files.
I generally do not see much delay but a few adjustmnet tools (Shadows & Highlights & Spot/Patch) can get a bit pokey.
Honestly if I were upgrading my card all over again I would bit the bullet and get the x800XT, which I am mulling over even now... I was hoping it might drop a bit more in price but it does not seem to be doing so.
If you want an absolute rating I guess I'd give it three stars, though again that is with the files that I use. For other larger RAW formats like D2H files and such, I think it's more of a two.
One last thing to note is that I have not tired other raw formats since the update, so it might be upgraded from a two... I was waiting to see what kind of speedup Aperture 1.1 offered in addition to just the system update. I'll report back when that update comes out.

Similar Messages

Getting two Displays to Work on a Radeon 9800 Pro Mac Special Edition

Hi Folks
I am reallt having difficulties here. Let me explain:
1. I have a Power Mac G5 (2004) Dual 2GHz WITH 2GB Ram (http://support.apple.com/specs/powermac/PowerMac_G5_June2004.html)
1. I have just purchaed two 24" Dell Displays that come with DVI and VGA leads (http://accessories.euro.dell.com/sna/productdetail.aspx?c=uk&l=en&s=bsd&cs=ukbsd t1&sku=59234).
2. I have also purchaed Radeon 9800 Pro Mac Special Edition 256 DDR (http://ati.amd.com/products/radeon9800/radeon9800proseme/specs.html).
3. I want to connect both displays to my 9800. One of them can go into the DVI port, but what do I need to get the other monitor working on the 9800? I presume I will need some kind of adapter?
I have spent literally hours, and hours seaching forums and google to find the answer to this.... just can't find the solution.
If anyone can help I would be indebted.
Thank you so much.

Hey Hatter
Thats great. I have already bought the 9800 so unfortuantly Im committed. I managed to get it for about $200 brand new so I felt that was a reasonable price.
I have pruchased the following adapter - http://www.pcwb.com/catalogue/item/GEFEN068?speedtrapid=froogle&lead=froogle
Thanks so much for the advance....your a star mate!!

Having trouble with my G4 MDD 867MHz DP and ATi Radeon 9800 Pro video card.

I just recently purchased the ATi Radeon 9800 Pro Mac edition card on ebay. I installed the card on my G4 and turned it on thinking everything would work with no problems, but when I turned it on the grey apple screen came up fine and then it changed to a sky-blue screen with nothing on it and remained on that screen. My desktop or any of my apps did not load up at all. I reset the PRAM and the NVRAM as the seller I bought the card from instructed me to and still I get the same result. Is anyone familiar with this problem? I was wondering if my monitor was the problem because I'm using a Dell LCD monitor as the display for right now? I need help! I'm trying to get this up and running so I can start editing. Whatever information anyone can give me will be greatly appreciated!

Sometimes display cards that support multiple displays (or a second display card in the same Mac) can cause the display you are using to be the SECOND display in a multiple-display "extended desktop".
When this happens, the MenuBar and cursor may be drawn perfectly, but be on the "other" screen, and it is very difficult to determine what has happened. \[This problem is sometimes caused by inadvertently leaving an adapter or cable on an unused display port.]
Try moving the mouse many times to the right to see if the cursor suddenly transitions onto your screen, then try the same experiment to the left.

What is the correct installation sequence for my ATI Radeon 9800 PRO MAC AGP 128MB into my Quicksilver 867 G4?

Hi.
I just got my used ATI Radeon 9800 PRO MAC AGP 128MB card.
What is the correct installation sequence into my Quicksilver 867 G4 running 10.4.11 on one drive 10.5 on another?
The original NVIDIA GeForce2 MX - 32MB SDRAM went bust.
Is the driver build in 10.4?
Do I remove the old driver?
If I need to install the driver that came with it, (10.3.6) should the card be installed first?
What about firmware updates?
Thank you for all your time and patience.
W.W.

I think it's the card, but here are some files that may affect it...
/Users/YourUserName/Library/Preferences/ByHost /com.apple.preference.displays.<12digitHex#>.plist
/Library/Preferences/com.apple.windowserver.plist
/Users/YourUserName/Library/Preferences/ByHost/com.apple.windowserver.<12digitHe x#>.plist
/Users/YourUserName/Library/Preferences/ByHost/.GlobalPreferences.<12digitHex#>. plist

Ati radeon 9800 pro mac edition power cable install

radeon 9800 pro mac edition power cable is a 6 pin arrangement on the one I have. What cable do i need in order to attach it to a late 2005 G5 2.0 dual core power source?

The Radeon 9800 Pro is an AGP graphics card.
It CANNOT be used in a Late 2005 PCIe graphics G5.
IF you have an AGP graphics model of G5, using a Molex splitter is how it is done.

9600xt oem vs 9800 Pro Mac Special Edition

I would like to compare my OEM card with the 9800 with 256 of RAM for the purposes of driving Hi Def TV from an Elgato EyeTV 500 on a Plasma screen (as a second display). The 9600 does a fairly good job of doing this at 1080i, but i notice that this image is sometimes jerky and I wonder if the upgrade will improve the overall smoothness of the picture. Please chime in if you are experienced with either card. I would really like some guidance before commiting to a purchase. Much thanks.

I performed the same upgrade you are proposing. I did purchase a Verax fan because the 9800 fan is quite noisy. The card is absolutely awesome with Hi Def. No jerkiness; a solid performer in older games (quake 2, doom3, AA). You'll be happy with it and you can find them on eBay for under $100.

Ati Radeon 9800 Pro won't start up mac!

I just got this Ati Radeon 9800 Pro 256MB AGP from ebay and installed it promptly but my mac just won't start up!
I tried placing back my existing nvidia card and it booted up fine. Am i being ripped off with a PC version or something? I noticed there's a extra piece of chip to insert from my old nvdia card but not the new ati one.
But i checked on the net and found that the ati radeon 9800 mac cards also do not have that extra chip.
Here's a URL of the card i bought. (http://i4.ebayimg.com/01/i/000/da/aa/1988_1.JPG)
Any idea or advice guys? Thanks in advance.

Hi-
The image is just a stock image from ATI, of a 9800 Pro- which one is impossible to tell.
Since you are calling the card a 256mb version, the card is a PC card (unless it,s blue). It was advertised as a Mac card? If so, it has been flashed. BUT, if it is an 8x AGP card, it needs pins #3 and #11 taped to work in your 4x AGP QS. See this article.
Do you have the eBay link to the card that you bought (the listing)?

Can I replace an ATI RADEON 9800 PRO-(256MB)-MAC EDITION with Mac ATI Radeon 9800 Pro 128mb Video Card For G4/G5

Hi,
I am trying to help a friend whose graphics card has bust.
The old one was an ATI RADEON 9800 PRO-(256MB)-MAC EDITION.
I've been looking on ebay and it seems a lot cheaper to get a Mac ATI Radeon 9800 Pro 128mb Video Card For G4/G5.
Can I just swap them over? The connectors are not identical according to the photographs.
Thanks.

I'd like to thank everyone for all the really useful information in this thread. It helped me solve a similar problem, which I'll describe here briefly in case it helps someone else.
I have a 2004/5 dual 2 Ghz PowerPC G5 and an Apple Cinema HD display linked, as I later found out, with the now defunct ADC connector. The display suddenly started to look like that scene in The Matrix, when code falls like rain down the screen, and I worked out I needed to replace my Radeon 9800 pro video card (I discovered the board was blue when I removed a thick layer of dust).
I took japamac's excellent advice and bought a Geforce 6800 Ultra from the linked eBay seller in Hong Kong, who delivered it extremely quickly, along with the cables to plug it into the DVD drive power source and a CD with installation instructions. It was only then that I realised the card had two DVI connectors and my display needed ADC (I hadn't understood the difference).
eBay came to the rescue again with a seller who had a secondhand DVI to ADC adapter, which Apple produced when it phased out ADC about six years ago but no longer sells. It has its own power supply and looks like a large version of the Mac laptop power cables - and has added signifcantly to the pile of spaghetti under my desk.
Installing the Geforce 6800 Ultra is fiddly, and a bit scary if you're not used to delving into the insides of a Mac, but the instructions were clear and illustrated with useful photos. The video cable has four connectors. Two fit into the end of the card, the other two (linked in a Y shape) form a bridge between the DVD/superdrive and its power cable. You have to remove the DVD drive, unplug it, and then plug one of the two Y video card connectors into the DVD power cable and the other into the DVD drive itself. Then you replace the DVD drive, plug the two remaining cable connectors to the video card and ease it into the old card's AGP slot.
Finally, with the G5 reassembled, plug the adapter's DVI connection into the back of the card, plug the Cinema Display ADC cable into the adapter block, plug the adapter's USB cable into the G5 (this enables the the USB ports on the back of the display to work), and power up.
At the time of writing, the display has been up and running for a couple of hours and all seems fine.
Thanks again everyone for all your help and advice. If it wasn't for communities like this, it would be virtually impossible to solve problems with old but still serviceable Macs.

ATI Radeon 9800 Pro and Apple Cinema Display compatibility

I'd like to buy an Apple Cinema Display for my 5-year-old Power Mac G5 with an ATI Radeon 9800 Pro, but I'm having trouble understanding what I can and can't hook up to my system.
I was thinking of getting a 30" display, but the Apple Store says I need a Dual-Link DVI, which I don't think my graphics card supports, but the Store also says I need an ATI Radeon 9650 or better, which I imagine the 9800 Pro is.
I've looked at the ATI site for data on the graphics card, but their online manual shows a completely different set of connections on the card. They show VGA and S-Video out ports that mine doesn't have.
Does my ATI Radeon 9800 Pro have dual-link? If so, can I use the 30" display? If not, can I still use the 30" display?
If I can't use the 30" display, are there any compatibility problems with the 23" Apple Cinema Display?

The 9800 is faster than the 9650, but it doesn't have a dual-link DVI port.
Make sure you were looking at the Mac section of ATI's site. PC and Mac versions of the same card may have different port configurations.
AGP cards with dual-link DVI, starting with the fastest:
ATI Radeon X800 XT 256MB (ADC, dual-link DVI) (Some reports of problems with Leopard)
<http://www.welovemacs.com/0831xeghr.html>
NVIDIA GeForce 6800 Ultra 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613332.html>
NVIDIA GeForce 6800 GT 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613441.html>
ATI Radeon 9650 XT (Single-link, dual-link DVI)
<http://www.mac-pro.com/ATI-Radeon-9650-256MB-for-G5-661-3593?sc=2&category=42>
ATI Radeon 9600 Pro PC & MAC Edition RoHS 256MB AGP (Single-link, dual-link DVI)
<http://shop.ati.com/product.asp?sku=3170809>
A 23" will work with any G5 card.

ATI Radeon 9800 Pro and kt4 ultra

Hello
i was curious to know of any problems with the Kt4 ultra motherboard and the Radeon 9800 pro??
my system constantly crashes back to the desktop, or completely locks when i play Command & Conquer Renegade.
there are also some "misdrawn?" walls in the game also,...
i have all the latest drivers for the motherboard and the card,(including the released today catalyst drivers from ati.com)
i have also tried the drivers from driverheaven.net, but same thing happens,...
this is truly aggreviating...
some system specs:
kt4 ultra
antec 380 true ps
2500+ barton running at 11.5*173 @ 30c idle, 33c full load
corsair 2*256 3200LL
built by ati radeon 9800 pro 128mb
ive read where you can increase the agp voltage to try and fix the problem...and i also saw where one guy was just going to buy another motherboard b/c of the issues...
any help is truly appreciated
thx

FWIW, in case anybody is reading this thread in future and has problems with this Board and this card, I can report that I have now(at my second attempt) successfully installed a Radeon 9800 Pro on MY kt4 uLTRA motherboard.
As noted above, I purchased a new Antec True Power unit, prior to installing for a 2nd time. I am not sure whether that was necessary, but it certainly didn't hurt. The successful installation process was as follows:
1) Download the latest catalyst drivers from ATI
2) Set monitor to lowest possible standard (640 x 480, 16 colours if possible - in my case my digital monitor could not be set lower than 800 x 600)
3) Uninstall drivers for existing video card
4) Replace video card
5) Install ATI drivers
6) restore settings on monitor to maximum.
At that point, after restarting the computer, I had a CLI.exe error. After Googling for this problem, I discovered that I needed to download Net 1.1 from Microsoft. After downloading and installing that additional program, Radeon 9800 Pro is now working perfectly.

G5 graphics card error: ATI Radeon 9800 pro

Hi there,
The display on my mac has all of sudden gone haywire, there's bars across the entire screen that keep on changing colours/flickering etc, and when I try to drag open windows they become blocks of noisey colour.
So far i've tried resetting PRAM/NVRAM, ran the hardware test which picks up an error on the VRAM which is: 2ATI/1/4:113-A1440; ;16 (I think, it's very difficuilt to read properly), also pulled the graphics card out, given it a bit of a dust etc and put it back in to no avail. I've also tried plugging in another monitor which had the same problem.
I'm assuming my graphics card's fried, but I wanted to check on here to see if anyone had any other ideas. I'm slightly wary about splashing out on a new card when i'm not completely sure it's the card that's the problem, it could be the logic board for all I know. Also not too keen in taking it to the apple shop as it'll be away for up to two weeks, and I really need a working machine just now.
My specs are G5 single 1.8ghz, 512 ram, ATI Radeon 9800 pro card (not the special edition)
Apologies for the long message, and for any spelling mistakes as I can barely see what i'm typing, any advice most appreciated.

I would suggest first blowing compressed air all around the inside including logic board and video card (if you are adept at removing the card and reinstalling the better, careful not braking the AGP clip at the end of the slot that latches into the end of the card). Also keep the can upright at all times. This should help dislodge dust that build up over time and may cause overheating and unusual operation.
Then run Apple Hardware Test disc that came with your computer and run the extended test. It should at least help give you an idea if it's the logic board and/or video card. It's not 100% failsafe, but worth a shot.

Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?

Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?
And is there driver updates for anyone using the all-in-ones HP printers...has anyone been able to use their scanners since the update? and has the dual screen support been added to avoid the blue screen on startup?

The ATI Radeon 9600 PC/Mac edition 256 MB should work in the MDD G4. It has two DVI ports (one is dual-link and can support a 30" display). You will need adapters for ADC displays.

ATI Radeon 9800 Pro Wierd Lines Bad Card -- The solution

After updating my Computer to 10.4.8, I frequently had odd lines and Weird Colored Shapes dancing across my screen. Restarting was the only thing that solved the problem but It started becoming more frequent as time went on, Every 30 minutes having to do a restart. The Graphics card is the Retail ATI 9800 Pro 256 Special Edition 8x AGP, the card is 6 months old.
I bought a Replacement 9800 and the problem was solved. I sent the damaged one to ATI/AMD and it took them two weeks to send me a new one. A lot of people are having the same problem, Don't waste you time trying to sleuth it like I did, just pull it and send it in for repair. ATI/AMD were pretty easy to deal with, I didn't even have to show them proof of purchase.
G5 Dual 2Ghz Mac OS X (10.4.8) 3.5 GB of Ram

Hi,
As has been stated above, the 9800 has heat issues in most Mac towers. I was politely told I didn't know what I was talking about, but I'm afraid I do and those who choose to ignore the hundreds of posts about this issue do so at their own risk. If you have a warranty, that's nice.
The Arctic Cooling Silencer 1 (Rev. 2) is a good brand of GPU cooler. It's your call, put a better cooler on the card or get another card. For $25 and 10 minutes work I'd put a cooler on it and see how it works.
BTW, a properly flashed PC 9800 is a very nice card and works the exact same as a Mac Edition. I have several.
Until the RoHS compliant ATI Mac Edition cards are available, it is VERY hard to find a better video card. The ATI x800xt 256MB is the best card for performance and it will push a 30" display - for over $300. Most vendors are saying 3 weeks availability and have been saying that for 6 months.
Regards,
Dave

ATI Radeon 9800 PRO openGL Troubles

Machine Name: Power Mac G4
Machine Model: PowerMac3,5
CPU Type: PowerPC 60? (1.1)
Number Of CPUs: 1
CPU Speed: 2 GHz
L2 Cache (per CPU): 512 KB
Memory: 1.25 GB
Bus Speed: 133 MHz
Display
ATI Radeon 9800 Pro:
Chipset Model: ATY,R350
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4e48
Revision ID: 0x0000
ROM Revision: 113-A07525-130
I have been looking for someone with the same or similar problem as mine to no avail
Ok so heres my problem...a few months ago i noticed that the screen saver had frozen on my G4 mac
At the time i didn't think anything of it so i try to reboot but it wouldn't get any further than the "Blue" screen after weeks of trouble shooting, reading through logs and surfing what felt like 90% of the net i tracked it down to the "ATI Radeon9700 Extensions" in my system folder.
As you can see from above i have a "ATI Radeon 9800 PRO" and i presume that it runs off the 9700 drivers because there are no 9800 extenstions in the driver updates from ATI....
Anyway this is the strange bit ....if i boot up in "Safe Mode" and delete all the "ATI Radeon9700 Extenstions" below
ATIRadeon9700.kext
ATIRadeon9700DVDDriver.bundle
ATIRadeon9700GA.plugin
ATIRadeon9700GLDriver.bundle
ATIRadeon9700VADriver.bundle
Then trash...
Extensions.kextcache
Extensions.mkext
Then put a new copy of the "Radeon9700 Extensions" from the 10.4.8 upgrade back in, it boots fine.
These extensions come with the apple OS updates so everytime i upgrade the OS i have to go through the above steps again.
I am starting to think that the openGL capabilities of my card is fooked because the screensaver that im talking about is "Flurry" and it is really jerky now if i try to run it
I know that the SS users openGL
Also if i try and launch UT2k4 i get a crash log error of "unable to create pixel format.
This is what the boot up log looks like before i trash the extensions
13:03:04 localhost kernel[0]: 962:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 963:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 964:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 965:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 966:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 967:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 968:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 969:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 970:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 971:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 972:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 973:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 974:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 975:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 976:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 977:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 978:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 979:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 980:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 981:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 982:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 983:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 984:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 985:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 986:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 987:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 988:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 989:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 990:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 991:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 992:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 993:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 994:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 995:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 996:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 997:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 998:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 999:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1000:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1001:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1002:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1003:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1004:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1005:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1006:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1007:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1008:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1009:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1010:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1011:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1012:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1013:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1014:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1015:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1016:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1017:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1018:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1019:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1020:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1021:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1022:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1023:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 0xaeba99b7
Dec 28 13:03:05 localhost kernel[0]: ** ASIC Hang Log End **
Dec 28 13:13:02 localhost kernel[0]: ATIRadeon9700::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 2, need 5. RBBM_STATUS 0x8401c100
Dec 28 13:13:12 localhost kernel[0]: ** ASIC Hang Log Start **
Dec 28 13:13:12 localhost kernel[0]: 0x01004e48 4f000207 00000007 20080178
Dec 28 13:13:12 localhost kernel[0]: 0x13c280a4 c0003a0c 00000002 00000008
Dec 28 13:13:12 localhost kernel[0]: 0x80000003 0000001f 00002a2a 8401c100
Dec 28 13:13:12 localhost kernel[0]: 0x00000002 00100000 51b3a220 40000000
Dec 28 13:13:12 localhost kernel[0]: 0x60000000 0002000a 0008bbbb 00000000
Dec 28 13:13:12 localhost kernel[0]: 0x00000003 0000444f 10031004
Dec 28 13:13:12 localhost kernel[0]: 0:0x000101ce
There was a lot more of this but i dont want to spam the thread
This is the interesting bit...
" Dec 28 13:03:05 localhost kernel[0]: ** ASIC Hang Log End **
Dec 28 13:13:02 localhost kernel[0]: ATIRadeon9700::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 2, need 5. RBBM_STATUS 0x8401c100"
Any ideas ...please dont just say"Buy a new card" i would really like to get to the bottom of this...if it turns out that my card is fried then fair enough
Quick silver 2002 Mac OS X (10.4.8) processor upgrade to 2Ghz gigadesign 7A</

I'm getting exactlly the same error. This occures after several weeks of sudden & spontaneous shutdowns. And now I get this error whenever I try to launch W.o.W.
Feb 25 07:41:52 drive-0 kernel[0]: ** ASIC Hang Log End **
Feb 25 07:41:53 drive-0 kernel[0]: ATIRadeon9700::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 2, need 5. RBBM_STATUS 0x80016100
Feb 25 07:42:04 drive-0 kernel[0]: ** ASIC Hang Log Start **
Now, my card is actually a 9800 Pro. I think it's something to do with OpenGL. I'm gonna try to launch other apps that access OpenGL directly and see what I get.

What would you replace an ATI Radeon 9800 Pro (256MB) with?

Hi,
I started a thread before asking whether I could replace a 256MB card with a 128MB card, even though the interface was a different shape.
But, as I know so little about Macs and graphics card, it seems wiser to ask
What would you replace an ATI Radeon 9800 Pro (256MB) with?
The computer is user for photo editing and normal internet/email use. The photo editing is done on Adobe Photoshop for professional treatment of photographs.
The computer is a Power Mac G5 (1.6GHz) and budge is £80 / $120.
Thanks in advance, Franc.

Hi-
Please check my recommendations in your other thread.
Better options for the 9800 Pro are the Radeon 9800 XT, Geforce 6800 GT, Geforce 6800 Ultra, or if one has the money or finds a good deal, a Radeon X800 XT.
For your budget and uses, the Geforce cards are a performance value buy.
BTW, I have owned all of the cards, used all of the cards, and tested all of the cards.
Graphics Cards- ATI and Nvidia
See my testing pages starting here:
Page 1: Open GL

Aperture and ATI Radeon 9800 Pro Mac Special Edition

Similar Messages

Maybe you are looking for