Aperture doesn't generate xml file
Aperture 3.5.1 is supposed to generate an ApertureDatabase.xml file to use images in third-party software. I have the Preference set to generate this file whenever Aperture closes, but my main Aperture library does not generate this file. I tried setting the Preference to Always and that also doesn't work.
My smaller, newer Aperture libraries do generate the xml file as they're supposed to. Only the older, much larger Aperture library does not generate it. This same problem exists on my iMac as well as on a copy of the library on my MacBook Air.
I created a new Aperture library that did generate the xml file. Then I imported the older library into it (took forever) but this library no longer generated the xml file.
Can I get Aperture to do what it's supposed to do?
I was asking the OP, it is usually best to start your own thread becuse, as this case shows, posting to another's thread can cause confusion.
You are looking at the preferences when the library in question is opened, correct? As I wrote this is one (if not the only) preference that is set on a per library basis. If you look at it while a different library is opened you might not be seeing the correct setting.
You could try the steps shown in Aperture 3: Troubleshooting Basics, that is always a good place to start.
Having said that, and while not having the XML file can be a problem, I don;t understand why Hazel would need the XML file to import into Aperture. Aperture is responsible for writing the XML file and it does that to reflect the state of the library.
If you are looking for a simple way to import into Aperture you should look at Automator. A simple one or two action workflow does it.
regards
Similar Messages
-
Generate XML file for payroll result
Hi,
I tried to generate XML file for chinese payroll result by t-code: pu12, but i can not find the interface format for china payroll(here is format for other country vesion like international, france...). How can i generate xml file for chinese payroll result. DO i need to create a format type? Is there any other way? thank you in advance.Coming back to my question is it really possible to generate bigger XML on 9i.
Sure. But not in one go.
I would use SQL/XML functions instead and paginate the result set so that each CLOB chunk doesn't exceed 4GB (or less). Each chunk could then be appended to a file using UTL_FILE.
Alternatively, as Oracle 9i supports parallel pipelined functions, you could also imagine doing the job in parallel using automatic data partitioning on an input ref cursor.
That would require some postprocessing steps to rebuild the entire file from the different chunks though.
See : Pipelined and Parallel Table Functions -
Using servlet to generate XML file
What I want to do is simple but can't work. Hope you guys can give me a hint.
I succesfully generate XML file in command line using Oracle XML parser and class generator. Then I was trying to do it using servlet. it compiles fine but generate NullPointer exception at the line:
Emp e1= new Emp(); //Emp is the root of XML
I suspect the Emp constructor can't correctly find the globalDTD in its superclass -CGDocument. Please note this only happens in servlet setting, not is command line setting. Any suggestion to get arounf this?
Another unrelated question is that when I create a XML file using the Oracle XML parser, it seems all the elements a file has to be added once, otherwise the compiler will compalain about the missing element. this will be inconvinient when I constructing a big XML file, which I 'd liek to split into small piece and add them up. Maybe there is a good way but I just don't know it.
my email: [email protected]Hi,
I'm running into the same problem deploying the classes generated by the class generator. Code works fine from JDeveloper, but had to put my DTD in the directory where my classes are. Deploying the classes with Apache's JServ gives me a NullPointer exception on the first addNode method. I guess it can't find the DTD. I tried to put the DTD in many locations but this didn't fix the problem. Any suggestions?
Steve,
Did you fix this problem? Thanx!
null -
Error while generating XML file through RDF
Hi,
I wanted to generate a Report on some business case. For that I need to generate XML file first.
For generating XML file
1. I have built an RDF through Reports builder.
2. Saved the report to local machine with extension .rdf
3. Moved it to appltop/app/reports/US directory
4. Registered tha Report with Executable of type Oracle Reports
5. Defined Concurrent Program with OUTPUT as XML.
When I submmitted the program, it was giving an error as follows.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
A semi colon character was expected. Error processing resource 'https://oaphrd.humana.com/OA_CGI/FNDWRR.exe?temp_id=2088989...
+<?xml version="1.0" encoding="&Encoding"?>+
But, when I tried to sane the report directly to a file (file - > generate file -> XML) the XML was generated successfully.
How to get rid of this. Some one please help me out.
Thanks !
Edited by: Rajasekhar Reddy on May 4, 2012 1:23 AMHi,
I found the issue and corrected it. :)
This was happened only because of the Version problem of Report Builder with Oracle Applications.
Reports Builder 10g is not compatiblie with Oracle Applications 11.5.10.
Oracle 11.5+ will always expect the RDF from Reports 6i version. Because of this, the endocing was damaged.
You can observe in the earlier post as encoding="&Endoding". Here +&Encoding should be replaced by some encoding mechanism like "UTF-8".+
Finally corrected the version and got the Output as expected.
Thanks ! -
Error while generating XML file from rdf report.
Hi All,
we are having a rdf report that displays images retrieved from data base. I need to convert this report to xml report(using rtf template).
when i tried to run the report after changing the output of the concurrent program to "XML", i am getting the below error.
REP-1295: Data format of column 'PK1_VALUE' is unsupported.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1295: Data format of column 'PK1_VALUE' is unsupported.
images are stored in BLOB type columns.
Can anyone help me on this..
thanks
gtungalaHi Hussein,
Thank you for the reply.. i was sure that i will get correct response with in a day..
you people made this as one of the best technical forums..no doubt in that..
need some more help from you...!
The metalink docs say that it is not possible to generate xml file as the image is BLOB.
Can you please tell me any solution for developing xml template(rtf) which can display images that are stored in data base BLOB columns. Even PL/SQL script will do.. I have tried with changing the BLOB to CLOB in rdf query(by calling a function that converts BLOB to CLOB). it didnt help.
thanks in advance..
gtungala -
How to generate xml-file for SAP Fiori (UI add-on) with Solution Manager 7.0.1?
Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia. -
Generate XML file from RFC using Web Services
Hi,
I am trying to save an RFC enabled Function Module output to an XML file using ABAP web services.
I could able to create Web Service and release it using WSCONFIG/WSADMIN. I can actually get the output in XML file when i launch the web service home page. But I need this to be done in the ABAP program itself. So If i run the RFC I could able to create,release web service and capture the Generated XML file by SOAP runtime.
Any FM available?
Thanks,
Ram Sanjeevwhich version of WAS you are on .
if you are on WAS6.40 check the following weblog on how to consume webservice using the wsdl file.
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
lower version of WAS use class cl_http_client.
if this case you have to manually build the soap message.
/people/durairaj.athavanraja/blog/2004/09/20/consuming-web-service-from-abap
Regards
Raja -
Generating XML file from WORD file
hello
Everyboby.
I am trying to generate xml file from a word file.
but i am stucked with how to do it? any kind of help will be useful.
i think for doing this work i have to develop XSD file, because when i am creating the xml file, the hidden space within the word file is not catched.
please help me out.
waiting for reply
thanks
milindhello
after searching on the net i came to know that org.apache.poi.hwpf.* is used for reading word file and its contents. for converting it to xml i have to use org.exolab.castor.xml.*
now my problem is that POI is in its early beta version and there is no help or any sample examples for understanding the api.
so if you have any idea regarding it, please write to me.
waiting for your reply.
thanks
Milind -
How to generate XML file from a table without using UTL_FILE that too in local machine...
You downloaded the wrong XML Parser!
XSQL requires Java Parser. Well, there's a copy included with the XSQL package so you actually don't need to do another download.
You really don't need XSQL if you just want a XML file from DB, you just needed a XML SQL Utility. Download that and run the samples. -
Using a data file in jsp to generate xml file
hi
can anybody help me to
how to use a data file generated in unix in jsp to generate xml file.
by using beans i am able to generate the xml.
thanks in advance.You haven't provided adequate relevant information. If you need help provide proper relevant details.
-
How to send the dynamically generated XML file to other site for further processing?
I have a question regarding exchanging data between two systems
using XSQL servlet. The situation is descrbed as the follows:
Assume that we have a simple XSQL page named "emp.xsql"
<?xml version="1.0"?>
<?-- XSQL page file "emp.xsql" -->
<xsql:query xmlns:xsql="urn:oracle-xsql" connection="demo" >
SELECT * FROM EMP
</xsql:query>
and we can access it through the HTTP request likes
http://web_server_name/xsql/emp.xsql.
Usually we will the returned dynamic XML file and show it on the
screen. Now the problem is that we don't want to show the
generated XML file on the calling screen. Instead, we want to
send the generated XML file to other website for further
processing, say, using JSP or ASP likes
http://other_web_server_name/XMLProcessing.jsp?.....
How can it be implemented using XSQL servlet?
Any hint and outline of the solution is appreciated.
ThanksIke,
Do you have a sample. I am searched so much in this forum for samples. I looked on SAX Parser. I did not find any samples.
Please help me.
Thank you for your posting.
Padma. -
Form2xml generate xml files with "??????????" for non-latin characters
i used form2xml in oracle 10 g suit to convert forms 5 .fmb to .xml . using the command:
frmf2xml.bat OVERWRITE=YES myform.fmb
The forms contains arabic character set, but the xml file is generated with character "????????? " , and the xml file is unusable
what can i do to keep arabic characters in the generated xml files.
Edit:
I run form2xml on windows xp SP3 with arabic support (codepage =1256)
The xml file is generated as UTF-8I resolved the problem.
step1: search in the registry for every NLS_Lang key and modify its value to codepage 1256 using regedit
step2: in control panel-Region and Language , I modified language to be Arabic
Now every thing is good -
Hi I need this asap... "Java code to generate XML File from XML Schema"
Hi all....
I need this asap... "Java code to generate XML File from XML Schema i.e XML Schema Definition, XSD file".
Thankz in advance...
PS: I already posted in the afternoon... this is the second posting.take look at :
http://sourceforge.net/projects/jaxme/
this might help... -
Java code to generate XML File from XML Schema
Hi I need this asap... "Java code to generate XML File from XML Schema i.e XML Schema Definition, XSD file".
Thankz in advance...JAXB has been available as an early release download for some time. There are also XML Binding packages available from Borland (JBuilder) and Castor. These tools create Java classes from a source document, xml,dtd etc. You can use these classes to marshal-unmarshal XML documents.
Dave -
Permission Denied error generating XML file
We’re using ODI to write out files to a Windows CIFS file system through an agent installed on the ODI Unix server. In order to do this, we had to create the agent using a user ID that had permission to write to the Windows file system. For writing out flat files, this worked great; we have no problems at all.
However, for writing out XML files to the file system, we’re getting an error that says Permission Denied. We do NOT get the error if we write the XML to a Unix directory, only if we attempt to write it to the CIFS file system. I have two questions:
1. Is ODI able to execute against a Windows CIFS file system from UNIX to generate XML files?
2. If so, is there a list of permissions required on the fileshare that the ODI needs to generate the XML?
Below is the exact error we’re getting:
0 : null : java.sql.SQLException: Could not save the file /mdm_conversion/TST/2.lsm because a class java.io.IOException occurred and said: Permission denied
Has anyone ever performed something like this or encountered a similar problem?Hi,
I found the issue and corrected it. :)
This was happened only because of the Version problem of Report Builder with Oracle Applications.
Reports Builder 10g is not compatiblie with Oracle Applications 11.5.10.
Oracle 11.5+ will always expect the RDF from Reports 6i version. Because of this, the endocing was damaged.
You can observe in the earlier post as encoding="&Endoding". Here +&Encoding should be replaced by some encoding mechanism like "UTF-8".+
Finally corrected the version and got the Output as expected.
Thanks !
Maybe you are looking for
-
Rare Problem with latest NVidia GeForce 8600m GT
I downloaded apple's nvidia update from here for windows xp: http://docs.info.apple.com/article.html?artnum=306891 After installing it everything seemed to work fine, my dvi to video adapter was working like a charm. Now my problem was that after a f
-
my mobile n81 has some problem as while charging it give only white li8 and it is not getting on after a long time of chargin. can u tell wht is the problem in it and how can it be ressolved????????????
-
Tab key dosent work on some machines
Hi, We have a swing application in which we use tab key to navigate input fields. The problem is that on some machines the tab key does not do anything where on some it works perfectly. Could it be a JRE version or any other issue? (OS is Windows 200
-
During the installation of ArcSDE I keep getting the following error during the install. ESRI ArcSDE Server Setup Utility Tue Sep 04 13:18:34 2007 Creating ArcSde schema..... Successfully created ArcSde schema. Installing locators..... Successfully i
-
Image Format to PDF, when zoom --resolution not good enough eventhough image is 300dpi
Hi Guys, Anyone here know how to achieve a good image resolution when it is zoomed in? Doesn't matter the size but the quality of the image. I have tried 170dpi and 300dpi, it seems almost the same in image quality.. Please help. Thank you.