Generate XML file for payroll result

Hi,
I tried to generate XML file for chinese payroll result by t-code: pu12, but i can not find the interface format for china payroll(here is format for other country vesion like international, france...). How can i generate xml file for chinese payroll result. DO i need to create a format type? Is there any other way? thank you in advance.

Coming back to my question is it really possible to generate bigger XML on 9i.
Sure. But not in one go.
I would use SQL/XML functions instead and paginate the result set so that each CLOB chunk doesn't exceed 4GB (or less). Each chunk could then be appended to a file using UTL_FILE.
Alternatively, as Oracle 9i supports parallel pipelined functions, you could also imagine doing the job in parallel using automatic data partitioning on an input ref cursor.
That would require some postprocessing steps to rebuild the entire file from the different chunks though.
See : Pipelined and Parallel Table Functions

Similar Messages

How to generate xml-file for SAP Fiori (UI add-on) with Solution Manager 7.0.1?

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

Do i required to generate XML file for JAVA upgrade.

Dear frnds,
I am in process of upgrading EP 6.0 to EP 7.0 EHP1 for SR1.
I am following document Upgrade Guide SAP NetWeaver 7.0 Java Including Enhancement Package 1
As of media list guide i have selected .
51036889_1/2 for UPG MASTER BS7 SR1
51037093_1,2,3 for NW 7.0 EHP1 SR1 java SW components 1/2
51036767_2 for BS7 UC kernel 7.01 AIX 64 bit.
Well, i have a query here when i am doing upgrade on ABAP stack ECC 5.0 to ECC 6.0 EHP4 SR1 i alowed to select required compoenets , which eventually will generate mea XML file in Solution manager system.
But, When i have planned to UPGRADE only JAVA Stack for EP 6.0 to EP 7.0 EHP1 SR1. When i selected my system in Solution manager i am not getting option for UPGRADE.
If it is so how about my XML file during JAVA upgrade is not mandatory or not .. Please advice me on this.
regards,
rahul

Hi Rahul,
Yes, for Java Upgrade to EHP1 you need xml file. Normally you should be able to download xml file from solution manager from MOPZ.
If you are not able to download it from solman then you can also download the xml file from service market place and this is only for EHP1. Follow below procedure to download xml file from SMP for EHP1:
Go to https://websmp205.sap-ag.de/sp-stacks
Click on SP Stack download.
Select SP Stack Netweaver 7.0 (New window will open)
Then on New Window Select Source Stack, Target Stack and usgae type. Then Click Next.
On Next screen Select Kernel and IGS. Then Go Next.
On that screen you will get a option to Save as File. Then save as xml.
This is the xml file that you can use in upgrade.
For EHP4 you cannot download it from service market place.
Thanks
Sunny

XML file for SEPA Credit transfer

Hi All,
I am working in ECC 6.0. The system was configured to generate XML files for credit transfer as per SEPA guidelines. The files are being created in the application layer. But the line length is being restricted to 255 characters. As per the specifications of a XML file in apllication layer. all information should be contained in one single line.
Secondly the job log for the payment medium creation program contains the below mentioned line among others -
"Incorrect Print Parameter" of message class "0K", message no. 091and message ID I
Can anybody tell me what is going wrong?

HI,
Can you please help me in solving the issue when using the PMW format SEPA_CT.
My co. code currency is EUR and when paying the invoice which is in GBP i am not able to get the currency EUR in the DME file generated by the payment run instead I am getting the currency GBP.
As per the SEPA concept evey payment will be in EUR irrespective of the currency in which the invoice is raised. So please let me know what needs to be done to get the local currency EUR amount the DME file for the payment made against invoice raised in GBP...
Thanks in Advance..
Regards
Sanjeev

Need to generate a Index xml file for corresponding Report PDF file.

Need to generate a Index xml file for corresponding Report PDF file.
Currently in fusion we are generating a pdf file using given Rtf template and dataModal source through Ess BIPJobType.xml .
This is generating pdf successfully.
As per requirement from Oracle GSI team, they need index xml file of corresponding generated pdf file for their own business scenario.
Please see the following attached sample file .
PDf file : https://kix.oraclecorp.com/KIX/uploads1/Jan-2013/354962/docs/BPA_Print_Trx-_output.pdf
Index file : https://kix.oraclecorp.com/KIX/uploads1/Jan-2013/354962/docs/o39861053.out.idx.txt
In R12 ,
     We are doing this through java API call to FOProcessor and build the pdf. Here is sample snapshot :
     xmlStream = PrintInvoiceThread.generateXML(pCpContext, logFile, outFile, dbCon, list, aLog, debugFlag);
     OADocumentProcessor docProc = new OADocumentProcessor(xmlStream, tmpDir);
     docProc.process();
     PrintInvoiceThread :
          out.println("<?xml version=\"1.0\" encoding=\"UTF-8\" ?>");
               out.print("<xapi:requestset ");
               out.println("<xapi:filesystem output=\"" + outFile.getFileName() + "\"/>");
               out.println("<xapi:indexfile output=\"" + outFile.getFileName() + ".idx\">");
               out.println(" <totalpages>${VAR_TOTAL_PAGES}</totalpages>");
               out.println(" <totaldocuments>${VAR_TOTAL_DOCS}</totaldocuments>");
               out.println("</xapi:indexfile>");
               out.println("<xapi:document output-type=\"pdf\">");
out.println("<xapi:customcontents>");
XMLDocument idxDoc = new XMLDocument();
idxDoc.setEncoding("UTF-8");
((XMLElement)(generator.buildIndexItems(idxDoc, am, row)).getDocumentElement()).print(out);
idxDoc = null;
out.println("</xapi:customcontents>");
     In r12 we have a privilege to use page number variable through oracle.apps.xdo.batch.ControlFile
          public static final String VAR_BEGIN_PAGE = "${VAR_BEGIN_PAGE}";
          public static final String VAR_END_PAGE = "${VAR_END_PAGE}";
          public static final String VAR_TOTAL_DOCS = "${VAR_TOTAL_DOCS}";
          public static final String VAR_TOTAL_PAGES = "${VAR_TOTAL_PAGES}";
Is there any similar java library which do the same thing in fusion .
Note: I checked in the BIP doc http://docs.oracle.com/cd/E21764_01/bi.1111/e18863/javaapis.htm#CIHHDDEH
          Section 7.11.3.2 Invoking Processors with InputStream .
But this is not helping much to me. Is there any other document/view-let which covers these thing .
Appreciate any help/suggestions.
-anjani prasad
I have attached these java file in kixs : https://kix.oraclecorp.com/KIX/display.php?labelId=3755&articleId=354962
PrintInvoiceThread
InvoiceXmlBuilder
Control.java

You can find the steps here.
http://weblogic-wonders.com/weblogic/2009/11/29/plan-xml-usage-for-message-driven-bean/
http://weblogic-wonders.com/weblogic/2009/12/16/invalidation-interval-secs/

How to generate an XML file for an animation of IK armature

Can someone please tell me how to generate an XML file for an animation of IK armature.
I have a 5 keyframe/16 frame animation of a human character made up of a series of moveiclip symbols that is animated with an IK armature. I need the XML information from the animation.
When I go to Commands > Export Motion XML I get the error message "There is more than one object on frame 1" and then nothing happens.
Thank you,
c

I hope that's not the case. I want to write to adobe about it. I think it's a great feature and it functions really well even though it is not a very developed IK tool. My biggest issue with it is ouput options and integration with motion tweens.
I have seen a lot of examples of animators using it online, just no one talked about output. I just feel it hasn't been developed. It can generate a sprite sheet but only for a single pose frame of the animation, and not all the key frames or pose tweens. I find that functionality quite odd, as if adobe just forgot about IK when added in sprite sheets, etc. and the reason it half works is just an accident.

How to send the dynamically generated XML file to other site for further processing?

I have a question regarding exchanging data between two systems
using XSQL servlet. The situation is descrbed as the follows:
Assume that we have a simple XSQL page named "emp.xsql"
<?xml version="1.0"?>
<?-- XSQL page file "emp.xsql" -->
<xsql:query xmlns:xsql="urn:oracle-xsql" connection="demo" >
SELECT * FROM EMP
</xsql:query>
and we can access it through the HTTP request likes
http://web_server_name/xsql/emp.xsql.
Usually we will the returned dynamic XML file and show it on the
screen. Now the problem is that we don't want to show the
generated XML file on the calling screen. Instead, we want to
send the generated XML file to other website for further
processing, say, using JSP or ASP likes
http://other_web_server_name/XMLProcessing.jsp?.....
How can it be implemented using XSQL servlet?
Any hint and outline of the solution is appreciated.
Thanks

Ike,
Do you have a sample. I am searched so much in this forum for samples. I looked on SAX Parser. I did not find any samples.
Please help me.
Thank you for your posting.
Padma.

Form2xml generate xml files with "??????????" for non-latin characters

i used form2xml in oracle 10 g suit to convert forms 5 .fmb to .xml . using the command:
frmf2xml.bat OVERWRITE=YES myform.fmb
The forms contains arabic character set, but the xml file is generated with character "????????? " , and the xml file is unusable
what can i do to keep arabic characters in the generated xml files.
Edit:
I run form2xml on windows xp SP3 with arabic support (codepage =1256)
The xml file is generated as UTF-8

I resolved the problem.
step1: search in the registry for every NLS_Lang key and modify its value to codepage 1256 using regedit
step2: in control panel-Region and Language , I modified language to be Arabic
Now every thing is good

Where are the xml files for code generator of MSAHH5?

I'm generating source files for MSAHH5 and in the source code I can find xml files for generating all entities and DAL for those entities but I can't find anywhere files for MSATableConstants.xsl and MSAPersistanceManager.xsl and if I leave them alone they don't generate any class. I tried all xml in the code-generator folder without luck. What files should I use?
Thanks in advance.

Hi,
    I will answer your question in 2 parts.
1. Which files are used to generate what?????????
For entities:            Entity.xslt+ Entity.xml
For MSATablesContants:   MSATableConstants.xslt+
                         Entity.xml
For MSAPackageManager:   MSAPackageManager.xslt+
                         Entity.xml
For DAL Generation:      DAL.xslt+DAL.xml
2. Where these will be generated?????????
It depends on the path of the project that you are giving. If in the code generator tool when u make a new project give the path as the path of your project in eclipse.
Otherwise if you give path as ./ means the current folder from where you r running classgenerator.jar
you have to manually create folders like
C:\classgenerator\com\sap\crm\handheld\db\dataaccess for DAL classes and similarly for entities etc.
Hope this is clear
anubhav

How to generate XSD file for XML schema adobe form

Hi,
I want to generate XSD file for XML schema interfaces adobe forms. How can I do it. Where I can do it..or who will provide this file..
Thanks
Ram
Edited by: Ramesh ram on Feb 23, 2010 6:33 PM

Aaaaah, my mistake, sorry for that. Of course you should use the XML interface and I forgot it is not described in this tutorial. You can easily find another one where the XML based interface is used. But... you won´t need any tutorial. just create a WD context. Place a Interactive form element on your WD app screen, in the attributes you need to maintain the form template name. If you write a name suitable for you which no existing forms uses, the system will offer you to generate a XML based interface and right after that it will "send" you to the SFP transaction. That means you can like skipi the step defining the interface because it it is generated automatically and you only draw the layout for this generated interface.
You should use XMl based interface for your WD app, because when using the ABAP dic based, some features are not available (I am not sure, but ABAP based works only for print form or something).
Hope it is all clear now,
have a nice day,
Otto

Error while generating XML file through RDF

Hi,
I wanted to generate a Report on some business case. For that I need to generate XML file first.
For generating XML file
1. I have built an RDF through Reports builder.
2. Saved the report to local machine with extension .rdf
3. Moved it to appltop/app/reports/US directory
4. Registered tha Report with Executable of type Oracle Reports
5. Defined Concurrent Program with OUTPUT as XML.
When I submmitted the program, it was giving an error as follows.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
A semi colon character was expected. Error processing resource 'https://oaphrd.humana.com/OA_CGI/FNDWRR.exe?temp_id=2088989...
+<?xml version="1.0" encoding="&Encoding"?>+
But, when I tried to sane the report directly to a file (file - > generate file -> XML) the XML was generated successfully.
How to get rid of this. Some one please help me out.
Thanks !
Edited by: Rajasekhar Reddy on May 4, 2012 1:23 AM

Hi,
I found the issue and corrected it. :)
This was happened only because of the Version problem of Report Builder with Oracle Applications.
Reports Builder 10g is not compatiblie with Oracle Applications 11.5.10.
Oracle 11.5+ will always expect the RDF from Reports 6i version. Because of this, the endocing was damaged.
You can observe in the earlier post as encoding="&Endoding". Here +&Encoding should be replaced by some encoding mechanism like "UTF-8".+
Finally corrected the version and got the Output as expected.
Thanks !

Error while generating XML file from rdf report.

Hi All,
we are having a rdf report that displays images retrieved from data base. I need to convert this report to xml report(using rtf template).
when i tried to run the report after changing the output of the concurrent program to "XML", i am getting the below error.
REP-1295: Data format of column 'PK1_VALUE' is unsupported.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1295: Data format of column 'PK1_VALUE' is unsupported.
images are stored in BLOB type columns.
Can anyone help me on this..
thanks
gtungala

Hi Hussein,
Thank you for the reply.. i was sure that i will get correct response with in a day..
you people made this as one of the best technical forums..no doubt in that..
need some more help from you...!
The metalink docs say that it is not possible to generate xml file as the image is BLOB.
Can you please tell me any solution for developing xml template(rtf) which can display images that are stored in data base BLOB columns. Even PL/SQL script will do.. I have tried with changing the BLOB to CLOB in rdf query(by calling a function that converts BLOB to CLOB). it didnt help.
thanks in advance..
gtungala

Generating XML file from WORD file

hello
Everyboby.
I am trying to generate xml file from a word file.
but i am stucked with how to do it? any kind of help will be useful.
i think for doing this work i have to develop XSD file, because when i am creating the xml file, the hidden space within the word file is not catched.
please help me out.
waiting for reply
thanks
milind

hello
after searching on the net i came to know that org.apache.poi.hwpf.* is used for reading word file and its contents. for converting it to xml i have to use org.exolab.castor.xml.*
now my problem is that POI is in its early beta version and there is no help or any sample examples for understanding the api.
so if you have any idea regarding it, please write to me.
waiting for your reply.
thanks
Milind

How to create an XML File for Gantt?

Hi Everybody.
I need a Gantt in Web Dynpro ABAP. I need it for the boss to do a Forecast for Vacation. I Hope this is understanding.
Did Anyone know how can i create a XML File for the Gantt at runtime?
Thanks
MSi

Hi Marcus,
the following link is to the JNet/JGantt developer doco
[JNet/JGantt Developer Documentation|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/lw/uuid/f010ec31-9658-2910-3c83-c6e62904eceb]
included in this is the:
[Schema for XML|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/lw/webdynpro/jnet_jgantt%20developer%20documentation/schema/xml-spy/jnet-schema.html]
You can use this to build XML to represent a gantt like chart.
I did this to build XML to represent employee avaliablity - although we fronted the gantt through WD Java not ABAP - the java applet called is the same (I believe).
Don't underestimate the work required to tweek your data into a decent layout. It took me days.
There may be tools/api to help generate the XML - I don't know of them - I'd look forward to seeing any other replies to this thread from people who have used/built any. An example of a class that generates JNet XML - CL_SPI_UI_JNET - but this does not seem to be a Gantt display.
Cheers,
Chris

Java code to generate XML File from XML Schema

Hi I need this asap... "Java code to generate XML File from XML Schema i.e XML Schema Definition, XSD file".
Thankz in advance...

JAXB has been available as an early release download for some time. There are also XML Binding packages available from Borland (JBuilder) and Castor. These tools create Java classes from a source document, xml,dtd etc. You can use these classes to marshal-unmarshal XML documents.
Dave

Generate XML file for payroll result

Similar Messages

Maybe you are looking for