Aperture tools not responding

All of a sudden my tool (ie stamp tool, cropping tool,etc) are not responding.
Help!

I should have specified that I had aperture, not aperture 2, so sadly the "p" key did not work

Similar Messages

  • Adobe Reader XI - commenting tool not responding

    Every time I attempt to use the commenting tool and/or the markup tool in this version - - it takes several minutes to respond. The error mesage "Adobe reader not responding" continues to dislay for about 90 seconds.  I am using Windows 8 . . is there a solution?

    Hello,
    Please try with our latest patch release - http://www.adobe.com/support/downloads/product.jsp?platform=windows&product=10
    ~Deepak

  • Aperture 2 not responding

    Aperture 2 keeps reporting that it is not responding. This usually happens after it has been running for a while and I am making adjustments other than the most basic. The CPU is maxing out and fans start to run full blast and the spinning ball last as much as 20 seconds.
    If say I grab the monochrome red slider and slide backwards and forwards it will move smoothly and the screen will update quickly and all is well. However things go wrong if I move the slider slightly, let go and then move again and maybe once more, the whole not responding, fans and spinning ball start off.
    I have generate previews turned off. I cannot believe a 15" Intel MBP 2.16, 3G RAM is not good enough to run this. There must be a problem with Aperture. All other programs run perfectly, Lightroom, CS3 etc. Any ideas please.
    http://idisk.mac.com/ianrmatthews-Public?view=web

    Yes this is happening to me on both my Mac's. I'm running an MBP C2D and an iMac 2.16 GHz...It's depressing because I love Aperture's workflow; but I don't love the terrible system slow-downs. Yesterday I got the spinning beachball and full fans for 30 minutes (I left my MBP on my desk and went out on a quick errand, hoping that it would have finished whatever it was doing). The system locked up completely after I got back (I think it's bitter-sweet that in two years, the only application that has ever caused my apple computer to completely lock-up...is an apple software product). I
    'd hoped that with 2.0 they would have improved the performance problems, but it looks like Aperture is still an overly resource-intensive dog. Until the developpers can reign in the performance issues and "truly" bring this bad boy up to speed, I'm going to have to stick to Lightroom—which ***** because Adobe's outrageous prices p!$$ me off

  • Time remap tool not responding

    For some reason I can't use my Time remap tool. I select it and nothing happens. Does anyone have any answers?
    John

    Bogiesan,
    Yes I have done the tutorials and have used the time remap tool before. I'm certified pro level one. I have not used the tool outside of the advanced Apple Pro Training series. I'm actually using the pages in the DigitalFilm Tree (P.179-180) as a guide for my own stuff and it is the only tool on the palette that will not respond to the click of the mouse.

  • HT5148 Protranscoder Tool not responding. What is the problem and how can I resolve the issue?

    Why is the Protranscoer Tool always show not responding? I see the CPU is almost full when I am sharing to Blue Ray or Master File, and it shows the Protranscoder tool and the QTKit server not responding.

    Did you ever figure this out? I have the same problem.

  • Aperture 3 not responding.

    After this one update, I forgot the exact name of the update, the one about the RAM usage of PRO applications; Aperture just suddenly stops responding and I can't do anything with my libraries. I tried uninstalling and reinstalling but the same thing happens. I can open Aperture, can have a peek at all my projects, albums and folders, but then the beach ball of death arrives and there's nothing that I can do.
    Anyone who knows a way around this?

    I forgot that would do it too. I trashed the whole app in a rush - with appcleaner - and downloaded it again.
    But deleting the plist file should be doing it for most people. (how could I not think about that)
    On second thought, I experience still the same like before.
    Message was edited by: Kevin Paquet

  • Why is my direct selection tool not responding?

    I have Creative suit 5.5 upgraded last year but cannot use ID as a couple of the application tools including direct selection tool just dfont respond. Any ideas?

    Thank you. Please see InDesign tools and panels don't respond to mouse clicks (Windows 7/Vista)
    If you have large fonts enabled in Windows 7 interface customization you cannot run an Aero theme with ID. You can leave the large fonts and use a classic theme, or return the font size to normal and keep the Aero theme.
    The symptoms of this problem are not always restricted to the article description.

  • Text Tool not Responding

    I'm just getting a horizontal line when I try to type a letter in Photoshop CS6.  No Brush Presets it seems. I was previously Painting in PS CS6.
    I use Apple  OS X Ver 10.8. 
    How do I fix it?  I'm not sure I'm in the right Forum but any help will be appreciated
    MJ

    Is the type tool set to the same colour as the background?  Is the text size tiny?  Try OKing your line of text, and using Free Transform to enlarge it.
    To do it properly, oepn your image size panel and see what the linear dimesions of the image are.  If it is something daft like ten miles by 8 miles, and the DPI is set to 1, uncheck resample and change the dpi to something like 300.  
    I like to set preferences so that type size defaults to milimetres (or inches).  That way I can predict how big type will appear on an image document.

  • Illustrator CC2014 zoom and eyedropper tools not responding correctly?

    Ever since the upgrade, I'm not able to control these functions as I have in the past, using Option + zoom and Option + eyedropper turns the tool into the hand.  Any ideas?

    Try re-assigning a keyboard shortcut for the zoom in, but this time try to assign the plus sign at the right hand side of the keyboard not the one next to the backspace.

  • Tool Box tools not responding

    hi,
    I have a Deskjet F4280 all in one
    lab top is running on windows 7
    the error is saying "The computer is unable to establish two way communication with the device
    N/A
    The labtop is a sony viao, ive made three updates on hp solution centre for the printer but still having the error

    Sorry that you are having a problem with the communication error. 
    Try to uninstall and re-install the software and drivers. 
    Let me know what happens after it installs. 
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • Trying to move aperture library from USB external drive to FW 800 external drive.i can see the projects but no thumbnails. Error application not responding. Verified permissions before started. It's been 3hours. Recommendations please

    I have consolidated iPhoto into aperture 3.2.2  and now have both aperture and iPhoto put consolidated library on 2.0 USB external drive. Have been removing duplicate photos from 23,000 down to 15,000. Problem in trying to close aperture and now tried to move library from 2.0 USB to 800FW and can see projects but no thumbnails. Aperture error now reads not responding. Can I repair library on 2.0 at this point? 

    Sharon,
    did you do anything else besides copying your library to a fire wire drive after your last post                                                                            Aperture not responding                     ?
    Since that library probalbly already needed fixing, I'd recommend to force quit Aperture and use the "First Aid" to repair your Library.
    Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
    Regards
    Léonie

  • All photoshop cs4 tools are not responding. how do I get them to work, again?

    all photoshop cs4 tools are not responding. how do I get them to work, again?

    Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance, font validation, etc.)?

  • PSE 9 Lasso tool - "Photo not responding"

    I googled this before coming to the forum here.  Apparently this is a problem for quite a few people with PSE 9.  I was using PSE 8 on a trial, and I had no problems, no glitches.  I can't buy a serial number for PSE 8, so I buy 9.  The ONLY thing I need to be able to do with elements is cut out portions from my images.  I only know how to do this with the lasso tool.  Yet there appears to be a glitch with at least the download version of PSE 9.
    What happens in PSE 9: with the standard lasso tool, I start to lasso the portion of the image - and after a few seconds the lasso line disappears, the screen drops down in order to create a line at the top of the screen that says "Photo Not Responding."  Apart from the really annoying jog in the lasso now, I can no longer see the line, so have to lasso blind.  It will continue to lasso - I just now have to do it without seeing anything and hope that when my screen dropped down I was at a portion of the picture that needed a straight line.  This is amazingly frustrating.
    Anyone know how to solve this problem?
    The only solution I've found is one I don't understand.  The user says:
    "I was running the files from my NAS and elements does not load the whole photo into memory but runs from its primary location. As soon as this was copied locally the "non responding" was eliminated."   ????   I have no idea what NAS is.  What I do is open a picture from a folder in my pictures library on my computer.
    And I know it's not a problem with RAM - PSE 8 worked just fine.
    Thanks.

    I have the same problem...about 98% of the time I use that lasso tool....I havent noticed if its the same photo that isnt responding...it seems to "jump" or something and it appears another photo is in the background behind the editor workspace....
    If you figure it out  I'd like to know how...blind lassoing is no fun lol....

  • Photoshop Elements 13 does not respond to editing tools

    Photoshop Elements 13 does not respond to editing tools.  I have a MAC.  Any suggestions?

    Reset the tools or reset preferences.
    What version of operating system?

  • When i click on text tool the photoshop CS5 not responding

    hey guys
    i have problem in photoshop CS5
    that is when i click on text tool the photoshop not responding and i cann't do anything when i click on text tool the photoshop not responding and when i want to close photoshop i just have one way it's from task .
    so how can i solved this problem because my all work on the photoshop it's texts please help me and thank you so much adobe

    Select the Text Tool
    Then right click on its' icon in the Option bar.
    Select "Reset Tool" from the pop-up menu.
    Any questions, get back to me.
    Gene

Maybe you are looking for

  • How can I get my brush size to appear in Photoshop CC?

    I just upgraded to Photoshop CC and I cannot see my brush size, especially when I make the brush size larger.  A small circle appears when the brush is very small, but at larger sizes it disappears such that I have to guess at my brush size, which do

  • Adobe Acrobat 7.0 Activation problem

    I'm trying to install Adobe Acrobat 7.0 Standard.  I purchased the original product several years ago and installed it on a personal laptop (Windows XP) in order to work from home.  The XP laptop has died and I'm trying to reinsatall Acrobat from the

  • Why are random spaces being inserted in text on Acrobat Pro 9?

    My apologies if this has been asked & answered before. I did try and search and found some information but I still do not understand the complete picture. I am a relatively new user to Acrobat and used 7 prior to upgrading to Pro 9 recently.  I am us

  • Photoshop Elements 13 for Mac

    I have an old version of Photoshop Elements (8) for Mac. I have installed this version 8 on a iMac and a Macbook. Can I install version 13 (the 1 license version) also on my iMac and Macbook and use it alternate?

  • Web Clipping Provider Configuration problem

    Hi, I have installed the PDKv2 and deployed it using the OC4J OEM steps. I have installed Portal Tools also, the test page is working. I want to configure the web clipping provider, I click on the link "Web Clipping Provider" and I get this message: