APEX : HOW to PLOT XY (LINE plot) from different table.

Table T1 (plot col1 for x -axis), Table T2 (plot col2 on yaxis)
with equal number of record on both table
without join these two table

Hi,
The question relating to reading Matlab mat file is beyond the scope of windows form genreal forum , you might need to try mathworks forum:
http://www.mathworks.com/matlabcentral/
Here is a link should be help you:
http://www.mathworks.com/matlabcentral/answers/98947-is-it-possible-to-read-write-mat-files-from-a-c-application
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

How to get only column names from different tables as single table columns

Hi All,
I have one requirement in which we want only column names from different tables.
for example :
I have three tables T1 ,T2, T3 having
col1 clo2 clo3 --> T1 ,
col3 col5 ,clo6 --> T2 ,
Clo6 col8 col9 --> T3
columns i want to get only all Column names from all table as single Resultset not any data from that how can i get that empty resultset
because this empty result i want to bind in datagridview(front end) as Empty resultset
Please tell me anyways to do this
Niraj Sevalkar

If I understand you want an empty result set, just with metadata. SET FMTONLY do the trick:
SET FMTONLY ON
SELECT Col1, Col2, Col3, ....., Coln
FROM
T1 CROSS JOIN T2 CROSS JOIN T3
SET FMTONLY OFF
Another alternative is to include an imposible contition
SELECT Col1, Col2, Col3, ....., Coln
FROM
T1 CROSS JOIN T2 CROSS JOIN T3
WHERE 1 = 0
If you are using a SqlDataAdapter in your client application. You can use the FillSchema method. the select command may be any select statement that returns the columns you want. Under the covers FillSchema will call SET FMTONLY ON.
If you are using SqlCommand.ExecuteReader you can pass SchemaOnly to CommandBehavior argument. SET FMTONLY ON is called under the covers. Again the select command may be any select statement that returns the columns you want.
"No darás tropezón ni desatino que no te haga adelantar camino" Bernardo Balbuena

How to delete a line item from the sales order

Hi all,
how to delete a line item from the sales order for which the production is already happened and it has been delivered. the production order status is DLV.
Regards
Kumar

Hi
U can do this in two ways one u can short close the order by entering Reason for rejection in VA02 at header level and if yr order is multiple line item order u can enter the reason for rejection in any of the line item which u don't want to deliver.
This is called short close ( as the qty is not delivered fully).
Thx.

How to delete the line item from a sales order

Hi all,
how to delete a line item from the sales order for which the production is already happened and it has been delivered. the production order status is DLV.
Regards
Kumar

Hi Kumar,
I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
Regards,
Rachel

Considering a Macbook pro 13". want to use garage band - how do i run line in from my guitar. There is not a mic/line input that I can see in specs.

Considering buying a Macbook pro 13". Want to use garage band - how do i run line in from my guitar. There is not a mic/line input that I can see in specs.

Simple. GarageBand question, GarageBand forum where all those users are jacked into their Macs and can tell you how. Also look to the right of your post to the column, "More Like This."---------------------------------------------->
https://discussions.apple.com/community/ilife/garageband

How to remove new line character from query output?

Hi,
How to remove new line character from query output?
have tried select replace(column_name, CHR(10), ' ') from table_name.
Edited by: GreenHorn on Sep 11, 2008 12:53 AM

Please consider, that windows uses a sequence of chr13||chr(10) Unix uses only one character chr(10).
The new line character(s) may be OS-dependent.
You could consider both with:
replace(replace(column_name, CHR(13)||CHR(10), ' '),CHR(10),' ')
Hartmut
Edited by: hartmutm on 11.09.2008 01:32

How do I get line preview from Source monitor using Axio?

Any ideas on how I get a line preview from the source monitor on my Axio (the "full blwn" Axio, not the LE)

In CS4, go to Edit > Preferences > Player Settings, and in the Default Player drop-down, choose the Matrox player.

How to list all the rows from the table VBAK

Friends ,
How to list all the rows from the table VBAK.select query and the output list is appreciated.

Hi,
IF you want to select all the rows for VBAK-
Write-
Data:itab type table of VBAK,
wa like line of itab.
SELECT * FROM VBAK into table itab.
Itab is the internal table with type VBAK.
Loop at itab into wa.
Write: wa-field1,
endloop.

How to delete the duplicate data from PSA Table

Dear All,
How to delete the duplicate data from PSA Table, I have the purchase cube and I am getting the data from Item data source.
In PSA table, I found the some cancellation records for that particular records quantity would be negative for the same record value would be positive.
Due to this reason the quantity is updated to target but the values would summarized and got the summarized value of all normal and cancellation .
Please let me know the solution how to delete the data while updating to the target.
Thanks
Regards,
Sai

Hi,
in deleting the records in PSA table difficult and how many you will the delete.
you can achieve the different ways.
1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
3.you can restrict the cancellation records at query level.
Thanks,
Phani.

How can i convert the data from mutiple-table to the other database(MSSQL)?

Dears,
How can i convert the data from mutiple-table to the other database such as MS-SQL?
I have a third party system based on MS-SQL 2000.
Now we want to make a integration between SAP R/3(Oracle) and SQL server.
When my user releases the purchase order in R/3, the application we coded will convert the releated data to the temp database on the SQL server.
But i don't know which tools will help me reach the purpose. BAPI, LSMW, IDoc... ???
Would anybody tell me which way is better and how to do?
Thanks a lot!
Kevin Wang

Hello Kevin,
The question to use which method depend on your detail requirements. If you use BAPI, you need to find which Bapi can provide the data you want. Bapi normally use as a function called by external system. So you need to develop an external program like VB/Java to call this Bapi and move it to SQL. LSMW is use when you want to upload data from an external system to SAP. So it does not serve your requirement. Idoc can be use to export data to an external system. Again like Bapi, you need to find what Idoc can provide the data you want. However, it does not any programming from the external system. If I were you, based on your requirements, I think writing an Abap program that read the data you want and download it to NT/SQL server will be faster and easier.

How to display multiple data from different table in one table? please help

Hi
I got sun java studio creator 2(the separate installation not the one in the net beans)....
My question is about displaying data that have been taken from the database.... I know how to display data in a table(just click on the table "bind data" )... but my question is that:
when i want to use a sql statement that taken the data from different table...
how can i display that data in the table(that will be shown in the web) ??? when i click bind data on the table i can only select one table i can't select more than one....
Note:
1) i'm using the rowset for displaying the data in the table, since the sql statement is depending on a condition(i.e. select a from b where c= ? )...
2) i mean by different table is that( i.e. select a from table1,table2 )..
thanks in advance...

Hi,
937440 wrote:
Hi every one, this is my first post in this portal. Welcome to the forum!
Be sure to read the forum FAQ {message:id=9360002}
I want display the details of emp table.. for that I am using this SQL statement.
select * from emp where mgr=nvl(:mgr,mgr);
when I give the input as 7698 it is displaying the corresponding records... and also when I won't give any input then it is displaying all the records except the mgr with null values.
1)I want to display all the records when I won't give any input including nulls
2)I want to display all the records who's mgr is null
Is there any way to incorporate to include all these in a single query..It's a little unclear what you're asking.
The following query always includes rows where mgr is NULL, and when the bind variable :mgr is NULL, it displays all rows:
SELECT *
FROM     emp
WHERE     LNNVL (mgr != :mgr)
;That is, when :mgr = 7698, it displays 6 rows, and when :mgr is NULL it displays 14 rows (assuming you're using the Oracle-supplied scott.emp table).
The following query includes rows where mgr is NULL only when the bind variable :mgr is NULL, in which case it displays all rows:
SELECT     *
FROM     emp
WHERE     :mgr     = mgr
OR      :mgr      IS NULL
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL it displays 14 rows.
The following query includes rows where mgr is NULL only when the bind variab;e :mgr is NULL, in which case it displays only the rows where mgr is NULL. That is, it treats NULL as a value:
SELECT     *
FROM     emp
WHERE     DECODE ( mgr
            , :mgr, 'OK'
            )     = 'OK'
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL, it displays 1 row.

How to do a SELECT from different tables into an internal table?

How to do a SELECT from different tables into an internal table?
I want to select data from MARA, MARC and ZPERSON and populate my ITAB_FINAL
REPORT zinternal_table.
TABLES:
mara,
marc,
zperson.
TYPES:
BEGIN OF str_table1,
v_name LIKE zperson-zname,
v_matnr LIKE marc-matnr,
v_emarc LIKE marc-emarc,
v_werks_d LIKE marc-werks_d,
v_dstat LIKE marc-dstat,
END OF str_table,
i_table1 TYPE STANDARD TABLE OF str_table1.
DATA:
BEGIN OF str_table2,
v_mandt LIKE mara-mandt,
v_ernam LIKE mara-ernam,
v_laeda LIKE mara-laeda,
END OF str_table2,
itab_final LIKE STANDARD TABLE OF str_table2.

first find the link between mara , marc and zperson , if u have link to 3 tables then u can jus write a join and populate the table u want ( thats final table with all the fields).
u defenitely have alink between mara and marc so join them and retrieve all data into one internal table.
then for all the entries in that internal table retrieve data from zperson into another internal table.
then loop at one internal table
read another internal table where key equals in both the tables.
finally assign fileds if sy-subrc = 0.
gs_finaltable-matnr = gs_table-matnr
etc...
and finally append gs_finaltable to gt_finaltable.
there u go ur final table has all the data u want.
regards
Edited by: BrightSide on Apr 2, 2009 3:49 PM

How to merge two search button from different criteria

How to merge two search button from different criteria
this image show the question
http://s24.postimg.org/4algthuj9/1111.jpg
two different criteria for the same view and I need to merge it in one button as when I click
on the button search result give from two criteria parameters

You can!t using af:query. the af:query component comes as is. If you can't do it through the properties, you probably can't do it at all.
As in your other thread, the way to go is to program your own search form. This way you can use a layout and functionality you like.
For this you create a form with input fields for the values you are searching for, put them on hte page in a way you like and in the end by hitting on a button (e.g. called Search) map all inputfields to parameters of a service method you defined in your application module or VO. This service method then executes a view criteria returning all matches in the default iterator (just as if you had used af:query.
Timo

How to refresh Java service facade from entities tables

Hi Everyone,
somebody of you guys know how How to refresh Java service facade from entities tables. from oracle jdeveloper 11g.
my tools are:
Toplink
Adf
Java Service Facade.
thanx

Hi,
sounds what you want is to wag the dog with the tail. What is the use case you want to implement? Do you want to refresh a collection in response to RDBMS changes ? If so then Active Data Services is an option. However, your question is not well asked and I am already spending more time in answering your question than you spent writing it
Frank

How to get second maximum salary from employee table(sql query)

how to get second maximum salary from employee table(sql query)

dude there is no matter of structure .........that user already said its from employee table ...............its basic table in sql and there is no need to specify the table structure
.........i think u got my point I think you are the one who didn't understand Sarma's point.
Give a man a fish and you feed him once. Teach a man how to fish and you feed him a life long.
>
and the query is
select max(sal) from emp where sal<(select max(sal)
from emp);
this will give the 2nd max salary from the emp tableBtw: You solution is bad, because it needs to scan and sort the table emp twice. And a better solution has been given already.
Message was edited by:
Sven W. - reordered statements

APEX : HOW to PLOT XY (LINE plot) from different table.

Similar Messages

Maybe you are looking for