APEX Sequence number when passing data from different instances

Hello there,
I have a question for you guys.
I have an application sitting in my Production area, and the one in test needs to be up-to-date (the data). So I grab the excel file, truncate the table in my test area and load the table from prod into the one in TEST.
The problem with this is that when I tried to insert a record to the table it gave me the unique constrain error. Because the sequence for the table in test next number is 500 and the last number (primary key) in PROD is 10,000.
I tried to change that number in APEX but it won't alow me to. The only thing I can change is the minimum and the maximum value.
Can I change the min to 10,001 so it can now start fro there or what would you recommend to shance the last sequence number of the table to 10,001?
Regards,
Ruben Tapia

Hi,
Copy your sequence SQL e.g. to notepad. Drop that sequence.
Edit SQL in notepad by changing number after START WITH to be 10001.
Then just recreate sequence from your edited SQL =)
Br,Jari

Similar Messages

How to find port number , when there will be different instance number ?

In case of portal url,
port number is 50000 for default instance number 00.
how to find port number , when there will be different instance number , instead of 00?
Thanks

Hi
You can find the port number by your instance number as follows:
There is a general format for the port number like you have mentioned.
For 00 instance the port number is 50000.
The general format for the port number goes like this:
5<instance_no>00
If your instance number is 01 then the port number would be 50100.
It depends on the installation type which you perform.
You can also change the instance number during the installation but normally you dont do this.
If you have many components or units installed on your system you may have more than one instance in that case it may go like this 00, 01, 02....accordingly port number will be 50000, 50100, 50200...resp.
Hope this solves your doubt.
If you need some more clarification please lemme know.
Regards
Sumit Jain
**Rewrd with points if useful.

Error when passing data from app server...

Hello Experts,
I am encountering an error when trying to pass data from application server
to my internal table. Below is the error:
"You cannot convert the character set"
Hope you can help me guys.Thank you and take care!

Hi ,
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures. The code is base on uploading a simple txt file.
REPORT zuploadtab                    .
PARAMETERS: p_infile LIKE rlgrap-filename
                        OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
    name1 like pa0002-VORNA,
    name2 like pa0002-name2,
    age   type i,
    END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
      wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
    CLEAR: wa_string, wa_uploadtxt.
    READ DATASET ld_file INTO wa_string.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                      wa_uploadtxt-name2
                                      wa_uploadtxt-age.
      MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
      APPEND wa_upload TO it_record.
    ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
    write:/     sy-vline,
           (10) wa_record-name1, sy-vline,
           (10) wa_record-name2, sy-vline,
           (10) wa_record-age, sy-vline.
endloop.
Reward points if it is usefull ..
Girish

Error passing data from ODS to IC

Hi,
I have a problem when passing data from ODS to Infocube. According to the messages, the problem is there is erroneous characters in one record's ZANLAGE characteristic. I check and found the problematic record. Mi question is Why the problem showed up when passing data from ODS to IC instead of when passing data from Infosource to ODS? I check de ODS and the problematic record is in: "       " (hex.). How this characteristic value entered in the ODS correctly, but it can not enter the IC??
Mauricio

Hi,
I check the ODS settings and the BEx option is not checked. This may explain whay the problem showed up passig from ODS to IC and not before.
What should I do to catch the problem and pass the data from the ODS to the IC?
My problem is how to identify this record, can I use:
if ZANLAGE = "       "
ZANLAGE = "XXXXXX".
end if.
Remember that "       " is Hex. code!!.
regards
Mauricio

Passing data from JavaScript to Applets (Error when trying to pass data)

Hi,
I've wrote a small applet for lists but when I try to pass data from my
JavaScript to my applet, I get an "Error: Object doesn't support this property or method". I get this error with a select other sites including the page I'm writing, leading me to believe I may not have installed requried files or set required options. I've included the listing of the code snippet where the error occurs.
document.listApplet.testMethod()OR when I use:
document.applet(listApplet).testMethod()The applet is loaded by this statement:
<OBJECT CODE="CustomAppletList" NAME="listApplet" ID="listApplet" WIDTH="1000" HEIGHT="600"></OBJECT>and loads fine but no data is passed through it's public methods. Can anyone suggest ideas how I can successfully pass data from my JavaScripts to my applets?
Devyn

this should work for you. In your javascript do this.
var myApplet=document.listApplet;
myApplet.testMethod()
If you need more help let me know.
Paul

How to pass data from one internal session to another

Hi SAP Experts,
How to pass data from one internal session to another and from One external session to another external session. I used import and export parmeter and SPA/GPA parameters. What is the other way to pass data?
Please tel me urgently
Thank you
Basu

Memory Structures of an ABAP Program
In the Overview of the R/3 Basis System you have seen that each user can open up to six R/3 windows in a single SAPgui session. Each of these windows corresponds to a session on the application server with its own area of shared memory.
The first application program that you start in a session opens an internal session within the main session. The internal session has a memory area that contains the ABAP program and its associated data. When the program calls external routines (methods, subroutines or function modules) their main program and working data are also loaded into the memory area of the internal session.
Only one internal session is ever active. If the active application program calls a further application program, the system opens another internal session. Here, there are two possible cases: If the second program does not return control to the calling program when it has finished running, the called program replaces the calling program in the internal session. The contents of the memory of the calling program are deleted. If the second program does return control to the calling program when it has finished running, the session of the called program is not deleted. Instead, it becomes inactive, and its memory contents are placed on a stack.
The memory area of each session contains an area called ABAP memory. ABAP memory is available to all internal sessions. ABAP programs can use the EXPORT and IMPORT statements to access it. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
All ABAP programs can also access the SAP memory. This is a memory area to which all sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters are often used to preassign values to input fields. You can set them individually for users, or globally according to the flow of an application program. SAP memory is the only connection between the different sessions within a SAPgui.
The following diagram shows how an application program accesses the different areas within shared memory:
In the diagram, an ABAP program is active in the second internal session of the first main session. It can access the memory of its own internal session, ABAP memory and SAP memory. The program in the first internal session has called the program which is currently active, and its own data is currently inactive on the stack. If the program currently active calls another program but will itself carry on once that program has finished running, the new program will be activated in a third internal session.
Data Clusters in ABAP Memory
You can store data clusters in ABAP memory. ABAP memory is a memory area within the internal session (roll area) of an ABAP program and any other program called from it using CALL TRANSACTION or SUBMIT.
ABAP memory is independent of the ABAP program or program module from which it was generated. In other words, an object saved in ABAP memory can be read from any other ABAP program in the same call chain. ABAP memory is not the same as the cross-transaction global SAP memory. For further information, refer to Passing Data Between Programs.
This allows you to pass data from one module to another over several levels of the program hierarchy. For example, you can pass data
From an executable program (report) to another executable program called using SUBMIT.
From a transaction to an executable program (report).
Between dialog modules.
From a program to a function module.
and so on.
The contents of the memory are released when you leave the transaction.
To save data objects in ABAP memory, use the statement EXPORT TO MEMORY.
Saving Data Objects in Memory
To read data objects from memory, use the statement IMPORT FROM MEMORY.
Reading Data Objects from Memory
To delete data clusters from memory, use the statement FREE MEMORY.
Deleting Data Clusters from Memory
please read this which provide more idea about memory
Message was edited by:
sunil kumar

InfoCube Modelling-Adding data from different ODS's on to the Infocube

Hi Experts,
I am new to SAP BI. I have a basic doubt on Modelling the InfoCube.
In our requirement, I have to populate data from 9 custom SAP Tables on to 9 ODS's. And, then take these data on to Infocubes.
And, they want to reduce the number of cubes as much as possible. So, I have to combine the data from different ODS's and build 2-3 Infocubes.
For Example.
I am going to combine 5 ODS's data on to 1 CUBE based on Delivery number...
there are 5 ODS with common key Delivery number. And, suppose I have added some set of fields from ODS1.
And, now when I add other set of fields from the second ODS, WHAT WILL HAPPEN TO THE 'Delivery Number' field ??
I will make it clear.
I have a record in CUBE already containing Fields- : Delivery no, field_a, field_b, field_c, field_d. Where the 'Delivery no =112333'. This record comes from ODS1.
Now, I want to add data data from ODS2, containg fields -: Delivery no, field_e, field_f, field_g, field_h.
And, what happens to the already existing record in CUBE with 'Delivery no = 11233'. ?
Will the value in this info-object get overwritten ?
OR.. will it combine the data from both the ODS's and show it as ONE record ???
Please advice ... How will I solve this scenario ?
Thanking You in Advance
Shyne Sasimohanan

Answer for your question and the suggestion.
the data will look like as given below
Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
11233           1           1           1          1            0           0            0            0
11233          0           0          0             0           1           1           1          1
but the best way, according the design standards is creating another DSO on the top of all the DSO's and combine all the data in that DSO and send the data to Infocube. then the data will be shown as below.
Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
11233           1           1           1          1            1           1           1          1
Regards,
Siva A

Script fails when passing values from pl/sql to unix variable

Script fails when passing values from pl/sql to unix variable
Dear All,
I am Automating STATSPACK reporting by modifying the sprepins.sql script.
Using DBMS_JOB I take the snap of the database and at the end of the day the cron job creates the statspack report and emails it to me.
I am storing the snapshot ids in the database and when running the report picking up the recent ids(begin snap and end snap).
From the sprepins.sql script
variable bid number;
variable eid number;
begin
select begin_snap into :bid from db_snap;
select end_snap into :eid from db_snap;
end;
This fails with the following error:
DB Name DB Id Instance Inst Num Release Cluster Host
RDMDEVL 3576140228 RDMDEVL 1 9.2.0.4.0 NO ibm-rdm
:ela := ;
ERROR at line 4:
ORA-06550: line 4, column 17:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
The symbol "null" was substituted for ";" to continue.
ORA-06550: line 6, column 16:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev su
But when I change the select statements below the report runs successfully.
variable bid number;
variable eid number;
begin
select '46' into :bid from db_snap;
select '47' into :eid from db_snap;
end;
Even changing the select statements to:
select TO_CHAR(begin_snap) into :bid from db_snap;
select TO_CHAR(end_snap) into :eid from db_snap;
Does not help.
Please Help.
TIA,
Nischal

Hi,
could it be the begin_ and end_ Colums of your query?
Seems SQL*PLUS hs parsing problems?
try to fetch another column from that table
and see if the error raises again.
Karl

Data from different databases in the same report.

Hi Everyone,
I am trying to build a reconciliation report in which I need to show the data from the source and target, side by side.
Source and target are both different databases, although being oracle only
Whenever a new data model is created, it gets attached to a data source and in the report we need to choose a specific data model.
Can we have data from different databases in the same report ?

Yes, it is possible.
One way Is to use dataTemplates. There you can make queries from any number of different databases (The max I have done is 5).
It looks something like that:
<dataTemplate name="NameOfTemplate">
<dataQuery>
 <sqlStatement name="Q1" dataSourceRef="Connection1">
 <![CDATA[ select * from table1]]>
 </sqlStatement>
 <sqlStatement name="Q2" dataSourceRef="Connection2">
 <![CDATA[ select * from table2]]>
 </sqlStatement>
</dataQuery>
<dataStructure>
 <group name="RESULT1" source="Q1">
 <element name="P_FIRST_NAME" value="P_FIRST_NAME"/>
 </group>
 <group name="RESULT2" source="Q2">
 <element name="P_DATE" value="P_DATE"/>
 </group>
</dataStructure>
</dataTemplate>dataStructure is very important when you get data from different places, if you don't define those elements, then only the result from Q1 is shown.
The second possible way is to make as two different data models, each containing their own query and then set Main Data Set as concatenated SQL Data Source.
Best of luck,
Evelyn

Problem in passing data from 1 screen to another using BBP_DOC_CHANGE_BADI.

Hi Experts,
i am new to the SRM, i am facing problem in passing data from one screen to another.
my requirement is that when we select one shopping cart and press the PROPOSE SOURCES OF SUPPLY button, we will fetch all the contracts that are attached to the shopping cart.
we have implemented a BADI implementation of BBP_SOS_BADI (method BBP_SOS_CHECK) for passing some changed values to the contracts of the shopping cart into the popup screen that is displayed when we press PROPOSE SOURCES OF SUPPLY button and when we select any contract and press ASSIGN ONLY button in the popup screen the badi BBP_DOC_CHANGE_BADI is triggered.
i have implemented another BADI implementation of BBP_DOC_CHANGE_BADI for fetching the selected contract and pass the values to another screen, but the problem is that when we select one contract and press the assign only button we are fetching the wrong contract number ( that is in the BADI method BB_SC_CHANGE parameter IT_ITEM we are fetching the wrong contract), if we again do the same procedure for the second time we are getting the correct contract.
i am unable to understand why we are getting the wrong contract in the first time( that is we are getting contract other than the selected one).
as per my understanding i think when we are passing data to the popup screen using BBP_DOC_CHANGE_BADI we are not updating the shopping cart with the changed data.
can anyone tell me how we can update the SHOPPING CART with the changed contracts data, i have used BBP_PD_SC_UPDATE, BBP_PD_SC_SAVE and other shopping cart FM but nothing is happening.
Thanks
Tanveer

Hello,
What version of SRM are you on? Have you check for OSS Notes? I have had trouble with BBP_DOC_CHANGE_BADI but it was because of other issues. The BADI works pretty well and it is called almost every time something happens to the shopping cart.
I have noticed that sometimes that values are not changed til the second calling of the BADI. I have yet understand why but I think it has to do with prompt processing. Usually, we train our requisitioners to click the 'Check' button to flush things out.
I don't know if I was helpful.... another thought.... could there be an error caught by BBP_DOC_CHECK_BADI that is preventing change in BBP_DOC_CHANGE_BADI?
Regards, Dean.

Passing data from one bsp application to another

Hi,
I have few queries that most of you would have done in ur projects:
1. I want to pass data from one bsp application to another:
eg based upon selected row of table view which populates material no and descriprion to another application which open the entire material master data.
Now, i have both the pages in diff bsp applications in place but unable to pass the selected material code to the second bsp application.
Had it been two different pages of same application I was able to achieve it with set parameter()
2. To stop the application from reprcessing the data:
eg: Suppose I have a bsp page where user fill details of a customer and on submitinng the details a customer is created in background and the entire page is disabled by my code. Even now if the user press refresh (F5) button then another customer gets created in the background. So basically i want to avoid the reprocess of the onSubmit event
Few lines of sample code would be very helpful.
Best Regards,
Saurabh Tripathi

Hi,
When I am writing the following code in appl1/page1:
        export abc from transactionID
        to data buffer lv_page_data.
        CALL METHOD CL_BSP_SERVER_SIDE_COOKIE=>SET_SERVER_COOKIE
          EXPORTING
            NAME                  = 'TRANSACTIONID'
            APPLICATION_NAME      = RUNTIME->application_name
            APPLICATION_NAMESPACE = RUNTIME->application_namespace
            USERNAME              = ls_name
            SESSION_ID            = runtime->session_id
            DATA_VALUE            = lv_page_data
            DATA_NAME             = 'lv_page_data'
and following code in appl2/page2:
CALL METHOD CL_BSP_SERVER_SIDE_COOKIE=>GET_SERVER_COOKIE
    EXPORTING
      NAME                  = 'TRANSACTIONID'
      APPLICATION_NAME      = RUNTIME->application_name
      APPLICATION_NAMESPACE = RUNTIME->application_namespace
      USERNAME              = ls_name
      SESSION_ID            = runtime->session_id
      DATA_NAME             = 'lv_page_data'
    CHANGING
      DATA_VALUE            = lv_page_data
   IF lv_page_data IS NOT INITIAL.
     IMPORT abc to transactionid
       FROM data buffer lv_page_data.
   ENDIF.
still the code doesn't work. Please explain and guide
Best Regards,
Saurabh Tripathi

What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?

Hi All,
I am new to TestStand. Still in the process of learning it.
What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?
Thanks in advance,
LaVIEWan
Solved!
Go to Solution.

Hi,
Using the Parameters is the correct method to pass data into and out of a sub sequence. You assign your data to be passed into or out of a Sequence when you are in the Edit Sequence Call dialog and in the Sequence Parameter list.
Regards
Ray Farmer

Performace tuning: how to pass data between different batch job programs?

Hi everyone,
    now i have one problem about performance tuning using threading in SAP programs: split one big program into two programs - one is main program and the other is sub program. using batch jobs, we can submit multi jobs of sub program at the same time.
    does anybody know how to pass data between different batch jobs? I don't want to use temp files. can ABAP memory can implement this?
    thanks!

Wei,
Yes we can transfer the data by using
SAP Memory OR ABAP Memory.
Ex: V_count TYPE i.
V_count = 100.
LOOP AT itab.
IF v_count EQ 25.
Here For every batch job
EXPORT data TO MEMORY ID 'ABC'
   Function module
    JOB_OPEN
   JOB_SUBMIT
   JOB_CLOSE.
ENDIF.
ENDLOOP .
IN your 2nd program.
INITIALIZATION.
IMPORT data FROM MEMORY IF 'ABC'.
FREE memory if .---When you free the memory you will get recent data.
Don't forget to reward if useful.

Getting Customer data from Different R3 system to CRM

Hi Gurus,
I need to get Customer data from different R3 systems to CRM. But the problem is, the customer datas in these R3 systems have the same BP number, and the SD datas were defined same in these R3 systems. Thus, when ı try to fetch these SD datas to CRM, it overwrites the existing datas.
I have read different scenarios to solve this;
1. About Using Mapping.
2. About Working on different Clients.
Do you have any solution or suggestion? Need your Help...
Best Regards...

Hi,
The multplie backend scneario is supproted but wth restrictions and on a project basis. Unfortunealtey there's no simple document we can refer you to for this. You would need to involved SAP conuslting- please refer to note 1084315.
Best regards,
Brian.

Pass data from one web application to another web application

Hi,
Please provide suggestion for following scenario:
Scenario: Basically the aim is to transfer large amount of data from one application to another and display JSP of second application.
User enteres data on a JSP of one web application. When he submits that data, another web application opens in new window and data from first application should be passed to this second web application. Another web application will display that data on its own JSP. User can perform whatever he wants on second application screen.
Possible solutions:
1) response.sendRedirect(): This makes GET request. But, there is large data to send. So, GET is not effective.
2) forward(request, response): Can't use as I have to pass data to different application that is in another context.
3) URLConnection: Here, I can make POST request and set attributes in HTTP request and make connection to another application. I can pass data using output stream. But, I can't display second application JSP to user even if I use input stream to read response. Because control will be ultimately in first application only.
Is there any othe method to achieve this or any of the above options extendable?
Please give your inputs.

Hi,
According to your post, my understanding is that you want to migrate list data from one web application to another.
We can migrate list data programmatically, there are some articles for your reference.
http://blogs.msdn.com/b/tejasr/archive/2007/11/12/code-snippet-copy-list-data-between-sites-programmatically.aspx
http://www.fivenumber.com/copy-sharepoint-list-items-from-one-site-to-another-programmatically/
http://geekswithblogs.net/AnneBougie/archive/2009/01/23/copy-a-sharepoint-list.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

APEX Sequence number when passing data from different instances

Similar Messages

Maybe you are looking for