Error passing data from ODS to IC

Hi,
I have a problem when passing data from ODS to Infocube. According to the messages, the problem is there is erroneous characters in one record's ZANLAGE characteristic. I check and found the problematic record. Mi question is Why the problem showed up when passing data from ODS to IC instead of when passing data from Infosource to ODS? I check de ODS and the problematic record is in: " " (hex.). How this characteristic value entered in the ODS correctly, but it can not enter the IC??
Mauricio

Hi,
I check the ODS settings and the BEx option is not checked. This may explain whay the problem showed up passig from ODS to IC and not before.
What should I do to catch the problem and pass the data from the ODS to the IC?
My problem is how to identify this record, can I use:
if ZANLAGE = " "
ZANLAGE = "XXXXXX".
end if.
Remember that " " is Hex. code!!.
regards
Mauricio

Similar Messages

Error while loading the data from ODS to InfoCube

hai
Im trying to load the data from ODS to InfoCube for particular year .
But it says that there is a source system problem .
why it is like that .
pls tell me
i ll assing the points
rizwan

Hi Rizwan,
you didn't mention the error message in details. there could be a few places to be checked:
- check if BW itself source system is active and in tact and reactivate if necessary
- check if update rule is active and reactivate if necessary
- check if ODS is active and reactivate if necessary
Regards,
Lilly

Error while uploading data from ODS to Cube

Hi All,
Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
I am facing an error while loading the data from ODS to CUBE,the error
is
<b>1.Name is not in the namespace for generated BW Metaobjects
2.Error 18 in the update</b>
And this error is occuring only in quality server.
Thanks,
Ram.

HI RAM SIVA,
make sure that the Data source is replicated and tranfer rules r active.
And also check whether the all transport requests r imported properly.
hope it helps
bhaskar

Error in Source System While Uploading Data from ODS to Data Target

Hi All,
Iam getting Following Error while Uploading data from ODS to Data Target
a) Error in Source System.
b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
The time stamp in the source system is 21.06.2005 07:31:33.
The time stamp in the BW system is 27.11.2004 17:41:45.
Regards,
Chakri

This generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
1. Check for the coonect between the sourse & target systems
2 . Replicate the data sourcses.
3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
Thanks ,
PSG

Error While Loading data from ODS to Infocube

I am trying to load data from ODS to Infocube thru Update ODS data into data target. My requirement was to take a small subset of fields from ODS and design IC and load the data.
My load fails at Extraction process as I get 0 records from total number of records sent in each package. Please let me know if you need more information.
Please advise.
Thanks,
RR

In Details tab of monitor, in extraction step,
Extraction(messages): Errors occured
Green Light for Data Request Received
Green Light for Data Selection Scheduled
Yellow for 25000 Records sent(0 records received)
Yellow for 25000 Records sent(0 records received)
Yellow for 15000 Records sent(0 records received)
Green Light for Data Selection Ended
Please let me know, If you need more information.
Thanks,
R R

Error while loading data from ODS to IC.

Hi Experts,
             I am trying to load data from ODS to IC using Initial load. I failed first time. Then when I am trying to schedule it again I am getting a error message. I deleted the intial request. Even after that, I am getting the following message. Am I missing something?
Delete init. request
REQU_BQQCBQV5ZK9YEBB416C8QXXLC before running
init. again with same selection
Also can any one provide me a document that contians the lenght of all teh technames? I know I can find it out by looking into each one of the Tech Names. But I would be nice if anyone of you can provide me a document.
Can anyone of you please help me.
Thanks,
Nandini.

Hi,
By reading the error:
No transfer structure for InfoSource 8ZYNA_ODS and source system B3TCLNT800
I think the problem is actually with a Datamart. You can try to regenerate the export datasource and activate it.
Also, you can try to activate only the transfer structure again using the report "RS_TRANSTRU_ACTIVATE_ALL".
I hope this helps!
Pietro

Error while loading data from ODS to CUBE.

Hi friends,
When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
Its is showing like this .
Transfer Rules : Missing Massage.
Update PSA : missing massage.
Processing end : missing message.
I have checked the coding in update rules, everything is ok.
Plz any inputs.
hari
Message was edited by:
hari reddy

Might means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
Regards,
Vitaliy

Error while laoding data from ODS to infocube

Hi all,
I am trying to load data from ODS to Cube but its giving error.
I am getting following error
An error occurred while executing a transformation rule:
The exact error message is:
The argument 'Result dependent booking' cannot be interpreted as a
number
The error was triggered at the following point in the program:
GPD5CD2GMGXQYJ77HKMS0C0CQVE 2510
System Response
     Processing the data record has been terminated.
Procedure
      The following additional information is included in the higher-level
     node of the monitor:
     o   Transformation ID
     o   Data record number of the source record
     o   Number and name of the rule which produced the error
Procedure for System Administration.
How to resolve this error, it will be great help if anyone post the steps

Thanks Ananda for your suggestion,
CAn you please tell me How to identify which rule has a problem ..is there any way which tell me which rule and which record is creating a problem

Error While Loading Data from ODS to ODS

Hi Experts,
When i'm loading the data from ods to further ods, i'm facing an error while activating the data saying that 0ref_doc_no consists of invalid characters.Also it is saying that Error when assigning SID.
I'm unable to see the long text for further information.
Regards,
Vijay

Hi vijay bhaskar,
first go to RSA1 -> go to datasource -> search for the data source with name "8<old DSO>". Go to dispaly and click on PSA button on top. Now you can see PSA data request. in the bottom left you select error records and display. now you will see all the error records. go through each and every records and see what is the special characteristic in that record and copy that special character in notepad. After collecting all the special characters in notepad, goto RSKC -> paste all the special characteristics from note pad. execute it.
Now, go back to PSA, delete the request from PSA. Schedure the infopackage to load the data. Now, will not see any error like special characteristics.
I hope you understood and can handle your issue.
Assign points if it is helpful.
Reagds,
S P.

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Error when passing data from app server...

Hello Experts,
I am encountering an error when trying to pass data from application server
to my internal table. Below is the error:
"You cannot convert the character set"
Hope you can help me guys.Thank you and take care!

Hi ,
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures. The code is base on uploading a simple txt file.
REPORT zuploadtab                    .
PARAMETERS: p_infile LIKE rlgrap-filename
                        OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
    name1 like pa0002-VORNA,
    name2 like pa0002-name2,
    age   type i,
    END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
      wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
    CLEAR: wa_string, wa_uploadtxt.
    READ DATASET ld_file INTO wa_string.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                      wa_uploadtxt-name2
                                      wa_uploadtxt-age.
      MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
      APPEND wa_upload TO it_record.
    ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
    write:/     sy-vline,
           (10) wa_record-name1, sy-vline,
           (10) wa_record-name2, sy-vline,
           (10) wa_record-age, sy-vline.
endloop.
Reward points if it is usefull ..
Girish

Passing data from JavaScript to Applets (Error when trying to pass data)

Hi,
I've wrote a small applet for lists but when I try to pass data from my
JavaScript to my applet, I get an "Error: Object doesn't support this property or method". I get this error with a select other sites including the page I'm writing, leading me to believe I may not have installed requried files or set required options. I've included the listing of the code snippet where the error occurs.
document.listApplet.testMethod()OR when I use:
document.applet(listApplet).testMethod()The applet is loaded by this statement:
<OBJECT CODE="CustomAppletList" NAME="listApplet" ID="listApplet" WIDTH="1000" HEIGHT="600"></OBJECT>and loads fine but no data is passed through it's public methods. Can anyone suggest ideas how I can successfully pass data from my JavaScripts to my applets?
Devyn

this should work for you. In your javascript do this.
var myApplet=document.listApplet;
myApplet.testMethod()
If you need more help let me know.
Paul

The error about loading data from ODS to master data.

hi,experts,when I load the data from ODS to master data,there is an error messege:
" InfoSource 8ZPA_0022 is not defined in the source system.
     Message no. R3005
Diagnosis
     The InfoSource 8ZPA_0022 specified in the data request, is not defined
     in the source system.
System response
     The data transfer is terminated.
Procedure
     In the Administrator Workbench of the Business Information Warehouse,
     update the metadata for this source system, and delete the InfoPackages
     belonging to InfoSources that no longer existing ."
But,the InfoSource 8ZPA_0022 is not problem,how can I do？thanks.

Hi,
as suggested by the message, did you update the meta data by doing a replication of datasources for the source system 'myself'? If not, do so and reactivate the communication structure. Then reload.
regards
Siggi

Problem in passing data from 1 screen to another using BBP_DOC_CHANGE_BADI.

Hi Experts,
i am new to the SRM, i am facing problem in passing data from one screen to another.
my requirement is that when we select one shopping cart and press the PROPOSE SOURCES OF SUPPLY button, we will fetch all the contracts that are attached to the shopping cart.
we have implemented a BADI implementation of BBP_SOS_BADI (method BBP_SOS_CHECK) for passing some changed values to the contracts of the shopping cart into the popup screen that is displayed when we press PROPOSE SOURCES OF SUPPLY button and when we select any contract and press ASSIGN ONLY button in the popup screen the badi BBP_DOC_CHANGE_BADI is triggered.
i have implemented another BADI implementation of BBP_DOC_CHANGE_BADI for fetching the selected contract and pass the values to another screen, but the problem is that when we select one contract and press the assign only button we are fetching the wrong contract number ( that is in the BADI method BB_SC_CHANGE parameter IT_ITEM we are fetching the wrong contract), if we again do the same procedure for the second time we are getting the correct contract.
i am unable to understand why we are getting the wrong contract in the first time( that is we are getting contract other than the selected one).
as per my understanding i think when we are passing data to the popup screen using BBP_DOC_CHANGE_BADI we are not updating the shopping cart with the changed data.
can anyone tell me how we can update the SHOPPING CART with the changed contracts data, i have used BBP_PD_SC_UPDATE, BBP_PD_SC_SAVE and other shopping cart FM but nothing is happening.
Thanks
Tanveer

Hello,
What version of SRM are you on? Have you check for OSS Notes? I have had trouble with BBP_DOC_CHANGE_BADI but it was because of other issues. The BADI works pretty well and it is called almost every time something happens to the shopping cart.
I have noticed that sometimes that values are not changed til the second calling of the BADI. I have yet understand why but I think it has to do with prompt processing. Usually, we train our requisitioners to click the 'Check' button to flush things out.
I don't know if I was helpful.... another thought.... could there be an error caught by BBP_DOC_CHECK_BADI that is preventing change in BBP_DOC_CHANGE_BADI?
Regards, Dean.

Outbound IDOC( Error passing data to port)

Hi,
We have an interface running daily configured such that the idocs are converted to files and placed on a directory path.
All the idocs are processed successfully but for one hour the idocs failed and the error message says:
Status: Error passing data to port
Error at OPEN (Directory path) with operating system error msg.:No such file or directory.
The missed data from the error idocs have been sent via PFAL.
But again after this one hour the idocs were successfully posted for the same directory path.
Please let me know what the issue can be here or how can we avoid this.
Thanks.

Hi
*Some times it may happen that IDOC doesnt reach to the port , in case if you are using Transactional RFC port so*
*you can use the report RSEOUT00 for sending the IDOC to port .*
*Hope it may help you .*

Error passing data from ODS to IC

Similar Messages

Maybe you are looking for