Apex with static IP

Hi,
Hope everybody is OK.
I have oracle database express 11 r2 and oracle application express 4.2.1 installed on my PC (Windows server 2008 r2 64 bit), and I run apex by typing "http://localhost:8080/apex/f?p=101" it is working fine.
I got a static IP let we say "123.12.456.45" and Installed it on the same PC, and also I run apex by typing "http://123.12.456.45:8080/apex/f?p=101" FROM INSIDE NETWORK it is working fine.. So now I have 2 IPs:
1- 127.0.0.1 or internat IP
2- 123.12.456.45
When I ping 123.12.456.45 from outside the network through internet; it is reply with no errors.
BUT I cannot run apex by typing "http://123.12.456.45:8080/apex/f?p=101" from outside network through internet, how can I do it?
Need ur help...
Thanks in advance

I personally wouldn't turn off the firewall, rather add an exception. Also, without understanding your network infrastructure, it's hard to propose a solution. Are your servers NAT'ed? If so, you will need to have the port forwarded to your APEX instance. Best bet is to have a discussion with your network admins.

Similar Messages

Possible to simulate a spreadsheet for input, with static values per row

Haven't seen this done but thought I'd ask, is it possible to simulate a spreadsheet interface in Apex? Basically, I have 9 columns each of which needs to be filled out for 10 time periods per day (row), and it's easiest for the user to tab across the columns then down to a new row / next timeslot, to fill out the whole day's worth of data, rather than entering hour by hour & then changing the timeslot manually. This would require that the value for column 1 of row 1 = 8, column 1 of row 2 = 9, column 1 of row 3 = 10 and so on. So, a tabular form but with static values on each row.
Is this possible & if so, any pointers to what to start researching to make this work would be greatly appreciated. I know they can work in a spreadsheet & upoad it and we may go that way but this seemed like an interesting problem to see if Apex could handle it; I just am uncertain where to start on it is all.
Many thanks for your pointers!
gp
Edited by: 834058 on Jul 18, 2011 10:37 AM

Tabular report, with some modifications to have rows added at start of usage. User would on occasion need to click a control to add rows..
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead.
If this question is answered, please mark the thread as closed and assign points where earned..

No Internet Access with Static IP and RVS 4000

I have an RVS 4000. I have several PC's to which I have assigned static IP addresses. I have recently upgraded most of the PC's to Win 7 (64) machines. I updated the firmware on the RVS4000 to 1.3.3.5 in conjunction with this. After such update (and actually before as well) I could not assign a static IP address to a PC and have access to the internet. It connects fine to my LAN, just no internet access. This is also affected on several other machines running Win XP and Win 2003 Server, so it's not just this computer.
I have:
     1. Shut down (powered off/unplugged) everything, router, DSL modem, switches, server, etc.
     2. As I said firmware is current.
     3. Yes, DNS servers and gateway, subnet, etc. are all correctly specified on the PC.
     4. Router is set for gateway mode.
     5. Set to only IPV4.
The only way it allows internet access is to use DHCP. I've even tried taking the IP address via DHCP and manually assigning the DNS servers and that works fine, but as soon as I assign a static IP internet access is immediately gone.
There must be something I'm missing, but I can't seem to find it.
Everything worked fine prior to the conversion of the Win 7 machines, i.e. I had several PC's with static IP's and no problems.
Any thoughts appreciated.

As an addendum, if I turn off the Firewall (internet access policy to disable) it will allow the static IP computer to have internet access. I have the DHCP range set to be .5 - .54 and am using a static ip outside this range. The Internet access policy is to restrict those PC's getting IP via DHCP.

Adobe form -- Issue in Displaying Dynamic text along with Static text

Hi All,
I am having an issue when i am displaying a dynamic text along with static text in adobeforms.
The dynamic text is slightly coming down and not aligned with the static text. i can see half row it is coming down.
how to align both texts to be printed in same format.
Request all of your expert advices in achieving this .
Thank you in advance.
Thanks&Regards,
Phani Miriyaila.

Hi,
Select both dynamic and static text in the layout. Goto Object palette -> Layout. Give values to X,Y coordinates and Height & Width. Anchor properly and specify margins as well.
Select both dynamic and static text in the layout. Right click on it and goto palettes -> Paragraph. It gives you the text alignment options. Align the text and give similar font and size.
Thanks & Regards,
Sanoosh

Problem in Integration of Apex with R12

Hello,
I followed the paper apex-ebs-extension-white-paper-345780.pdf to do Integration of Apex with R12. but stuck on one step.
I am done with all the steps in R12. Now if i click the menu in R12, its going to my existing Apex aplication but still asking username and password.
Can anyone help me out in what exactly I need to change in Apex Authentication scheme in Apex. Right now I am using Authentication scheme as Application Express.
Please help me out
Thanks in advance
Ananya
Edited by: Ananya on 26 Dec, 2011 8:51 PM

Hi Mini,
Thanks a lot for ur replies. But it is not working for me. I am not able to figure out whats going wrong.
My Requirement is to redirect to the first page of my application without asking for the APEX login page from the EBS menu.
So summarizing whatever I steps i have followed:-
(1) Created Profile and function in APPS as given in "apex-ebs-extension-white-paper-345780.pdf"
(2) I created the following package in APPS schema
     CREATE OR REPLACE PACKAGE APPS.XXAPX_SECURITY_PKG AUTHID DEFINER AS
     FUNCTION generate_hash (
     p_string IN VARCHAR2
     , p_offset IN NUMBER DEFAULT 0) RETURN VARCHAR2;
     FUNCTION validate_hash (
     p_string IN VARCHAR2
     , p_hash IN VARCHAR2
     , p_delay IN NUMBER DEFAULT 5) RETURN BOOLEAN;
     END XXAPX_SECURITY_PKG;
     CREATE OR REPLACE PACKAGE BODY APPS.XXAPX_SECURITY_PKG AS
     g_key VARCHAR2(100);
     FUNCTION generate_hash (
     p_string IN VARCHAR2
     , p_offset IN NUMBER DEFAULT 0) RETURN VARCHAR2
     IS
     BEGIN
     IF p_string IS NULL THEN RETURN NULL; END IF;
     RETURN RAWTOHEX(UTL_RAW.cast_to_raw(
     DBMS_OBFUSCATION_TOOLKIT.MD5(
          input_string=>p_string||':'||
          TO_CHAR(SYSDATE-(p_offset/24*60*60), 'YYYYMMDD HH24MISS')||g_key)));
     END generate_hash;
     FUNCTION validate_hash (
     p_string IN VARCHAR2
     , p_hash IN VARCHAR2
     , p_delay IN NUMBER DEFAULT 5) RETURN BOOLEAN
     IS
     BEGIN
     FOR i IN 0..p_delay LOOP
     IF p_hash = generate_hash (p_string, i) THEN RETURN TRUE; END IF;
     END LOOP;
     RETURN FALSE;
     END validate_hash;
     BEGIN
     SELECT encrypted_user_password INTO g_key
     FROM FND_USER WHERE user_name = 'SYSADMIN';
     END XXAPX_SECURITY_PKG;
(3) Created a function in the APPS schema:-
     create or replace FUNCTION ebs_authenticate (
     p_username IN VARCHAR2
     , p_password IN VARCHAR2) RETURN BOOLEAN
     AS
     BEGIN
     IF apps.XXAPX_SECURITY_PKG.validate_hash (p_username, p_password) THEN RETURN TRUE; END IF;
     RETURN (apps.FND_WEB_SEC.validate_login (p_username, p_password) = 'Y');
     END ebs_authenticate;
(4) In my authentication scheme of my apex application i have changed it to use custom authentication to use the below function
     return apps.ebs_authenticate
(5) Created a procedure in the APPS schema:-
     create or replace PROCEDURE apps_logon
     IS
     v_username VARCHAR2(100);
     v_password VARCHAR2(32);
     BEGIN
     wfa_sec.getsession(v_username);
     v_password := xxapx_security_pkg.generate_hash(FND_GLOBAL.user_name);
     IF v_password IS NOT NULL THEN
     APEX_CUSTOM_AUTH.login(
          P_UNAME => v_username,
          P_PASSWORD => v_password,
          P_SESSION_ID => v('APP_SESSION'),
          P_APP_PAGE => apex_application.g_flow_id||':38'
     ELSE
     RAISE_APPLICATION_ERROR(-20001, 'Password is null, session id = '||icx_sec.g_session_id);
     END IF;
     END apps_logon;
(6) In my login page, i have created a process Get Username Cookie and with the process point: onload(Before Header)
     BEGIN
     apps.apps_logon;
     EXCEPTION WHEN OTHERS THEN NULL;
     END;
Now I am getting this error with the login page :-
ORA-06502: PL/SQL: numeric or value error: character string buffer too small Content-type: text/html; charset=UTF-8 Set-Cookie: WWV_CUSTOM-F_1120314105059329_811=B4134623EB436033; path=/; Location: f?CallFromForm='Y'&p=811:38
Please help me figure out the problem as I am struggling a lot with this from last few days :(
Thanks in advance.

Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.

We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR

Access of possibly undefined property number through a reference with static type...

Hello everyone !
I run into this problem today ... take a look on the code :
import com.trick7.effects.TeraFire;
for (var j:uint=0; j<10; j++) {
    var fire:TeraFire = new TeraFire();
    fire.x = j * 40 + 20;
    fire.y = 100;
    fire.number = j; //This line is causeing the problem
    addChild(fire);
    fire.buttonMode = true;
TeraFire class creates fire particles. The compiler error is :
Scene 1, Layer 'Layer 1', Frame 1, Line 7
1119: Access of possibly undefined property number through a reference with static type com.trick7.effects:TeraFire.
Anyone can help me to find a solution to this problem.
I can do that ".number" with a movieclip but not in this case. What can I do ?

I borrowed that class from the internet.
I made the changes you suggested: imported flash.Display.MovieClip and also made the class extend MovieClip.
The error is still throwing in compiler errors. I am not really good enough to edit this class because there are some functions I don't still understand very good. This is the class below:
package com.trick7.effects{
    import flash.display.BitmapData;
    import flash.display.GradientType;
    import flash.display.MovieClip;
    import flash.events.Event;
    import flash.filters.DisplacementMapFilter;
    import flash.filters.DisplacementMapFilterMode;
    import flash.geom.Matrix;
    import flash.geom.Point;
    import flash.geom.Rectangle;
    public class TeraFire extends MovieClip{
        public var phaseRateX:Number;
        public var phaseRateY:Number;
        private var offsets:Array= [new Point(),new Point()];
        private var seed:Number = Math.random();
        private var fireW:Number;
        private var fireH:Number;
        //火の色
        //private var fireColorIn:uint;
        //private var fireColorOut:uint;
        private var ball:Sprite;
        private var gradientImage:BitmapData;
        private var displaceImage:BitmapData;
        private var focalPointRatio:Number = 0.6;
        private const margin:int = 10;
        private var rdm:Number;
        public function TeraFire(xPos:Number=0, yPos:Number=0, fireWidth:Number=30, fireHeight:Number=90, fireColorIn:uint = 0xFFCC00,fireColorOut:uint = 0xE22D09){
            fireW = fireWidth;
            fireH = fireHeight;
            phaseRateX = 0;
            phaseRateY = 5;
            var matrix:Matrix = new Matrix();
            matrix.createGradientBox(fireW,fireH,Math.PI/2,-fireW/2,-fireH*(focalPointRatio+1)/2);
            var colors:Array = [fireColorIn, fireColorOut, fireColorOut];
            var alphas:Array = [1,1,0];
            var ratios:Array = [30, 100, 220];
            var home:Sprite = new Sprite();
            ball = new Sprite();
            ball.graphics.beginGradientFill(GradientType.RADIAL,colors, alphas, ratios, matrix,"pad","rgb",focalPointRatio);
            ball.graphics.drawEllipse(-fireW/2,-fireH*(focalPointRatio+1)/2,fireW,fireH);
            ball.graphics.endFill();
            //余白確保用透明矩形
            ball.graphics.beginFill(0x000000,0);
            ball.graphics.drawRect(-fireW/2,0,fireW+margin,1);
            ball.graphics.endFill();
            addChild(home);
            home.addChild(ball);
            this.x = xPos;
            this.y = yPos;
            addEventListener(Event.ENTER_FRAME,loop);
            displaceImage = new BitmapData(fireW+margin,fireH,false,0xFFFFFFFF);
            var matrix2:Matrix = new Matrix();
            matrix2.createGradientBox(fireW+margin,fireH,Math.PI/2,0,0);
            var gradient_mc:Sprite = new Sprite;
            gradient_mc.graphics.beginGradientFill(GradientType.LINEAR,[0x666666,0x666666], [0,1], [120,220], matrix2);
            gradient_mc.graphics.drawRect(0,0,fireW+margin,fireH);//drawのターゲットなので生成位置にこだわる必要はない。
            gradient_mc.graphics.endFill();
            gradientImage = new BitmapData(fireW+margin,fireH,true,0x00FFFFFF);
            gradientImage.draw(gradient_mc);//gradient_mcを消す必要は？
            rdm = Math.floor(Math.random()*10);
        private function loop(e:Event):void{
            for(var i:int = 0; i < 2; ++i){
                offsets[i].x += phaseRateX;
                offsets[i].y += phaseRateY;
            displaceImage.perlinNoise(30+rdm, 60+rdm, 2, seed, false, false, 7, true, offsets);
            displaceImage.copyPixels(gradientImage,gradientImage.rect,new Point(),null, null, true);
            var dMap:DisplacementMapFilter = new DisplacementMapFilter(displaceImage, new Point(), 1, 1, 20, 10, DisplacementMapFilterMode.CLAMP);
            ball.filters = [dMap];
I you can clarify a little bit further I would appreciate it a lot because I wasted some good time on this.

How to compile Universal binaries in Mac OS X Lion with static linking

Hello Experts,
I have a projects which needs to be ported on Mac. This project uses some third party libraries and link them statically. I am new to Mac world and hence struggling to compile universal binaries with static linking on Mac 10.7.3 system installed with Xcode4.3.2 .
Any help ?
Best Regards
Sudhir

Uncheck Organize by Coversation:

Runtime error in linking with static variables....

Hi,
I am building a shared library which includes a compiled object generated from a class containing the static variables only and also I have another version of same class with same & some new static variables in it and using that to generate another shared library. Now when I tried to run a program
which links with both the library it core dumps when it tries to return from the program i.e when it finishes.
Can someone please help me explain why my program is behaving like that?? Can duplicate inculsion of static variables in different scope can cause problem ?? How can this be avoided ?
Also please be advised that the class with static variables gets generated at the compile time using a script which uses a DTD whose version (specification) can be different in both the libraries therefore I can't just seperate the common stuff into one class and specific into another.
Thanks.
Rajeev.

Not to worry...found the answer in another post. Seems like patches need to applied to the OS.

How to use both wired and wireless connection with static addresses

Now that I have setup my home network with static addresses (router, mini1, mini2 and PC) in the way I want, (big thanks to BDAqua http://discussions.apple.com/thread.jspa?threadID=1271635&tstart=0) I would like to understand some more advanced network concepts.
I would like to change the network so that I use both the wireless connection and the built-in ethernet connection at the same time in my Mac mini1. I would like to connect my PC to my Mac mini by using the wired ethernet connection so that I reach the Internet from my PC as well. I would also like to be in control of all the addresses therefore I want to assign the addresses manually.
The question: What addresses should I use between mini1 and PC? Should I use the same wireless address space as I already use between the wireless router and the other computers (router: 192.168.1.1, mini1: 192.168.1.101, mini2: 192.168.1.103) or should I use something totally different like 10.X.X.X? What should I put in ethernet connection "Router"-field, the same as in Airport (192.168.1.1)? What about DNS, same as in Airport?

If I understand this correctly, you wish your Mini to perform Internet Sharing for your PC, correct!?
If so you'll pretty much have to let the Mini handle DHCP & NAT on the Ethernet port. You also want to be sure Airport is dragged to the top of Network>Show:>Network Port Configurations, that's what position the Mini will use 1st for Internet itself.
On the Mini turn on both Web Sharing & Internet Sharing. The PC once connected will have the Mini's Ethernet IP as it's Gateway addy.

Call to a possibly undefined method getClipboardContents through a reference with static type flashx.textLayout.edit:ISelectionManager.

Hi Guys,
As i am using the nigtly build of TLF 4.0.0.11073.
I want to copy some text from the TLF, by copy operation. I am getting this type of Error.
- Call to a possibly undefined method getClipboardContents through a reference with static type flashx.textLayout.edit:ISelectionManager.
In the previous build, i dont use to get this type of error, but in this nightly builds i am getting this type of error.
Can anyone help me to fix the same or any workaound.
Thanks in advance.
Krishna

This functionality is still available, but it has moved. It's now in a TextClipboard class, in the same flashx.textLayout.edit package. So you should replace calls to getClipboardFormat() with TextClipboard.getContents().
Hope this helps,
- robin

How to set user friendly URL in ApEx with OHS 11g ?

Hi,
How to set user friendly URL in ApEx with OHS 11g ?
I want change the link http://190.148.xxx.xxx:8080/pls/apex to something like http://xxx.com.
I dont want to use iFrame solution. Please suggest any other method to acheive the same.
Thanks & Regards,
Ranu

Hi all
Iam using apex 4.0 -oracle 11g with OHS on linux os
I need to change my apex url http://x.x.x.x:xxxx/apex to http://x.com
What are the settings i need to do.
If any one knows please share the solution with me
Thanks & In advance

How to create a Shuttle box in Apex with simple copy and move option..

I want to create a shuttle box in Apex with simple copy option. the demo application I downloaded from oracle had a two level selection query option which I dont need and was not even compatible with my version. All I need is a way to shuttle single query values between two multiple select lists. I could not find any demo.
My Apex version 2.1 with XE
query : select distinct fieldid d, fieldid r from field order by 1
What kind of buttons do I need.. ? submitting or url redirecting ?

Hello,
>>
The demo is not working in my apex 2.1 as I mentioned in the post.
>>
Not working is not enough of a description to help you out. I assume that what you mean is it won't install into XE since the demo was built in 2.2 and uses some 2.2 specific technology for the install.
The way to get around that issue like I said was to get a free workspace on apex.oracle.com install the demo application there and then using some cutting and pasting recreate the demo app in your XE instance.
Carl

Integration of Oracle Apex with EBS R12.1.1

Dear All,
We are in process of integrating Oracle Apex 4.0.2 with EBS R12.1.1 with the help of http://www.oracle.com/technetwork/developer-tools/apex/apex-ebs-wp-cabot-consulting-169064.pdf.
After doing all the steps, the moment when we navigate from EBS application to Apex application by clicking on the EBS menu link it ends up with below error
"404 Not Found
Resource /OA_HTML/null/pls/apex/f not found on this server"
After some analysis i found the below code in "LaunchApex.jsp" for getting the profile value (supposed to be 'http://myserver:port') from custom system profile "APEX_HTTP_SERVER" and prefixing to "/apex/f?p=applicationid:page::APPS:::" is not happening properly
String l_launcher = ctx.getProfileStore().getProfile("APEX_HTTP_SERVER");
l_launcher = l_launcher + "/apex/f?p=" + p_application + ":" + p_page;
l_launcher = l_launcher + "::APPS:::" + p_item_names + ":" + p_item_values;
as we found that the custom system profile "APEX_HTTP_SERVER" not exist in EBS system. But it works without any page error if we hard code the entire apex application URL in l_launcher variable, but this takes us to EBS login page instead of Apex application page.
So i feel we can't bypass using profile value from "APEX_HTTP_SERVER" as it has some relation with EBS application session.
So could anyone please help me how we could create custom system profile "APEX_HTTP_SERVER" or any other options to make the seamless integration of Oracle apex with EBS works without any second login page
Thanks in advance
Edited by: 805196 on Aug 25, 2011 12:23 AM

Hi,
Create a profile under Application Developer Responsibility as follow:
Name OAE_LAUNCHER
Application <whatever>
User Profile Name Oracle Application Express Launcher
Description Oracle Application Express Launcher
2. Set above profile value under System Administrator Responsibility -> Profile -> System, and search for the ‘OAE_LAUNCHER’.
Set the value at Site Level as:
http://<hostname>:<Apex port>/pls/apex
Then instead of hardcoding the URL in the jsp, just give the profile name OAE_LAUNCHER that you have just created in the jsp.
Hope this helps you
Brgds,
Mini
If this is helpful or correct, assign points promptly.

Draw Dynamic Column with Static Columns

Hi All
I have to show dynamic columns with static columns including column header and I am choosing the Cross Tab style. I have done this already in SSRS but failed to do in Crystal Report version (Crystal Report Basic for Visual Studio 2008).
Name             Hair Color      City        Age           Mobile                        Email
Jannie            Brown          Dublin        15         +353 122 1234567     Email Address
John               Black            Dublin       20          +353 145 1234567      Email Address
Dynamic Columns
Name , Hair Color , City Age
Static Column
Mobile, Email
I also face empty rows in cross tab report.
Please help and give me a chance of thanks.

Thank you very much for your kind response. Actually i have dynamic Store Procedure results based on parameters and yes static column will never changed
Store Procedure Result
Mobile                        Age            Email                       Key              Value
+3531221234567     15             Email Address         Name           Jannie
+3531221234567     15             Email Address         Hair Color    Brown
+3531221234567     15             Email Address         City              Dublin
+3531451234567     20             Email Address         Name           John
+3531451234567     20             Email Address         Hair Color     Black
+3531451234567     20             Email Address         City              Dublin
And I want to draw report in following style
Name     Hair Color     City      Age      Mobile                       Email
Jannie   Brown          Dublin   15     +3531221234567       Email Address
John     Black             Dublin   20     +3531451234567       Email Address

Apex with static IP

Similar Messages

Maybe you are looking for