API or Sample code to monitor the temperature of Intel processors

Is there any free(no license or trail) API or sample code for temperature monitoring which can able to monitor Intel single Core, dual Core and quad Core processors temperature ?
http://tnvbalaji.com
http://in.linkedin.com/in/tnvbalaji

Hi,
Would you mind letting me know the result of the suggestions? If you need further assistance, feel free to let me know. I will be more than happy to be of assistance.
Best regards,
Jesse
Jesse Jiang [MSFT]
MSDN Community Support | Feedback to us

Similar Messages

Need help with API and sample code for checking a user's rights on a folder

Hi All,
I am working on an UCM integration where user supplies a folderpath (ucm folders), and a file is later uploaded to this location.
Since a user can provide a folderpath where he has only Read Access or no access at all, we are trying to work out a way to pre-check his permissions on the folder.
Since we have Entity Security enabled, we have 5 security fields to rely on Account, Security Group, User Access List, Group Access List, Role Access List.
Writing custom code for this security check is second on our agenda.
Firstly, we wish to know the API and sample code that typically performs this Security Check in UCM.
We could find intradoc.shared.SecurityUtils which has methods to check security on SGroup and Account, but we couldn't find anything for:
1) Overall security check
2) ACL security check on top of sgroup and account security check

Any ideas anyone?!
I am looking forward to some pointers here. :(

Firstly hello to all. I'm looking to create a vi that will take a single logged output from a thermocouple and monitor the temperature and produce a Boolean when the temperature has stabilised for a pre determined time say 1minuet.

Firstly hello to all. I’m looking to create a vi that will
take a single logged output from a thermocouple and monitor the temperature and
produce a Boolean when the temperature has stabilised for a pre determined time
say 1minuet. I have managed to find a couple of examples on the forum but one
will only run on V8.2 and I have V8, the other is for more than one channel
witch is fine I can always reduce this, but it was the timing feature I was
having difficulty with. I looking to monitor the temperature of a motor until
it has stabilised prior to testing and then to use this temperature as a
reference. Pleas forgive my ignorance if this is a very simple thing but I’ am
learning and really enjoying it. Thank you in advance for your answers.

Hi
Graham, thank you for you reply.
What I’ am trying to achieve is a vi I can use in a motor
testing setup, a part of this would be to warm the motor up until the exhaust
air temperature has stabilised, this takes approximately 10 minuets. I was
thinking of just letting the motor run for this time and leave it at this, but
some motors warm up quicker that others and. I am basically looking for a vi with
an adjustable temperature window of say ±5 C° in 1° increments, timing wise 1minuet
to 10min the adjustment is so I a can use this for another application. I tried
to adjust the code I found at the link below but had a little difficulty with
the timing. Thank you so much for your help it’s much appreciated.
sine.ni.com/niforum/niforum?forumDU=http://forums.ni.com/ni/board/message?board.id=170&message.id=251017&requireLogin=False

How do i monitor the temperature

Hi, how do i monitore the temperature of my macbook C2D? what is the normal temp of the macbook?
Thanks

Many ways to see those numbers. I use the iStat pro widget:
http://www.apple.com/downloads/dashboard/status/istatpro.html
wich gives a lot of useful info. As for normal operating temperature, some macbooks run cooler than others. My temperature at idle (not start up) is in the low 50s (celsius). Fans start to ramp up in the low 60s, and won't let the temp climb up to more than, say, 78-80, under a very heavy work load.

Need Sample code to upload the data to Application Server

Hi ,
I need to upload the data to application server.
The output should be an XML file.
Can anybody send me sample code for this.
Reward points are assured.
Best Regards
Bhagat.

may be this code wil help ,first to downjload the XML fine -
1)
REPORT zhr_test2_tk.
TYPE-POOLS: ixml.
TYPES: BEGIN OF xml_line,
        data(256) TYPE x,
       END OF xml_line.
DATA: l_ixml            TYPE REF TO if_ixml,
      l_streamfactory   TYPE REF TO if_ixml_stream_factory,
      l_ostream         TYPE REF TO if_ixml_ostream,
      l_renderer        TYPE REF TO if_ixml_renderer,
      l_document        TYPE REF TO if_ixml_document.
DATA: l_element_position TYPE REF TO if_ixml_element,
      l_element_title    TYPE REF TO if_ixml_element,
       l_element_flight TYPE REF TO if_ixml_element,
       l_element_from    TYPE REF TO if_ixml_element,
       l_element_to      TYPE REF TO if_ixml_element,
        l_element_dummy   TYPE REF TO if_ixml_element,
         l_value           TYPE string.
DATA: l_xml_table       TYPE TABLE OF xml_line,
      l_xml_size        TYPE i,
      l_rc              TYPE i.
DATA: lt_erec TYPE TABLE OF hrp5126,
      l_erec TYPE hrp5126.
DATA: date(10),
      time(4),
      filepath TYPE string.
CONSTANTS: filedir TYPE string VALUE 'C:\tmp\',
           filename TYPE string VALUE 'ZHR_test'.
START-OF-SELECTION.
fill internal table
SELECT * FROM hrp5126 INTO TABLE lt_erec.
Start filling xml DOM object from internal table lt_erec.
LOOP AT lt_erec INTO l_erec.
*Create the root node 'position'
    IF sy-tabix EQ 1.
    create an ixml factory
      l_ixml = cl_ixml=>create( ).
    create Document Object Model
      l_document = l_ixml->create_document( ).
   Fill root node with value 'position'
      l_element_position = l_document->create_simple_element(
                     name   = 'position'
                     parent = l_document ).
    ENDIF.
    IF sy-tabix GT 1.
    create element jobtitle as child of position
      l_value = l_erec-jobtitle.
      l_element_title = l_document->create_simple_element(
                         name   = 'job_title'
                         parent = l_element_position
                         value = l_value ).
      l_value = l_erec-empl_start_date.
      l_element_dummy = l_document->create_simple_element(
                         name   = 'StartDate'
                         parent = l_element_title
                         value = l_value ).
      l_value = l_erec-empl_end_date.
      l_element_dummy = l_document->create_simple_element(
                         name   = 'EndDate'
                         parent = l_element_title
                         value = l_value ).
    ENDIF.
ENDLOOP.
IF sy-subrc NE 0.
    WRITE: 'No data in table hrp5125'.
ENDIF.
create a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
connect internal XML table to streamfactory
l_ostream = l_streamfactory->create_ostream_itable(
                  table = l_xml_table ).
render the document
l_renderer = l_ixml->create_renderer( ostream = l_ostream
                                        document = l_document ).
l_rc = l_renderer->render( ).
Get time and date
WRITE sy-uzeit2(2) TO time2(2).
WRITE sy-uzeit0(2) TO time0(2).
WRITE sy-datum4(2) TO date0(2).
WRITE sy-datum6(2) TO date2(2).
WRITE sy-datum0(4) TO date4(4).
*Build filename with date and time reference
CONCATENATE filedir filename date time '.xml' INTO filepath.
<i>* This is the code I hope to modify in order to save the xml structure on the application server, with a specified filepath.</i>
<b> OPEN DATASET filepath FOR OUTPUT IN BINARY MODE.
LOOP AT lt_erec into l_erec.
    TRANSFER l_erec TO filepath.
ENDLOOP.
CLOSE DATASET filepath.</b>
save XML document
l_xml_size = l_ostream->get_num_written_raw( ).
*This is the code for download to local computer
CALL METHOD cl_gui_frontend_services=>gui_download
   EXPORTING
     bin_filesize            = l_xml_size
     filename                = filepath
     filetype                = 'BIN'
   CHANGING
     data_tab                = l_xml_table
   EXCEPTIONS
     file_write_error        = 1
     no_batch                = 2
     gui_refuse_filetransfer = 3
     invalid_type            = 4
     no_authority            = 5
     unknown_error           = 6
     header_not_allowed      = 7
     separator_not_allowed   = 8
     filesize_not_allowed    = 9
     header_too_long         = 10
     dp_error_create         = 11
     dp_error_send           = 12
     dp_error_write          = 13
     unknown_dp_error        = 14
     access_denied           = 15
     dp_out_of_memory        = 16
     disk_full               = 17
     dp_timeout              = 18
     file_not_found          = 19
     dataprovider_exception = 20
     control_flush_error     = 21
     OTHERS                  = 22.
IF sy-subrc <> 0.
   MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
           WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
2) uploading tht PC XML file to APPliaction server -
DATA rec like QISRS_XML_LINE.
OPEN DATASET filepath FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP AT l_xml_table into rec.
TRANSFER rec TO filepath.
ENDLOOP.
CLOSE DATASET filepath.

What is the best I7 Intel processor to get on the Macbook Pro 15"? Are these processors 2nd generation processors? Does it matter? Should I wait until - when? - for 2nd generation processors to be used? Does the 2.5 Mh processor make a difference?

I'm about to order a MacBook Pro 15". I wonder if the I7 processors are 2nd generation or if it matters. Also, is there significant benefit to getting the 2.4 or 2.5 Ghz processor over the 2.2? I'm not a gamer or graphics manipulator, but I do look at (not edit) a lot of video for my work, and I typically multi-task, having many applications and internet windows open at once. Also, I will be running Windows for work access and applications. Of course, I have little idea what makes a difference in my use experience, except I plan to get max RAM and probably the fastest hard drive. Any advice welcome.

Steve,
I appreciate your focus on assistance, and thank you for your help. Couple of follow up questions: What you said about the new specs suggests that the MacBook Pro line has recently been upgraded with, what, the 2nd gen Intel chips, some other incremental improvements? So maybe it has paid off to crawl along with my old mac to get the latest tech. For these kinds of upgrades, I guess Apple doesn't advertise that they have the latest chips (I've seen PC ads touting the 2nd gen chips, and checked out the Intel site, so that's how I became aware) and all?
I'm planning to enjoy this computer for quite some years. Of course I will get the 3 yr extended warranty. And I was planning to get the hi res antiglare screen: that seems to be the best of the options. It looks like one can now get a faster 750 Gb fast drive, instead of having to settle for 500 in the faster version. The cost does add up, but my feeling was to go for broke and get the best machine I can. So does getting the faster cpu and hd and max ram (perhaps buying third party) and all make sense, assuming I can afford it when I add everything up, or is it like a moderately good guitar player getting a top of the line guitar he can't really play well enough to warrant it? (I remember a story about a student under Segovia arriving with a very very expensive guitar when he was still early in the learning process; it may be apocryphal, but story goes that Segovia took the guitar from the student and smashed it to smithereens. I assume that was not just because the student mistook the instrument for skill in playing it, but perhaps also because he would be too careful with such an expensive instrument, and fail to master it. Maybe not a perfect analogy, but I could be mislead by seeking the "best barn burner on the block" when what I need is what will work fine for my purposes.) So I think your original response was probably right on in terms of what will actually be of use to me.
Thanks again,
David

Transcation code to monitor the live cache usage

Hi, I wanted to know the transcation to check the live cache & optimser usage ??
Regards,
Bhavesh

Hi Bhavesh,
The following are the transaction codes as required by you.
1) LC10 - Livecache Monitoring
2) /SAPAPO/OM03 - liveCache Test Program: Start liveCache Check
3) /SAPAPO/OM04 - LCA Version
4) /SAPAPO/OM11 - Livecache Log
5) /SAPAPO/OM12 - Delete Livecache Log
6) /SAPAPO/OM13 - Analyze liveCache and LCA Objects
7) /SAPAPO/OM17 - liveCache Consistency Check
8) /SAPAPO/OPT_STOP - Terminate Optimization Runs
9) /SAPAPO/OPT12 - Optimisation Process Overview
10)/SAPAPO/OPT03 - Optimisation User Overview
11)/SAPAPO/OPT11 - Optimisation Log Display
Hope the above information is useful for you. Please confirm
Regards
R. Senthil Mareeswaran.

I am using fieldpoint and labview to log and monitor the temperatures of my system. but i am not using Labview 6i with DSC, how can i do it??

i am using fieldpoint 2.0 and labview 6i to monitor my system, but i think i don't have labview DSC.

I have written a relatively large Fieldpoint application "just" using LV5.1 FDS, so it can be done.
Fieldpoint can be seen as an external instrument, so you need to use the driver/vi's that comes with FP.
I believe using DSC would only make the job easier for you.

SpeakHere sample code: where is the recording.caf directory!!??

can anyone point out to me the directory of the recording.caf when the SpeakHere application finish its recording

/Users/<your user name>/Library/Application Support/iPhone Simulator/User/Applications/<big hex number>/Documents

I want to an API or any sample code to make business calls to J.D.Edwards

hi,
i want to make use of J.D.Edwards from my java GUI application, by using my Application Interface i want to make use of Java Calls to the the J.D.Edwards. is any one is having API or Sample code fro this?
plz help me out Regarding this.

hi,
i hav searched through google also
i did not get anything regarding this, what all got apart from this is,
in market we are having 3rd party onnectors for this.
but i dotn use any of them.
can any body help me regarding this plz.

Essbase API Sample code

Hi,Can anyone help me to get Essbase API's sample code for Java.Thanks in advance.Mahesh

When you install Essbase Deployment Services (formerly Essbase Enterprise Services), which is the container for the Java API, a sample directory get installed that has about 30 sample Java classes covering a wide variety of JAPI functionality.Tim TowApplied OLAP, Inc

KIMYONG : API ( FND_SUBMIT, FND_REQUEST) Sample Code 소개

Purpose
Extension 개발자들이 간혹 요청하는 Standard API (FND_SUBMIT, FND_REQUEST)의 sample code입니다.
Configuring the Script
FND_SUBMIT test procedure and sample code
Creates a procedure called fnd_submit_test that can be registered and run as a concurrent program.
This procedure will use the FND_SUBMIT API to submit a request set. (Function Security Reports - This request set should be seeded, if it is not available the values in the script may need to be changed.) The procedure will then place itself in a Paused status until the request set completes.
Running the Script
1. Install this procedure in the APPS schema.
2. Register the procedure as a concurrent program
Caution
This script is provided for educational purposes only and not supported by Oracle Support Services. It has been tested internally, however, and works as documented. We do not guarantee that it will work for you, so be sure to test it in your environment before relying on it.
Proofread this script before using it! Due to the differences in the way text editors, e-mail packages and operating systems handle text formatting (spaces, tabs and carriage returns), this script may not be in an executable state when you first receive it. Check over the script to ensure that errors of this type are corrected.
Script
REM +==========================================================================
REM | Concurrent Processing Sample Code
REM |
REM | FILE:
REM | fnd_submit_test.pls
REM |
REM | REVISION:
REM | $Id$
REM |
REM | DESCRIPTION:
REM | FND_SUBMIT test procedure and sample code
REM | Creates a procedure called fnd_submit_test that can be registered
REM | and run as a concurrent program.
REM | This procedure will use the FND_SUBMIT API to submit a request set.
REM | (Function Security Reports - This request set should be seeded, if
REM | it is not available the values in the script may need to be changed.)
REM | The procedure will then place itself in a Paused status until the
REM | request set completes.
REM |
REM | INSTRUCTIONS:
REM |
REM | 1. Install this procedure in the APPS schema.
REM |
REM | 2. Register the procedure as a concurrent program
REM |
REM |
REM +==========================================================================
whenever sqlerror exit failure rollback;
create or replace procedure fnd_submit_test (errbuf out varchar2,
retcode out varchar2) as
success boolean;
req_id number;
req_data varchar2(10);
srs_failed exception;
submitprog_failed exception;
submitset_failed exception;
begin
-- Use FND_FILE to output messages at each stage
fnd_file.put_line(fnd_file.log, 'Starting test...');
-- Read fnd_conc_global.request_data, if available then we have been
-- reawakened after the request set has completed.
-- If so, exit.
req_data := fnd_conc_global.request_data;
if (req_data is not null) then
errbuf := 'Done!';
retcode := 0 ;
return;
end if;
-- Step 1 - call set_request_set
fnd_file.put_line(fnd_file.log, 'Calling set_request_set...');
success := fnd_submit.set_request_set('FND', 'FNDRSSUB43');
if ( not success ) then
raise srs_failed;
end if;
fnd_file.put_line(fnd_file.log, 'Calling submit program first time...');
-- Step 2 - call submit program for each program in the set
success := fnd_submit.submit_program('FND','FNDMNFUN', 'STAGE10', 'System Administrator', chr(0));
if ( not success ) then
raise submitprog_failed;
end if;
fnd_file.put_line(fnd_file.log, 'Calling submit program second time...');
success := fnd_submit.submit_program('FND','FNDMNMNU', 'STAGE10', 'System Administrator', chr(0));
if ( not success ) then
raise submitprog_failed;
end if;
fnd_file.put_line(fnd_file.log, 'Calling submit program third time...');
success := fnd_submit.submit_program('FND','FNDMNNAV', 'STAGE10', 'System Administrator', chr(0));
if ( not success ) then
raise submitprog_failed;
end if;
-- Step 3 - call submit_set
fnd_file.put_line(fnd_file.log, 'Calling submit_set...');
req_id := fnd_submit.submit_set(null,true);
if (req_id = 0 ) then
raise submitset_failed;
end if;
fnd_file.put_line(fnd_file.log, 'Finished.');
-- Set conc_status to PAUSED, set request_data to 1 and exit
fnd_conc_global.set_req_globals(conc_status => 'PAUSED', request_data => '1') ;
errbuf := 'Request set submitted. id = ' || req_id;
retcode := 0;
exception
when srs_failed then
errbuf := 'Call to set_request_set failed: ' || fnd_message.get;
retcode := 2;
fnd_file.put_line(fnd_file.log, errbuf);
when submitprog_failed then
errbuf := 'Call to submit_program failed: ' || fnd_message.get;
retcode := 2;
fnd_file.put_line(fnd_file.log, errbuf);
when submitset_failed then
errbuf := 'Call to submit_set failed: ' || fnd_message.get;
retcode := 2;
fnd_file.put_line(fnd_file.log, errbuf);
when others then
errbuf := 'Request set submission failed - unknown error: ' || sqlerrm;
retcode := 2;
fnd_file.put_line(fnd_file.log, errbuf);
end;
rem ===================================================================
commit;
exit;
Reference
자세한 사항은 Note 221542.1 를 참고하세요.

Not sure about that particular option, but in general you pass in pairs - an example from code I didn't write but maintain (so if this is the worst possible way, I apologize)
proj_req_id6 := FND_REQUEST.SUBMIT_REQUEST('SQLGL', 'XXXX_GLGENLED_PDF',
                          'XXXX General Ledger',
                          '',dummy_default,
                          'P_SET_OF_BOOKS_ID='||v_rep_cmp.set_of_books_id,'P_CHART_OF_ACCOUNTS_ID=101',
                          'P_KIND=L','P_CURRENCY_CODE='||v_rep_cmp.currency_code,
                          'P_ACTUAL_FLAG=A','P_BUD_ENC_TYPE_ID=100',
                          'P_START_PERIOD='||'&1','P_END_PERIOD='||'&1',
                          'P_MIN_FLEX='||v_min_flex||'.'||v_emp_cost_center.COST_CENTER||'.00000.000.000.000.00',
                          'P_MAX_FLEX='||v_max_flex||'.'||v_emp_cost_center.COST_CENTER||'.99999.999.999.ZZZ.99',
                          'P_PAGE_SIZE=180',chr(0),'',
                          '','','','','','','','','','');You see where I have option pairs - for example
'P_ACTUAL_FLAG=A'Tells my program that the value for parameter P_ACTUAL_FLAG is A
This example is from a SQL*Plus script, hence the &1 for the value substitutions.
Hope that helps

How can I install the sample code in my pc?

I have installed Oracle 8.17 on my pc, my operating system is Win2000. But now I cannot install the sample code on OTN. the requirement is winNT, is that the problem? I think Win2000 should be okay. Who can give me some advice, thank you in advance!!!

Do what Ethmoid mentioned: publish your site to a folder on your hard drive and open the html file with a text or html editor like the free TextWrangler. That's the only way to view or edit the code created by iWeb when it publishes the website.
However, there is a website design application, Flux, that can open a published iWeb site and view the code and webpage simultaneously.
OT

Where Can the Sample Code for That Balloon Game Demoed on WWDC for Swift Be Downloaded

Hi. I can't find the balloon game sample code used in the WWDC in the Sample Code for iOS or OS X (assuming it's available for download). If it is available for download by Apple, where can it be downloaded?
Thank you in advance.
God bless, Cor. 13

The assets are in the .playground file's file package. Select the .playground file in the Finder, right-click, and choose Show Package Contents to browse the file package. The graphics files are in the Resources folder inside the file package.

Where to find game sample code?

Where to find game sample code?

Try the iPhone Dev Center (and the developer forums there, when you've signed up):
http://developer.apple.com/iphone/index.action

API or Sample code to monitor the temperature of Intel processors

Similar Messages

Maybe you are looking for