API to pause the program

Hi All,
What is the API to pause the program, then after user hit the "enter" key, it continues. Thanks

Try this
public class Test
    public static void main(String[] args)
        throws Exception
        System.out.println("Press enter to continue...");
        int dummy = System.in.read();
        System.out.println("Thank you!");
}regards
Jesper

Similar Messages

  • How to make a pop up that pause the program (during pop up) and click button to continue OR stop the program

    Hi people,
    I am using LabVIEW to create a testing program to test a power system. The testing lasts for a loop of 90 minutes. 
    I would like to make a pop up when the testing is completed. When the pop up message appear, the whole program should be paused (NOT STOP) and when the two buttons (continue, stop) are pressed, the program should continue to run OR stop. [To start another loop of testing in order to make sure data collected is accurate and consistent.]
    How do I make this kind of pop up window? I have totally no idea how to work on this. I will be very appreciated if someone could give me some suggestions/help regarding this.
    Thank you.
    Regards,
    Vanessa

    VanessaWen wrote:
    Hi Blokk,
    In my actual program I have 3 while loops. In while loop A, it is used as counter, to transfer rows of data from an array (row by row) to loop B. For loop B, device drivers are used so that my program can be used to control the devices (it is for automated instrument testing). Loop C is then used for DAQ, data at different test points will be recorded at every second.
    I would prefer something simple in controlling all the while loops as my program is quite complex.
    Thank you so much.
    Vanessa
    I do not see why you need these 3 while loops. This task could be done with a single while loop, or max 2. Why you need loop A? You could generate data from this array inside loop B. You must use the DAQ and device control part in separate while loops? Maybe you could simplify you code to have one single while loop: at every iteration you could send a new control command to your device(s), and after this do a DAQ measurement.

  • Stopwatch without pausing the program

    I was wondering how to make a stopwatch which recorded time, but did not actually stop the program. The wait function actually waits at that part of the program, and my idea was to take the time stamp at the beginning and then the timestamp at the end and see the difference, but I had trouble formatting the timestamp to ashow me ms, which I need. Is there any other VI which does this?
    Solved!
    Go to Solution.

    I am attaching a stopwatch VI I just made. It has the 'Lap' function built into it as well.
    You can put the main execution code in the execution 'while' loop. This way, there would be no pause or delay in the stop watch or the your main program. You can even control the execution of the main program by passing some control parameter from the stopwatch loop to the main loop.
    Hope this helps.
    Cheers!!!!
    Message Edited by Mani's World on 12-28-2008 02:32 PM
    Attachments:
    Stopwatch.vi ‏86 KB

  • How to pause a program?

    I am running java program in dos mode.
    Actually I want to pause the program when the program is running. How should I do that? Is there any keystroke?
    How to resume, if we pause the program?
    Thanks

    I'm pretty sure that only pauses the output. If you have a thread that does something while the user I/O is blocked, it'll keep going.
    But maybe that's what you want. Or maybe it's irrelevant. Who knows?

  • Automatic Pause (through program) and Manual Resume through front panel Button

    Hi, I am trying to implement a system which measures voltage and current for a varying source voltage at varying temperature. The program acquires 5 pairs of voltage and current data. The issue here is that the source voltage is varied by manually changing the value of the variable resistor. What I would like to do is somehow pause the program automatically once the loop (for acquiring 5 V and I data pairs) has completed. Then, after the user manually changes the value of the variable resistor (and enters the new value through a front panel indicator), the user should be able to resume the program through a front panel button like in this example: https://decibel.ni.com/content/docs/DOC-10792
    Is it possible to implement this in LabView?
    In summary: I would like to implement a system in which the program would pause automatically after a condition has been fulfilled, and can be resumed through a front panel button.
    Thank you in advance for any help and suggestions. I hope I made my query clear. I'm not sure whether attaching the program would help but I included it just in case
    Solved!
    Go to Solution.
    Attachments:
    Resistivity Measurement.vi ‏132 KB

    Hi all! I've overhauled my program after learning how to create state machines in LabVIEW. I think I've managed to make it able to pause program execution by staying in the Initialize state if Pause After Measurement is set to True, only resuming measurement once the user has pressed the front panel button to Acquire Data. Attached is the code for the program.
    Thanks to you all for leading me to the right direction (I hope)  
    I have other questions though for some other functions I want to implement in the program (which are not very relevant to the original topic title). Would it be better to start a new topic or continue the discussion here?
    Attachments:
    Resistivity Measurement v2.vi ‏159 KB

  • Can i edit my program while the program is running?

    With some programming languages you can pause the program while it's running, make a change to it and continue. This feature would be very usefull to me. Does anyone know a routine to accomplish this in LabView?
    Thanks
    Dusty

    Hello Dusty,
    I have a program with some filter routines in a library. The user can select one of the filters and process data with it.
    Because of the "call by reference" I can edit those filters while the main vi is running. And I can even add or delete the filters, as the main vi has a "scan" routine to check for new filters... I thought such a mechanism could be helpful to you.
    Best regards,
    GerdW
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • The program can't start because api-ms-win-core-debug-l1-1-1.dll is missing

    I was recently asked to convert several APP-V 4.6 sequences to APP-V 5.0 SP2 sequences.  On a development workstation, I ran the Test-AppvLegacyPackage command against the APP-V 4.6 sequences to detect potential issues.  Next, I ran the
    ConvertFrom- AppvLegacyPackage command to create the APPV file for the APP-V 5 sequence. 
    I added the converted APP-V 5 sequence in Configuration Manager 2012 R2 as an APP-V deployment type.  For testing, I installed the Configuration Manager 2012 client on a test VM, installed Windows Management Framework 3.0 for PowerShell 3.0 support,
    and finally the APP-V 5.0 SP2 client.  I created a deployment to the test VM and after it installed, I got the following error on most of the sequences that I converted: "The program can't start because api-ms-win-core-debug-l1-1-1.dll is missing
    from your computer.  try reinstalling the program to fix this problem".
    I have very little application virtualization experience at this point so I do not know how to troubleshoot this issue.  Any help is appreciated.

    Hello,
    I would identify the following;
    1. Which applications are receiving the error?
    2. How where they sequenced?
    3. Where is that file coming from?
    4. Why do these applications require the file?
    5. Why is that file now missing?
    After answering these questions, finding a way forward will most likely be easier
    Nicke Källén | The Knack| Twitter:
    @Znackattack

  • How to pause the main program and resume it the first sequence again?

    I am building the main program. How do I pause it in case of activated emergency button or errors? Once the button is deactivated and errors are corrected, I need to resume it again at the first sequence, like reset, not close the program. How to do it?

    Hello astroboy,
    you have to program it...
    A construct like "if not(error) then continue else startover" could help. Also the error cluster and its use in (nearly) all communication VIs can help you. And it could help to connect such error cluster to a case structure...
    Best regards,
    GerdW
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • How can I let the program pause 3 second?

    Please tell me the method and how to write the program!

    Put this in your code :
    Thread.sleep(3000);

  • At a Genius Bar appointment yesterday, we determined that I needed to go to Mountain Lion from Lion.  I purchased Mountain Lion at the Bar, and paused the install so that I could resume from home.  Now I can't find it to resume. Not in Downloads. ?????

    When I upgraded to Lion, my Parallels stopped working and I got a Bootcamp error message.  It had worked fine for the prior year.  I upgraded to Parallels 7.  No luck. At the Genius Bar, the Genius uninstalled Bootcamp.  No luck.  I still get "The Boot Camp partition /dev/diskOs4 used by Hard Drive 1 is missing."
    Another Genius suggested upgrading to Mountain Lion.  While at the Bar, I purchased Mountain Lion and then we paused the install so that I could resume it at home.  Once I got home, I can't find the Mountain Lion installer to resume.  It's not in the Downloads file.  Any clue?
    My business programs all run on Windows, so I have to get it operating.  The Genius Bar isn't much help.  Does anyone know how to get Mountain Lion installed?  How to get Parallels working?

    The "Geniuses" (and I use that word in sarcasm) at the Bar are lying to you. Upgrading from Lion to Mt Lion will not fix whatever problems you are having. In fact it will most likely make them worse.
    If you want to try installing Mt Lion to fix the problems you are having you will need to open the Mac App Store link in your Dock, Login to your Apple ID account for the MAS and go to your Purchases area. Mt Lion should be in there and you will be able to do a proper download. Once you either set your Mac into sleep or shut down and then left the internet connection at the Bar all record of that download was lost. So you will need to restart it again from the beginning, like described above.
    Good Luck

  • Java API to read the Encrypted Values from Windows Registry settings

    Is there any Java API to read the Encrypted Values from Windows Registry settings ?
    My Java Application invokes a 3rd party Tool that writes the key/value to windows registry settings under : “HKLM\Software\<3rdparty>\dataValue”.
    This entry is in BINARY and encrypted with 3DES, using crypto API from Microsoft.
    3rd party software to encrypt the data stored in registry it
    either uses C++ code: and uses the call “CryptProtectData” and “CryptUnProtectData” or
    If it is a .NET (C#) it uses the call “Protect” or “UnProtect” from class “ProtectData” of WinCrypt.h from the library “Crypt32.lib.
    Note: The data is encrypted using auto-generated machinekey and there is no public key shared to decrypt the Encrypted data.
    Since the data is encrypted using auto-generated machinekey the same can be decrypted from a .Net / C++ application using CryptUnprotectData or UnProtect() API of WinCrypt.h from the library “Crypt32.lib.
    To know more about Auto-Generated MachineKey in Windows refer the links below
    http://aspnetresources.com/tools/machineKey
    http://msdn.microsoft.com/en-us/library/ms998288.aspx
    I need to find a way in Java to find the equivalent API to decrypt (CryptUnprotectData) and Microsoft will automatically use the correct key.
    But i couldn't find any informato related to Java APIs to enrypt or decrypt data using auto-generated machinekey.
    Is there a way to read the encrypted data from Windows regsitry settings that is encrypted using the Auto-Generated Machine Key ?
    Kindly let me know if Java provides any such API or mechanism for this.

    If the symmetric key is "auto-generated" and is not being stored anywhere on the machine, it implies that the key is being regenerated based on known values on the machine. This is the same principle in generating 3DES keys using PBE (password-based-encryption). I would review the documentation on the C# side, figure out the algorithm or "seed" values being used by the algorithm, and then attempt to use the JCE to derive the 3DES key using PBE; you will need to provide the known values as parameters to the PBE key-generation function in JCE. Once derived, it can be used to decrypt the ciphertext from the Regiistry in exactly the same way as the CAPI/CNG framework.
    An alternate way for Java to use this key, is to write a JNI library that will call the native Windows code to do the decryption; then the Java program does not need to know details about the key.
    That said, there is a risk that if your code can derive the key based on known seeds, then so can an attacker. I don't know what your applicatiion is doing, but if this is anything related to compliance for some data-security regulation like PCI-DSS, then you will fail the audit (for being unable to prove you have adequate controls on the symmetric key) if a knowledgable QSA probes this design.
    Arshad Noor
    StrongAuth, Inc.

  • Error 8 when starting the extracting the program-data load error:status 51

    Dear all,
    <b>I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). </b>The scenario and related setting are as the flowings:
    A. Setting:
    We have created 2 source system one for the development and another for the quality in BW development client
    1. BW server: SAP NetWeaver 2004s BI 7
    PI_BASIS: 2005_1_700 Level: 12
    SAP_BW: 700 Level:13
    Source system (Development Client 220)
    2. SAP ERP: SAP ERP Central Component 6.0
    PI_BASIS: 2005_1_700 Level: 12
    OS: SunOS
    Source system (Quality Client 300)
    2. SAP ERP: SAP ERP Central Component 6.0
    PI_BASIS: 2005_1_700 Level: 12
    OS: HP-UX
    B. The scenario:
    I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
    After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system – , but now I am unable to load the Info provider from the (Development Client 220),
    Source system Creation:
    For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
    1: Now while at the Info Package : Start data load immediately and then get the
    e-mail sent by user RFCUSER, and the content:
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Service API .
    2:Error in the detail tab of the call monitor as under,
    <b>bi data upload error:status 51 - error: Error 8 when starting the extracting the program </b>
    Extraction (messages): Errors occurred
      Error occurred in the data selection
    Transfer (IDocs and TRFC): Errors occurred
    Request IDoc : Application document not posted (red)
      bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
                                    IDoc sent to SAP system or external program"
      r<b>/3 side: status 51:  IDoc: 0000000000012140 Status: Application document not posted
                                   Error 8 when starting the extraction program</b>
    Info IDoc 1 : Application document posted (green)
       r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
                     IDoc sent to SAP system or external program"
       bw side: "IDoc: 0000000000007089 Status: Application document posted,
                     IDoc was successfully transferred to the monitor updating"
    Have attached screen shots showing error at BW side.
    •     check connection is ok, tried to restore the setting for bw-r3 connection – though same problem
    •     Have checked partner profile.
    <b>what's wrong with the process? </b>
    Best regards,
    dushyant.

    Hi,
       Refer note 140147.
    Regards,
    Meiy

  • Custom PL/SQL API that inserts the data into a custom interface table.

    We are developing a custom Web ADI integrator for importing suppliers into Oracle.
    The Web ADI interface is a custom PL/SQL API that inserts the data into a custom interface table. We have defined the content, uploader and an importer. The importer is again a custom PL/SQL API that will process the records inserted into the custom table and updates the STATUS column of the custom interface table. We want to show the status column back on the spreadsheet.
    Defined the 'Document Row' import rule and added the rows that would identify the unique record.
    Errored row import rule, we are using a SELECT * from custom_table where status<>'Success' and vendor_name=$param$.vendor_name
    The source of this parameter is import.vendor_name
    We have also defined an Error lookup.
    After the above setup is completed, we invoke the create document and click on Oracle->Upload.
    The records are getting imported, but the importer program is failing with An error has occurred while running an API import. The ERRORED_ROWS step 20003:ER_500141, parameter number 1 must contain the value BIND in attribute 1.'

    The same issue.
    Need help.
    Also checked bne.log, no additional information.
    <bne:document xmlns:bne="http://www.oracle.com/bne">
    <bne:message bne:type="DATA" bne:text="BNE_VALID_ROW_COUNT" bne:value="11" />
    <bne:message bne:type="DATA" bne:text="BNE_INVALID_ROW_COUNT" bne:value="0" />
    <bne:message bne:type="ERROR" bne:text="An error has occurred while running an API import"
    bne:cause="The ERRORED_ROWS step 20003:ER_500165, parameter number 1 must contain the value BIND in attribute 1."
    bne:action="" bne:source="BneAPIImporter" >
    <bne:context bne:collection="collection_1" />
    </bne:message><bne:message bne:type="STATUS"
    bne:text="No rows uploaded" bne:value="" >
    <bne:context bne:collection="collection_1" /></bne:message>
    <bne:message bne:type="STATUS" bne:text="0 rows were invalid" bne:value="" >
    <bne:context bne:collection="collection_1" /></bne:message></bne:document>

  • My firefox installation is complete on my PC with Win XP, the icons are up, but the program will not start... no process or anything in task manager... any idea what is going on?

    bought a second hand laptop running Windows xp. When I go to download firefox, the installation goes seemingly smooth, but the program will not open. There are no firefox processes showing in task manager when I do this. I just downloaded chrome instead, but it sucks and I want firefox but my computer rejects it. This computer runs every other program I use without a hitch
    == This happened ==
    Every time Firefox opened
    == after installation ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

    thanks chris for the reply back,i have solved the massive problem i have had with MF 3.6.3 it ws COMODO FREE FIREWALL i had a sneaking suspicion all a long it could have been that but was not sure?,my pc had slowed down since installing comodo i am pretty sure of that,there were lags and pauses ect ect on general usage of the pc even though cpu usage was ok?,so maybe if many pc users that have comodo firewall installed they might like to try a change to another firewall and see if it helps,i went back to OUTPOST FREE FIREWALL which i had for ages without ANY problems whatsoever.
    regards
    john
    mozilla firefox build 3.6.3

  • When i download any file it start in a second but when i pause the downloading file & after some time when i open it amessage flash 'download error' source file could not be read please try again later or contact the server administrator.

    when i download any file it works frequently and downloading start in a second but when i pause the downloading file & after some time when i open it,The downloading not start proper and after some time a message flash 'download error' source file could not be read please try again later or contact the server administrator.

    I downloaded the Microsoft Autoruns package and ran it.  There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab.  I also did the "netsh winsock reset" and rebooted.  It didn't fix the problem.  Any more ideas?

Maybe you are looking for