APO DP - use of tables for selections and notes

I am using APO DP V5.
I note that tables for holding selections and notes are planning area specific and have tables names such as /1APO/S1nnnnnnnn and /1APO/F1nnnnnnnn respectively.
My questions:
1. What is the logic for the naming of these tables
2. For a given planning area, are the tables names the same as one moves from Development to QA to Production environments
Thanks,
Bob Austin

Bob
I think the answer for the notes part of this question is here. The logic for the selections should be the same
Re: Updating of Notes for cells in APO DP
The table names might not be the same in QA since they are created independently and dynamically. But one way to check is to try it out

Similar Messages

HT1918 can I just use gift cards for itunes and not put a credit card on my account

can I just use gift cards for itunes and not put a credit card on my account

Welcome to the Apple Support Communities
You can do that without any problem. That's what some people do to purchase content from the iTunes Store, App Store or iBookstore

C# compiling error: 'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found (are you missing a using directive or an assembly reference?)

Hello experts,
I'm totally new to C#. I'm trying to modify existing code to automatically rename a file if exists. I found a solution online as follows:
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
while (allFiles.Contains(tempFileName ))
tempFileName = String.Format("{0} ({1})", fileName, count++);
output = Path.Combine(folderPath, tempFileName );
string fullPath=output + ".xml";
However, it gives the following compilation errors
for the Select and Contain methods respectively.:
'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found
(are you missing a using directive or an assembly reference?)
'System.Array' does not contain a definition for 'Contains' and no extension method 'Contains' accepting a first argument of type 'System.Array' could be
found (are you missing a using directive or an assembly reference?)
I googled on these errors, and people suggested to add using System.Linq;
I did, but the errors persist.
Any help and information is greatly appreciated.
P. S. Here are the using clauses I have:
using System;
using System.Data;
using System.Windows.Forms;
using System.IO;
using System.Collections.Generic;
using System.Text;
using System.Linq;

Besides your issue with System.Core, you also have a problem with the logic of our code, particularly your variables. It is confusing what your variables represent. You have an infinite loop, so the last section of code is never reached. Take a look
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.IO;
namespace consAppFileManipulation
class Program
static void Main(string[] args)
string fullPath = @"c:\temp\trace.log";
string folderPath = @"c:\temp\";
string fileName = "trace.log";
string output = "";
string fileNameOnly = Path.GetFileNameWithoutExtension(fullPath);
string extension = Path.GetExtension(fullPath);
string path = Path.GetDirectoryName(fullPath);
string newFullPath = fullPath;
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
//THIS IS AN INFINITE LOOP
while (allFiles.Contains(fileNameOnly))
tempFileName = String.Format("{0} ({1})", fileName, count++);
//THIS CODE IS NEVER REACHED
output = Path.Combine(folderPath, tempFileName);
fullPath = output + ".xml";
//string fullPath = output + ".xml";
UML, then code

I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem

I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem

grannybel
It would appear that you are destined for the Adobe Photoshop Elements Forum since your question is related to Photoshop Elements and not Premiere Elements which is the focus program where you have posted.
But, while the arrangements are being made, here are a few things for you to think about if you have not already
1. Reset Tools - Select Brush Tool, then
2. Delete Settings File
Go to Full Editor/Edit Menu/Preferences/General and click on the option "Reset Preferences on Next Launch".
We will be watching for your progress.
Thank you.
ATR

Table for Customer and vendor open balance on a key date

Dear All,
Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
I have checked with the below table :
Customer-KNC1, KNC3,BSID, BSAD
Vendor-LFC1, LFC3, BSIK, BSAK.
But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
Plesae let me know, how to go for it.
Please suggest.

Hi
Use BSID and BSIK for open items
And pass company code, year and from date and to date range in Posting date selection option
Reg
Vishnu

HT3354 how can i use one table for reference to another

how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
Here is an example of something you can do with two tables:
The table on the right is title "Data" and stores a list of names with age and favorite color.
The table on the left uses the value in the first column to lookup up information in the table Data
in the table on the left:
B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
I know this look complicated. so I'll break it up into smalled pieces:
first the "&" is called the concatenate operator and joins two strings. like this:
a string is a set of characters between double quotes.
so "string 1" & "string 2" becomes "string 1string2" or "Sam " & "Jones" becomes "Sam Jones"
you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
so if cell A1 contains "Hi " and the cell A2 contains "There" then A1 & A2 will result in "Hi There"
so you could add the formula
A3=A1 & A2
this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
OK. So the formula I provided concatenates several items together:
it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data". If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
You will find the Numbers users guide and function reference helpful. You can download then from Apple here:
http://support.apple.com/manuals/#productivitysoftware

Source tables for forms and tabular forms must have a primary key.

Why does HTML DB 2.0 return the message
"Source tables for forms and tabular forms must have a primary key."
when trying to generate a "Report and Form" page based on a view defined like "create view <applicationschema>.a as select * from <sourceschema>.b" ?
It should be possible for HTML DB to "see" that the table "<sourceschema>.b" already has a primary key.
bw - Christian

Christian,
In the create application wizard, when creating form or tabular form pages, you can only use tables with primary keys, and not views, because that wizard is automatically deriving the primary key from the table definition. If you want to build forms on views or tables without a primary key, you need to use one of the create form wizards while working on an existing application. Those wizards allow you to pick your own column as a primary key column.
Regards,
Marc

Methods used in cl_gui_custom_container for ALV and for what purpose

Methods used in cl_gui_custom_container for ALV and for what purpose and i want the exact senario for the usage of those method?
2. What events are used in ALV?
I anyone help me please,
Points will be awarded.
Thank you & Regards,
Jagrut BharatKumar Shukla

hey,
look at this sample code....
TABLES: SFLIGHT.
G L O B A L I N T E R N A L T A B L E S
DATA: GI_SFLIGHT TYPE STANDARD TABLE OF SFLIGHT.
G L O B A L D A T A
DATA: OKCODE LIKE SY-UCOMM,
 G_WA_SFLIGHT LIKE SFLIGHT.
Declare reference variables to the ALV grid and the container
DATA:
GO_GRID TYPE REF TO CL_GUI_ALV_GRID,
GO_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
S T A R T - O F - S E L E C T I O N.
START-OF-SELECTION.
SET SCREEN '0100'.
*& Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
CASE OKCODE.
 WHEN 'EXIT'.
 LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
Create objects
IF GO_CUSTOM_CONTAINER IS INITIAL.
 CREATE OBJECT GO_CUSTOM_CONTAINER
 EXPORTING CONTAINER_NAME = 'ALV_CONTAINER'.
 CREATE OBJECT GO_GRID
 EXPORTING
 I_PARENT = GO_CUSTOM_CONTAINER.
 PERFORM LOAD_DATA_INTO_GRID.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Form load_data_into_grid
FORM LOAD_DATA_INTO_GRID.
Read data from table SFLIGHT
SELECT *
 FROM SFLIGHT
 INTO TABLE GI_SFLIGHT.
Load data into the grid and display them
CALL METHOD GO_GRID->SET_TABLE_FOR_FIRST_DISPLAY
 EXPORTING
 I_STRUCTURE_NAME = 'SFLIGHT'
 CHANGING
 IT_OUTTAB = GI_SFLIGHT.
ENDFORM. " load_data_into_grid
* the Events are
ITEM_DATA_EXPAND, REPREP_SEL_MODIFY, CALLER_EXIT, USER_COMMAND, TOP_OF_PAGE, DATA_CHANGED, TOP_OF_COVERPAGE, END_OF_COVERPAGE, FOREIGN_TOP_OF_PAGE, FOREIGN_END_OF_PAGE, PF_STATUS_SET, LIST_MODIFY, TOP_OF_LIST, END_OF_PAGE, END_OF_LIST,AFTER_LINE_OUTPUT, BEFORE_LINE_OUTPUT, SUBTOTAL_TEXT, CONTEXT_MENU.
the methods used with the class CL_GUI_CUSTOM_CONTAINER are as follows......
IF_CACHED_PROPGET_NEXT_PROP, IF_CACHED_PROPSEEK_FIRST_PROP, IF_CACHED_PROP~SET_PROP, IS_VALID, FREE, GET_PROPERTY, SET_PROPERTY, CALL_METHOD, ASSIGN_PROPERTY, CALL_METHOD_RESULT_GUI_OBJECT, GET_PROPERTY_GUI_OBJECT, IS_CACHED_PROP, ADD_CACHE_PROP, REMOVE_CACHE_PROP, GET_CACHE_PROP, SET_CACHE_PROP, IS_CACHE_VALID, INVALIDATE_CACHE, GET_FOCUS, SET_FOCUS, SET_NAME, GET_NAME, GET_ENABLE, SET_ENABLE, DISPATCH, FINALIZE, GET_ADJUST_DESIGN, GET_GRID_HANDLE, GET_GRID_STEP, GET_HEIGHT, GET_LEFT, GET_METRIC, GET_MODE, GET_REGISTERED_EVENTS, GET_TOP, GET_VISIBLE, GET_WIDTH, IS_ALIVE, REG_EVENT_LEFT_CLICK_DESIGN, REG_EVENT_LEFT_CLICK_RUN_MODE, REG_EVENT_MOVE_CONTROL, REG_EVENT_RIGHT_CLICK, REG_EVENT_SIZE_CONTROL, SET_ADJUST_DESIGN, SET_ALIGNMENT, SET_GRID_HANDLE, SET_GRID_STEP, SET_HEIGHT, SET_LEFT, SET_METRIC, SET_MODE, SET_POSITION, SET_REGISTERED_EVENTS, SET_TOP, SET_VISIBLE, SET_WIDTH, GET_PATH, CONTROL_REGISTER_EVENT, CONTROL_UNREGISTER_EVENT, GET_EVENT_PARAMETER, GET_REGISTERED_EVENTS_EX, GET_WINDOW_PROPERTY, INIT_CONTROL, INIT_CONTROL_WITH_HWND, REGISTER_CACHED_PROPERTY, REGISTER_CACHED_W_PROPERTY, SET_REGISTERED_EVENTS_EX, SET_WINDOW_PROPERTY, UNREGISTER_CACHED_PROPERTY, UNREGISTER_CACHED_W_PROPERTY, GET_CONTAINER_TYPE, RESIZE, GET_INNER_WIDTH, LINK, GET_LINK_INFO, GET_INNER_HEIGHT, SET_MODE_FOR_ALL, GET_DYNPRO_CONTAINER, GET_FRAME_CONTAINER, GET_CHILD, ADD_CHILD, REMOVE_CHILD, REMOVE_ALL_CHILDREN, CONSTRUCTOR.

What is the use of table maintance generator and how it is used ddic

hi dear friends
i would like to know about how the table maintaience generator is used in ddic .i have the step by step processor of that but i would like to know importance and advantages of it .

Nani,
With the help of the table maintenance generator, you are able to maintain the ENTRIES of the table in SM30 transaction.
It can be set in transaction SE11 - Tools - Table maintenance generator.
Table maintanance Generator is used to manually input values using transaction sm30
follow below steps
1) go to se11 check table maintanance check box under attributes tab
2) utilities-table maintanance Generator-> create function group and assign it under
function group input box. Also assign authorization group default &NC& .
3) select standard recording routine radio in table table mainitainence generator to move table
contents to quality and production by assigning it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers this dialog box appears when you click on create button
6) save and activate table
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
SM30 is used for table maintenance(addition or deletion of records),
For all the tables in SE11 for which Table maintenance is selected , they can be maintained in SM30
Sm30 is used to maintain the table ,i.e to delete ,insert or modify the field values and all..
It creates the maintenance screen for u for the aprticular table as the maintenance is not allowed for the table..
In the SE11 delivery and maintenance tab, keep the maintenance allowed..
Then come to the SM30 and then enter the table name and press maintain..,
Give the authorization group if necessary and give the function group and then select maintenance type as one step and give the screen numbers as system specified..
Then create,,,
Then u will able to see the maintenance view for the table in which u can able to insert and delete the table values...
We use SM30 transaction for entering values into any DB table.
First we create a table in SE11 and create the table maintenance generator for that Table using (utilities-> table maintenance generator) and create it.
Then it will create a View.
After that from SM30, enter the table name and Maintain, create new entries, change the existing entries for that table.
For further help look into these links
http://help.sap.com/saphelp_46c/helpdata/EN/cf/21eb6e446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/69/c2516e4ba111d189750000e8322d00/content.htm
Table
Don't forget to reward if useful.....

Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

I dont know why the battery life of my iphone 4 is so low ! i really want to know how many hours i'll have if it's on standby. And how many hours if i use it normally for music and facebook (sometimes a little bit games)

i dont know why the battery life of my iphone 4 is so low ! i really want to know how many hours i'll have if it's on standby. And how many hours if i use it normally for music and facebook (sometimes a little bit games) !!!

to enhance your battery life, keep screen display to minimum, set screen lock automatically after 1 min, select internet notifications to off.

Using plsql tables in select statement of report query

Hi
Anyone have experience to use plsql table to select statement to create a report. In otherwords, How to run report using flat file (xx.txt) information like 10 records in flat files and use this 10 records to the report and run pdf files.
thanks in advance
suresh

hi,
u can use the utl_file package to do that using a ref cursor query in the data model and u can have this code to read data from a flat file
declare
ur_file utl_file.file_type;
my_result varchar2(250);
begin
ur_file := UTL_FILE.FOPEN ('&directory', '&filename', 'r') ;
utl_file.get_line(ur_file, my_result);
dbms_output.put_line(my_result);
utl_file.fclose(ur_file);
end;
make sure u have an entry in ur init.ora saying that your
utl_file_dir = '\your directory where ur files reside'
cheers!
[email protected]

How to find R/3 table for FI and PS Datasources

Hi,
Can anyone tell me that how can we find SAP tables for FI and PS datasources in BI. Please provide information as it is urgent. Points will be assigned
Thanks
Shanthi

Hi,
To find DS assigned to a table.
How to find the Datasources for the given table names ?
How to find the Datasources for the given table names ?
To find Tables assigned to a DS.
USe Extractor Checker RSA3. Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
retrieve data and present it to you.
Note: Set the break point in the Extractor Function module.
View the ST05 Extended Trace list. The Object name shows the Tables accessed.
Thanks,
JituK

Taking long time filling the setup tables for sales and shipment

Hi ,
I am trying to fill the setup tables for sales and shipment and it is taking lot of time .
It took 16 hours just to bring 6 months of sales history data in the test environment .
Cn anybody help on this issue why it is taking that much of time ...
I am trying to load the sales data from R/3 into APO-BW from 2005 to 2007 .......
It is taking 16 hours to fill the data for only 6 months .

Hi,
1. delete data and refill the setuptables again by spliting to several small pieces.
2. compare the data. wht is the last Document numner in RSA3(Maximum one). Start from Maximum one. may be bit complex approch.
you need to check with PSA and base tables.
keep one thing in your mind you need to check againest MSEG and BSEG only. noy BKPF and MKPF.
correct if i'm wrong.
either refill or create a user exit to avoid duplicae records(you should have very good understanding of data, it will lead to inconsitent data for delta records).
User exit not a good solution. it's one possibility.
****Assign Points If Helpful****
Regards,
Ravikanth

I cant turn on the coockies when i go to the tools --- options--- privacy and choose use custom sitting for history and click OK. Then o go back nothing changed

i cant turn on the coockies when i go to the tools --->options--->privacy and choose use custom sitting for history and click OK. Then o go back nothing changed

Note that the "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings. 
Firefox shows the "Use custom settings for history" selection as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made. 
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History" (Never remember history means that Private Browsing mode is active).
"Use custom settings for history" stays selected if at least one of the History or Cookie settings is not the default to make you aware that changes from the defaults are made.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
If you do not keep changes after a restart then see:
*http://kb.mozillazine.org/Preferences_not_saved

APO DP - use of tables for selections and notes

Similar Messages

Maybe you are looking for