App for customers

Dear all,
Please help me in this
Can we receive amounts from customers through APP. If YES please tell the procedure. If NO ten why customer tab is there in APP.
If I configure a payment method for incoming amount then options are showing as (debit notes, BOE, payment demand, card etc). will this mean that we cannot receive cheque payments from customers.
Please provide clarity on this.
regards
Raghuram

Hi Raghu Ram
That depends on the business scenarios
1. Lets say you have to bill to customer monthly and against you have asked your customer to register for RTGS monthly payment for a fixed amount for a specific duration
in this case you can choose Electronic transfer method
2. Lets say you have to bill to customer monthly and against you have already collected post dated check from your customer
in this case you use Check Payment method
So it depends from case to case
Regards
sandeep

Similar Messages

How run app for customers and how to send dunning notice to vendors

Hi experts.
Can any one help on following issue with example scenarios.
how run app for customers and how to send dunning notice to vendors

Hi,dear
you should enter customer account numbers in f110 for payment receiving from customer, and assign dunning procedure to vendor master record and process the dunning to vendor by using f150.
regards,
nagesh.

How process app for customers, and how to send dunning notice to vendors

Hi experts,
can any one help on this
how process app for customers, and how to send dunning notice to vendors
Thanks & regards,
vinod
Moderator: Please, read and respect SDN rules

Hi,dear
you should enter customer account numbers in f110 for payment receiving from customer, and assign dunning procedure to vendor master record and process the dunning to vendor by using f150.
regards,
nagesh.

Releasing app for customers

Hi,
the company I work for delivers a client-server application.
For our customers we would like to create a stripped down client for the iPhone platform.
Since this application would only be usable for a small number of people, I don't think it belongs in the appstore.
However, 100 users might not be enough.
We do not have more than 500 employees.
How would we go about getting an application to our customers?
Do we need a standard or enterprise program?
Is it at all possible to provide customers with iPhone applications outside the appstore?

Ewoudvdv wrote:
Are enterprise program participants allowed to distribute to their customers?
I believe distribution is limited to employees (and likely needs to be done over a corporate intranet).
On the other hand, presumably you would incorporate some way to restrict access into the app, so possibly a free app distributed via the App Store may work even though it's clearly not going to be 'general use'; not sure that it would make it past the vetting process, but depending on the resources you'd need to develop the app, it may be a worthwhile risk (and may be a better way to get Apple's attention).
Good luck!

Verizon please release a Home Fusion Data Usage Tracking Tool for customers

Just switched to Home Fusion. It works quickly but data usage has gone up dramatically. Why?
In the past, with my MiFi hotspot, I could use Verizon website tools to view usage per session to see when data was being used.
Verizon has no tools for customers to view usage during data sessions on their Home Fusion.
The only tool available is a worthless display of the "packets" used during the current session and the number of hours connected.
We cannot view past data sessions or a measure of mb or gb used for even the current session, let alone past sessions.
Verizon, please release an application that gives customers the ability to see when data is being used by their Home Fusion wireless connections!!!!
You will continue to receive complaints from customers on your forum and by phone if you don't give us the tools we need to see when data is being used at the very least.
My data usage has jumped up dramatically. The only help you'll give is for me to call Tier 2 support and have them list off my past data sessions and the amount of data used. Perhaps I'll call more regularly so they'll get annoyed and get an app for customers to see their data for themselves.
Your refusal to put detailed data usage in the hands of your customers makes me think forum complaints of your Home Fusion using data when all computers are off might be valid and suspect you may be trying to hide a problem with your data usage billing.
How can I dispute my data usage if you won't allow access to more than the total usage YOU claim I've used?
Make this customer tool a TOP PRIORITY. If I'd known data usage would jump and there'd be nothing to document the reason, I'd have cancelled within the 14 days. Wish I was quicker to investigate.

EXACTLYYYYYYYYYYYYYYYYYY! Starting March of this year, My bill has ESCALATED to the $1,000 mark and I'm FED up with their STEALING MY DATA. I have had the box TURNED OFF THIS BILLING CYCLE JUST TO SEE. June 16 was the first day. We had to go out of state so I made sure that Home Fusion box was OFF.. We returned the following night around 1130 pm and NINE GB of data was used on the 16th and we were NOT home AND THE BOX WAS TURNED OFF. THEY CANNOT EXPLAIN, WILL NOT REFUND, ETC.................. BeckyInEastLeroy

Cheque for Customers

Hi,
I faced a strage issue. We have a customer and he is having 100000 worth credit note.
He dont want do business with us, so we have to pay the 100000 to him.
And we want to pay the amount in the form of cheque.
How can it be configured in system.
Please guide me
Prasad

Hi Neeraj,
Thanks for quick reply and i solved the issue my self.
I posted a payment document in FB01 with document type KZ.
After i issued manual cheque to customer through FCH5.
Another solution is:
we can run the APP for customers also if they are having credit balances.
Sateesh

APP (f110 ) for customers

Can we process the APP (f110 ) even for customers. If yes how can we and in which situation. Kindly answer me......
Regards,
Afreen.

As you said we can make payment even to customer through APP run in F110, when a comapny has debit note to pay. So as per SAP standards through APP we can have 4 types of payment methods..
C = Check
D = Customer Collection
F = Foreign Bank Collection
T = Bank Transfer is it so................
As per SAP Payment Method Classification are (in FBZP Payment Method per country)
1. Bank Transfer
2. Check
3. Bill /ex.
4.check/bill/ex
Am I right........

How do I get The ipad locked to run only one application for customers (perhaps a webapp)

how do I get The ipad locked to run only one application for customers (just one web app, or video- instructions, or just safari). What I really want is that my customers to only use one app that has all my services. It is an interactive app so I would not like them to go surfing elsewhere while they are in my store.
Is it possible to do this on the iPad ?

Try this:
LabVIEW Champion . Do more with less code and in less time .
Attachments:
checkbox - clusters_MOD.vi ‏23 KB

"This code is only Valid for customers of the USA Store.", "This code is only Valid for customers of the USA Store."

I get this error message when redeeming an app from the apple "Aproved" website "Appexchanger" which is when you check out free apps and get credits to get paid apps, but i am in canada and everytime i go to redeem one i get "This code is only valid for customers of the USA Store." i think this is unfair because ive done what theve asked and theres nothing on the site that says "US ONLY" and the people who made it wont even contact me back! Please help i just want some apps!

Just FYI, Appexchanger is not "approved" by Apple in any way that I can detect. Apple does not appear to have any connection of any sort with that company other than as a customer.
This company looks to me to be nothing more than a way to harvest email addresses and other content information to sell to other companies, getting you onto all sorts of spam lists. I don't for one minute believe their claim that they won't sell your information (and if they don't, it's s good bet at least one if nor more of the developers will). But in any case, as Jay said, any problems or issues you may have with that company will have to be taken up with them. This is not an Apple issue.
Regards.

Microsoft Apps for Belle

Hi
Does anyone have information regarding availability of Microsoft Apps for Belle for N8

Thanks for your reply, svi78. Only, I feel a bit disappointed for the confusing communications around this subject, on generic blogs/tech news but on Nokia sites as well.
Just an example, from this page: http://europe.nokia.com/find-products/nokia-belle-update/nokia-belle-update-faq?intc=ncompromolp-fw-...
"When are the Microsoft applications available for Nokia Belle phones and how do I get them?
The Microsoft apps including Microsoft Lync 2010 Mobile, Microsoft PowerPoint Broadcast, Microsoft Document Connection and Microsoft OneNote applications are available as an extra software update over the air via the software update app on your phone or via Nokia Suite. (Note: For E6 Microsoft apps are available for download only via Nokia Suite.)
The rollout has already started and the Microsoft apps update is available for customers who have Belle software on their phone and a productcode that belongs to Finland, India, United Kingdom, Brazil, Germany, China, Netherlands, Italy, Spain, Turkey, Russian Federation, South Africa and Mexico. Other countries will follow in the next few weeks. Please note that Microsoft apps for E6, N8 and Nokia 500 will be available at a later point."
Since I bought an official Italian 701 thinking that a native Belle phone would have been included in the enabled ones, I have to say the above statement is untrue, or misleading at least... Not to mention the lack of a support page for the 701 on Nokia Italy's web site, or the recently discussed issues about compatibility reinstalling Belle FP1 via NSU or Nokia Suite on the 701 itself. But these rants belong to other threads.
Cheers...
m

Solaris 10 5/08 live upgrade only for customers with serviceplan ?

Live upgrade fails due to missing /usr/bin/7za
Which seems to be installed by adding patch 137322-01 on x86 according to release notes http://docs.sun.com/app/docs/doc/820-4078/installbugs-114?l=en&a=view
But this patch (may also be the case for Sparc patch) are only available for customers with a valid serviceplan.
Does this mean that from now on its required to purchase a serviceplan if you would run Solaris 10 and use the normal procedures for system upgrades ?
A bit disappointing ...
Regards
/Flemming

Live upgrade fails due to missing /usr/bin/7za
Which seems to be installed by adding patch 137322-01 on x86 according to release notes http://docs.sun.com/app/docs/doc/820-4078/installbugs-114?l=en&a=view
But this patch (may also be the case for Sparc patch) are only available for customers with a valid serviceplan.
Does this mean that from now on its required to purchase a serviceplan if you would run Solaris 10 and use the normal procedures for system upgrades ?
A bit disappointing ...
Regards
/Flemming

Change e-mail used for customers inquiries

Dear all,
We have a B2B application set up, and the customer would like to change the email where the customers can send their questions . (The form used is the one under contacts -> e-mail ) As I was not present during the system set-up, I don't know what kind of customizing or developing has taken place . Could someone point the appropriate way to do this ?
Thank you

Hello Markos,
Please open XCM administration of the B2B application and under General application settings-->Customer, there is a component called lwc. It is under this node, that the email address, mail server and port are configured.
You can change the value of the email address here and restart the app for the settings to take effect.
Hope this helps.
Pradeep

Playmemories app for Windows phone

I have recently bought the HDR-AS100VR action cam, and has desperately beeb looking for the Playmemories app for my also recently acquired Windows phone. This however seems futile. I can find several post in here and others on the internet dating back from 2013 discussing why this app is not available for Windows smartphones. Sony (and Microsoft) please make an effort to help your loyal customers and see to it that this app is made available ASAP instead of pushing them into using other devices, which will be the result id nothing happens.

Hi Kasper,
The PlayMemories Mobile app is only available in iOS and Android devices. It is also available for Vaio running Windows 8 and 8.1. We understand that you'd want to control the camera or send pictures to your mobile device. We will take not of this and forward it to the engineering department for future product developments.
Please refer to this other thread for suggestions on how to control the camera in a Windows phone. http://community.sony.com/t5/Cybershot-Cameras/Playmemories-app-for-Windows-phone/td-p/167875/highlight/true/page/8
For further assistance with your concern, we recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
If my post answers your question, please mark it as "Accept as Solution". Thanks_Mitch

App for billing, time management for contractor..

Need an app to keep expenses, time billing by job or project for construction jobs. Need to be able to attach notes--would like to be able to generate on the spot invoice for customers and email copy to home office. Also, would like sketch pad with graph paper to sketch projects.

It's not likely likely you are going to find a simple app to do all of that. Ther are some enterprise solutions, such as Prolog, but that won't be cost effective if you are a small operation.
Best bet is to search the app store. A lot of what you want to do will not necessarily be construction specific, so keep that in mind when setting search terms.
You might want to look into Construction Superintendant, Construction Estimating App, Construction Daily Report. No first hand experience, so just a lead, not a recommendation (my company uses Prolog).

Single App for teams how do I give it to a client

I just got Acrobat Single app for teams. Confirmed purchase. How do I gave it to a client?
Nothing has come up in "Manage Your Team" panel.
I got an e-mail telling me to download and install, but I already have it with my team seat.
Why would I want to download and install?
How do I assign this single app to another user not on my team account?
Any help would be appreciated

Hi DanielW2011,
I have checked all the resources, at present the only option to buy is through reseller, I know it does not fulfill your expectation.
You can also check the press release : http://blogs.adobe.com/ukchannelnews/2013/08/05/creative-cloud-single-applications-now-ava ilable/
It states:
"Membership Plans and Availability The new single app plan of Adobe Creative Cloud for teams is available for a suggested retail price of $29.99 (US) per user per month. Existing customers with CS3 or later are eligible for single app membership at a suggested retail price of $19.99 (US) per user per month. Customers can pre-order beginning today, with product availability expected August 15. Both the complete and single app plans are available via reseller partners worldwide. The complete plan is also available directly from adobe.com. For more information visithttp://www.adobe.com/products/creativecloud/teams.html."
Regards,
Rajshree

App for customers

Similar Messages

Maybe you are looking for