App List Remembering Location issue

I can't seem to figure this out. Before the Froyo update, I was able to scroll through my app list, click on an app that starts with say an "L", exit the app, go back to my app list and be in the same position of the "L" apps. But now, after the froyo update the app list always resets to the beginning of the list starting with "A's". It's more annoying than an issue and a coworker got the Epic from Sprint and his phone works fine. Any ideas on how to get the app list to remember my location when scrolling and exiting? Thanks!!

hello. I also noticed this as well right after the 2.2 update. from what i have noticed is that if you open the app drawer and scroll to an app and select it and then when its closed the app drawer will reopen at the top of the drawer. but if you open the app drawer and scroll to any point in the app drawer and then close out and return to the homescreen and then again reopen the app drawer it will go right back to the point that you scroll down to. I`m assuming that once you select an app it will restart the app drawer from the top but by not selecting an app it assumes that an operation started hasn`t completed yet and remains in the position last left but thats just an uneducated guess at best. i have yet to find a setting that allows for customization of the app drawer.

Similar Messages

  • This may be more of an OS issue than a Curve issue but here goes. How do you remove the installed apps list on my 8530's AppWorld?

    I have never purchased any apps yet but I have tried quite a few and now I'm stuck with this list of more than 20 apps listed in the Uninstalled section of my 8530's Blackberry App World.
    As they are ALL free apps that I tried and DON'T installed on my phone for one reason or another, I would like to remove any existence of these apps from my phone and/or my App World Account.
    Any suggestions would be welcome.
    Regards
    Evil Dave of Canada
    What Part of 'Evil' do you not understand?

    Hello,
    What you ask cannot be done. The AppWorld servers forever remember every app you download to your BB, free or not. Consider the alternative...if those were paid apps and RIM did not retain the purchase record, then when you want the app back later, you'd have to pay again...not a good situation I'd think.
    And, before you say it...I agree...I think that they should be able to differentiate between free and fee-based apps. But, they don't. That's just the way it works.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Muse is NOT Working, Illustrator Update FAILS, Apps list is NOT Correct. What Do I Do?

    I started having issues with CC a couple months ago out of no where. Mostly just with updates from CC for the apps.
    I did the suggested re-installs of CC and then had to try to update by fully re-installing apps and I had funciontality but errors trying to update Illustrator and most of the installed apps did not show up in the CC interface.
    Now I try to do a quick update to a site thru Muse and it tells me that it would not validate my subscription and would be canceled in 2 days.
    I again followed instructions on Adobe to delete a couple of folders and try to re start Muse.
    Now I get an unexpected error and cnont use the program.
    I test out CC for updates and the Muse app shows up to date, Bridge app surprisingly updated fine, and as expected, once again, Illustrator errors out on the update and still my CC app list is not correct so I honestly dont know what updates I have to do on the other programs.
    I checked my subscription details and everything is fine.
    Not having the ability to update efficiently from CC is not a huge deal as long as I can use the programs to work. Not being abel to work because of some programing hiccup is NOT ACCEPTABLE.
    Anybody have any possible paths to fix these latest issues?
    Should I start by wiping the machine clean of any installs and then completely try to re-install everything?
    what a pain.

    UPDATE:   
    I got home tonight and tried to open up Muse.
    This time it opened up the login screen and actually made it past the point it errored at previously.
    Illustrator update stilll gives an Error 8.

  • First letter shortcut in app list view - Lumia 800

    Hi all, 
     I recently downloaded a couple of apps of my Lumia 800 and I noticed that the app list view has been rearranged in to groups by the first letter of the apps name. Although I find it functional and overall it looks well, I’d like to know if this can be turn off. The only downside I see is that I find myself scrolling down a for longer period of time.
    I appreciate any support.  
    Thanks.  
    Solved!
    Go to Solution.

    This subject has been discussed before, and it is a built in feature that automatically triggers once the number of apps reaches a certain level so you can quickly search for a specific app in a long list. It is a built in feature and cannot be changed AFAIK, there may be changes in future updates, but I doubt it, Personally I find it very useful, and assume most users do as this is only the second thread I've seen mention it as an issue, and as the number of apps available for WP increases I would assume it will become even more useful. The only way to remove for now, as far as I can see is to remove apps you don't use/like untill your list is short enough not to require it. Also, this is a software issue and it may be worth commenting in the Microsoft Windows phone forums, as they may be able to give more SW issue related info ?
    http://social.microsoft.com/Forums/en-HK/windowsmobilesuggestions/threads
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Hp 2540 NAMING THE PRINTER SO IT SHOWS IN THE 8.1 ALL APPS LISTING

    HP2540 8.1 START MENUE   ALL APPS  NO DISPLAY OF PRINTER NAME SHOWN. HOW TO GIVE IT A NAME? 

    Hi @firebird9, 
    Thank you for visiting the HP Support Forums! I see you would like to add your Deskjet 2540 Printer Assistant to your Windows 8.1 Applications list.
    Please click on the link below to get started pinning your favourite items to your Apps list:
    http://windows.microsoft.com/en-us/windows-8/start-screen-tutorial
    I hope this helps!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I have an ipod touch 4th gen.  It is refurbished.  The problem I am  having is with glitches....although they, for now, seem to be limited to the Temple Run 2 app.  I have tried the app in several locations to test other wi-fi...suggestions??

    I have a 4th gen Ipod touch - refurbished.  (second refurbished this month....the first had to be replaced by Apple.)  I have having issues with glitching - specifically in the Temple Run 2 app.  I have tried the app in several locations to make sure it wasn't just my wacky home wi-fi causing the glitch.  I have deleted and then reinstalled the app....  Any suggestions?

    Since you really did not say what you meant by "glitching" it could be a network or server problem. have you contacted the developer/went to their support site?

  • Oracle Apps Database severe Performance Issue

    Hi Gurus,
    This is regarding a severe performance issue running in our Production E-Business Suite Instance.
    its an R12.1.3 setup installed with 11.2.0.1 Database. All the servers are Solaris Sparc 64 (Solaris 10)
    Let me brief you about the instance first:
    2 Node Application
    - Main Application Server hosting web/forms/concurrent/admin servers
    - iSupplier server hosting web services (placed in DMZ, used by external suppliers via Internet)
    1 Node Database Server
    Database Server Specs
    Memory: 144G phys mem 20G total swap
    - CPUs (8Px4cores, 2Px2cores)
    - I/O - fiber channel hard disk (hitachi SAN Storage) - 7 DATA_TOPs (7 drives with RAID 5) - current DB size 1.6 TB
    - at peak load, around 1000 concurrent forms session and 2000 web sessions.
    We have been facing some serious performance issues and we raised an SR with Oracle Support.
    The Support analyzed a bunch of AWR Reports we provided them and they asked us to increase the DB_CACHE from its current usage of 27G to 40G
    So, we changed SGA_TARGET from 35G to 50G and PGA was increased from 35G to 40G as v$pgastat was also suggesting some lack of memory.
    We made these changes last night.
    Today morning we observed the following:
    1. after start of office hours, we checked in the home page of EM DB Console that ADDM was showing reduced impact due to lack of SGA memory which seemed to be a good sign. Earlier it was around 25% which was now at 12%.
    However, negative aspects were:
    1. lot of swapping was reported by the System Administrators on the DB Server
    2. High CPU Usage
    3. EM DB Console showed a lot of "Concurrency Wait Class" events ...throughout the day lot of blocking sessions were reported which were making other sessions to wait.
    in the AWR Report, following foreground reports were listed:
    Top 5 Timed Foreground Events
    Event
    Waits
    Time(s)
    Avg wait (ms)
    % DB time
    Wait Class
    DB CPU
    132,577
    61.46
    library cache lock
    3,539
    40,683
    11496
    18.86
    Concurrency
    library cache: mutex X
    4,014,083
    21,011
    5
    9.74
    Concurrency
    db file sequential read
    4,138,014
    20,767
    5
    9.63
    User I/O
    latch free
    381,916
    5,897
    15
    2.73
    Other
    This is showing "library cache lock" events as the main culprit apart from the usual suspect, the CPU.
    I am attaching the AWR Report. Please let me know if  i should revert back the memory changes or is there anything else i could do.
    Please help us resolving it because the performance is going worst.
    Regards,
    Muneer.

    Pl do not post duplicates - Oracle Apps Database severe Performance Issue
    For all critical production issues, pl work with Support thru SRs - using the forums to troubleshoot production issues is not wise

  • Callmanager Conferencing with remote locations Issue

    I am new to using callmanager, and I need a little help.
    I have created a meet me number on my callmanager. Once a session is begun, all local network users are able to join the conference call with no problems..
    If a remote location hosts a meet me call, all my local network users are able to join THAT session with no problems as well.
    But if I host a meet me session on MY local network, remote locations CANNOT reach my session. The line remains silent when they dial in.
    I've been told to check the codecs which seem fine and we are checking for a firewall issue, but all normal calls local and remote work just fine. It's only the conference bridging that causes issues.
    Please help.
    Thanks

    Hello,
    Thank you very much for replying.
    The configurations, I've been told, are correct. G711 for intrasite and G729 for intersite. And region and device pools correct as well.
    I presented the HW conf bridge solution to a coworker who said it makes sense, but at this time, I don't have access to a hardware conference bridge. Is this the only solution? 
    From: prbt
    To: Nichole Ketchum
    Sent: Wednesday, August 3, 2011 1:54 PM
    Subject: - Re: Callmanager Conferencing with remote locations Issue
    Cisco Support Community
    Re: Callmanager Conferencing with remote locations Issue created by Priya B.T in Unified Communications Applications - View the full discussion
    hi,
    please check the following on the call manager,
    -  Check the region configuration on each device pool.
    -  Then check the region configuration between the two regions.
    -  One of the best practices followed by Cisco is, the intrasite region settings should be g711.
    -  And the region settings between inter site should be g729.
    -  G729 is not supported by software conference bridge, it is only supported by hardware conference bridge.
    -  So add the hardware conference bridge to the MRGL of the phone.
    -  And the hardware conference bridge has to be first in the list, that is before the software conference bridge.
    please let me know if this helps or we can do further trouble shooting on this issue.
    Reply to this message by going to Cisco Support Community
    Start a new discussion in Unified Communications Applications at Cisco Support Community

  • I tried to add my Planner Plus to my calendar and it gave me a message that says "This app does not have access to your calendars."  You can enable access in Privacy Settings.  But when I go to Privacy Seettings, there are no apps listed under Calendar.

    I am trying to access my calender in the app Planner Plus and I get the message. "This app does not have access to your calendars."  You can enable access in Privacy Settings.  But when I go to Privacy Settings, there are no apps listed under Calendar.  Anyone?

    Oh my gosh. This worked perfectly!!!
    After allowing the changes, I just had to open the apps again (such as Instagram), then the pop-up asking to allow access to Photos appeared!
    And I thought I was going to get rid of my iPhone 4 already because of the issue.

  • CC app list not working.

    When I open creative cloud on my mac, it says there's a download error with my apps list.
    This happened as soon as I tried to install the trial for After Effects and I have tried restarting the client and the issue still persists, any help?

    Boomboybooms please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve download errors.

  • Module web app list tags - how to start a list to not include the first one?

    Hi
    I have two panels displaying a web app list and want them to follow on from each other, so panel one displays the first one {module_webapps,24027,l,,,,false,1,false,1} and then the second panel displays the 2nd and 3rd.
    How would I go about it?
    Thanks
    J-P

    Hello
    Hope the below helps
    http://prasantabarik.wordpress.com/2013/09/26/pass-querystring-value-from-sharepoint-page-to-app-partclient-web-part/
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • App list does not appear. Why does it take longer?

    App list does not appear. Why does it take longer?

    Hi smilekick,
    Are you using Windows or Mac? Are you on a managed network. If no Try signing out and signing in of CC desktop. If still the same issue remove CC desktop, run the cleaner tool: http://www.adobe.com/support/contact/cscleanertool.html and try installing again.
    Create a new user account and check whether the same issue persists.
    Regards,
    Romit Sinha

  • I upgraded my iPad (3rd gen) to iOS 7.  When I go to iTunes and look at the summary and to the "Apps" list tab, iTunes stops working and shuts down.  What can I do?  I am using a Windows 7 machine.

    I upgraded my iPad (3rd gen) to iOS 7.  When I go to iTunes and look at the summary and to the "Apps" list tab, iTunes stops working and shuts down.  What can I do?  I am using a Windows 7 machine.

    Hi thanks for the encouragement.  It's not that the severs are "swamped", iOS 7 has been successfully installed.
    I can't access the apps list in iTunes because it *****
    down.  Its pretty frustrating because many of my apps require me to manually transfer files into iTunes first to view
    them.  Not sure if the servers being swamped is an issue for me, unless they release a bug fix through another version of iTunes.
    Has anyone else had this problem?  My iPad is pretty useless unless I can access my app list in iTunes....

  • REM pull list storage location

    hai gurus,
    i have one issue in rem pull list storage location.
    1) Fert = product A  and ROH = product B
    2) storage location in MRP 2 view for fert = 1000 and ROH production storage location is 1000 and external
        storage location is 2000.
    3) after procuring ROH from outside and doing MIGO the material is in 2000 storage location .
    4) While doing MF60 i had given rep storage location as 2000, but when viewed the stock status under
        MMBE  the stock is lying only in 2000 storage location area ,it is not posted to 1000 area.
    How to do the posting , as when i done MF60 i got the msg as - posting made sucessfully.
    with regards,
    sekar chand

    as there is no answers ,  i am closing this
    thread.
    regards,
    sekar chand

  • My "find my iPhone" app says "old location"

    my "find my iPhone" app says "old location" in regards to the location of my iphone. does that mean phone can't be tracked if the phone is off or charge is lost?

    Hey there shagzoo,
    I see that you are having an issue with your iOS device regarding Find my iPhone. I have an article for you that outlines some troubleshooting steps for this issue and can help address your question:
    iCloud: Troubleshooting Find My iPhone, iPad, iPod touch, or Mac - Apple Support
    https://support.apple.com/en-us/HT204233
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

Maybe you are looking for