Append to an existing report

Hi Everyone,
Is there a way to append a report to another existing one. I mean, I have already saved and closed a report as a HTML and I want open and add more data and figures to it. I'm using LavVIEW 8.0.
Any help would be appreciated.
Mike
Message Edited by q123456789 on 02-10-2007 01:18 AM

Hello Mike,
I could not find a VI that would open an existing HTML report. Without an "Open Report" VI, you cannot get a reference to your pre-existing HTML report. I recommend opening both html files as text files, concatenating those strings and then replacing the pre-existing HTML file with the combined string. I tested it with just adding some line breaks at it seemed to work fine. Let us know how it works for you.
Cheers,
NathanT

Similar Messages

Adding a new Field to an existing report

Hi all,
Can anybody tell me, how to add an extra field in existing
report, without changing the basic calulation, which i made
in the same report.
Regards
Hema

okay... that is not a standard program.
sombody developed it.following is my existing code, here in last column i want to add BOM(mast-stlnr) and Component(stpo-idnrk). remaining things are okay.
REPORT ZPOTREND NO STANDARD PAGE HEADING
                  LINE-SIZE 195
                  LINE-COUNT 60(3)
                  MESSAGE-ID Z1.
TABLES: EKBE,
        MARA,
        TCURR.
SELECT-OPTIONS: S_GJAHR FOR EKBE-GJAHR,
                S_BUDAT FOR EKBE-BUDAT DEFAULT SY-DATUM NO-EXTENSION,
                S_MATNR FOR EKBE-MATNR,
                S_WERKS FOR EKBE-WERKS DEFAULT 'CE',
                S_MTART FOR MARA-MTART.
PARAMETERS: X_APP_L TYPE P DECIMALS 2 NO-DISPLAY,
            X_APP_H TYPE P DECIMALS 2 NO-DISPLAY,
            X_DTL   AS CHECKBOX.
DATA: BEGIN OF I_EKBE OCCURS 0,
      BUDAT LIKE EKBE-BUDAT,
      MENGE LIKE EKBE-MENGE,
      DMBTR LIKE EKBE-DMBTR,
      SHKZG LIKE EKBE-SHKZG,
      EBELN LIKE EKBE-EBELN,
      MATNR LIKE EKBE-MATNR,
      WERKS LIKE EKBE-WERKS,
      MTART LIKE MARA-MTART,
      MEINS LIKE MARA-MEINS,
END OF I_EKBE.
DATA: P_EBELN LIKE EKBE-EBELN,
      P_MATNR LIKE EKBE-MATNR,
      P_WERKS LIKE EKBE-WERKS,
      P_MTART LIKE MARA-MTART,
      P_MEINS LIKE MARA-MEINS.
DATA: BEGIN OF YMTH OCCURS 10,
      YYMM(6),
      MTH(3),
      COL TYPE I,
      MENGE LIKE EKBE-MENGE,
      DMBTR LIKE EKBE-DMBTR,
END OF YMTH.
DATA: S_YMTH LIKE YMTH OCCURS 10 WITH HEADER LINE.
DATA: W_YMTH LIKE YMTH OCCURS 10 WITH HEADER LINE.
DATA: G_YMTH LIKE YMTH OCCURS 10 WITH HEADER LINE.
DATA: S_FLAG.                                               "MTART FLAG
DATA: BEGIN OF CDATE,
      YYMM(6),
      DD(2) VALUE '01',
END OF CDATE.
DATA: SDATE LIKE SY-DATUM.
DATA: CMTH(6),
      PMTH(6),
      LMTH1(6),
      LMTH2(6),
      MTH(2).
DATA: W_MENGE LIKE EKBE-MENGE,
      W_DMBTR LIKE EKBE-DMBTR,
      W_MENGE1 LIKE EKBE-MENGE,
      W_DMBTR1 LIKE EKBE-DMBTR,
      W_TOTAL TYPE P DECIMALS 2,
      W_COL TYPE I,
      WTEXT(18),
      APP TYPE P DECIMALS 4,
      APP1 TYPE P DECIMALS 4,
      APP2 TYPE P DECIMALS 4.
PERFORM GET_YMTH.
SELECT P~BUDAT P~MENGE P~DMBTR P~SHKZG P~EBELN P~MATNR P~WERKS
       Q~MTART Q~MEINS
       INTO TABLE I_EKBE
         FROM EKBE AS P INNER JOIN MARA AS Q
       ON P~MATNR = Q~MATNR
       WHERE P~GJAHR IN S_GJAHR
         AND P~BUDAT IN S_BUDAT
         AND P~MATNR IN S_MATNR
         AND P~WERKS IN S_WERKS
         AND P~BEWTP = 'E'
         AND Q~MTART IN S_MTART.
FORMAT INTENSIFIED OFF.
IF X_DTL <> 'X'.
   LOOP AT I_EKBE.
      I_EKBE-EBELN = SPACE.
      MODIFY I_EKBE.
   ENDLOOP.
ENDIF.
SORT I_EKBE BY WERKS MTART MATNR EBELN BUDAT.
LOOP AT I_EKBE.
CMTH = I_EKBE-BUDAT(6).
IF P_WERKS IS INITIAL.
    P_WERKS = I_EKBE-WERKS.
    P_MTART = I_EKBE-MTART.
    P_MATNR = I_EKBE-MATNR.
    P_EBELN = I_EKBE-EBELN.
    P_MEINS = I_EKBE-MEINS.
    PMTH = CMTH.
ENDIF.
IF P_WERKS NE I_EKBE-WERKS.
    PERFORM CHG_MTH.
    PERFORM CHG_MATNR.
    PERFORM CHG_MTART.
    PERFORM CHG_WERKS.
ENDIF.
IF P_MTART NE I_EKBE-MTART.
    PERFORM CHG_MTH.
    PERFORM CHG_MATNR.
    PERFORM CHG_MTART.
ENDIF.
IF P_MATNR NE I_EKBE-MATNR.
    PERFORM CHG_MTH.
    PERFORM CHG_MATNR.
ENDIF.
IF P_EBELN NE I_EKBE-EBELN.
    PERFORM CHG_MTH.
    PERFORM CHG_MATNR.
ENDIF.
IF PMTH NE CMTH.
    PERFORM CHG_MTH.
ENDIF.
IF I_EKBE-SHKZG = 'H'.
    I_EKBE-MENGE = I_EKBE-MENGE * -1.
    I_EKBE-DMBTR = I_EKBE-DMBTR * -1.
ENDIF.
IF I_EKBE-DMBTR NE 0.
    W_MENGE = W_MENGE + I_EKBE-MENGE.
    W_DMBTR = W_DMBTR + I_EKBE-DMBTR.
ENDIF.
ENDLOOP.
PERFORM CHG_MTH.
PERFORM CHG_MATNR.
PERFORM CHG_MTART.
PERFORM CHG_WERKS.
TOP-OF-PAGE.
WRITE:/ SY-DATUM,SY-UZEIT,
          77 'A M T E K   E N G I N E E R I N G   L T D',
          180 'Page', (4) SY-PAGNO.
WRITE: / SY-REPID,
          77 '     Purchase Price Trending Report      ',
          180 SY-UNAME.
write: /78 'From Date', S_BUDAT-LOW, 'To Date', S_BUDAT-HIGH.
SKIP.
WRITE: / 'SBU :', I_EKBE-WERKS,
           '     Material Type :', I_EKBE-MTART.
SKIP.
READ TABLE YMTH WITH KEY YYMM = '999901'.
IF SY-SUBRC EQ 0.
    WRITE AT YMTH-COL ' APP Change'.
ENDIF.
WRITE: /01 'Part No',
          19 'PO No',
          31 'Curr'.
LOOP AT YMTH.
    YMTH-COL = YMTH-COL + 3.
    IF YMTH-YYMM NE '999901'.
      WRITE AT YMTH-COL YMTH-YYMM(4).
      WRITE YMTH-MTH.
    ELSE.
      WRITE AT YMTH-COL '       %'.
    ENDIF.
ENDLOOP.
ULINE.
*&      Form get_ymth
      text
--> p1        text
<-- p2        text
FORM GET_YMTH.
CMTH = S_BUDAT-HIGH(6).
PMTH = S_BUDAT-LOW(6).
IF S_BUDAT-HIGH IS INITIAL.
    CMTH = PMTH.
ELSEIF S_BUDAT-LOW IS INITIAL.
    PMTH = CMTH.
ENDIF.
LMTH1 = CMTH.
CDATE-YYMM = CMTH.
SDATE = CDATE.
SDATE = SDATE - 1.
LMTH2 = SDATE(6).
WHILE PMTH <= CMTH.
    MTH = CMTH+4(2).
    CDATE-YYMM = CMTH.
    YMTH-YYMM = CMTH.
    PERFORM GET_MTH.
    APPEND YMTH.
    SDATE = CDATE.
    SDATE = SDATE - 1.
    CMTH = sdate(6).
ENDWHILE.
YMTH-YYMM = '999901'.
YMTH-MTH = ' % '.
APPEND YMTH.
SORT YMTH BY YYMM.
W_COL = 21.
LOOP AT YMTH.
    W_COL = W_COL + 15.
    YMTH-COL = W_COL.
    MODIFY YMTH.
ENDLOOP.
APPEND LINES OF YMTH TO S_YMTH.
APPEND LINES OF YMTH TO W_YMTH.
APPEND LINES OF YMTH TO G_YMTH.
REFRESH YMTH.
APPEND LINES OF S_YMTH TO YMTH.
ENDFORM.                                                    " get_ymth
*&      Form get_mth
      text
--> p1        text
<-- p2        text
FORM GET_MTH.
CASE MTH.
    WHEN '01'.
      YMTH-MTH = 'Jan'.
    WHEN '02'.
      YMTH-MTH = 'Feb'.
    WHEN '03'.
      YMTH-MTH = 'Mar'.
    WHEN '04'.
      YMTH-MTH = 'Apr'.
    WHEN '05'.
      YMTH-MTH = 'May'.
    WHEN '06'.
      YMTH-MTH = 'Jun'.
    WHEN '07'.
      YMTH-MTH = 'Jul'.
    WHEN '08'.
      YMTH-MTH = 'Aug'.
    WHEN '09'.
      YMTH-MTH = 'Sep'.
    WHEN '10'.
      YMTH-MTH = 'Oct'.
    WHEN '11'.
      YMTH-MTH = 'Nov'.
    WHEN '12'.
      YMTH-MTH = 'Dec'.
ENDCASE.
ENDFORM.                                                    " get_mth
*&      Form chg_matnr
      text
--> p1        text
<-- p2        text
FORM CHG_MATNR.
CLEAR W_TOTAL.
LOOP AT YMTH.
    W_TOTAL = W_TOTAL + YMTH-DMBTR.
ENDLOOP.
IF W_TOTAL = 0.
    EXIT.
ENDIF.
CLEAR: W_DMBTR, W_MENGE, W_DMBTR1, W_MENGE1, APP, APP1, APP2.
READ TABLE YMTH WITH KEY YYMM = LMTH2.
IF SY-SUBRC EQ 0 AND
     YMTH-MENGE NE 0.
    W_DMBTR = YMTH-DMBTR.
    W_MENGE = YMTH-MENGE.
    READ TABLE YMTH WITH KEY YYMM = LMTH1.
    IF SY-SUBRC EQ 0.
      APP = W_DMBTR / W_MENGE.
      APP1 = YMTH-DMBTR / YMTH-MENGE.
      APP2 = ( APP1 - APP ) / APP * 100.
    ENDIF.
ENDIF.
IF X_APP_L IS INITIAL AND
     X_APP_H IS INITIAL.
ELSE.
    IF APP2 < X_APP_L OR
       APP2 > X_APP_H.
      EXIT.
      CLEAR: W_DMBTR, W_MENGE, APP.
      P_MATNR = I_EKBE-MATNR.
      P_EBELN = I_EKBE-EBELN.
      PERFORM CLR_YMTH.
    ENDIF.
ENDIF.
SKIP.
WRITE:/ P_MATNR, ' Amount ',
         'USD'.
LOOP AT YMTH.
   WRITE AT YMTH-COL(12) YMTH-DMBTR NO-ZERO.
ENDLOOP.
WRITE:/(18) ' ', ' Quantity',
        P_MEINS.
LOOP AT YMTH.
   WRITE AT YMTH-COL(12) YMTH-MENGE NO-ZERO.
ENDLOOP.
WRITE:/ P_MATNR(18), P_EBELN, 'USD' UNDER 'Curr'.
LOOP AT YMTH.
    IF YMTH-YYMM NE '999901'.
      CLEAR APP.
      IF Ymth-menge ne 0.
        APP = YMTH-DMBTR / YMTH-MENGE.
      ENDIF.
      WRITE AT YMTH-COL(12) APP.
      READ TABLE S_YMTH WITH KEY YYMM = YMTH-YYMM.
      IF SY-SUBRC EQ 0.
        S_YMTH-MENGE = S_YMTH-MENGE + YMTH-MENGE.
        S_YMTH-DMBTR = S_YMTH-DMBTR + YMTH-DMBTR.
        MODIFY S_YMTH INDEX SY-TABIX.
      ENDIF.
      READ TABLE W_YMTH WITH KEY YYMM = YMTH-YYMM.
      IF SY-SUBRC EQ 0.
        W_YMTH-MENGE = W_YMTH-MENGE + YMTH-MENGE.
        W_YMTH-DMBTR = W_YMTH-DMBTR + YMTH-DMBTR.
        MODIFY W_YMTH INDEX SY-TABIX.
      ENDIF.
    ELSE.
      WRITE AT YMTH-COL(12) APP2.
    ENDIF.
ENDLOOP.
CLEAR: W_DMBTR, W_MENGE, APP.
P_MATNR = I_EKBE-MATNR.
P_EBELN = I_EKBE-EBELN.
PERFORM CLR_YMTH.
ENDFORM.                                                    " chg_matnr
*&      Form chg_mtart
      text
--> p1        text
<-- p2        text
FORM CHG_MTART.
SKIP.
ULINE.
CONCATENATE P_MTART 'Total' INTO WTEXT SEPARATED BY SPACE.
PERFORM PRN_TOT TABLES S_YMTH.
P_MTART = I_EKBE-MTART.
LOOP AT S_YMTH.
    CLEAR: S_YMTH-DMBTR, S_YMTH-MENGE.
    MODIFY S_YMTH.
ENDLOOP.
ENDFORM.                                                    " chg_mtart
*&      Form chg_werks
      text
--> p1        text
<-- p2        text
FORM CHG_WERKS.
CONCATENATE P_WERKS 'Total' INTO WTEXT SEPARATED BY SPACE.
PERFORM PRN_TOT TABLES W_YMTH.
CLEAR: W_DMBTR, W_MENGE, APP.
P_WERKS = I_EKBE-WERKS.
LOOP AT W_YMTH.
    CLEAR: W_YMTH-DMBTR, W_YMTH-MENGE.
    MODIFY W_YMTH.
ENDLOOP.
NEW-PAGE.
ENDFORM.                                                    " chg_werks
*&      Form chg_mth
      text
--> p1        text
<-- p2        text
FORM CHG_MTH.
READ TABLE YMTH WITH KEY YYMM = PMTH.
IF SY-SUBRC EQ 0.
    YMTH-MENGE = W_MENGE.
    YMTH-DMBTR = W_DMBTR.
    MODIFY YMTH INDEX SY-TABIX.
ENDIF.
CLEAR: W_MENGE, W_DMBTR.
PMTH = CMTH.
ENDFORM.                                                    " chg_mth
*&      Form clr_ymth
      text
--> p1        text
<-- p2        text
FORM CLR_YMTH.
LOOP AT YMTH.
    CLEAR: YMTH-DMBTR, YMTH-MENGE.
    MODIFY YMTH.
ENDLOOP.
ENDFORM.                                                    " clr_ymth
*&      Form prn_tot
      text
--> p1        text
<-- p2        text
FORM PRN_TOT TABLES I_YMTH STRUCTURE YMTH.
CLEAR: W_DMBTR, W_MENGE, W_DMBTR1, W_MENGE1, APP, APP1, APP2.
READ TABLE I_YMTH WITH KEY YYMM = LMTH2.
IF SY-SUBRC EQ 0 AND
     I_YMTH-MENGE NE 0.
    W_DMBTR = I_YMTH-DMBTR.
    W_MENGE = I_YMTH-MENGE.
    READ TABLE I_YMTH WITH KEY YYMM = LMTH1.
    IF SY-SUBRC EQ 0.
      APP = W_DMBTR / W_MENGE.
      APP1 = I_YMTH-DMBTR / I_YMTH-MENGE.
      APP2 = ( APP1 - APP ) / APP * 100.
    ENDIF.
ENDIF.
WRITE:/ WTEXT, ' Amount ',
         'USD'.
LOOP AT I_YMTH.
    SELECT SINGLE * FROM TCURR
      WHERE FCURR = 'SGD'
      AND   TCURR = 'USD'.
      I_YMTH-DMBTR = I_YMTH-DMBTR * TCURR-UKURS.
   WRITE AT I_YMTH-COL(12) I_YMTH-DMBTR NO-ZERO.
ENDLOOP.
WRITE:/(18) ' ', ' Quantity'.
LOOP AT I_YMTH.
   WRITE AT I_YMTH-COL(12) I_YMTH-MENGE NO-ZERO.
ENDLOOP.
WRITE:/(18) ' ', ' APP     ', 'USD'.
LOOP AT I_YMTH.
    IF I_YMTH-YYMM NE '999901'.
      CLEAR APP.
      IF I_YMTH-MENGE NE 0.
        APP = I_YMTH-DMBTR / I_YMTH-MENGE.
      ENDIF.
      WRITE AT I_YMTH-COL(12) APP.
    ELSE.
      WRITE AT I_YMTH-COL(12) APP2.
    ENDIF.
ENDLOOP.
ULINE.
CLEAR: W_DMBTR, W_MENGE, APP.
ENDFORM.                    " prn_tot

How to use ZMATERIAL info object attribute in existing report

Hi all,
         Using generic extraction we have created data source related that data source we have created navigational attribute for
info object ZMATERIAL. Data available for ZMATERIAL info objects. Now ZMATERIAL info object related navigational attribute
want to use in existing report.
For eg. Already sales report developed in that 0MATERIAL only using now i required to use ZMATERIAL also in that report
My requirment is ZMATERIAL related navigational attribute want to use in exisiting report, how to do that? kindly guide me.
Thanks

Goto CMOD
Enter the projname
select component
click on display
--seelct the Fm EXIT_SAPLRSAP_002
-- double click on include program to insert your code double click on ZXRSAU02
Enter your code below
CASE i_datasource.
Sample code ...
WHEN '0MATERIAL_ATTR'.
    LOOP AT i_t_data INTO lt_mara.
      l_tabix = sy-tabix.
      SELECT SINGLE ZCOMP ZSUPP ZPUBL ZIMPR ZFORM ZSUBJ ZSDET ZAUTH ZREDT ZPUDT ZADAT
              INTO (lt_mara-zcomp, lt_mara-zsupp, lt_mara-zpubl,
                    lt_mara-zimpr, lt_mara-zsubj, lt_mara-zsdet,
                    lt_mara-zauth, lt_mara-zpudt, lt_mara-zADAT)
             FROM mara
             WHERE matnr = lt_mara-matnr.
Endloop.
Regards
KP

Adding new column in an existing report which was build using Union

While working in OBIEE 11g I encounter an issue.
My existing report was build using UNION at Criteria Tab in Analysis. Now I have a requirement to add a new column into the same report. For each criteria I have added the new column but when I go back to the "Result Columns". I see a new field added but it is not allowing me to open or edit column properties for that new column & at the same time it is not allowing me to navigate to other tabs like Results, Promts, and Advanced.
I don’t want to build this report from scratch. Is there any workaround to get it resolved?

Hi,
Just check it once the new added column data types are mismatched or not?
and the new added column should be navigated into excluded section, so u should edit the report and dragged into the table column section.
Thanks..

Open a subreport from an existing report without hitting the database

Hello Experts,
I want to open a webi subreport with the data from an exisiting webi report directly not from database.currently i am using hyperlink on some measure values and in theses hyperlink, i am using opendocument query and passing the values in the filters created at subreport side,but every time i clicked on hyperlink its opening the subreport but taking data from data base instead of existing report.
i also tried in this way by passing a context from parent report :
I am having country column in my report which is having many countries, i want that when i click on england it should open the subreport with the data only for england from parent report not from database.
="<a href=\"http://server:port/OpenDocument/opendoc/openDocument.jsp?sType=wid&sDocName="URLEncode("aaa")"&sReportName="URLEncode("aaa")"&sReportPart=table name at subreprt""&sPartContext=/country[england]""&sWindow=New""&sRefresh=N""\" title=\"click\" target=\"_new\" nav=\"web\">"[country]"</a>"
Thanks in Advance:)

Hi, Harry.
Have you tried editing your subreport query properties? uncheck Refreshable and Editable checkboxes.

Can i open a existing report using a report generation toolkit

Hello All,
Suppose I create a new excel report today and close the program, Tomorrow I open the same program and instead of creating a new excel file, i need to update the test results data into the excel file which was created yesterday, is this possible.
I am confused because there is no option called Open report in report generation toolkit, it just has create new report option.
Probably NI Guys can work on this...sorry if it is a;lready existing?
Is there any method to open a existing report?
Pls help.....
Thanks
Solved!
Go to Solution.

Hi,
I have a similar problem. I'd like to use Report Generation Toolkit to enter data into some cells in the active worksheet of the active workbook but it seems impossible?! The user has in beforehand opened the desireed workbook and activated the desired worksheet. I use the 'New Report' VI with the template input set as the path of the active workbook (some self-made ActiveX calls to get the path). When this VI is run, howevere, the excel file is sort of re-opened and another worksheet becomes the active one.
I tried to make a customized copy of New Report.vi, New Report subVI.vi and Excel_Open_Workbook.vi so that the Report object works with the currently active workbook and worksheet, but I failed due to my lack of knowledge in LV classes and such things. It would've been an ugly solution anyway to have custom low-level VIs that does not follow when the RepGen Toolkit develops in the future.
Best regards,
Andreas Nilsson

Crystal Report 2008 error in generating existing reports

HI,
I have just now migrated my server from Win 2003, 32 bit to Win 2003, 64 bit. I was holding a valid license in the old server. Using the Product key and the registration number, I installed Crystal Report 2008 SP3 Build in the new server since Crystal report is supported in 64 bit version too. Now, while generating the existing reports from my application, I am getting error in event viewer as-
"The description for Event ID ( 4353 ) in Source ( Crystal Reports ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: The keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll, cannot be loaded."
Can someone please suggest me how to resolve this error? Actually, while opening the crystal report from application, a pop-up comes as - "Internet Explorer Script error......._pe is undefined......Do you want to continue with this? " If I say Yes/No, it opens up the required page but drop down does not contain any info and 'OK' or 'CANCEL' button does not appear....
I need to solution ASAP. Please help.
Thanks
kmoondra

Crystal report is supported in 64 bit version too
Support on 64 bit OS does not necessarily mean that the product is 64 bit. E.g.; CR 2008 (12.x) is still only 32 bit. Only CRVS2010, CR 10.2 and CR 10.5 come in both 32 bit and 64 bit flavors.
If you are using 32 bit Crystal Report, make sure your app is compiled as 32 bit, not "Any CPU". If you compile as "Any CPU" the 64 bit oS will want 64 bit runtime for the app by definition. This will fail as there is no 64 bit runtime for CR 2008. E.g.; follow the advice in Don's post.
- Ludek

Smartforms: Appending Spool o/p(report) to PDF generated by SSF

Dear Murugesh
I have attached the code for Appending Spool o/p(report) to PDF generated by SSF below
Please suggest as i will have 2 finish by this SAT.
(Hint : Under 1 SOrdr there may be several line items==>
The material with ref 2 every line-item either may be configurable(ZPL3) or nonconfigurable(ZA3C)) .
*ENCLOSER TO PACKING LIST
SELECT VBELN POSNR INTO CORRESPONDING FIELDS OF TABLE T_VBAP
                    FROM VBAP
                    WHERE VBELN = SSORD.
*For capturing the o/p pages from ZPL3 and consolidating into table
*T_OTF to get single PDF
LOOP AT T_VBAP INTO T_VBAP.
    ITNO = T_VBAP-POSNR.
SELECT SINGLE * FROM ZPP_PLCMH WHERE VBELN = SSORD
                                 AND   POSNR = ITNO.
   IF SY-SUBRC EQ 0.
     SET PARAMETER ID: 'AUN' FIELD SSORD ,
                        'APO' FIELD ITNO.
     CALL TRANSACTION 'ZPCE' AND SKIP FIRST SCREEN.
     IMPORT A = T_OTF2 FROM MEMORY ID 'MEMID'.
     LOOP AT T_OTF2 INTO T_OTF2.
       APPEND T_OTF2 TO T_OTF.
     ENDLOOP.
     REFRESH T_OTF2.
   ELSE.
*For capturing the o/p pages from ZA3C and Appending
*at the end of the PDF file just created by the above code
    SELECT SINGLE * FROM ZPLH WHERE VBELN = SSORD
                              AND   POSNR = ITNO.
     IF SY-SUBRC EQ 0.
       SET PARAMETER ID: 'AUN' FIELD SSORD,
                        : 'APO' FIELD ITNO.
       CALL TRANSACTION 'ZPNE' AND SKIP FIRST SCREEN.
       IMPORT B = SPOOL_ID FROM MEMORY ID 'MEMID2'.
       CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
         EXPORTING
           SRC_SPOOLID                    = SPOOL_ID
           NO_DIALOG                      = ''
           DST_DEVICE                     = E_DEVTYPE
          PDF_DESTINATION                = 'LOHP'
        IMPORTING
           PDF_BYTECOUNT                  = BTC
         PDF_SPOOLID                    =
         LIST_PAGECOUNT                 =
         BTC_JOBNAME                    =
         BTC_JOBCOUNT                   =
        TABLES
           PDF                            = T_SPOOL_2_PDF
       EXCEPTIONS
         ERR_NO_ABAP_SPOOLJOB           = 1
         ERR_NO_SPOOLJOB                = 2
         ERR_NO_PERMISSION              = 3
         ERR_CONV_NOT_POSSIBLE          = 4
         ERR_BAD_DESTDEVICE             = 5
         USER_CANCELLED                 = 6
         ERR_SPOOLERROR                 = 7
         ERR_TEMSEERROR                 = 8
         ERR_BTCJOB_OPEN_FAILED         = 9
         ERR_BTCJOB_SUBMIT_FAILED       = 10
         ERR_BTCJOB_CLOSE_FAILED        = 11
         OTHERS                         = 12
       IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
       ENDIF.
ELSE.
       TEXT02 = ITNO.
       MESSAGE I014(ZQOTBANK) WITH TEXT02.
   ENDIF.
ENDIF.
ENDLOOP.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
EXPORTING
    USE_OTF_MC_CMD               = 'X'
ARCHIVE_INDEX                =
IMPORTING
    BIN_FILESIZE                 = BIN_FILESIZE
TABLES
    OTF                          = T_OTF
    DOCTAB_ARCHIVE               = T_DOC
    LINES                        = T_LINES
EXCEPTIONS
   ERR_CONV_NOT_POSSIBLE        = 1
   ERR_OTF_MC_NOENDMARKER       = 2
   OTHERS                       = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    BIN_FILESIZE                    = BIN_FILESIZE
    FILENAME                        = 'C:\SD6.pdf'
    FILETYPE                        = 'BIN'
    APPEND                          = 'X'
WRITE_FIELD_SEPARATOR           = ' '
HEADER                          = '00'
TRUNC_TRAILING_BLANKS           = ' '
WRITE_LF                        = 'X'
COL_SELECT                      = ' '
COL_SELECT_MASK                 = ' '
DAT_MODE                        = ' '
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = ' '
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
IMPORTING
    FILELENGTH                      = BIN_FILESIZE
TABLES
    DATA_TAB                        = T_LINES
FIELDNAMES                      =
EXCEPTIONS
FILE_WRITE_ERROR                = 1
NO_BATCH                        = 2
GUI_REFUSE_FILETRANSFER         = 3
INVALID_TYPE                    = 4
NO_AUTHORITY                    = 5
UNKNOWN_ERROR                   = 6
HEADER_NOT_ALLOWED              = 7
SEPARATOR_NOT_ALLOWED           = 8
FILESIZE_NOT_ALLOWED            = 9
HEADER_TOO_LONG                 = 10
DP_ERROR_CREATE                 = 11
DP_ERROR_SEND                   = 12
DP_ERROR_WRITE                  = 13
UNKNOWN_DP_ERROR                = 14
ACCESS_DENIED                   = 15
DP_OUT_OF_MEMORY                = 16
DISK_FULL                       = 17
DP_TIMEOUT                      = 18
FILE_NOT_FOUND                  = 19
DATAPROVIDER_EXCEPTION          = 20
CONTROL_FLUSH_ERROR             = 21
OTHERS                          = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanx
Moni
Message was edited by: md monirujjaman

Hello,
Can you explain the problem in detail plz.
I do see that the logic which was proposed is implemented in code.
please check at various places, in run time the following points:
1. Spool ID exported into ABAP Memory.
2. Contents of the Main OTF IntTab.
3. Conversion of the Spool to PFD.Check whether SUBRC = 0. <b>Un-comment all the Exceptions in your FMs where-ever you make a call in your program.</b>
   If this conversion of Spool to PDF is successful, you can choose "Append" option from the popup.
Hope this helps you. Or if you have any specific query let me know.
Regards, Murugesh AS

How can I replace an existing report?

The way our Enterprise server is setup, we have a folder that we publish all reports to. This folder is proteced from view from anyone but admins.
In order for our users to "see" a report we create a shortcut of the report in their User folder.
This works well, with one exception. When we need to put a new revision of a report out there, we have to recreate all of the existing user shortcuts. There is no way to "replace" an existing report (and inherit its underlying "ID" in the sql database) and have all of the shortcuts use the new report. This is especially painfull when the reports are scheduled to run. All the the scheduling/parameters/etc ahas to be recreated after the new report is publised to the server.
I assuem there is some way to accomplish this with the SDK. I was wondering if someone can point me in the right direction. I am rather new to DOT Net development (about a year), but I have been writing "C" and "C++" code for 20 years, hopefully I can figure this out..
Thanks in advance for any input!
Shayne

Don't have a C# version, but here's a VB.NET version:
Private Sub Page_Load(ByVal sender as System.Object, ByVal e As System.EventArgs)
    Dim boUsername As String = "Administrator"
    Dim boPassword As String = ""
    Dim boCmsName As String = "TUEDA-BEXIR2S2"
    Dim boAuthType As String = "secEnterprise"
    Dim rptPath As String = "C:\ASP_NET\update_doc\302810928JDBC.rpt"
    Dim query As String = "Select Top 1 * From CI_INFOOBJECTS " _
                          & " Where SI_KIND='CrystalReport' " _
                          & " And SI_INSTANCE = 0 " _
                          & " And SI_NAME='302810928ODBC'"
    Dim boSession As EnterpriseSession
    Dim infoStore As InfoStore
    Dim reports   As InfoObjects
    Dim report    As Report
    Try
        boSession = (New SessionMgr()).Logon(boUsername, boPassword, boCmsName, boAuthType)
        infoStore = New InfoStore(boSession.GetService("", "InfoStore"))
        reports = infoStore.Query(query)
        report = reports.Item(1)
        report.Files.Item(1).Overwrite(rptPath)
        report.RefreshProperties()
        infoStore.Commit(reports)
    Finally
        If Not IsNothing(boSession) Then
            boSession.Logoff()
        End If
    End Try
End Sub
Sincerely,
Ted Ueda

How to Read Data from a table (horizontal axsis) in an existing report

Hi to all,
I've a question. I must read the data in a table of an existing report. I develope with BO XI 3.0
I don't know how to reach the table in my report from SDK.
this is my code:
reports = document.getReports();
rep = reports.getItem(0);
the report has the title and a table horizontal axsis.
I must read the column name(header column) of the table and all rows for retrieving values.
Thank u in advance for your attention.

hi ChinMay,
thank u for your answer.
I would like to ask u if Ireport refers crystal reports, while i mean to read data from a webi report.
I've tried in many manners to read this data and i've read the SDK, but i'm unable to reach the table of my report for reading its rows. i'm able to export in XML format, i'm able to get reportelement , block, but in the java's example of SDK its not present how to obtain the reportbody and subsequently the section or directly a table. the example that i've seen show that if u create a new report u can create the reportbody, the section, the table and others. But don't show how to obtain this from an existing report.
Probably i don't understand very well all the SDK structure and i think that is possbile to read a table(with horizantal axis) in a report without section only passing by the ReportBody.
I know that u don't have so time to spent for things that are in the SDK, but if it's possible to have ten rows of sample about this question i'll be very happy.
If it's not possibile, thank u very much for your interesting and disponbility and i'll try again and again and again to solve this.
Matteo

Adding a new parameter to the existing report in GL(GLRTR1.rdf)

Hi Friends,
I was new to this oracle Forums and i am working as a oracle apps technical consultant, i have been assigned a task in GL module to customise the existing report in GL the report name is "GLRTR1.rdf" (available in vision-demo) and its concurrent program name is "Trial Balance Summary-1" this program has the predefined parameters like:
(Parameter Name : Values to be entered/as u wish)
Pagebreak Segment : Company
Pagebreak Segment Low :01
Pagebreak Segment High:01
Currency :USD
Period Name :feb-2003
Amount Type :PTD(Period to Date)
user-parameters to be added to above parameterlist
costcenterfrom :segment2 value of (GL_CODE_COMBINATIONS table)
costcenterto : -- do---
Now what i want is i want to add a user parameter to this concurrent program like costcenterfrom and costcenterto these are optional parameters and the its value set type is TABLE and i want to display value is SEGMENT2.
when i select the parameters along with predefined and costcenterfrom and costcenter to the report output should be between the costcenter from and costcenterto along with predefined values,
and if i am not giving any value to the costcenterfrom and costcenterto parameters then the report out put should be based on the above parameters ie predefined parameters only.
i think u haveunderstoood the requirement and does any one please tell me know the solution for my problem its very urgent.
i will be very greatful to them.
Regards,
Azeez
[email protected]

Hi,
Please check whether the auth object is switched on for the info-provider or not. By default its switched on if the info-object is part of the info-provider.
To switch it on again, enter the info-provider name in the section 'Checks For Info-provider'. Click on pencil button to enter into change mode and select your auth object.
Hope it helps
Thanks
Soumya

How do I copy a list from one site to another that has a column that appends changes to existing text?

I want to move a list from one SharePoint site to another, within the same collection. I have created a template and included the content but the column that is selected to append changes to existing text, has not copied in all cases, although it has for
some items.
I have a limited knowledge so won't be able to implement any solutions that require the use of code.

Hi,
According to your post, my understanding is that you wanted to copy a list from one site to another that has a column that appends changes to existing text.
I recommend to use the custom workflow activity Copy List Item Extended Activityto
copy list items and files cross site.
You can do this with codeless SharePoint Designer workflows as long as you can install the
Codeplex Custom SharePoint Designer Workflow Activities.
These activities are also built-in to SPD2010.
To install the custom activities, please follow the steps as below:
Download the solution file form
Useful Sharepoint Designer Custom Workflow Activities
Copy the wps file to the Disk C.
Open the SharePoint 2010 Management Shell.
Run the command: add spsolution c:\ dp.sharepoint.workflow.wsp
Open the Center Administration, click System Setting->Manage Farm Solution-> dp.sharepoint.workflow.wsp->Deploy to one or more Web Application.
Open the SharePoint designer, add action from Custom Actions.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Can Acrobat Standard append to an existing file when saving? Can Pro?

Hello all,
I'm wondering if Adobe Acrobat Standard has the function to save to an existing file. I don't mean append two PDF's together after they are already created. I mean I already have a PDF document which I need to add lots of additional pages to. So when creating additional PDF's, I want to be able to tell Acrobat to add those files to the end of the document I already have.
PrimoPDF has this feature which would be a real time-saver in my line of business. In that program, you simply choose the same filename when asked to save the document. It then prompts you to overwrite or append-to the existing file. For business reasons, it would be very advantageous to use Acrobat rather than Primo. Does anyone know if Acrobat Standard can do this? If not, does Pro do it? Thanks for your time. I appreciate any feedback I get.
Chris

Never tried that... you might read in the Acrobat Pro User Guide Online
http://www.adobe.com/support/documentation/en/acrobatpro/

Cluster not saved correctly in Append Control Image to Report VI

[LV8 with Windows XP]
I'm using the Append Control Image to Report VI to save the image of a control to Word (the same problem occurs if I save to Excel). This VI seems to work fine with all my controls except clusters. Not all of the contents of the cluster show up in the saved image. I have to expand the edges of the cluster way beyond the cluster contents in order for all the contents to show up in the saved image. Is this a bug? Is there a way to "realign" the contents of the cluster within the boundaries?
George

Hi,
just had a customer with the problem with this cluster picture function and I wrote a little VI that manually gets the picture, resizes it to the cluster and the rest is up to you. The only thing is, that you have to place the "zero point" of the frontpanel in the upper left corner to get the proper image.
For Users who want to upgrade: This issue is fixed with the next LabVIEW release.
Best Regards,
Andreas Pistek
~~~ Logic is a systematic method of coming to the wrong conclusion with confidence ~~~
Attachments:
better picture.vi ‏19 KB

Change Selection criteria for existing report in Report painter

Hi Experts,
We are on 4.7, using report painter for getting reports for Cost center & Profit Center. For one of the report we have selection criteria as Cost center and cost center group, but now user want us to add new selection field as Cost element and cost element Group to same report. We have tried all the options from GR32 ->Edit-> General Selection, but we don't find cost element in Key figure listed there.
Please let us know how can we add the new field to selection criteria. We also would like to know is this is possible with existing report to add new fields or not? Is that we need to create new report for this?
Thanks in advance..
Shilpa

Shilpa-
In my opinion the best way to troubleshoot issues like this is to go to SAP delivered standard reports and see how they are setup. For example, in your case you want to add cost element and cost element group to your report. There is one standard report from SAP - Transaction :S_ALR_87013611 which has both cost center, cost center group and cost element, cost element group in the selection criteria. You can look how this report is set up, and maintain your report in a similar fashion. Atleast this way, it will give you an idea.
Go to transaction code GRR3 and under library look for report "1SIP-001". By double clicking on the row, you will see how it is maintained.
Hope this helps.
Shail

Append to an existing report

Similar Messages

Maybe you are looking for