AppFabric 1.1 with Windows 7 losing or abandone sessions and ignore the timeout settings

Hi,
We have a enterprise financial web solution using aspx and AppFabric 1.1 and we have an issue with Sessions as the get abandoned or appFabric is ignoring the timeout settings.
I tried almost everything: use sql and xml configuration, deactivate firewalls, ensure all sessions are set to 20 minutes expirations. We have the appFabric settings on the web.config and our project is multilayer but sessions are mainly
created/consumed at the web project level..
We use AppFabric 1.1 with Sql Server 2008R2 over a Windows7 x64 environment.
I also tried all the options using powerShell command: get-command -module DistributedCacheAdministration, I increased the TTL to 38 mins but still nothing makes any difference. Sessions are lost between ~~ 5 to 10 minutes no matter if
you are playing with the solution or you left aside..
Please help. I really appreciate any suggestion, idea, recommendation..
Hernan Bogantes
Florida.

Note the provider type in AF 1.1 is 
type="Microsoft.Web.DistributedCache.DistributedCacheSessionStateStoreProvider,Microsoft.Web.DistributedCache"
which is different from the type in 1.0:
type="Microsoft.ApplicationServer.Caching.DataCacheSessionStoreProvider"
https://msdn.microsoft.com/en-us/library/hh361709(v=azure.10).aspx

Similar Messages

  • Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

    Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

    HP Smart Web Printing has been replaced with HP Smart Printing.  It does support Windows 7 and IE 6 to IE9.  See this page for information.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HT6114 My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed.  I need this so how can I go back to the old system?

    My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed.  I need this so how can I go back to the old system?

    Restore from the backup you had prior to installing Mavericks.
    However, the upgrade should not have altered your partition scheme. Did your erase and format the drive prior to upgrading?

  • I have a HP-6210 Laptop with Windows 8.1 ... and Videos are not playing from youtube espn etc

    I have a HP-AMD A4-6210 Laptop with Windows 8.1 ... and Videos are not playing from youtube espn etc
    This question was solved.
    View Solution.

    Hi,
    Try a clean installation of the flash plugin/activeX as follows.
    First, download the Flash uninstall utility on the link below and save it to your Downloads folder.
    Flash Player Uninstaller.
    When the download has completed, close all browser windows, open your Download folder and run the uninstaller.  After this has completed, restart the notebook.
    When windows has reloaded, download and install the latest version of Adobe Flash.  Note: You may want to deselect the option to include McAfee Security Scan Plus before downloading.
    When the installation has completed, restart the notebook.
    If the above doesn't correct the issue, then try the following.
    First of all, download and run the Shockwave uninstaller on the link below.
    http://fpdownload.macromedia.com/get/shockwave/uninstall/win/sw_uninstaller.exe
    After this has completed, restart the notebook.
    When windows has fully reloaded, download and install the latest version of Shockwave on the following link.
    http://get.adobe.com/shockwave/
    Again, after this installation, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I have purchased Adobe Acrobat and my order number is 281998924. My previous Sony computer which used to Windows 7 crashed. I purchased a new Toshiba computer with Windows 8. How can I download the Adobe acrobat? I assume I don't have to pay for the progr

    I have purchased Adobe Acrobat and my order number is 281998924. My previous Sony computer which used to Windows 7 crashed. I purchased a new Toshiba computer with Windows 8. How can I download the Adobe acrobat? I assume I don't have to pay for the program again? Thank you for all your help! Angelo.

    If you had purchased Acrobat Standard subscription.
    You need to download the application from below website :
    www.cloud.acrobat.com
    Sign in with Adobe ID and Password and once signed in click on Acrobat tab and download the application.
    Sign in - Adobe ID

  • AIM with Windows Live Messenger buddies as some of the contacts

    Can have an AIM account with Windows Live Messenger buddies as some of the contacts?
    Thanks,
    Brandon

    If you are using iChat it will not chat with MSN (or similar) buddies without some work
    You need to read the items in the left hand panel here Particularly the All Forces link.
    8:26 PM Monday; December 22, 2008
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • I am using Adobe Reader X on a laptop with Windows Vista OS and Adobe Reader XI on an older laptop with Windows XP OS.  While filling out the same form on each computer, I have found that I can save info on the older laptop, but not on the newer one.  Thi

    I am using Adobe Reader X on a laptop with Windows Vista OS and Adobe Reader XI on an older laptop with Windows XP OS.  While filling out the same form on each computer, I have found that I can save info on the older laptop, but not on the newer one.  This is a big problem.  I must be able to save on the newer computer.  Do I need to buy a new computer with a more up-to-date OS?  Please help.

    Adobe Reader X can only save reader-enabled forms. Adobe Reader XI can save all forms.

  • URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.

    Hello SAP community,
    I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
    When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
    But when I click than on NWA (example), I am getting "http 500 server error".
    I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
    But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
    Than it is working without problems with Windows 7 and Internet Explorer.
    I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
    We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
    Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
    Thanks for your help.
    Best regards
    Carlos

    Hi all,
    I think I found the solution.
    The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
    That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
    When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
    Internet Explorer Options => Settings for compatibility view => Add domain
    Best regards
    Carlos

  • I can't play movie downloads.  I've tried opening them with Windows Media Player, i-tunes, and Quick time but they don't work.

    I can't play i-tunes downloaded movies.  I've tried opening them with Windows Media Player, i-tunes, and quick time.  Nothing works.

    If after you download the movie, you navigate away and do something else with your Apple TV the content you have downloaded will be overwritten and you'll need to download it again. It's a pain in the neck for many who have slow downloads but it's something that comes with using volatile memory rather than a hard drive for storage.
    Perhaps you're not doing this, but I thought it worth mentioning.

  • I have hp touchsmart 310pc with window 7 operating system, recently I download the window 8 system,

    I have HP touchsmart 310pc with window 7 operating system, recently i download the window 8 system, but all of my other software came with window 7 gone, like microsoft word, excel, spreedsheet, and games. How can I get them back?

    Hi,
    Probably you've done a clean install. Can you see C:\Windows.old folder ? If yes you can roll back to Windows 7 then reinstall Windows 8 using option to keep everything. Otherwise can be a very long, long, long task and can't recover everything.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.

    I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.
    4d4aae27-34ee-4620-b349-c03002813b2003-Jan-1312:30 AM
    54e24e0e-dfc4-466b-a347-4bd95536773e03-Jan-1312:30 AM
    22d351d2-6461-4f33-9fbd-6d31f769e73103-Jan-1312:30 AM
    8a8da99b-335e-43bb-aa12-4634aa0b431003-Jan-1312:30 AM
    a15bb095-aeb9-44e1-a79c-1a17cee207d503-Jan-1312:28 AM

    None if these crash reports seem to have been send.
    Do you have crash reports with a "bp-" prefix that were submitted and that show a crashing thread?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can use one of these to start Firefox in <u>Safe mode</u>:
    *On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
    *On Mac, hold down the Options key while starting Firefox
    See also:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes

  • How Do I create Windows Form file in VS and add the form to my VS project?

    C#, How Do I create Windows Form file in VS and add the form file to my VS project by using C# code?
    I like to create a Windows Form file into my VS Win Form project by using C#. I have the path and the file name.
    I need a Win Form with FileName.cs, FileName.Designer.cs, FileName.resx, and FileName (as you see it VS by adding a Win Form manually by using VS)
    Rune Brattas

    You cannot create a Form from code at run time. 
    For one thing, the user running your application will, almost certainly, not have  a copy of Visual Studio to hand with which to build anything.  (Not that you actually need 'Studio at all; Notepad and csc.exe are all you actually
    need), but that's another story).
    You can do this with an awful lot of pain, using the innards of the compiler from iside your own program, compiling the new Form's source code on the fly and then executing the resulting assembly within your application.  IMHO, that's a simply terrifying
    prospect especially as the code you will be compiling will be on someone else's machine and over which you will have absolutely no control.  If you're lucky, they'll spell something wrong and it won't compile.
    The "usual" way to do this sort of thing is to create additional, "plug-in" forms as library assemblies and have your program load and execute these at run-time. 
    Regards, Phill W.

  • After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer.

    After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
    capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.  
    These steps are to be taken while booted in safe mode.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below to select it:
    for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3 
    Repeat with this line:
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 4
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit 
    Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • I try to backup my Macbook with Time machine, it goes fine and at the end it says that it could not be completed because "/Volumes/Data-2/ MacBook.sparsebundle is already in use".. What is that?!

    I try to backup my Macbook with Time machine, it goes fine and at the end it says that it could not be completed because "/Volumes/Data-2/ MacBook.sparsebundle is already in use".. What is that?!

    See #C12 in Time Machine - Troubleshooting

  • I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server wher

    I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server where the PDFs open fine) I get an error 'There was an error processing a page. Invalid function resource' The other one just doesn't open at all. Can anyone help with this please?

    Hello,
    Are the pdf linked correctly in the website? Is this a public website? If yes, please post the link here.
    ~Deepak

Maybe you are looking for