Outlook 2013 not responding when creating a new email item in Windows 8

This issue occurs intermittently. No add-ins are running. No anti-virus programs are running. Outlook does not respond and it must be restarted. This issue also affects reply email items and forwarding email items as well.

Hi,
Which type of email account are you using? POP3, IMAP or Exchange?
If you are using a POP3 email account with an Exchange server account configured in the same profile, this issue may happen because the
delivery folder selection is corrupt and you are referencing a nonexistent folder. To fix it, in Outlook 2013, click on the File tab >
Info > Account Settings > Account Settings > Highlight your POP account, then click Change Folder. Select a proper folder to deliver to. For more information, please refer:
http://www.slipstick.com/problems/outlook-crashes-when-you-reply-or-create-a-new-message/
If above didn't apply, please follow the steps in the KB article below to troubleshoot the issue:
http://support.microsoft.com/kb/2652320/en-us
Hope this helps.
Best Regards,
Steve Fan
TechNet Community Support

Similar Messages

Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11

Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11. I can see the tables and views in the database tab, but no stored procedures. If I connect to a data source created in ColdFusion Server 6 I am able to see the stored procedures.

Ben thanks for the reply!
Yes that is the process I am following:
In Dreamweaver, open the page that will run the stored procedure.
In the Bindings panel (Window > Bindings), click the Plus button, and then select Stored Procedure.
In the Data Source pop‑up menu, select a connection to the database containing the stored procedure
Enter the ColdFusion Data Source user name and password.
At this point in the procedure drop down I would get a message that said No Stored Procedure Found.
Right now it appears to be working, I had to create a new site that pointed to the older CF 6 server's data source and create a page following the process above, then when I went back to the CF 11 site the stored procedures were now populated. I need to make sure it is pulling from the correct server but right now it appears to be working.
Thanks
Dwight

Excel 2013 not responding when doing refresh all for enbedded quires.

System:
Windows 8.1
Intel I7 620 CPU
12 GB ram
Office 2013
Issue 1:
I have a excel file with 29 data from WEB quires. These are quires for stock data and the only difference in them is the ticker symbol. When I request a refresh all Excel goes into a not-responding mode and I have to quit the program to stop it. This same
file ran OK in Excel 2010. I have the data on sheet one and about half the quires on sheet 2 and the remaining quires on sheet 3. Each quire downloads data a small table and cells in sheet one reference cells in sheet two and three. Two cells are accessed
from each table. I had a Microsoft support person on the line today and she had me repair office, which didn't help. I removed Sheet 2 and Sheet 3 and redid all the quires and that didn't help. Each quire can be refreshed individually.
I also have a laptop with Office 2013 and Excel has the same problem with the same file.
Issue 2:
Each row holds information about a given stock and gets current stock price and dividend percent from its quire table. The stock price comes from column A and the dividend percent come from column C two rows below the row the price is in. Every
time a do a refresh the cell that references the data in Column C comes from two rows below the row it should come from. This does not happen for every stock only some of them. The reference to the data from the A column is always correct. This problem was
happening in Excel 2010 too.

Hi,
To your first issue:
Excel 2013 not responding may be caused by some reasons. Let's do some tests to narrow down the issue:
Method 1: Verify/install the latest updates
Method 2: Start Excel in safe mode
Method 3: Investigate possible issues with add-ins
Method 4: Check whether your antivirus software is up to date or is conflicting with Excel
https://support.microsoft.com/kb/2758592/en-gb
If the issue still exists, please upload the event log in the thread, I'll do more deeply
research.
To your second issue, would you like to upload a sample of the Excel file by using SkyDrive? I want to test in my PC.
Regards,
George Zhao
TechNet Community Support

Issue when creating a new email account on Adobe BC

Hi,
I got a big issue when I tried to create a new email account for my site, which is a very email account to me, and I had been using that email address for over 10 years.
Here is the issue, When I created this email account, Adobe BC keep telling me that account has been created (please see the screen shots below), but I did not see this email account on the BC's backend email account list at all. I tried to create that email for over dozen times, it just won't work!
Please anyone who can help me on this, or anyone from Adobe BC tech support team, please contact with me. Becasue I having hard time finding your tech support telephone numeber.
Thank You.

Hello designonly.
You are saying that you have been using that email address for over 10 years. So you are trying to make an address which already somewhere exists?
That brings me to another thing - is the DNS setup made well? In order to make email address work, you should edit the A-Name & NS. Sometime even more settings (depend on domain registrar).
designonly, is this your first email setup?

My Gmail app tab is not glowing when I receive new email

On Firefox 4, when I received new email my Gmail app tab would glow. Now when I have Firefox 5, it no longer works. Is it a setting issue or a version issue?

HI,
I have found this to be somewhat intermittent.
I often miss the first "new Message" that is sent, no matter which service it is with.
However after I have replied at least once I can bring other apps to the front and then I hear the Sound and the Notification appears.
As of yet I have not discovered though, a way to make it work first time every time like it should.
9:27 pm Saturday; November 30, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

FCPX not responding when creating new project

My FCPX isn't responding when I'm trying to create and edit a new project. I can create a new event, import a video in but if I try to play it or create a new project to drop it into it stops responding and all I see is the beachball twirling. I need suggestions and fast. Already erased FCP preferences, did the purge script and repaired disk permissions in case it was a RAM issue. No other programs seem to be having an issue.. and I've been using FCPX just fine for 8 months..HELP
Final Cut Pro X, Mac OS X (10.8.5)

Try these general troubleshooting strategies.
Use this free app to trash the preferences even if you have already done it. This should be the first thing you try when any problems occur.
         http://www.digitalrebellion.com/prefman/
Shutdown FCP X before you do it.
2. Trash Layouts folder. With FCP X shutdown, hold down option key and select Go>Library>Application Support>Final Cut Pro . . . trash the Layouts Folder.
3. Open Disk Utility and Repair Permissions.
4. Trash FCP X using this free app and reinstall it.
      http://www.digitalrebellion.com/fcsremover/
5. If these 4 measures don't work, create a new User Account (Admin) in System    Preferences and try running FCP X from that as it sometimes works miracles.

Outlook 2013 Not Responding

We have a server running Exchange 2010 within an AD Domain.
A domain client machine installed with Office Pro Plus 2013 running Windows 7 Professional 64-bit.
When opening Outlook 2013 the application automatically enters the "not responding" state.
I've tried the following:
> Creating a new mail profile
> Repairing Office through Programs & Feautures
> Clean install of Office 2013
Anybody care to elaborate and give me a clue? We have a machine in the same room on the same set-up which is not experiencing these issues.
HELP!!

Hi,
Also have a look at this KB article which listed the detailed steps to troubleshoot Outlook crash:
http://support.microsoft.com/kb/2632425
If the problem still persists, please use the Event Viewer tool and provide us more information about the Outlook crash. See:
http://windows.microsoft.com/en-in/windows/open-event-viewer#1TC=windows-7
http://www.msoutlook.info/question/317
Regards,
Steve Fan
TechNet Community Support

Outlook 2013 Not Responding and Offline Address Book Issues with Office 365

Around 3 months ago I setup a small business with Office 365 for email. They have 10 PCs, all running newly installed Windows 7 Professional 64-bit, eight with Office 2013 and two with Office 2010. All are connected to a local domain (Server Essentials
2012) with a single internet connection through a new TP-LINK router. Each user logs into their own PC only.
The network runs perfectly, internet connection is good but there seems to be RANDOM, INTERMITTENT issues with email not being SENT from Outlook every so often. Email will sit in the outbox for up to an hour sometimes before, eventually, being sent. Incoming
email seems ok, although this is more difficult to tell. At others times, email will be sent instantly - the size of the message and any attachments makes no difference.
The issue has happened at some point on every one of the PCs but no particular PC/user seems worse than any other. When email is stuck on one user's PC it can still be sent ok by other users at the same time - so the internet connection is not down. Users can
can always login to the OWA service ok and iPhones etc. all sync ok even when email is stuck in the Outbox.
To debug the issue I have worked on one particular user's PC and carried out the following changes -
Changes that made no difference
I have checked the router. A SPI firewall is available on the router but this is switched off.
I have changed the MTU on the router with no effect.
There are no unsual add-ins to Outlook
Outgoing email virus scanning is disabled
Outlook is NOT integrated with Lync
The OST file is around 1.7 GBytes is size.
I have recreated the Outlook profile twice but this made no difference
Switched OFF "Cached Exchange Mode" - this made things worse !
The Outlook address book is set to \Offline Global Address List
I have disabled with Windows firewall on the client PC - no change
I have adjusted the KeepAliveTime for packets in the registry of the PC to 20 minutes
Changes that reduced the frequency of "Not Responding"
I have changed the Outlook automatic Send/Receive time from 30 to 10 minutes - this seemed to help
Possible Related Problem
I have attempted to download the offline address book manually - this hangs at "Copying offline address book template file" in the Send/Receive dialog and there a NO OAB files in the data file location on the PC.
So the only measure that has so far "helped" has been the Outlook Send/Receive time change - now set to 10 minutes. Even so, Outlook will occasionally go "Not Responding" for 30 minutes or more (no windows active - only option
is to close and reopen Outlook).
There does seem to be a problem with the Offline Address book. I can download this ok for this user on my home PC (Outlook 2010) but this will not download manually on the work pc with Outlook 2013 (despite following all the debug steps above).
On work PC I can see literally hundreds of "Schannel" errors in the Windows System event logs -
Error - Event 36888 Schannel
The following fatal error was generated :10
The internal error state is 10
These errors occur every 2-4 minutes continually all the time Outlook is running. When Outlook is closed the "Schannel" errors stop !
Can anyone suggest what else to try, please ?
I have already investigated this issue on the Office 365 Community Forum, and the Outlook forum and they suggested that it was a client (i.e Outlook) issue and that I should post here for further information.
Thanks for reading !

An update to this problem.
I brought one of the office PCs back to my home network and connected it up there. With no changes to the PC I was immediately able to download the Offline Address Book without errors.
This suggests to me that there must be some problem with the internet connection or router setup in the office environment.
The router is a TP-LINK W8970. The internet connection is PPPoA. I have seen some suggestion that an SPI firewall can cause issues. This router has an SPI firewall but this feature is disabled on the router.
While investigating this issue I have frequently been connected remotely to an office PC - sometimes for up to an hour or more. During these periods I have not experienced any connection dropouts so the actual internet connection seems to be ok (i.e. it is
not dropping out).
However, something seems to be preventing the Outlook client from connecting properly with the Office 365 Exchange server in the office environment - or something is dropping the connection to Outlook. Does anyone know of any router settings that might affect
this ?
I could try changing the office router but I do not have a spare available. Can anyone suggest a reasonably low cost, currenbtly available router that they know definitely works in the Office 365 environment so that I could buy this for test purposes ?

List data validation failed when creating a new list item but does not fail when editing an existing item

Dear SharePoint Experts,
Please help.
Why does my simple formula work in Excel but not-work in SharePoint?
Why does this formula...
=IF([Request Type]="Review",(IF(ISBLANK([Request Date]),FALSE,TRUE)),TRUE)
...work in Excel but fail when I try to use it in SharePoint?
The intent of this formula is the following...
If the field "Request Type" has the value "Review" and the field "Request Data" is blank then show FALSE, otherwise show TRUE.
SharePoint saves the formula, but when a list item is saved where the formula is implemented, (under List Settings, List Validation), SharePoint does not, say anything other than that the formula failed.
Note that the "list data validation failed" error only happens when I am creating a new item-- the formula above works just fine when one is trying to Save on the edit form.
Can you help?
Thanks.
-- Mark Kamoski

Dear Jason,
I appreciate your efforts.
However, it seems to me that this statement of yours is not correct...
"If it meet the validation formula, then you can new or edit the item, otherwise, it will throw the 'list data validation failed' error, it is by design".
I believe this is NOT the answer for the following reasons.
When I create a new item and click Save, the validation error is "list data validation failed".
When I edit an existing item and click Save, the validation error is "my custom error message" and this is, I believe, the way it needs to work each time.
I think, at the core, the error my formula does not handle some condition of null or blank or other default value.
I tried a forumla that casts the date back to a string, and then checked the string for a default value, but that did not work.
I tried looking up the Correlation ID in the ULS when "list data validation failed" occurs, but that gave no useful information because, even though logging was set to Verbose, the stack trace in the error log was truncated and did not given any
good details.
However, it seems to me that SharePoint 2013 is not well-suited for complex validation rules, because...
SharePoint 2013 list-level validation (NOT column-level validation) allows only 1 input for all the multi-field validation formulas in a given list-- so, if I had more than 1 multi-field validation rule to implement on a given list, it would need to be packed
into that single-line-of-code forumla style, like Excel does. That is not practice to write, debug, or maintain.
SharePoint 2013 list-level validation only allows 1 block of text for all such multi-field validation rules. So that will not work because I would have something like "Validation failed for one or more of the following reasons-- withdrawal cannot exceed
available balance, date-of-birth cannot be after date-of-death,... etc". That will not work for me.
The real and awesome solution would simply be enhancing SP 2013 so that column-level validation forumlas are able to reference other columns.
But, for now, my workaround solution is to use JavaScript and jQuery, hook the onclick handler on the Save button, and that works good. The only problem, is that the jQuery validation rules run before any of the column-level rules created with OOTB
SP 2013. So, in some cases, there is an extra click for the enduser.
Thanks,
Mark Kamoski
-- Mark Kamoski

Outlook 2013 'Not responding' errors

Hi,
I'm looking for someone who can help me with an issue that's been the been of my existence for the last couple of weeks/months. I tried every suggestion the Internet has to offer and I'm kinda at the end of my rope here.
On a couple of our workstation we are experiencing serious problems with outlook 2013. The users who use outlook extensively (administrative and management) get 'not responding' messages at random intervals. This can occour when typing a mail, navigating
in Outlook,...
Most problems occur when working in the calendar ans when planning appointments in calendars of other user.
They all use Windows 7 pro 64b laptops that are no older then a year. When they used outlook 2010 none of them experienced any problems.
Here's a summation of what i tried already
- Reinstall office
- Reinstall OS
- Replace laptop
- Latest Update
- Disable all COM-addins (in outlook and in registry on all levels)
- Disable hardware acceleration (in outlook and registry)
- Ran the Outlook FIXIT tool
- Ran OFFCAT
None of the diagnostic tools i used reveal any critical errors.
When i check the log, there is an error but it doesn't reveal any info as to what caused it.
System
Provider
[ Name]
Application Hang
EventID
1002
[ Qualifiers]
0
Level
2
Task
101
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2/7/2014T07:50:22.000000000Z
EventRecordID
9259
Channel
Application
Computer
TENLT027.TENGROUP.local
Security
EventData
OUTLOOK.EXE
15.0.4551.1511
201c
01cf23d7c1847530
16
C:\Program Files\Microsoft Office 15\root\office15\OUTLOOK.EXE
76519cf1-8fcc-11e3-a18a-8056f2cf00b5
55006E006B006E006F0077006E0000000000
Binary data:
In Words
0000: 006E0055 006E006B 0077006F 0000006E
0008: 0000
In Bytes
0000: 55 00 6E 00 6B 00 6E 00 U.n.k.n.
0008: 6F 00 77 00 6E 00 00 00 o.w.n...
0010: 00 00 ..
Any help would be appreciated cause our management is starting to lose there patience and i have no idea what more i can try.
Regards,
Brecht

Hi,
Which account type are you using? If you are using Exchange server account, please swtich the online/cache Exchange mode to check the result
Please also check if the Outlook data file size exceed the limit? If so, it may cause some unexpected behavior. Please refer to the following KB article to change the data file size limit:
http://support.microsoft.com/kb/832925/en-us
In addition, please have a look at this KB article and try the troubleshooting steps regarding Outlook crash.
http://support.microsoft.com/kb/2632425/en-us
Regards,
Steve Fan
TechNet Community Support

Webapp not found when creating a new portal

Hi all,
I've just started exploring Weblogic Portal 8.1, and am now attempting to set-up a basic portal from scratch. Here's what I did.
1) Created a Weblogic Portal Domain using the Configuration Wizard. The domain name is "mydomain". The server name is "myserver".
2) In Weblogic Workshop, created a new application called "testportal".
3) In "testportal" application, created a new portal web project called "portal".
4) created "myportal.portal" portal in the "portal" portal web project.
5) Tried to start the portal (URL: http://localhost:7001/portal/myportal.portal), but received this error message:
<b>"Webapp portal not found in application testportal."</b>
6) When I tried to hit http://localhost:7001/portal, I was able to hit index.jsp for the web application, so the portal web app is alright.
Any ideas what I'm missing here?
Thanks!

I'm not sure of what is going on but just wondering.. did you drag and drop portlets on to the portal?
I recommend you to try the below step-by-step tutorials.
Check this out. http://e-docs.bea.com/wlp/docs81/startdev/startdev.html
And try this. http://e-docs.bea.com/workshop/docs81/doc/en/portal/tutorials/tutFirstPortalIntro.html
Seenu.

Outlook 2013 Not Responding Windows 8.1

I updated to 8.1 last week. Since then my Outlook (2013) will occasionally freeze. It sits at Not Responding until I close it or restart Outlook. Once it refused to send messages in my Outbox. Upon restarting Outlook the outgoing messages were lost, meaning
not in Outbox and not Sent.
My email is run on a third party Exchange Server and they believe it is a MS problem. Any thoughts on what I need to update, etc?

Hi,
Are you using Outlook with Cached Exchange mode enabled? If not, please enable it to check the result.
Please first try to open Outlook in safe mode to check if this issue is caused by problematic add-ins. To do this, hold Ctrl key and then double-click on the Outlook shortcut to open it. If the problem would be gone in safe mode, please go to File >
Options > Add-ins and disable suspicious add-in to resolve the problem.
If above doesn't help, please follow the steps in the KB article below to troubleshoot the issue:
http://support.microsoft.com/kb/2652320/en-gb
Regards,
Steve Fan
TechNet Community Support

Outlook 2013 not responding upon startup

Good day
We have a client that is running Windows Multipoint server on a Dell server, the remote users connected to the server can not open Outlook 2013, when they try open Outlook 2013 it would crash and state that Outlook can not open at this time please try again
later.
Please advise on what to do to solve this matter.
Thank you in advance.

Hi,
Are you using Outlook with Cached Exchange mode enabled? If not, please enable it to check the result.
Please first try to open Outlook in safe mode to check if this issue is caused by problematic add-ins. To do this, hold Ctrl key and then double-click on the Outlook shortcut to open it. If the problem would be gone in safe mode, please go to File >
Options > Add-ins and disable suspicious add-in to resolve the problem.
If above doesn't help, please follow the steps in the KB article below to troubleshoot the issue:
http://support.microsoft.com/kb/2652320/en-gb
Regards,
Steve Fan
TechNet Community Support

Can I save notes in the Notes App, using my existing iCloud account and not have to create a new email?

Hello,
I recently purchased an iPhone 5 and I'm having trouble with my Notes.
After making some notes and saving them, I synced to my iTunes and the notes were not on the phone any more. When I go into the Settings menu, in the iCloud section, clicking on Notes asks me to create a new iCloud email. I have an iCloud account already and I don't want to have to manage multiple email addresses. Is there a way for me to get the Notes to save and sync without making another email account?

I believe that the creation of an icloud email address is the method by which the notes are stored. This would be transparent to you, as you do not have to give the email address out, or use the email account. So, if you wish to sync notes with icloud (and have them available on the web interface as well as your other devices), you can create the email and turn it on. If you don't use it, you shouldn't need to check it.
HTH

Get "not responding" when try to print email data -- IE works fine

When I try to print any email material, Firefox state a "not responding" data and I have to close the program and start all over again. The only way I can print is to copy and paste, then I can print

Hmmm, seems you are not alone - Data/Service not working this morning?? someone else with the same situation, but I don't know where they are located.

Outlook 2013 not responding when creating a new email item in Windows 8

Similar Messages

Maybe you are looking for