Apple iMac overheating or busted?
I have a 2.8GHZ C2D iMac from Mid 2008. I have been running Windows 7 via bootcamp fairly extensively. This morning I was on my bootcamp partition and the screen suddenly turned completely white. The computer was completely unresponsive, so I turned it off. A minute or two later, I turned it back on. It powered on fine, the start up chime sounded, but then it immediately and repeatedly sounded until I turned the computer off. I was worried, so I powered it down and unplugged it. At this point, I had to leave for work.
At first, I thought I had fried the graphics card. Now I think it just overheated. I used the computer a ton yesterday (almost all day), but it was off overnight and only on for an hour or so before it did this.
Any thoughts?
Pax, have you find out how to fix it yet? I have the EXACT same problem. I run windows 7 extensively and the computer get very hot. The first sign would be the IMAC starts to lag. I tried to restart but when the white screen comes back on it's stay there for about 5 mins+, then there's a folder with ? mark starting to flash.
Anyone knows how to fix this?
Message was edited by: asiantrick
Similar Messages
-
This 24" Apple imac computer is fantastic in all ways that I've used it, yet my 24" imac has been recently overheating and shutting down without notice. As a mechanical engineer looking over the design of this flat screen PC at the back I note the cooling fins are the wrong way round for maximum cooling, so assume this is a manufacturing defect because heat rises upwards not downwards.
So do Apple management accept the flaw in the design of the imac 24" with the direction of the cooling ducts and rectify the problem as soon as possible, or do they ignore this problem in the cooling system of many imacs distributed around the world?
The imac 24" is a fantastic machine to use, and by Apple tech turning around the cooling vents by 180 degrees the venting problem will probably disappear.
Sometimes the simplest of solutions are blindingly obvious!!!
Message was edited by: richvidi get what u mean about the vent, i was thinking the same thing BUT;
i was reading something on wiki a while ago about the OLD apples, i mean real old like the SE (i think)...
- they initially didn't have fans and they used to overheat (more so when people rested papers on top blocking the vents) - but their design was to allow the heated components situated towards the top to actually draw cold air through the bottom of the machine and up inside - past other components and out the top and hence cool it effectively, then apple started using fans...
- i think apple still use a combination of fans and the radiated heat to cool the imacs of today, the components that get hot are situated at the top of the aluminum macs and the aluminum itself heats up allot which makes it radiate the heat outwards like a heatsink and then fan kicks up to help it along when needed, maybe the design of the vent helps this process? i.e. the vent causes the aluminum to heat up more and radiate more heat than if it were the opposite way - perhaps if it were the other way, the fans would have to run a tiny bit higher and possibly over time suck more dust in and create more problems?
couldn't find the article on the apple computers to what im trying to communicate here - dont remember the right terminology to explain it all properly but try researching heatsinks on wiki - heatsinks work on the same sort of process -
RE: Apple iMac 27 Hard Disk Replacement Complaint
Dear Customer ServiceManager,
RE: Apple iMac 27” Hard Disk Replacement Complaint
On May 12, 2011, Ibought an iMac 27” for my daughter from your official Hong Kong website (www.apple.com/hk).
I am writing tocomplain about my dissatisfaction of your poorproduct quality, irresponsibleattitude of your customer service, and most importantly my painful experience with your Apple Careservice. I am also very disappointed with how your Apple Care staff made a discriminating comment about your low income Hong Kong customers.
On July 28, 2011, mydaughter received an email from your company ([email protected]) informing her that the hard disk of her newly purchased iMac wasdefective due to factory error. You promised to replace the defective hard disk with a brand new onefree of charge, but when she asked your HK Apple technical support if therewould be on-site replacement service, your staff told her that she can onlyeither carry the 30-pound iMac herself to their service center or pay HKD1200for the Apple Care which offers the on-site replacement service.
First of all, I foundyour request very unreasonable. Mydaughter was not the one who broke the hard disk, your company informed herthat you gave her a defective one. So why is the responsibility and the cost of taking the iMac for repairshould be borne by her, as an innocent customer, who paid HKD18, 000 for aniMac directly ordered from your official website? She did nothing wrong but your company required her to barethe cost of transporting a 30-pound iMac and the risk of causing damage on theway.
Secondly, I believeyour company has deceitfully forced my daughter to buy your Apple Care, whichis completely against her original will. Since she is just a 22-year-old girl, it is impossible for her to carrythe 30-pound iMac by herself. Andclearly, she was not given a choice but had to pay HKD1200 for the AppleCare. This made me doubt if thisis a scam of your company. Is thisa way of how Apple make extra money by giving your customer faulty products anda mission impossible, then forcing us to pay for a service that we did notneed?
Anyway, thepainfulness of enjoying your Apple Care service has just started…
On Aug 10, 20111:30pm, your service man came to change her hard disk with just a look as ifthe process was very ‘efficient’ and left after half an hour, even her Mac OShas not yet been completely installed. After he left, my daughter found that the OS could not be installed, soshe called your service center immediately and under her strong request, he hadto come back on the same day and check the new hard disk. He found it proved to be a defectiveone again. I was shockinglysurprised that your company, which always claims to produce products of highquality, selling at an expensive price, replaced my claim-to-be defective harddisk with a defective one again. Iwonder how Apple’s quality control is done? Your company didn’t even bother to check if the new harddisk is working before replacing it for customers.
My daughter requestedfor a new one, but then your service center said they had no new stock andasked her to wait until further notice. But without any definite date, it means my daughter’s brand new computercannot be used for… I don’t know how long. Please notice that I paid HKD18,000 to buy a first-classproduct of high quality, as claimed by your company all over the world.
So my daughter had tocall your service center again and forced them to return her original harddisk. Till 5:00 pm on the sameday, another technician came to reinstall her original hard disk into hercomputer. Surprisingly, all thedata in her original hard disk was still there, which means there is a riskthat all her personal data and information had been accessed by your servicecenter staff.
As a father, I had totake over the matter from my daughter and called your hotline 2112 0099 at5:00pm on Aug 10, 2011. After 30minutes, I could finally talk to one of your technical support staff for 10minutes about my complaint. Heasked me to hold the line and wait for him to transfer my call to his seniortechnical support colleague, so I kept on waiting for 15 minutes, but finallythe line was being cut and no body contacted me and my daughter again.
I had to call yourhotline again at 6:00 pm and waited for another 15 minutes to reach one of youradvisors. He passed my line toyour senior technical support advisor located in Singapore. He said he is just a technical supportadvisor, so he could not take my complaint directly. He needed to talk to meagain on the next day with a customer service advisor. He promised if he could not reach me onmy mobile phone, he would leave his direct line for me so that I would not haveto waste another half an hour to reach him through the hotline.
On Aug 11, 2011 5:28pm, I received a voice mail from your senior technical support advisor asking me to call him back but he didn’t leave any direct telephonenumber as he promised. So I triedto call back the caller ID, which was shown on my phone. However, the auto reply of this numberwas, “This is an invalid number”. I asked the Hong Kong Telephone Company to help me to call but even theycould not reach this number. Theytold me this number was from Shanghai, China. So I had no choice but to call your hotline again. After 25 minutes, one of your advisorstook my call and I had to repeat my story to him again in order to have him putme through to talk to your senior staff 42058 again. I asked him why he didn’t leave his direct number for me tocall him back as he promised. Hesaid he forgot! What a surprisinganswer to leave your customer nothing but a number that he knew clearlycouldn’t be reached.
By that time, I havewasted nearly 45 minutes to reach him, and it was already 6:20pm and thecustomer service advisor was off work. Therefore, I made an appointment with him again and we agreed that hewould call me between 9:31-10:00am on Aug 12, 2011 morning. I took half day-off from my work towait for your senior staff to call me.
Unfortunately, Iwaited until 10:10 am and nobody contacted me again (I left both my mobilenumber and email to them).
Finally, I called the hotline again and waited for 15 minutes, an advisor put me to your on-dutyCustomer Service Manager, Ken. After I told him my name, he realized that he should be theone responsible for calling me this morning, but since he had a meeting thatmorning, he forgot to call me again! The Apple staff didn’t keep their promises after all which disappointedme a lot. It seems to me thatApple is unwilling to accept negative feedbacks from customers.
Ken told me thatthere was nothing he could do.
At the end, I wasreferred to a Customer Relations staff, Ms. Wing Liu. Her response was also there is nothing she can do exceptgiving me a case number of my complaint. Since then, I never get any response from Apple regarding my case.
I believe Apple has afull record of all my conversations with your staff and thus, should be able tolook into my case thoroughly. Isincerely hope that Apple can take my feedback seriously and respond to my complaintin a responsible manner, but not just trying to suppress your customers, whohave already been treated unfairly, from claiming their rights. Otherwise, it is really a shamefor Apple to claim itself delivering high quality products and services allover the world.
Yours truly,
Tommy Fong
Apple Customer
<Personal Information Edited by Host>I just realize Apple might have blocked my daughter's Apple ID from posting in your discussion forum.
My daughter was trying to go to this Community Page by logging into her account. But your Communities webpage displays a "We'll be back soon" webpage. Then I try to login with my Apple account and it works fine.
<Email Edited by Host> -
I have been unable to find and import from the version of Firefox on my Dell laptop to an Apple iMac the folders containing bookmarked website addresses. In the process, I've created a mishmash of unwanted bookmarks. Please provide me a step by step process to import the folders to the version of Firefox on the iMac. The process to accomplish this seems very awkward and counter-intuitive. The same goes for creating new folders and bookmarking website addresses to those folders on the version of Firefox installed on the iMac.
Chris,
Thanks for the tip about the Firefox Sync feature. A friend and I managed to use the Sync feature to "transfer" the folders of Bookmarked website addresses from the Dell to the iMac. We found that shutting off and rebooting the receiving iMac computer was necessary for all the folders to transfer over. Also, the entire process would have gone more smoothly had we had separate internet connections for the two computers, but we managed to shift our single internet connection between the computers as the Sync process progressed through its steps. Definitely a learning process.
Thanks,
Charlie -
I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.
I get the message “Adobe Lightroom 1. Cannot be installed on this disk because a newer version of this software already exists on this disk”
If it is here – I cannot find it anywhere, and I don’t believe that I ever installed it.
I have ordered the upgrade to Lightroom 5.0 and figured that I should install Lightroom 1.0 first.
How can I solve this problemActually when LR 5 starts for the first time after it is installed it will have a dialog to Buy, Try or Enter a serial number. You select Enter a serial number and enter the LR 5 serial number first and then because it is an upgrade serial number it will ask for the serial number of a Previous version. You then enter the LR 1 serial number.
-
Apple IMac 27 has a problem. Random black screen. Over 1 year without any fix
Apple IMac 27 has a problem.
Random black screen.
Over 1 year without any successful fix.
IMac 27 10.8.4 (12E55) - bought in 2010
3.06 GHz Intel Core 2 Duo
4GB 1067 Mhz RAM
Graphics ATI Radeon HD 4670 256 MB
The IMac computer screen goes black randomly but the machine still running beyond.
In order to go back to normal i need to awake the computer by hitting with the pointer a hot corner previously created " sleep mode" ( top left ).
..the black screen would come back after one second again..and then again and then again and then again..with different intervals..sometime 2 seconds after the other, sometime as soon as appears the user login screen.
I took the machine to an Apple Store two times over one year, they opened, cleaned it but they didn't replace anything has they could not understand what they real problem was. I was happy for that because they didn't try to make me spend money on something which was not going to solve my issue for sure.
Last time i kindly asked them to inspect everything meticulously, part by part, i left the machine with them for over 2 months. They couldn't understand why this was happening..after couple of weeks, 5 more machines came in with the same problem.
On some of them., upon request of the client they changed the graphic card but apparently this was not the fix, the problem come back again. Apparently changing the graphic card or the screen or else it didn't solve any problem to anyone. I'm almost thinking to "trough it out of the window"..we all spend money for this machines and i think we need to know if Apple is looking in to this or not.
Lately i tried to do an SMS RESET and PRAM RESET, it feels it got better a little but problem still coming back.
Also, all usb devices are disconnected and the problem still there
Below you will see a copy of the console report. I honestly don't understand much of it as i'm not a computer guy.
27/07/2013 11:03:39.837 WindowServer[119]: Created shield window 0xb3 for display 0x04272d40
27/07/2013 11:03:39.837 WindowServer[119]: device_generate_desktop_screenshot: authw 0x7fad92c79dc0(2000), shield 0x7fad92c34370(2001)
27/07/2013 11:03:39.906 WindowServer[119]: device_generate_lock_screen_screenshot: authw 0x7fad92c79dc0(2000), shield 0x7fad92c34370(2001)
27/07/2013 11:03:41.701 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92c79dc0(2000), shield 0x7fad92c34370(2001), lock state 3
27/07/2013 11:03:41.702 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:03:41.704 WindowServer[119]: Created shield window 0xb4 for display 0x003f003d
27/07/2013 11:03:41.704 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92c79dc0(2002), shield 0x7fad92c34370(2001), lock state 3
27/07/2013 11:03:41.704 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:03:45.186 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist[740]) Bug: 12E55: launchd + 95444 [7DCC9489-2DF5-3807-83FA-EF5666EE8078]: 0xd
27/07/2013 11:03:45.208 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
27/07/2013 11:03:52.117 WindowServer[119]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
27/07/2013 11:03:52.118 loginwindow[43]: find_shared_window: WID -1
27/07/2013 11:03:52.118 loginwindow[43]: CGSGetWindowTags: Invalid window 0xffffffff
27/07/2013 11:03:52.118 loginwindow[43]: find_shared_window: WID -1
27/07/2013 11:03:52.118 loginwindow[43]: CGSSetWindowTags: Invalid window 0xffffffff
27/07/2013 11:03:53.763 WindowServer[119]: Created shield window 0xba for display 0x04272d40
27/07/2013 11:03:53.763 WindowServer[119]: device_generate_desktop_screenshot: authw 0x7fad92c87490(2000), shield 0x7fad92e6eef0(2001)
27/07/2013 11:03:53.838 WindowServer[119]: device_generate_lock_screen_screenshot: authw 0x7fad92c87490(2000), shield 0x7fad92e6eef0(2001)
27/07/2013 11:03:53.880 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92c87490(2000), shield 0x7fad92e6eef0(2001), lock state 3
27/07/2013 11:03:53.880 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:03:53.883 WindowServer[119]: Created shield window 0xbb for display 0x003f003d
27/07/2013 11:03:53.883 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92c87490(2002), shield 0x7fad92e6eef0(2001), lock state 3
27/07/2013 11:03:53.883 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:03:55.209 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist[742]) Bug: 12E55: launchd + 95444 [7DCC9489-2DF5-3807-83FA-EF5666EE8078]: 0xd
27/07/2013 11:03:55.252 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
27/07/2013 11:04:04.482 WindowServer[119]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
27/07/2013 11:04:04.482 loginwindow[43]: find_shared_window: WID -1
27/07/2013 11:04:04.483 loginwindow[43]: CGSGetWindowTags: Invalid window 0xffffffff
27/07/2013 11:04:04.483 loginwindow[43]: find_shared_window: WID -1
27/07/2013 11:04:04.483 loginwindow[43]: CGSSetWindowTags: Invalid window 0xffffffff
27/07/2013 11:04:04.704 WindowServer[119]: Created shield window 0xbf for display 0x04272d40
27/07/2013 11:04:04.726 WindowServer[119]: device_generate_desktop_screenshot: authw 0x7fad92ebdb20(2000), shield 0x7fad92e6eef0(2001)
27/07/2013 11:04:04.795 WindowServer[119]: device_generate_lock_screen_screenshot: authw 0x7fad92ebdb20(2000), shield 0x7fad92e6eef0(2001)
27/07/2013 11:04:05.245 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92ebdb20(2000), shield 0x7fad92e6eef0(2001), lock state 3
27/07/2013 11:04:05.246 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:04:05.253 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist[744]) Bug: 12E55: launchd + 95444 [7DCC9489-2DF5-3807-83FA-EF5666EE8078]: 0xd
27/07/2013 11:04:05.249 WindowServer[119]: Created shield window 0xc0 for display 0x003f003d
27/07/2013 11:04:05.249 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92ebdb20(2002), shield 0x7fad92e6eef0(2001), lock state 3
27/07/2013 11:04:05.249 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
I'm now thinking to try to take the machine to its original firmware and see if it still does it, does anyone have any sugestion?
I use a lot photoshop and other image software, this computer is essential for my work. For more then one year this issue caused me problems.
Luckly i have a Macbook Pro too and i managed to do some of my work there. At last I was thinking to buy an external screen and attach it to the Macbook pro in order to work on my big images. But who wants to spend money again!!!???? This is not a fixture, this is silly. I wish to have my IMAc working again.
The warranty it's obviously over and this problem happened right after the warranty was over...
I write this post because i'm so tired of this issue and online nothing can be found apart from posts from so many people that have the same problem and no fixture has been found.
The only fixture seams to be to buy a new computer... Ole'!!!..new money flowing in in the cashier!! forget it!!! i would rather change company if apple doesn't respond to this.
For over 10 years i have been a Apple owner..
When this problem appears it's like someone it's playing a joke at you...
Comments welcome..
ThanksHi, I've seem to have found out the source of the problem.
The issue is related to heat, and an iMac 27" gets hot pretty fast.
If I boot the iMac straight after first start into Windows 7 I seem to get a lit built-in display at all times. I can also boot OS X first and then into Windows 7 and the built-in screen get lit every time as long as the iMac isn't hot.
Strange thing is that the monitor connected to the display port gets lit every time. So I can only assume that the heat only interfere with output to the built-in LED screen.
So this iMac is going to an Apple premium reseller for service, and I'll tell you guys how it went. -
hi i have a apple imac 27 2009 and i have purchased mountain lion but near the end it says An error occurred while running scripts from the package “mzps6175750011235388779.pkg”
can you please advise me what should i do to fix thisSome ideas.
https://discussions.apple.com/message/20034600#20034600 -
Ipod nano 4gb connect to windows xp and apple imac at the same time
can i connect my new ipod in my windows xp and download my songs then can i go to my new apple imac computer and connect my nano to that one as well and start downloading my songs i was told it will erase all my songs help!
The link Mitch posted explains how to use an iPod with more than one computer.
Now, because you use a Mac and your Mum uses Windows complicates matter slightly.
An iPod formatted for use on a Mac cannot be used on Windows without some additional software. This is because Windows is incapable or reading the file sytem that Macs use.
However, if you were to reformat the iPod on your Mum's Windows PC, then you could use it on both Mac and Windows computers.
Clearer now? -
I am running an Apple imac G-5 with OS 10.5.8. Processor: 2 GHz. Memory: 2 GB DDR SDRAM. I am getting the message that my version of Safari is no longer working. I downloaded a newer version of Safari and I got the message that it would not work with my OS 10.5.8. Does any one have a suggest
Your post somehow found its way to a little-viewed forum for an obsolete Apple productivity program. I have asked the Hosts to move you to a more active and appropriate forum for your product.
-
Hi, im interested in buying this iMac on eBay - here is the sellers description of the faults, from the sound of it the seller is not the nicest of people so i apologise on his behalf for any foul language he has written,
So im wondering if i was to buy this, is it easy to fix? what would i need? what would i need to do? i was wondering maybe just changing the hard drive and re installing everything?
FAULTY Apple iMAC 27” 3.06Ghz
I bought this very, very expensive, stupid computer “BRAND NEW” from Apple UK in April 2010. It was fine for months but then, very occasionally, I got the messages:
“Safari has quit unexpectedly” or “Safari plugin has quit unexpectedly”
Then I started getting:
“Word has quit unexpectedly”…..ggrrrrrr usually when I hadn’t saved my work for a while.
Other programs started doing it, usually at the most annoying moment causing me to lose my work.
A couple of months ago, just after the warranty ran out it got worse and worse so my son wiped the drive and
re-installed from Time Machine… whatever that is.
No improvement. Then every few days the screen started going grey and telling me to re-start. I took it to someone who knows how to fix computers. After two weeks he returned it and told me it was a cable fault. It was OK for a week, now the AIRPORT does not work and says “Airport Card Not Installed”
!!!!! YES IT IS INSTALLED !!!!
and programs are crashing again.Hi,
I would stay away! It has been listed as faulty so you will get no chance of a refund, also are you able to work on these yourself? Changing a hard drive on these is not a novice task. I would also assume the seller has no apple care and thus you will not be able to get any.
If he took it somewhere that knows what they are doing then they must have checked the drive? thats the first thing you would do before even opening the iMac, and he doesn't say which cable was faulty?
Worst case its the logic board and thats £££££££££ its not worth it!
If it was me and it was cheap then yes i may take a gamble but then i don't have to give it to someone to repair, i can do that myself. Don't buy it to then pay money on a repair, thats my best advise. -
APPLE IMAC 27 IN NOT COVERED BY RECALL
MY APPLE IMAC 27 INCH HAS A FAILED HARD DRIVE BUT ITS NOT SEAGATE. A HARD DRIVE SHOULD LAST LONGER THAN 1 YR AND I FIND IT STRANGE THAT MY HARD DRIVE DOESN'T QUALIFY BECAUSE CLEARLY IT IS DEFECTIVE.
WHAT ARE THE SPECIFICATIONS OF A REPLACEMENT. HARD DRIVECall Apple tech support and/or Customer Relations & ask them.
Typing in caps is considered shouting in cyber space. It's also very hard to read. -
14th May 2013.
We placed an order on medIT (Medit Information Technology) for the following items:
6 units of Apple iMAc-All_in-one-1 core i5 2.9 GHz-RAM 8GB-HDD 1x1tb-GF GTX 660M- Gigabit LAN-WLAN : 802.11 a/b/g/n, Bluetooth 4.0-OS x 10.8 Mountain Lion- Monitor : LED 27”wide- keyboard: English.
We paid to their account; Bank of Cyprus Public Company Limited the full invoice value.
As of today 14th May 2013 we are still waiting for delivery of the goods despite numerous advices that a partial order of 3 items the order has been shipped.
We have made numerous follow up calls to medIT directly and through other customers of medIT, but we have no clue as to when we will receive the goods. On 29th April, 2013 they gave us a FEDEX airwaybill no..We regret that we have not been able to trace this airwaybill on the FEDEX system.
We are, therefore, pleading for assistance from any support group to link us with the right department so that we can have accurate information on the movement of this parcel.
These items were ordered for a government department of the Republic of Zambia and this non-delivery is creating a bad name for Apple Resellers covering Zambian market. The project upgrade of the project is now falling behind due to non-delivery on our part arising from the non-performance on the part of medIT.
We can make available for inspection copies of the order and remittance details to the appropriate office for review and ready reference.
We can be contacted directly on “James A. Ngoma”
<Personal Information Edited by Host>If you ordered from MedIT in Cyprus, they do not appear to be an authorized Apple reseller. If they are indeed not authorized by Apple, there will be nothing Apple will be able to do to assist you in this matter. You will need to work the problem out with MedIT, obtaining legal assistance in Cyprus if necessary.
Regards. -
I Need Help with My 2009 24inch Widescreen Apple iMac Computer
ok I Have TechTool Pro 8 on My 2009 24inch Apple iMac Computer & I Ran The Sensor Test on My 2009 Apple iMac Computer & it say's it Failed The Test so what can i do to Fix that problem??? or can i Fix the problem???
I Never had a Big Problem on My Apple iMac Computer meaning I Never get any problems with it??? so why did My Sensor Test Failed on TechTool Pro 8 ???
so is this a Big problem???I'm not really having any problems at all, but I Do use TechTool Pro to do tests sometimes & Today I Upgraded to TechTool Pro 8 & before I Was on 7 & everything was always working great but This Sensor test is New to TechTool Pro 8 & I Ran the Test & 6 SENSORS Failed so i wanted to know why??? & if it's a Serious Problem i'm having??? I'm just doing Tests like I Always do in TechTool Pro & also I Alway's had TechTool Pro in My Apple iMac Computer since I Bought it in 2009 in July, it came in The Apple Protection Plan I Had when I Bought My Apple iMac Computer & it Allowed Me to alway's Upgrade after that
I Always do Test on TechTool Pro like once a week & i never had problems with nothing
but The Sensor test is new so that's why I Was asking??? maybe everything is fine? i'm not sure??? just checking up on The Apple Forum??? or maybe cause it's new it just say's it has problems??? maybe they need to come up with an Update to fix that problem like they did with EtreCheck ??? i'm not sure??? so i had to check up with you all???
on a Good Part i don't really get any problem's with My Apple iMac computer & EtreCheck work's Fantastic now Nothing Red anymore
also if i did have a Serious Problem with My Apple iMac Computer ??? does this have to do with My Apple iMac Computer having a little bit of Dust in the back of my Apple iMac Computer??? just getting an idea that's all??? -
About using Bluetooth on My 2009 24inch Widescreen Apple iMac Computer.
i need to get info on My Apple iMac Computer does My Apple iMac Computer can Handle Bluetooth 4.0? cause I Wanted to get this New Mac App called Notifyr & it's also Available for Apple iPhone as a iPhone App
you can read more about it here --> http://www.iclarified.com/entry/index.php?enid=40963
i have it all ready but it say's Bluetooth is not Supported on This Mac cause it Requires Bluetooth 4.0 & is not Supported on My Apple iMac Computer & i did not realize it & i already bought The iPhone App for it
but anyway maybe they keep Updating The Mac App & iPhone App Notifyr to work on older Mac Computers in the future???
this App called Notifyr was Created by a 17 Year Old Kid named Joost van Dijk he is the Developer wow a 17 Year old, he thought of a Good idea but it Bluetooth needs to work on all Mac Versions weather Old & New, he needs to Update the App Notifyr to get it to work & i hope he thinking about doing it???
i would like to see all my iPhone Notifications come up on My Apple iMac ComputerBarbera your a Cool person your a sweet person, your awesome & your really a great Help, i appriciate you helping me 2 Thumbs up for you stay cool from Byron.
-
CRASH REPORT
Product: Adobe Photoshop CC
Application running on:
Apple iMac 3.5GHz late 2013 / Mavericks 10.9.2
Application crashes without warning. Symptom: Drop down boxes go blank white (I shot screen captures of blank drop down boxes) and application stops working, actions for appox. 10 minutes preceding crash are lost. Force Quit required to quit unresponsive / frozen application and then Restart of Adobe Photoshop CC
Crash Frequency: Three time in this work day, 5.6.14 Once a day sporadically (approximately 10 times) in past two weeks.
Other applications running at time of crashes: Adobe Bridge - NOT effected. Computer was on line with no browsers open.
Otherwise computer continued to operate normally.
I have been using Adobe Photoshop CC for approximately two months.Thanks, Chris,
I hope that this is the solution.
re: "And a crash report without an actual crash report (a long, detailed text document available from the crash report dialog), is not all that useful" :
I did in deed submit a homemade crash report.
I would have submitted "an actual Crash Report " and sooner, but: When this event occurs. there are NO dialog boxes. All frozen / blank. No possibility of "actual crash report" !
Thank you!
Maybe you are looking for
-
I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the insta
-
I know everyone is having the same problem, with airport virtually dropping the internet unless you are in the same exact room as the router. I've dealt with this for the past 8 months, but I"m really tired of it. Is there a USB connectability i can
-
4.0EA3 : Unable to access mapped drives (Windows) in file browser dialogs
All File Browser dialogs only allow access to by local C: (hard disk) and D: (DVD) drives. It is not possible any more to access mapped drives (which are referencing UNC paths to our file server) - i.e. Network drives. I have tried the following acce
-
Help Pls - Not Enough rm in Library?
I am trying to load 1.8g of podcasts onto Ipod Nano/2g, but the msg says: The owners Ipod cannot be updated because there is not enough free space to hold all of the items in the Itunes library. I've deleted all other podcasts & songs from the Itunes
-
HT201320 Add Account" in the Mail Contacts and Calendars section
This option is not available on my phone. I try to click on Add Account but it is "greyed out" so its not possible. Can anyone tell me what to do to turn this option on? Thanks