Apple TV not updating after new content is added to iTunes

Whenever a new podcast is downloaded or a movie is added to iTunes I have to right click the ATV in the source list and tell it to sync before it become available on the ATV. The ATV's sync settings are set to custom with nothing selected so everything streams and nothing copies over.
Is there a way to stream everything but have it automatically sync every time something new is added to iTunes?
Thanks.

To my knowledge the tv does automatically update itself, although it may not always be as often as you would like. I have 5 tv's all of which auto update and are set up pretty much the same as yours with custom sync but only sync photos and a very small amount of audio. Oddly enough we do have one of the tv's which will auto update immediately after adding content in itunes, ironically I find it a complete pain in the rear, as it will begin to update before I've actually finished updating itunes. (ie, if I add a movie, it will start to update the tv, but it does so before I get chance to add tags to the video, which then causes another update)
The only difference I can see between this tv and the others is that it does have 2 movies synced to it, whereas all the others have none.

Similar Messages

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

  • Streaming foto Apple TV not update after password change

    Hi
    After changing password idapple, my Apple TV has asked to reset the password of iTunes. iTunes Store is ok...but streaming photo does not update the password. The only way is to "tap" on exit and set to start streaming photos.
    But this loses all photos before the month. Happens to you? Is this normal? suggestions?

    I initially started the update process and the saw the TV screen graphic which seemed to direct me to plug my apple tv into my PC.
    Well... after scratching my head and getting a few ideas from discussions I realized there problem probably began due to some loss of transmission between my PC, Apple TV, and my Router.
    Some information I found online suggested that one possible solution was to reset/configure the internet firewall.
    in my case I found the fact that somehow my primary internet browser, chrome, was corrupt and could no longer get to the internet.  This originally happenned a week ago and I though nothinig of it to use my safari browser instead.  Then is clicked.  Itunes was probably trying to use chrome to get to the internet as well.
    Solution:  I removed Chrome from my PC and then was able to connect to ITUNES.  Then I plugged the brick... lol AppleTV into my PC and restored it.  The restore process did the update first and then reset everything to factory settings.
    Everything works fine and it's all so much better.  I'm getting better performance overall and I do see a difference.  Before the update youtube videos would stall several times during playback and now.. it's streaming nice and smoothly!  Purchases on Itunes radio work great as well.  Perhaps AppleTV links direct to the router now rather than performing checks in the transmission via the PC - so it acts now as a truly standalone device?
    I initially started the update process and the saw the TV screen graphic which seemed to direct me to plug my apple tv into my PC.

  • Apple tv not working after new update

    Installed Apple TV update today and after the update was completed it showed the picture of hooking the lighting cable to iTunes.  How can this be done on Apple TV?

    Welcome to the Apple Community.
    You can do this on a friends computer, that has iTunes installed.
        1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
        2.    Connect the micro USB cable to the Apple TV and to your computer.
        3.    Reconnect the power cable (only for Apple TV 3)
        4.    Open iTunes.
        5.    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • HT1386 devices not updating after sync and changes made in itunes not happening?

    Hi, I think my ITunes is corrupt and may need to be reinstalled? Changes made on the Mac in Itunes to playlist do not sync to either our 5 or 4S. other issues in Itunes I've noticed is that adding songs to playlists only works if I drag them...using the drop-down menu and 'add to' doesn't make the change occur.  Any suggestions?

    How is your iPod configured to sync with your iTunes library?  Automatically or manually?  In other words, what options do you have enabled from under the iPod's Music and Summary tabs?
    Syncing music to iPod or iPhone
    B-rock

  • My apple account not updating my credit card

    Hi, my apple account not updating my new credit card i did try to updating after i entring my new card info i press done its says please contact to itunes support when i relogin its show me again my old credit card on my account its not updating my new credit card how please help me fix this problem Thanks

    Accepted forms of payment  >  http://support.apple.com/kb/HT5552
    3262 wrote:
    ... its says please contact to itunes support...
    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • HT3917 My apple wireless keyboard is not working after new batteries installed

    My apple wireless keyboard is not working after new batteries installed.

    Do you get a steady green light to say there is a connection.    If not, are the batteries the right way round.   Do you have a monitor to tell the batteries strength. Is there a reading.   Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

  • Apple tv not working after latest update

    apple tv not working after installing latest update.

    I have the latest update of the Remote app on my iPhonne but still no AppleTV icon visible.
    how can I do a roll back on my Apple TV?

  • How do I sort out 'Apple ID disabled for security reasons' after I had my old Email address and password erased but still showing ?? now I can't access my apple store Apps updates with new email address and password??

    How do I sort out 'Apple ID disabled for security reasons' after I had my old Email address and password erased but still showing ?? now I can't access my apple store Apps updates with new email address and password??

    You might try contacting App Store Support: http://www.apple.com/support/mac/app-store/

  • Apple software not updating - Error message

    iMac locked up (white screen of death) so restarted.
    When it restarted it will no longer update apple applications through the App Store.  Downloads and then starts to instal and comes up with an error message.   (iTunes, iMovie so far) 
    Non Apple programs still seem to update and/or instal.
    Applications still run but not update to new versions.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
              /var/log ▹ install.log 
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. The contents of the log will appear on the right. Each log message begins with a timestamp. Select the messages from the time of the last installation or update attempt. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again. Select the new messages that appear. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    ☞ If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    ☞ When posting a log extract, be selective. Don't post more than is requested.
    ☞ Please don't indiscriminately dump thousands of lines from the log into this discussion.
    ☞ Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting. You may need to use a text editor with search and replace, such as TextEdit.

  • Why is my Apple ID not working after I've reset it, Why is my Apple ID not working after I've reset it

    Why is my Apple ID not working after I've reset it? After I change it the password icon pops up and I type the new password in and it says it's wrong? What's happening

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • Picked Quantity is not updated After delivery in Vl03n

    After delivey in Order (VA03), the picked quantity is not updated Properly(VL03n). It is coming as Zero.
    Is it any configurations needed or writng any code.
    For that I put Break point in FMs like SD_DELIVERY_UPDATE_PICKING in program RVADEK01.
    But it is not stopping the Program.
    Please give any possible solution.

    Hi Vinod,
    Thank u For ur Answer.
    Just my Fuctional Consultant given Procedure.
    How to test the picking list. The problem is after Deliver  the Order quantity in VA03 and after saving, this will creates One Out Bound delivery.
    Now We r checking VL03n. Now it is updating the Picked Quantity Correctly, For that We r using the Standard Print program: RVADEK01, Form: RVPICSKSIN.
    Output Type: EK00, Application: V4.
    Here My problem is We copied the Form and print Program and modified according to our requirement and they configured in Nace with our own Output type.  We haven't chenged the updated Functionality and Not even Standard program. We wrote some include program for getting new values in scripts.
    Now the picked quantity is not updated after picking in VL03n.

  • Outlook 2010 SP1 Profile Does Not Update After Moving Mailbox Between Exchange 2010 SP2 Sites

    I am working on a large mailbox migration from one AD site to another. 
    Exchange version at both sites:Exchange 2010 SP2
    Two Mailbox Servers: MBX01 in site A / MBX02 in site B
    (There is a DAG but keeping this simple)
    Two CAS Arrays: CASA.domain.com / CASB.domain.com
    The RPCClientAccessServer property is set accordingly.  Where MBX01 is set to CASA.domain.com and MBX02 is set to CASB.domain.com
    Clients:Outlook 2010 SP1
    Scenario: I successfully move a mailbox from Site A to Site B.  The Outlook client does not automatically update its server settings to point to the new cas array (CASB.domain.com) and continues to connect to the old CAS server (CASA.domain.com).
    I have seen a few articles regarding this pointing to workarounds such as:
    - repairing the outlook profile on the client
    - delete the existing outlook profile
    - run a script to update the prf file (re-cache's email at the client)
    I am interested in knowing if anyone else has experienced this, what their solution was for a large migration and if any roll-ups or service packs have possibly fixed this problem.
    I would also like to know if you have seen this affect ActiveSync devices.  I am getting mixed results in my tests and thought it may be contributed toward different device types, mobile os versions, etc...
    I have posted this to the Exchange 2010 forum as well, just wasn't sure where to start.
    Thanks.
    Mike

    Hi,
    Seems you got several replies in the thread below that you posted in Exchange forum:
    http://social.technet.microsoft.com/Forums/exchange/en-US/68ae67c1-59f5-44bb-aadc-0aea3f72ad2d/outlook-profile-not-updated-to-new-cas-array-after-mailbox-move-between-sites?forum=exchange2010#68ae67c1-59f5-44bb-aadc-0aea3f72ad2d
    Please come back to the thread above and check if the replies are helpful.
    Since this issue is more related to Exchange, we can provide rarely assistance on this problem. If you need any help on Outlook client side, please don't hesitate to let me know.
    I would appreciate it if you could post the solution here when you found it, so that other community members who have same question in this forum will benefit from it.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • Node.length not updating after removeInstance

    I have a dynamic form where line items can be added dynamically. I also have a button to remove the last line item. The code worked fine until Acrobat 7.0.7 now I get an error that the index in the removeInstance method is invalid. After doing some debugging it appears that the node.length is not updating after a removal of an instance.
    For example, the form starts with 1 line item. (node.length = 2, index = 0)
    I can successfully add a new line item (node.length = 3, index = 1)
    I then can add another line item (node.length = 4, index = 2)
    I can successfully delete the last line item (index = 2) using the following code:
    var nodelength = form1.items.nodes.length;
    //need to know which instance is being removed
    if(nodelength>2){
    items.item.instanceManager.removeInstance(nodelength-2);
    else if(nodelength==2){
    form1.items.items.Status.rawValue = "";
    form1.items.items.guestName.rawValue = "";
    form1.items.items.Payment.rawValue = "";
    form1.items.items.Entree.rawValue = "";
    At this point the items.node.length property should be 3 but it remains 4 thus causing an error when running the above script again because there is no corresponding item to remove.
    This appears to be a bug - but if I am doing something wrong please let me know. If it is a bug, please fix it.

    This sounds like a bug I recently encountered. If it's the same thing then calling xfa.form.remerge() after the removeInstance() should correct the problem. If it is the same issue, it's already been logged in order to get it fixed.
    Chris
    Adobe Enterprise Developer Support

  • HT1923 I could not update the new version of itunes.  I uninstalled the previous version, but I cannot get the new version to update on my windows 7 i5 pc..any solutions?  thanks

    I could not update the new version of itunes 11.1.4.
    It told me to uninstall the old version, but I cannot install the new version.
    Any help?/ solutions?
    Thank you

    Hello jasopz,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Best of luck,
    Mario

Maybe you are looking for