Iphone 4s meeting invitation not working properly also Siri in the UK not 100%!!

Hi,
I recently received an iPhone 4s and have been trying the Siri function out. First of all when I create a meeting I do the following...
Me - "Create a work meeting on Monday at 4pm"
Siri - "Ok, I have created your meeting"
Me - "Add *recipients name*
Siri - "Ok, I have made that change to your meeting. Shall I create that?"
Me - "Yes"
The meeting shows as - "Work meeting with *Recipients name*.
The meeting is sent to my friend via email and when they receive it, it says that they are the organiser and won't let them accept it!! This is a big fault I feel as I will need to use this feature whilst driving to work.
FYI - My friend is on Blackberry so I am not sure if this will affect it?
Also please can someone advise when Siri will be allowed to do searches like... "Where is London" or "what's the traffic like in Stoke" as at the moment it just says it can only do that in America... Again a big issue as it would be very handy whilst driving around for work!!
Other than these issues I think the 4s is fantastic
Thanks

Have you tried "calibrating" it? To do that, use it until it dies completely, then let it sit for 5 hours. Plug it in and let it charge fully. Try that and see if it helps.

Similar Messages

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

In photoshop cc is not working properly right button on the tablet stylus genius

in photoshop cc is not working properly right button on the tablet stylus, when clicked, the menu appears and immediately disappears in Pshotosho CS6 everything was OK, and in other programs all OK.
Tablet - Genius G-Pen M712X.

have you participated on here before, smihop? -- do Adobe representatives ever provide a solution? I pay monthly for all adobe cloud applications <-- doesn't it seem like that should come w/some kind of support? (especially when they push out buggy releases <-- which make me wish I could go back a version)

Iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

First, try to reset by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
If this does not help, connect in recovery mode and restore, explained in this article: iOS: Unable to update or restore

My program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either. I uninstalled the program and reinstalled again but nothi

my program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either.
I uninstalled the program and reinstalled again but nothing gone better-
What should I do?
Best regards

Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up

WRT1900 AC V1 - Linksys is aware that the router is not working properly. Help spread the word.

I just had a conversation with Linksys' Customer Service via chat: Daphne L. J: Hello Fernando Paramo. My name is Daphne L..
Daphne L. J: Welcome to Linksys Global Chat. Is this your initial contact or do you have a case number?
You: Case number is 04971062
Daphne L. J: Please give me 3-5 minutes to pull up and review your case.
You: OK
Daphne L. J: Thank you.
You: I have a WRT1900 AC, V1. The router is not working properly. I have disconnections every few minutes.I already installed the new firmware version and I still have the same issues. I already reset the router to factory defaults and same issues. I have changed the settings back to my personal preferences: Changed the SSID, changed the wireless security settings, changed the DNS and deactivate WPS. That's it.I'm using 5 Ghz mode with my laptops (5 Ghz adapters) and 2-4 Ghz with a few devices (Chromecast, Nintendo 3DS).
Daphne L. J: Thank you for waiting.
Daphne L. J: Please confirm if the following information is correct:
Name : Fernando Paramo
Phone Number :
E-Mail Address :
Model Number : WRT1900AC
Serial Number : 13J10609406280
Country : United States
You: That's correct.
Daphne L. J: Okay. Were you able to check if the devices have stable connection wired to the router?
You: No. I do not have devices with Ethernet ports. Well, only the cable modem.
You: But the modem is fine. No disconnections from my ISP.
You: It is the router.
Daphne L. J: Alright. What is the current firmware version of your router?
You: I tried to return the router to Wal-Mart yesterday with no luck. This is a useless device. And I have been reading comments on the community forums and a lot of people are having problems.
Daphne L. J: We are actually aware of the issue and are working on a resolution. What is the current firmware version of your router?
You: Ver. 1.1.10.167514
You: Latest one.
Daphne L. J: Yes, so you reflashed the firmware, reset and then manually reconfigure it after, not using backup configuration, is that right?
You: That's correct.
Daphne L. J: And it is intermittent on all devices connected to both 2.4 and 5 Ghz networks, is that right?
You: That's correct.
Daphne L. J: Thank you for the information. Please give ,e 3-5 minutes to verify this with my superior.
Daphne L. J: Thank you for waiting.
You: I want to send you my WRT1900 AC and get a V2 or I want a EA8500 and pay the difference myseld.
You: I do not want my current hardware.
You: It is useless for my needs.
You: I can't believe I had an older E3000 that didn't give me any problems.
Daphne L. J: We have already exhausted all possible troubleshooting steps for your concern. As verified with my Supervisor, we will forward your case to our Customer Assurance Team. They are highly technical and knowledgeable when it comes to advanced troubleshooting. They will contact you in the next 24 to 48 hours. By the way, who is your Internet Service Provider? And do you Cable or DSL connection?
You: Cable connection.
Daphne L. J: Who is your Internet Service Provider?
You: A company called .
You: How are they going to contact me?
Daphne L. J: Alright. By the way, on the device itself, on its FCC ID, please check if you have WRT1900AC or WRT1900AC v2.
You: Are you paying attention to me?
You: I already told you it's V1.
Daphne L. J: They will call or email you. Please double check if these informations are correct:
Name :
Phone Number :
E-Mail Address :
You: I told you I want to send you my WRT1900 AC and get a V2 or I want a EA8500 and pay the difference myself.
You: I want them to contact me to my email. I can't answer the phone during work hours.
Daphne L. J: We can't assure you if we will be able to replace it with Version 2 or if you are allowed to have the EA8500 instead.
Daphne L. J: Just in case, do you also have an alternate number?
Daphne L. J: Also, what time zone are you in? And what is your preferred time and day for them to contact you?
You: I have the one from my office in Mexico. Central Time. Any time is good.
Daphne L. J: So, you are currently in Mexico?
You: I work in Mexico but I have the house in USA. I live in the border.
Daphne L. J: I see. Do you have any other questions or clarifications?
You: I live 10 minutes away from the International Bridge. But that's not an issue. I bought the router at Walmart in Laredo, TX.
Daphne L. J: Thank you for the information. Would that be all for now?
You: I want a clarification: Do you realize that there is an issue with the current WRT1900 AC? Are you aware of that?
You: Because this is a very expensive router that is not working as it should be.
Daphne L. J: Yes, we are aware of the issue and are working on a resolution.
Daphne L. J: Would there be anything else you need?
You: That would be it. I will wait for you to contact me.
You: Thanks.
Daphne L. J: Alright. Thank you for giving us an opportunity to serve you through Linksys Live Chat. You may also visit our support site at www.linksys.com. For your reference, your case number is 04980394. Thank you for choosing Linksys and have a great day! We paid $250 for this piece of equipment. That's a lot of money for a device that doesn't work. I just want to get a V2 replacement, or better yet, an exchange for a EA8500. We should all demand this. It is not fair for us. The current WRT1900 AC is a useless device. They even should do a recall of the product. I will wait for them to contact me, but I'm thinking if I should send the information to The Consumerist or someone else. What to do?

FernandoRocker wrote:
Well... instead of looking into this with Engineering, I would prefer you to talk about this with the Sales department and exchange my WRT1900AC for an EA8500 (I will pay the difference if needed). Seriously. The device is useless. Not just a paperweigt... an expensive paperweight.Actually I looking into the swap for you because I think that would be best in your case. Keep this in perspective. There is laterally millions of WRT1900AC V1 out there with very few issues with latest firmwares and of course the odd exception. In your case it could be a defective WRT1900AC.

WRT1900AC V1 - Linksys is aware that the router is not working properly. Help spread the word.

I just had a conversation with Linksys' Customer Service via chat: Daphne L. J: Hello Fernando Paramo. My name is Daphne L..
Daphne L. J: Welcome to Linksys Global Chat. Is this your initial contact or do you have a case number?
You: Case number is 04971062
Daphne L. J: Please give me 3-5 minutes to pull up and review your case.
You: OK
Daphne L. J: Thank you.
You: I have a WRT1900AC, V1. The router is not working properly. I have disconnections every few minutes.I already installed the new firmware version and I still have the same issues. I already reset the router to factory defaults and same issues. I have changed the settings back to my personal preferences: Changed the SSID, changed the wireless security settings, changed the DNS and deactivate WPS. That's it.I'm using 5 Ghz mode with my laptops (5 Ghz adapters) and 2-4 Ghz with a few devices (Chromecast, Nintendo 3DS).
Daphne L. J: Thank you for waiting.
Daphne L. J: Please confirm if the following information is correct:
Name : Fernando Paramo
Phone Number :
E-Mail Address :
Model Number : WRT1900AC
Serial Number : 13J10609406280
Country : United States
You: That's correct.
Daphne L. J: Okay. Were you able to check if the devices have stable connection wired to the router?
You: No. I do not have devices with Ethernet ports. Well, only the cable modem.
You: But the modem is fine. No disconnections from my ISP.
You: It is the router.
Daphne L. J: Alright. What is the current firmware version of your router?
You: I tried to return the router to Wal-Mart yesterday with no luck. This is a useless device. And I have been reading comments on the community forums and a lot of people are having problems.
Daphne L. J: We are actually aware of the issue and are working on a resolution. What is the current firmware version of your router?
You: Ver. 1.1.10.167514
You: Latest one.
Daphne L. J: Yes, so you reflashed the firmware, reset and then manually reconfigure it after, not using backup configuration, is that right?
You: That's correct.
Daphne L. J: And it is intermittent on all devices connected to both 2.4 and 5 Ghz networks, is that right?
You: That's correct.
Daphne L. J: Thank you for the information. Please give ,e 3-5 minutes to verify this with my superior.
Daphne L. J: Thank you for waiting.
You: I want to send you my WRT1900AC and get a V2 or I want a EA8500 and pay the difference myseld.
You: I do not want my current hardware.
You: It is useless for my needs.
You: I can't believe I had an older E3000 that didn't give me any problems.
Daphne L. J: We have already exhausted all possible troubleshooting steps for your concern. As verified with my Supervisor, we will forward your case to our Customer Assurance Team. They are highly technical and knowledgeable when it comes to advanced troubleshooting. They will contact you in the next 24 to 48 hours. By the way, who is your Internet Service Provider? And do you Cable or DSL connection?
You: Cable connection.
Daphne L. J: Who is your Internet Service Provider?
You: A company called .
You: How are they going to contact me?
Daphne L. J: Alright. By the way, on the device itself, on its FCC ID, please check if you have WRT1900AC or WRT1900AC v2.
You: Are you paying attention to me?
You: I already told you it's V1.
Daphne L. J: They will call or email you. Please double check if these informations are correct:
Name :
Phone Number :
E-Mail Address :
You: I told you I want to send you my WRT1900AC and get a V2 or I want a EA8500 and pay the difference myself.
You: I want them to contact me to my email. I can't answer the phone during work hours.
Daphne L. J: We can't assure you if we will be able to replace it with Version 2 or if you are allowed to have the EA8500 instead.
Daphne L. J: Just in case, do you also have an alternate number?
Daphne L. J: Also, what time zone are you in? And what is your preferred time and day for them to contact you?
You: I have the one from my office in Mexico. Central Time. Any time is good.
Daphne L. J: So, you are currently in Mexico?
You: I work in Mexico but I have the house in USA. I live in the border.
Daphne L. J: I see. Do you have any other questions or clarifications?
You: I live 10 minutes away from the International Bridge. But that's not an issue. I bought the router at Walmart in Laredo, TX.
Daphne L. J: Thank you for the information. Would that be all for now?
You: I want a clarification: Do you realize that there is an issue with the current WRT1900AC? Are you aware of that?
You: Because this is a very expensive router that is not working as it should be.
Daphne L. J: Yes, we are aware of the issue and are working on a resolution.
Daphne L. J: Would there be anything else you need?
You: That would be it. I will wait for you to contact me.
You: Thanks.
Daphne L. J: Alright. Thank you for giving us an opportunity to serve you through Linksys Live Chat. You may also visit our support site at www.linksys.com. For your reference, your case number is 04980394. Thank you for choosing Linksys and have a great day! We paid $250 for this piece of equipment. That's a lot of money for a device that doesn't work. I just want to get a V2 replacement, or better yet, an exchange for a EA8500. We should all demand this. It is not fair for us. The current WRT1900AC is a useless device. They even should do a recall of the product. I will wait for them to contact me, but I'm thinking if I should send the information to The Consumerist or someone else. What to do?

Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

G Mail will not work properly everything goes into the trash

Just got an I Pad air my first I Pad. I can't not get my gmail to work properly. Everything goes in the trash. Please Help

Hi,
In the Applications/Utilities folder is the Console App.
Launch this.
Try launching one of these two app again and tell us what error messages seem to appear.
(you may have to anonymise the info)
9:48 pm Sunday; March 16, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I have an early 2011 macbook air 13..just installed windows 7 64 bit and my trackpad does not works and also my backlit keyboard does not function.tried almost everything. No help

I am using Macbook air 13". i have installed windows 7 professional on it. I downloaded windows support drivers using bootcamp. Even after installation of drivers my trackpad does not works. Tap & swipe features does not work.i am using a wireless mouse. Also there is no light in my keyboard anymore.
I did try all possible help i could found on internet. But no go.

Hi Thank you, the apple mobile service links did not work, i had tried them all. however that same link with the previous versions worked. I had to download the one below and I can at least use itunes.
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
I tried this one but it did not work.
iTunes 12.1.0.71 for Windows (64-bit) - itunes6464setup.exe(2015-01-28)

HT201401 my iPhone 4s camera is not working properly, when i use the camera with keeping led flash on it doesn't give me clear picture. why is it so..???

is there anyone who can dare to solve my problem

I had the same problem. I removed my home network from the list then deselected it from available networks. It's been great since then.

My JQuery/CSS is not working properly in Firefox on the first load. After hitting refresh, it works fine.

I am a very amateur web designer, who is also very new to CSS, so please be gentle…
I am having a very frustrating issue with Firefox. My website is designed so that when my main menu navigation bar is too long for the screen, it automatically converts into a drop down menu. Naturally, this function is to better serve mobile and tablet devices.
This feature works perfectly on every browser except for Firefox. With Firefox, my main navigation menu bar is converted to a drop down menu, even though I am viewing it on a standard laptop, not a tablet or mobile device.
AND, as soon as I refresh the page, it displays just fine. And, as long as I don’t clear my history or cache, it will continue to display just fine.
Not a “huge” deal, but super annoying that new visitors to my site who are using Firefox get this experience as their first experience.
I have studied my CSS code for hours, searched through countless numbers of CSS forums for help, tweaked every bit of code I thought was relevant, and I am completely baffled.
I do realize that a simple JQuery is what tests the menu size, so it's probably something wrong there? Or maybe there is some sort of overstack issue occurring? Maybe not. Who knows – as I say, I am an amateur.
If anyone could look at my code and give me some help, I would be very appreciative.
My website is http://mikerylander.com
Thanks!
PS: This is the first time I’ve not been able to solve a CSS or HTML problem on my own, so hopefully the answer isn’t something ridiculously easy.

I see the menu when the browser window is wider than about 1180px.<br />
If the window is smaller than I get the menu button.<br />
In Google Chrome this works the same.
A good place to ask advice about web development is at the mozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the mozillaZine forum site in order to post at that forum.

My iPod does not work properly when plugged into the computer. How to fix?

I have a 4th generation 40 gigabyte iPod, non-color.
Today, I plugged it into my computer to update my playlists.
My iTunes and Windows were lagged down. Eventually, when things caught up, my iTunes didn't show my iPod as being connected. I looked in My Computer, and it didn't say iPod -- it said "Removable Disk". I couldn't disconnect my iPod via Windows, even using the Safely Remove Hardware didn't work.
After looking around here and trying things like Disk Mode and Resetting the iPod, nothing worked. I can't get the iPod to work with the iPod Updater so I can try restoring it.
I dunno really what to do. If it's a hardware problem, then I'm not going to bother to get it repaired, since the music that's currently on it plays perfectly fine still.
I just dunno what else to try.

you basically are stuck. apple won't do crap for you. i went to the apple store today because my second ipod crashed (the first one they replaced) and they won't do anything for me and told me i had to buy a new one (2 in 1 1/2 years is what happened) so they wanted me to buy a third one when their product obviously *****. and the manager even basically admitted that the ipod that they claim is durable and relible isn't. that people go through 3-4 a year. the supposed "apple genius" told me to send it out to a third party repair. he wouldn't even look at it and lectured me for not getting the extended warranty. if you look at the website below and read you'll find that a lot of people got screwed over like me with the extended warranty;
http://www.consumeraffairs.com/computers/apple_ipod.html
put it this way i won't go back to that apple store again or purchase another ipod. ill keep my piece of none working crap

HT3728 since Oct 25 my time capsule is not working properly. I enter the time machine to check my backups and the only thing I see is balck screen on every single day since I put it to work on my house. Any ideas on what's going on?

I am having problems with my time capsule.
It's not backing up... if I enter the time machine, all I see is a black page, any day I look, since the day I bought it.
Was not like this before Oct 25...
Any ideas on what's going on and what should I do to make it work again?

Check the USB cable first to make sure that it is operating correctly on another connection.
You may need to use a powered USB hub with the drive since the USB port on the Time Capsule is not a high powered port like you have on your Mac.
You may need to use the powered hub even if the hard drive has its own external power supply.

Pre populate adapter not working properly on one of the managed server

Hi,
We have two managed servers for OIM 10g. A load balancer has also been installed for directing the traffic on to these two servers i.e. z1 and z2. So whenever, the request is redirected to z2 server, pre populate adapters for AD and ACF2 resource provisioning fails. The same is working perfectly when the request goes to z1 server.
We checked the below logs but didnt find any fruitful outcome.
1. xellacf.log-- log file for ACF2
2. xellAD.log-- log file for AD
3. xell.log
Please help us out. Let me know if you need any other information.
Any inputs would be highly appreciated.
Thanks,
Garima

have you uploaded jars in DB using UploadJar utility? verify same in OIMHOME_JARS under OIM schema.
Provide the detail error log <OIM_DOMAIN>/servers/oim_server2/logs/oim_server2.log and diagnostic log as well
--nayan

Ipod touch not working properly. need help on wether or not to replace battery or something else.

My iPod touch 4th generation 8g is acting up. when i touch an app, it loads like normal but then goes black for about 2 seconds then returns to the normal screen where all the apps are. my music won't play for a long amont of time either (for example about 5 to 10 min.) without going black and freezing for about 2 seconds and returning to the regular scree. my 90 day warrenty has been up for a while and i was wondering if it could possibly be the battery and maybe i should just get the battery replaced, or if any of you have suggestions, i am all ears! Help! and the Apple service company was no help and said i had to buy a package plan in order to get phone service!

The warranty is for one year unless you purchased AppleCare which extends it for a total of two years. The 90 days is for free phone support.
Try in order:
- Reset the iPod, Nothing will be lost,
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes onthe computer
- Restore the iPod to factory defaults/new iPod, also via iTunes
If you still have a problem then you likely have a hardware problem and make an appointment at the Genius Bar of an Apple store. If defective, you should walk out with a refurbished iPod.
For how to restore, see the restoring topic of:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

Iphone 4s meeting invitation not working properly also Siri in the UK not 100%!!

Similar Messages

Maybe you are looking for