Apple TV stays on issue

I have 2 Apple TV hooked up in my house, one of the units shuts right off after using it (green light on unit goes off). The other unit on a different TV stays on for about a day before the green light goes off. Anyone know why this happens?

Thanks, something so simple I over looked. But knew this was the place to get my answer. Thanks Alley_Cat!

Similar Messages

  • Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that.

    Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • HT1688 iPhone 4S no WiFi anywhere iOS 5 after Apple Tech help same issue on iOS 6

    ISSUE  - can not connect to any WiFi hotspot at all
    Several weeks ago my daughters iPhone 4S AT&T (on iOS 5) phone number failed to connect to any WiFi hotspot on her college campus including: campus wide WiFi, Starbucks  or her Cisco 1500 WiFi in her dorm room.  She has an iPhone 4S under warranty (I think now in the range of 30-20 more days).
    The iPhone couldn't find any WiFi at all, but her roommates iPhone 4 worked perfectly everywhere on all hotspots.
    So I have been paying for massive data overage charges with AT&T because the iPhone 4S is broken.
    AT&T and then APPLE tech support first  call 4 hours long
    She rented a car and drove home 47 miles (94 miles round trip) and spent the afternoon a few Sundays ago and I spent 4 hours on the phone with AT&T and then Apple support.   I was weird I pointed our that her phone was 0.06GB over capacity e.g. a yellow caution alert in iTunes - but the Apple tech on the phone said just back it up and we would reset and restore it.
    We did all the usual stuff with AT&T and then they gave up and moved us to Apple (backups, resets, then a full system factory revert, and restore) - it was brutal I hadn't seen my daughter in 2 months and her entire visit was a tech support nightmare.
    Despite saying I did not want her to upgrade to iOS 6.X - the apple tech wanted to do a full restore BUT the restore procedure triggered an unwanted iOS 6.X upgrade  (and wiped the phone and started a massive download) without my permission - it was a slow painful 1 hour 40 minute download.  Worse yet I kept thinking that if she is 0.06GB over capacity and the iOS 6.X is "bigger" than 5.X what was going to happen to her phone ?  The apple tech got testy with me when I pointed this out I had to say "you know if a glass of water is overfilled by 0.06 and you want to replace 2 oz with 3 oz (e.g. the iOS upgrade form 5 to 6 ) then obviously it will spill some more - she didn't get it.
    So I have a near 2 hour download - scheduled a call call back but was hung up on (Apples IP phone system couldn't here me talk) and had to go back through AT&T's 611 support number support to get an Apple technician since the Apple line said it was closed - her iPhone was in a limbo 1/2 upgraded state waiting for user input in iTunes.
    During the restore (I say during not after) that her WiFi did start working while the apple tech was on the line BUT the restore was still gong on in the background - her camera roll took 16+ hours to restore ( yes sixteen hours !!!) - during which time she left the phone tethered to her Mac-book didn't use it and left her Mac-book attached to a power source. 
    Overall she says that lost some data and her also her music playlists on her phone, and it did connect to WiFi when the rep was on the line and when she first got back to the her college campus.
    Comments (not related to the issue at hand):
    1. Overall this was a very very time consuming experience - I am a computer guy (not stupid but not super Mac knowledgeable either) but it seems to me that we should be able to attache the iPhone to iTunes and Apple should be able to remote control everything instead of saying click her click there and having Apple technicians say there is a non-existent menu (she was mixed up between Mac OS-X and Windows PC iTunes) here etc. etc.. Seriously why have the end user involved this is 2012 and if the iTunes is on the Internet there is no excuse for not granting access to Apple Tech!
    2. As for iOS 6.X (I loaded it my IPhone 4) your maps are crap and useless I hate it thanks for giving me a worthless mapping system - I gout out my old GPS unit and put it back in my car.  Seriously give us back Google maps. My other daughter gets pop-ups upgrade to iOS 6 but can not load iOS 6 because it then says not enough space.  What a joke !
    ---------------------------------------ISSUE recurred after 1-2 days can not connect to any WiFi at all
    But it only worked for one (1) or two (2) days and then under iOS 6.X the same issue started happening.   Her iPhone 4S failed to connect to any WiFi hotspot on her college campus (LMU) including: campus wide WiFi, Starbucks  or her Cisco 1500 WiFi in her dorm room.  The exact same thing.
    I keep getting hammered on over use cellular charges from AT&T despite she should be cooked due to all the WiFi radiation coursing through her body on campus form both her own Cisco 1500 hotspot and the campus wide network.
    ---------------------------------------AT&T  tech support second call AT&T said the phone was broken Apple should replace
    So it only worked for one (1) or two (2) days despite my daughter driving almost 100 miles and being sucked into a a marathon 4 hour tech support nightmare with Apple.  The net result the exact same thing started happening again no WiFi capabilities again.  So I had her call AT&T at 611 and the AT&T technician talked to her looked at the lengthy case notes from the prior call e.g. the history and said that the iPhone 4S was defective phone no point in wasting another four hours of every one's time.  She was told by AT&T to go to the Apple store get the iPhone replaced as it was under warranty.
    Problem is that she has no way to get to the Apple store (no car) so I now have a 94 mile round trip to pick her up and go to an Apple store before her one (1) year warranty expires - as such I made this appointment.
    I did some more research and this seems to be a pretty big problem for people - Apple is hiding the issue hoping people just go away and they have no concept of cost and time that they force down customers throughts to debug problems.  
    It even seems like Apple actually hid a known problem from me during my initial four hour tech nightmare that Tim Cook admitted publicly on Sept 24, 2012 (last few links) see below links for further research:
    https://discussions.apple.com/thread/4351894?start=0&tstart=0
    http://forums.macrumors.com/showthread.php?t=1462046&highlight=no+wifi
    http://forums.macrumors.com/showthread.php?t=1456066&highlight=no+wifi
    http://forums.appleinsider.com/t/152837/tim-cook-acknowledges-disabled-greyed-ou t-wifi-issue
    http://bpmredux.wordpress.com/2012/0...he-little-guy/
    http://bpmredux.wordpress.com/2012/09/24/tim-cook-shows-youre-never-to-big-to-re spond-to-the-little-guy/
    All in all Apple is really dissapointing me 5 iphones and the newer they get the more bugs 3G worked great no issues, iPhone 4 no major issues, iPhone 4S buggy WiFi - never want to use an iPhone 5 form what I am reading.

    No one is going to read your lengthy post.
    If the basic troubleshooting steps outlined in the User Guide don't work, then bring your phone in for replacement.

  • TS3694 I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please

    I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • Apple, please address this issue!!! Searching and special characters

    I've found at least one other topic here regarding this issue, but Apple has yet to address it, or even confirm that it's in fact an issue.
    A big portion of my library consists of international artists, many who have special/nonstandard characters in their names (e.g. "Tiësto"). In previous versions of iTunes, I could search for "Tiesto" (note the absence of the umlaut over the 'e') and all of those tracks would appear. However, after upgrading to iTunes 9, I'm forced to search for "Tiësto" in order to view those tracks.
    Thinking about this issue, it would seem that this is normal behavior, as an artist named "Pàz" isn't necessarily the same as "Paz". But the reality is that NO ONE wants to take the time to search for the alt-code of a special character, and then type it in. Additionally, most people (including me) have a number of reasons for not renaming the artist to conform to standard characters.
    Clearly, something has changed between iTunes 8 and 9. And it's incredibly frustrating. A big chunk of my library is virtually inaccessible to me now, unless I search for terms that don't contain special characters.
    Apple, **PLEASE** address this issue. I'm not the only one with the problem and it's become a huge pain in my side to have to work around this.

    I don't see how it's sloppy or why there should be any reason that it shouldn't have given you both.
    Even putting aside that gracenote and others don't have consistent spelling in their databases, that when you download from the iTunes store, who knows what you're going to get, so that one's library could be all over the place and one might not even notice it, accents and other markings don't change the fact that a u is the same letter as ú.
    Yes, it's pronounced different. Yes, the difference is very important. But it's the same base letter. And even if it's considered a different letter in another language, in English we have 26 letters and all the accents and tildes and umlauts don't make them a new letter, which is what we're talking about here.
    It's a huge pain that looking for an album that has "Zürich" in the field and I type in "Zurich" I can't find it. I have to think about if I really do have that album, maybe I deleted it by accident, etc. And then I think to type "rich" and then it pops up.
    That's way too many steps. I don't know keyboard shortcuts and I don't want to learn them. In English, it should be letters, not characters, that count.

  • I am having problems with my burst mode on my iphone 6 plus it is slower than  the facetime camera after i updated to ios 8.3 apple please fix this issue i am fed up with all your mistakes

    i am having problems with my burst mode on my iphone 6 plus it is slower than  the facetime camera after i updated to ios 8.3 apple please fix this issue i am fed up with all your mistakes

    Gerald
    If you had taken time to read the Terms of Use you agreed on joining this Community today you would have realised that Apple is not here
    neither reading nor responding on this User Community
    http://www.apple.com/feedback/

  • How do I make Apple TV stay connected to my tv

    How do I make Apple TV stay connected in full screen format

    Stop unplugging the cable. 
    What is meant by "full screen format"?

  • Does Apple TV stay on all the time? If not, how do I turn it off?

    Does Apple TV stay on all the time? If not, how do I turn it off?

    You can put it in standby via the settings.

  • I choose french language in the menu but itunes and apple store stay in other language ??  thks U for your help, I choose french language in the menu but itunes and apple store stay in other language ??  thks U for your help

    I choose french language in the main menu but itunes
    but application apple store stay in other language ?? 
    thks U for your help

    iOS: How to change the language when it's set to one you don't understand
    http://support.apple.com/kb/HT2371
    iTunes: Changing the display language
    http://support.apple.com/kb/ht2242
    iOS: Using international keyboards
    http://support.apple.com/kb/HT4509
     Cheers, Tom

  • My iphone plus is bending, what does Apple offer regarding this issue?   I am trying to get to contact with Apple Customer Care, but not clear to me how to do it beside this channel of communication. I bought the phone from kosovar carrier which is u

    My iphone plus is bending, what does Apple offer regarding this issue?
    I am trying to get to contact with Apple Customer Care, but not clear to me how to do it beside this channel of communication. I bought the phone from kosovar carrier which is under Slovenian ownership. This means that the original warranty comes from Slovenia, bit complicated but still I would like to get an urgent answer how to proceed with this issue, thanks

    Maybe i should have only asked if anyone is aware on apple's policy
    regarding bending. I took the point that this seems not a proper forum to
    pose Q's to apple thanks to both
    On Wednesday, November 5, 2014, Apple Support Communities Updates <

  • When I plug in a Lexar thumb drive, I get a "USB Low Power Notice' saying it cannot operate because it needs more power than is available.  This is new.  Thumb drives worked last week.  Any suggestions?  Is this an apple or a Lexar issue?

    When I plug in a Lexar thumb drive, I get a "USB Low Power Notice' saying it cannot operate because it needs more power than is available.  This is new.  Thumb drives worked last week.  Any suggestions?  Is this an apple or a Lexar issue?

    Apple intentional, use a powered USB hub instead.

  • Why is the apple screen staying on?

    The apple screen stay on what should I do?

    First, try to reset by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
    If this does not help, see if you can connect in recovery mode, explained here:
    iOS: Unable to update or restore

  • Disgraceful Design Flaw and Apple Response re: Docking issues

    For everyone having issues trying to dock their Ipod Touch 4th gen the problem is clearly a design flaw with the slanted angle on the units rendering them incompatible with the majority of the docking systems of IHome / Bose / Denon or whatever. If you look at the pin on the USB cable that came with the Ipod, you'll see that it is smaller then the pins of the docking stations. I find it amazing that Apple has been entirely quiet regarding this issue even after all of the posts here about the problems people are having.
    With all the money and huge sales that Apple is enjoying, we should DEMAND---but they should have offered---an adapter---FREE !!! that will allow us to use our old IHomes/Bose/Denon...or whatever systems. SHAME ON APPLE---If they don't do something to correct this problem, they should realize that we will not purchase any other Apple products until this issue is resolved

    YEp, at first there were tons of individual complaint messages, and so I decided to create a website with a simple list of everyone having the issue. I said so in the forums and the Apple guys locked my account for bad behaviour (!!!!) and closed down the whole thread (with hundreds of messages).
    I put it up on the web, complaining out loud of this bad move for Apple PR. Even got to be interviewed by a few internet media companies from the US and Australia.. and after that I got a call from the regional executive officer of Apple Europe (in Ireland).
    They unlocked my account and agreed to inspect the case. They asked me to go to a service centre where they would exchange the cover and send the deffective one to California for testing.
    Even today, after 2 years, if you look for my name on google you get more than 1,000 results just about this issue.

  • How can I contact Apple about Screen bleeding issue ?

    Hey ,
    How can I contact Apple about Screen bleeding issue ?
    Because they have very complex website and I couldn't find the email .. !!

    think as spam took over the internet most companys stopped having a mail address you could write to
    http://store.apple.com/us/help/
    http://www.apple.com/support/contact/

  • HT201177 My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on besides the cursor. what should I do? Thanks.

    My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on. now I just re-tried and lots of pixels came up. what should I do? Thanks anyone.

    My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on. now I just re-tried and lots of pixels came up. what should I do? Thanks anyone.

Maybe you are looking for

  • Getting an unusual error message in Compressor 4.1 when I try to submit a job

    I'm running Mavericks and have Compressor 4.1 on my Mac Pro along with FCP 10.1.  When I submit a job to compressor, I then add the Dolby Digital and Mpeg-2 6.2 Mbps/90.  When I hit Start Batch I get this error message /var/folders/k9/f6fyk4sj4f3_rj2

  • How to register a custom form under "LEASE -- TOOLS"?

    Hi, This is my first form development in Oracle Apps. I have a requirement of building a custom form and to display it under LEASE -- > TOOLS. I could register the form under a menu by the following steps: 1. Application Developer --> Forms : Enter t

  • Need help hooking up Omega Vacuum Sensor?

    I need some help connecting a Omega Vacuum Sensor (PX141-015v5v) to a Feed Through Module on a SC-2345. I am confused on which wires go where. I am using LabView 7.0 for DAQ. Any programming tips would be helpful too. Thanks

  • Item category for STO

    Hi,     Is there any item category for STO line item just like 3rd party(TAS)? How do i track in a sales order a line item related to STO, a line item is from standard plant? Do we store any PO numbers for those line items like "STO" and "3Rd party"?

  • Comparison of dates using Oracle Business Rule

    Hi to everyone! I have a business rule that has as input parameter a complex attribute with a date field inside named expiration. I want to compare the expiration field with the current date using a comparison function. I don't know where find the cu